CWR11DB105MBA KEMET | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630020

  • Established reliability military version of Industrial Grade T491 series
  • Taped and reeled per EIA 481-1
  • Precision-molded, laser-marked case
  • Symmetrical, compliant terminations
  • 100% Surge Current test available for all case sizes
  • Operating Temperature: -55˚C to + 125˚C
  • Qualified to MIL-PRF-55365/8, Style CWR11: – Term ination Options B, C, H, K –W e ibull failure rate codes B, C and D – Capac itance values and voltages as shown in following part number table. (Contact KEMET for latest qualification status) DIMENSIONS – Millimeters (Inches) T492 SERIES ORDERING INFORMATION — KEMET Part Number ORDERING INFORMATION — MIL-PRF-55365 Part Number # Note on Failure Rates: Exponential failure rate levels M, P, R and S are inactive for new design per Mil-C-55365. Parts qualified to Weibull failure rate levels are substitutable for exponential failure rate levels. /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 T492 OUTLINE DRAWINGS * Part Number Example: T492B105K035BS (14 digits - no spaces) * See www.kemet.com for Pb Free transition. Surge Current Option 4250 = +25°C after Weibull 4251 = -55° +85°C after Weibull 4252 = -55, & +85°C before Weibull Lead Material B = Gold C = Hot Solder Dip H or S = Solder Plated K = Solder Fused Capacitance Tolerances M = ±10%; K = ±10%; J = ±5% Failure Rate Symbol S (0.001%/1000 hrs.) # Exponential not recommended for new design Tantalum Series T492 - Precision Molded, Style CWR11 Case Size A, B, C, D Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. T 492 B 105 K 035 B S 4250 Voltage As shown Surge Current Option A = +25°C after Weibull B = -55°C +85°C after Weibull C = -55°, & +85°C before Weibull Z = None Capacitance Tolerances Failure Rate Symbol Weibull: B (0.1%/1000 hrs.) #Exponential: M (1.0%/1000 hrs.) P (0.1%/1000 hrs.) Style Capacitors, Chip, Fixed Tantalum Established Reliability, (encapsulated) Voltage D = 6V J = 20V F = 10V K = 25V H = 15V M = 35V Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. CWR11 M H 105 K B A Termination Finish Code B = Gold Plated C = Hot Solder Dipped H = Solder Plated K = Solder Fused # Inactive for New Design Case Size Component KEMET EIA L* W* H* K* ± 0.20 ± (.008) F* ± 0.1 ± (.004) S* ± 0.3 ± (.012) B ± 0.15 (Ref) ± .006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.9 (.035) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) B 3528-21 3.5 ± 0.2 (.138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.2 (.075 ± .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) C 6032-28 6.0 ± 0.3 .236 ± .012 3.2 ± 0.3 (.126 ± .012) 2.5 ± 0.3 (.098 ± .012) 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) D 7343-31 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 (.110 ± .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) Notes: 1. Metric dimensions govern 2. (Ref) Dimensions provided for reference only * Mil-PRF-55365/8 Specified Dimensions SOLID TANTALUM CHIP CAPACITORS T492 SERIES – Style CWR11 Per Mil-PRF-55365/8

Indicator (+) Picofarad Code KEMET I. D. Symbol Rated Voltage 156 20 K 513 J Jan Brand Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "513" = The 13th week of 2005 DC DF ESR Capaci- Leakage % @ +25 /H11034C /H9024 @ +25/H11034C tance Case KEMET M il-C-55365/8 /H9262A @ +25/H11034C 120 Hz 100kHz /H9262FS ize Part Number Part Number Max Max Max SOLID TANTALUM CHIP CAPACITORS T492 SERIES—Style CWR11 Per Mil-PRF-55365/8 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONSTRUCTION CAPACITOR MARKINGS T492 Series — All Case Sizes Note on Failure Rates: Exponential failure rate levels M, P, R and S are inactive for new design per MIL-C-55365. Parts qualified to Weibull failure rate levels are substitutable for exponential failure rate levels. Note: ESR limits are per Mil-C-55365/8 T492 (CWR11) RATINGS AND PART NUMBER REFERENCE Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Molded Case Silver Adhesive Washer Positive Termination Weld Polarity Stripe (+) Polarity Bevel (+) Solid Tantalum Surface Mount Sn/Pb (5% Pb minimum) Capaci- tance μF Case Size KEMET Part Number Mil-C-55365/8 Part Number DCL μA @ +25°C Max DF % @ +25°C 120 Hz Max ESR :Capaci- tance μF Case Size KEMET Part Number Mil-C-55365/8 Part Number DCL μA @ +25°C Max DF % @ +25°C 120 Hz Max ESR : @ +25°C 100kHz Max (1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10% or J for ±5% tolerance. (3) To complete KEMET part number, insert Termination Finish Designation B = Gold; C = Hot Solder Dipped; S = Solder Plated; K = Solder Fused. (4) To complete KEMET part number, insert 4250 = +25°C after Weibull; 4251 = -55° + 85°C after Weibull; or 4252 = -55, & +85°C before Weibull Surge Current Option. (5) To complete CWR part number, insert A = +25°C after Weibull; B = -55° + 85°C after Weibull; C = -55°, & + 85°C before Weibull or Z = None for Surge Current Option. (6) To complete CWR part numbers, insert B = Gold; C = Hot Solder Dipped; H or S = Solder Plated; K = Solder Fused

35 Volt Rating at +85°C (23 Volt Rating at +125°C)

10 Volt Rating at +85°C (7 Volt Rating at 125°C)

6 Volt Rating at +85°C (4 Volt Rating at +125°C)

15 Volt Rating at +85°C (10 Volt Rating at +125°C)

20 Volt Rating at +85°C (13 Volt Rating at +125°C)

25 Volt Rating at +85°C (17 Volt Rating at +125°C)

Note: T492 Packaging

  • No c-spec required for 7” reel packaging
  • C-7280 required for 13” reel packaging
  • Standard reel packaging is not mandatory
  • Bulk packaging also available using C-7610 See page 91 for tape and reel quantities.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only (+) (–) Embossed Carrier Embossment Top T ape Thickness .10mm (.004") Max Thickness 8mm ±.30 (.315 ±.012") or 12mm ±.30 (.472 ±.012") 178mm (7.00") or 330mm (13.00") 8mm (0.315") or or 330mm (13.0") QUANTITIES PACKAGED PER REEL Case Code Tape KEMET EIA Width-mm 7" Reel* 13" Reel* R 2012-12 8 2,500 10,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 U 6032-15 12 1,000 5,000 W 7343-15 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E 7260-38 12 500 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Packaging * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165/H11034to 180/H11034from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A 0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not pro- trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size D 0 EP 0 P2 T Max T 1 Max and +0.10 -0.0 +0.004, -0.0) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B 1 Max. D 1 Min. F P 1 R Min. T 2 Max W A 0B0K0 Note 1 Note 2 Note 3 Note 4 (4 mm) TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information