T492D156K020AC4251 KEMET | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 One WORLD One Brand One Strategy One Focus One Team One KEMET Benefits
- Established reliability options
- Taped and reeled per EIA 481-1
- Symmetrical, compliant terminations
- Laser-marked case
- 100% surge current test available on all case sizes
- Qualified to MIL-PRF-55365/8, Style CWR11
- Termination options B, C, H, K
- Weibull failure options B, C, and D
- Voltage rating of 4-50 VDC
- Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and filtering in military and aerospace applications requiring CWR11 devices. Overview The KEMET T492 series is approved to MIL-PRF-55365/8 (CWR11) with Weibull failure rates of B level (0.1% failures per 1000 hours), C level (0.01% failures per 1000 hours), or D level (0.001% failures per 1000 hours). This CWR11 product is a precision-molded device, with compliant terminations and indelible laser marking. This is the military version of the global IEC/EIA standard represented by KEMET's T491 Series. Tape and reeling per EIA 481-1 is standard. MIL-PRF (CWR Style) Established Reliability T492 CWR11 Style Mil-PRF-55365/8 Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8
Ordering Information
*See www.kemet.com for Pb Free transition. Performance Characteristics Item Performance Characteristics Operating Temperature -55°C to 125°C Rated Capacitance Range 0.1µF - 100µF @ 120 Hz/25°C Capacitance Tolerance J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 4V - 50V DF(120Hz) Refer to Part Number Electrical Specification Table ESR (100kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01CV (µA) at Rated Voltage after 5 minutes T 492 D 156 K 020 A C 4251 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/Design Lead Material Surge (C-Spec) T = Tantalum CWR 11 Established Reliability A = 3216-18 B = 3258-19 C = 6032-25 D = 7343-31 First two digits represent significant figures. Third digit specifies number of zeros. J = ±5% K = ±10% M = ±20% 006 = 6.3V 010 = 10V 015 = 15V 020 = 20V 025 = 25V 035 = 35V 050 = 50V A = N/A B = 0.1%/1000 hrs C = .01%/1000 hrs D = .001%/1000 hrs C = Hot Solder Dipped H = Standard Solder Coated (SnPb 5% Pb minimum) B = Gold Plated K = Solder Fused 4250= 25C after Weibull 4251 = -55C and 85C after Weibull 4252 = -55C and 85C before Weibull
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Qualification Test Condition Characteristics Endurance 85°C @ Rated Voltage, 2000 Hrs. 125°C @ 2/3 Rated Voltage, 2000 Hrs. ΔC/C Within ± 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Storage Life 125°C @ 0 Volts, 2000 Hrs. ΔC/C Within ± 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Thermal Shock Mil-Std-202, Method 107, Condition B, mounted, -55C° to 125°C, 1000 cycles ΔC/C Within ± 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Temperature Stability Extreme temperature exposure at a succession of continuous steps at +25ºC, -55ºC, +25ºC, +85ºC, +125ºC, +25ºC. DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL Surge Voltage 25°C and 85° C, 1.32 x Rated Voltage 1000 cycles (125°C, 1.2 x Rated Voltage) ΔC/C Within ± 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Mechanical Shock/Vibration Mil-Std-202, Meth. 213, Cond. I, 100G Peak Mil-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G Peak ΔC/C Within ±10 of initial value DF Within initial limits DCL Within initial limits Additional qualification tests per MIL-PRF-55365/8 *IL = Initial Limit Certification Mil-PRF-55365/8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8
Electrical Characteristics
0.01 0.1 100 100 1,000 10,000 100,000 1,000,000 10,000,000 Capacitance (µF) Frequency (Hz) T492B225/020 T492C685/020 T492D156/020 Capacitance vs. FrequencyESR vs. Frequency 0.1 100 1000 100 1,000 10,000 100,000 1,000,000 10,000,000 Impedance, ESR (Ohms) Frequency (Hz) T492B225/020_IMP T492C685/020_IMP T492D156/020_IMP T492B225/020_ESR T492C685/020_ESR T492D156/020_ESR Dimensions – Millimeters (Inches) Metric will govern Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-C-55365/8 specified dimensions Case Size Component KEMET EIA L* W* H* F* ±0.1 ±(.004) S* ±0.3 ±(.012) B* ±0.15 (Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 B 3528-21 3.5 ± 02 (138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.2 C 6032-28 6.0 ± 0.3 (.236 ± .03) 3.2 ± 0.3 (.126 ± .012) 2.5 ± 0.3 D 7343-31 7.3 ± 0.3 (287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 Termination cutout at KEMET’s Option, either end
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number Mil-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity 105ºC 120Hz KEMET/EIA (See below for part options) (See below for part options) +20ºC +20ºC 120Hz +20ºC 100kHz Temp≤260 ºC VDC µF µAmps % Max mOhms J-STD-020D VDC µF KEMET/EIA (see below for part options) (see below for part options) µAmps % Max mOhms J-STD-020A 105ºC 120Hz +20ºC +20ºC +20ºC 100kHz Temp≤260 ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number Mil-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity Other part number options: Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance). Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance). Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H) Also available on large (13 inch) reels. Add 7280 to the end of the part number. Table 1 – Ratings & Part Number Reference
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Other part number options: Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance). Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance). Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H) Also available on large (13 inch) reels. Add 7280 to the end of the part number. Table 1 – Ratings & Part Number Reference con't Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number Mil-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity 105ºC 120Hz KEMET/EIA (See below for part options) (See below for part options) +20ºC +20ºC 120Hz +20ºC 100kHz Temp≤260 ºC VDC µF µAmps % Max mOhms J-STD-020D VDC µF KEMET/EIA (see below for part options) (see below for part options) µAmps % Max mOhms J-STD-020A 105ºC 120Hz +20ºC +20ºC +20ºC 100kHz Temp≤260 ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number Mil-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Recommended Voltage Derating Guidelines Ripple Current/Ripple Voltage T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = √P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) Case Code Maximum Power Dissipation (Pmax) mWatts @ 25°C w/+20°C Rise KEMET EIA A 3216-18 75 B 3528-21 85 C 6032-28 110 D 7343-31 150 X 7343-43 165 E 7260-38 200 R 2012-12 25 S 3216-12 60 T 3528-12 70 U 6032-15 90 V 7343-20 125 T510X 7343-43 270 T510E 7260-38 285 Temperature Compenstion Multipliers for Maximum Power Dissipation ≤25°C 85°C 125°C 1.00 0.90 0.40 20% 40% 60% 80% 100% 120% -55 25 85 125 % Working Voltage % Change in Working DC Voltage with Temperature Temperature (ºC) 67% 33% Recommended Maximum Application Voltage (As % of Rated Voltage)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). ¹ Height of these chips may create problems in wave soldering. ² Land pattern geometry is too small for silkscreen outline. Temperature Permissible Transient Reverse Voltage 25° C 15% of Rated Voltage 85° C 5% of Rated Voltage 125° C 1% of Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Time Temperature Tsmin 25° C to Peak tL tS tP Tsmax TL TP Max Ramp Up Rate = 3° C/sec Max Ramp Down Rate = 6° C/sec Soldering Process KEMET’s families of surface mount tantalum capacitors are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivety testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3mm maximum) dictates care in wave process development. Time/Temperature Soldering Profile Profile Feature Sn-Pb Assembly Pb-Free Assembly Preheat/Soak Temperature Min (T Smin) 100°C 150°C Temperature Max (T Smax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec Ramp-up rate (T L to TP) 3°C/sec max 3°C/sec max Liquidous temperature (T L) 183°C 217°C Time above liquidous (t L) 60-150 sec 60-150 sec Peak Temperature (T P) 220°C* 235°C** 250°C* 260°C** Time within 5°C of max peak temperature (t P) 20 sec max 30 sec max Ramp-down rate (T P to TL) 6°C/sec max 6°C/sec max Time 25°C to peak temperature 6 minutes max 8 minutes max Note 1: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * Case Size D, E, P, Y and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z Construction MNO2 /Ta2O5/Ta Silver Adhesive Carbon Silver Paint Washer Tantalum Wire Weld Leadframe (-Cathode) Leadframe (+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Capacitor Marking KEMET CWR 11 Style Rated Voltage 156 25 K 030 J Polarity Indicator (+) Picofarad Code KEMET ID PWC* * 010 = 30th week of 2010 Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Tape & Reel Packaging Information KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Table 4 – Packaging Quantity Case Code Tape Width-mm 7" Reel* 13" Reel* KEMET EIA R 2012-12 8 2,500 10,000 I 3216-10 8 3,000 12,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 M 3528-15 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 5,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E 7260-38 12 500 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions Table 5 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 D1 Min. Note 1 E1 P0 P2 R Ref. Note 2 S1 Min. Note 3 T Max. T1 Max. 8mm 1.5 +0.10/-0.0 1.0 (0.039) 1.75 ± 0.10 (0.069 ± 0.004) 4.0 ± 0.10 (0.157 ± 0.004) 2.0 ± 0.05 (0.079 ± 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004)12mm 1.5 (0.059) (1.181)16mm Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Max. Note 4 E2 Min. F P1 T2 Max W Max A0,B0 & K0 8mm Single (4mm) 4.35 (0.171) 6.25 (0.246) 3.5 ± 0.05 (0.138 ± 0.002) 4.0 ± 0.10 (0.157 ± 0.004) 2.5 (0.098) 8.3 (0.327) Note 512mm Single (4mm) & Double (8mm) 8.2 (0.323) 10.25 (0.404) 5.5 ± 0.05 (0.217 ± 0.002) 8.0 ± 0.10 (0.315 ± 0.004) 4.6 (0.181) 12.3 (0.484) 16mm Triple (12mm) 12.1 (0.476) 14.25 (0.561) 5.5 ± 0.05 (0.217 ± 0.002) 8.0 ± 0.10 (0.315 ± 0.004) 4.6 (0.181) 16.3 (0.642) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defi ned by A 0, B0 and K0 shall surround the component with suffi cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4). (e) for KPS Series product A 0 and B0 are measured on a plane 0.3mm above the bottom of the pocket. (f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements. Po T F W Center Lines of Cavity Ao Bo User Direction of Unreeling Cover Tape Ko B1 is for tape feeder reference only, including draft concentric about B o. ØD1 ØDo Embossment For cavity size, see Note 1 Table 5 [10 pitches cumulative tolerance on tape ±0.2 mm]
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Figure 6 – Reel Dimensions Table 7 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Min C D Min 8mm 178 ± 0.20 (7.008 ± 0.008) or 330 ± 0.20 (13.000 ± 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 20.2 (0.795)12mm 16mm Variable Dimensions — Millimeters (Inches) Tape Size N Min W1 W2 Max W3 8mm (1.969) 8.4 +1.5/-0.0 14.4 (0.567) Shall accommodate tape width without interference12mm 12.4 +2.0/-0.0 18.4 (0.724) 22.4 (0.882) A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm min.) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Other KEMET Resources Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifi cally disclaim – any warranty concerning suitability for a specifi c customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Tools Resource Location Confi gure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products http://www.kemet.com/products Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers RoHS Statement http://www.kemet.com/rohs Quality Documents http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request http://www.kemet.com/sample Engineering Kit Request http://www.kemet.com/kits Contact Resource Location Website www.kemet.com Contact Us http://www.kemet.com/contact Investor Relations http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 KEMET Corporation World Headquarters
2835 KEMET Way
Simpsonville, SC 29681 Mailing Address: P .O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offi ces Fort Lauderdale, FL Tel: 954-766-2800 North America Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 West Chester, PA Tel: 610-692-4642 Central Schaumburg, IL Tel: 847-882-3590 Carmel, IN Tel: 317-706-6742 West Milpitas, CA Tel: 408-433-9950 Mexico Zapopan, Jalisco Tel: 52-33-3123-2141 Europe Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Paris, France Tel: 33-1-4646-1009 Sasso Marconi, Italy Tel: 39-051-939111 Milan, Italy Tel: 39-02-57518176 Rome, Italy Tel: 39-06-23231718 Madrid, Spain Tel: 34-91-804-4303 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Dortmund, Germany Tel: 49-2307-3619672 Kwidzyn, Poland Tel: 48-55-279-7025 Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Färjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000 Asia Northeast Asia Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation.