T491A224K035AT

T491A104M035AT KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 100

Technical content

• Solid & Organic Tantalum
• Multilayer Ceramic
• Solid Aluminum www.kemet.com F-3102M 03/07

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS PAGE CONDUCTIVE POLYMER CHIP CAPACITORS PAGE ALUMINUM ORGANIC CAPACITORS PAGE CERAMIC CHIP CAPACITORS PAGE Mil-PRF-123 and GR900 high-reliability ceramic chips are also available. Refer to KEMET Catalog F-3054 for detailed information. TANTALUM & CERAMIC CHIP PACKAGING PAGE Notice Although the information in this catalog has been carefully checked for accuracy, and is believed to be correct and current, no warranty, either express or implied, is made as to either its applicability to, or its compatibility with, specific requirem ents; nor does KEMETElectronics Corporation assume any responsibility for correctness of this information, nor for damages con- sequent to its use. All design characteristics, specifications, tolerances, and the like are subject to change without notice. The KEMET website (www.kemet.com) should be consulted for the very latest information on design characteristics, specifi- cations, applications, and newly-released products, since previously-issued printed information may not be current. Any capacitors misapplied may fail and thereby damage other circuit components. Please refer to application notes and rec- ommendations in this catalog for a complete description of capacitor characteristics.

20°

KEMET’s family of solid tantalum chip capacitors is designed and manufactured with the demanding requirements of surface mount technology in mind. These devices extend the advantages of solid tan- talum technology to today’s surface mount circuit applications. Complementing multilayer ceramic chip convenience with capacitance ratings through 1500 µF, tantalum chip capacitors permit circuitdesigners to take full advantage of the benefits of surface mount technology. T491 Series — Industrial The leading choice in today’s surface mount designs is the KEMET T491 Series. This product meets or exceeds the requirements of EIA standard 535BAAC. The physical outline and dimensions of this series conform to this global standard. Five low profile case sizes are available in the T491 family. The R/2012-12, S/3216-12 and T/3528-12 case sizes have a maximum height of 1.2 mm. The U/6032-15 size has a maximum height of 1.5 mm, and the V/7343-20 has a maximum height of 2.0 mm. This product was designed specifically for today’s highly automated surface mount processes and equip- ment. This series uses the same proven solid tanta- lum KEMET technology acclaimed and respected throughout the world. Added to this is the latest in materials, processes and automation which result in a component unsurpassed worldwide in total perfor- mance and value. The standard terminations are 100% matte tin and provide excellent wetting characteristics and compatibil- ity with today’s surface mount solder systems. Tin-Lead (SnPb) terminations are available upon request for any part number. Gold-plated terminations are also available for use with conductive epoxy attachment processes. The symmetrical terminations offer total compliancy to provide the thermal and mechanical stress relief required in today’s technology. Lead frame attachments to the tantalum pellet are made via a microprocessor- controlled welding operation, and a high temperature silver epoxy adhesive system. Standard packaging of these devices is tape and reel in accordance with EIA 481-1. This system pro- vides perfect compatibility with all tape-fed placement units. T492 Series — Military KEMET is approved to MIL-PRF-55365/8 (CWR11), Weibull failure rate “B” level or 0.1% fail- ures per 1,000 hours, “C” level or 0.01% failures per 1,000 hours, and “D” level or 0.001% failures per 1,000 hours. This CWR11 product — designated as KEMET’s T492 Series — is a precision-molded device, with compliant leadframe terminations and indelible laser marking. This is the military version of the global IEC/EIA standard represented by KEMET’s T491 Series. Tape and reeling per EIA 481-1 is standard. T493 Series — Military - COTS The T493 series is designed for the COTS (Commercial-Off-The-Shelf) requirements of military/aerospace applications. This series is a sur- face mount tantalum product offering various lead- frame surface finishes, Weibull grading and surge cur- rent testing options. The full part number includes a code defining the terminations, the Weibull reliability, surge test conditions, and the ESR range. The possi- ble terminations include gold plated, hot solder dipped, solder plated, and solder fused. Reliability grading of B level (0.1%/kHours) and C level (0.01%/kHours) are available. Surge current testing options include: 10 cycles at 25ºC, or 10-cycles at -55ºC and +85ºC. Both standard and low ESR options are available. All lots of this series are conditioned with MIL-PRF-55365 Group A testing. T494 Series — Low ESR, Industrial Grade The T494 is a low ESR series that is available in all the same case sizes and CV ratings as the popular T491 series. The T494 offers low ESR performance with the economy of an industrial grade device. This series is targeted for output filtering and other applica- tions that may benefit from improved efficiency due to low ESR. T495 Series — Low ESR, Surge Robust The low ESR, surge robust T495 series is an impor- tant member of KEMET’s tantalum chip family. Designed primarily for output filtering in switch-mode power supplies and DC-to-DC converters, the standard CV T495 values are also an excellent choice for battery- to-ground input filter applications. This series builds upon proven technology used for industrial grade tantalum chip capacitors to offer sev- eral important advantages: very low ESR, high ripple current capability, excellent capacitance stability, plus improved ability to withstand high inrush currents. These benefits are achieved through a combination of proprietary design, material, and process parameters, as well as high-stress, low impedance electrical con- ditioning performed prior to screening. Capacitance values range from 4.7µF to 1000µF, in voltage ratings from 2.5 to 50 volts. T496 Series — Fused KEMET also offers a “fail-safe” fused solid tantalum chip capacitor. The built-in fuse element provides excellent protection from damaging short circuit condi- tions in applications where high fault currents exist. Protection from costly circuit damage due to reversed installation is offered with this device. Package sizes include the EIA standard 3528-12, 6032-15, 7343-31, and 7343-43 case size. Capacitance values range from 0.15 µF to 470.0 µF, in voltage ratings from 4 to 50. Standard capacitance tolerances include ±20% and ±10%. Tape and reeling per EIA 481-1 is standard. PRODUCTDESCRIPTION ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

T498 SERIES - High Temperature (150°C) The T498 Series is a high temperature version of KEMET's solid tantalum chip family that offers optimal performance in applications with operating tempera- tures of up to 150° C. Advancements in materials and testing have allowed for the introduction of this series which delivers a reliability level of 0.5% per 1000 hours at rated voltage at rated temperature. This series is available in five standard EIA case sizes with RoHS- Compliant/100% matte tin finish lead terminations as standard. Other termination options include 90Sn/10Pb finishes and gold for conductive adhesive attachment processes. Capacitance values range from .47µF to 220µF, in voltage ratings from 4 to 50 volts. T510 Series — High Capacitance – Low ESR The ultra-low ESR T510 Series is a breakthrough in solid tantalum capacitor technology. KEMET’s T510 Series offers low ESR in the popular EIA 7343-43 and 7360-38 case sizes. The ultra-low ESR and high ripple current capability make the T510 an ideal choice for SMPS filtering and power decoupling of today’s high speed microprocessors. KEMET has developed an innovative construction platform that incorporates multiple capacitor elements, in parallel, inside a single package. This unique assembly, combined with KEMET’s superior process- ing technology, provides the best combination of high CV, low ESR, and small size in a user friendly, molded, surface mount package. T520 SERIES— Conductive Polymer The Kemet Organic Capacitor (KO-CAP) is a Tantalum capacitor, with a Ta anode and Ta 2O5 dielectric. However, a conductive, organic, polymer replaces the MnO2 as the cathode plate of the capacitor. This results in very low ESR and improved cap retention at high frequency. The KO-CAP also exhibits a benign failure mode, which eliminates the ignition failures that can occur in standard MnO2 Tantalum types. Note also that KO-CAPs may be operated at voltages up to 90% of rated voltage for part types with rated voltage ≤ 10 volts and up to 80% of rated voltage for part types > 10 volts with equivalent or better reliability than standard tantalums operated at 50% of rated voltage. The T520 series captures the best features of mul- tilayer ceramic caps (low ESR and high frequency cap retention), aluminum electrolytics (benign failure mode), and proven solid tantalum technology (volu- metric efficiency, surface mount capability, and no wearout mechanism). The KO-CAP can reduce component counts, eliminate through-hole assem- bly by replacing cumbersome leaded aluminum capacitors, and offer a more cost effective solution to high-cost high-cap ceramic capacitors. These benefits allow the designer to save both board space and money. See pages 42-52 for complete details. T525 SERIES — High Temperature Conductive Polymer The T525 Series is a version of KEMET’s Tantalum Polymer Capacitor rated up to 125ºC. This part type was introduced as Lead (Pb) Free and offers the same advantages as the T520 KO-CAP. This includes low ESR, high frequency capacitance retention and benign failure mode. T530 SERIES — Conductive Polymer High Capacitance — Ultra Low ESR KEMET is offering a multiple anode tantalum chip capacitor with a polymer material replacing the MnO2 offering non-ignition, self-healing, 125 /H11034C performance capability with higher conductivity material that low- ers the ESR. Packaged as multiple anodes to reduce the depth that the signal must penetrate, this parallel arrangement reduces the ESR further still to achieve the highest capacitance and lowest ESR of any other type of SMT capacitor with typical ESR values as low as 5 milliohms. With the reduced ESR, the enhanced capacitance retention in higher frequencies results in the lowest total capacitance solution and provides for the most economical solution in high power applica- tions. PRODUCTDESCRIPTION ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-63004

SOLID TANTALUM CHIP CAPACITORS of equilibrium with the environment, is approxi- mately -5% to +12% over the range from 25% to 95% RH, referred to the standard 50% RH. The amount of change is dependent upon size (capaci- tance and voltage rating, ie: CV product); small sizes might change no more than ±5%. Equilibrium at such extremes is seldom attained by plastic-cased capacitors, and the change in capacitance is consequently less. The rate of response to humidity changes increases with increasing temperature. Dissipation factor and ESR also increase with increasing RH. DC leakage current may rise upon exposure to a combination of high temperature and high humidi- ty, but is normally restored by voltage conditioning under standard conditions. The increase will be greater than that experienced under temperature influence alone because of conduction through absorbed water. Tantalum chips may be affected by absorption of water on external insulating surfaces.The water film may also attract a layer of dust from the air, increasing the effect. The most sensitive parame- ter is leakage current. 4. Capacitance

• 0.1 µF to 1000 µF Refer to part number tables for available capaci- tance ratings and tolerances by series. Capacitance is measured at 120 Hz, up to 1.0 volt rms maximum and up to 2.5 volts DC maximum, at +25°C.DC bias causes only a small reduction in capaci- tance, up to about 2% when full rated voltage is applied. DC bias is not commonly used at room temperature, but is more commonly used at elevated temperatures. Capacitance decreases with increasing frequency. FIGURE1 Typical Effect of Frequency upon Capacitance Capacitance increases with increasing temperature. FIGURE2 Typical Effect of Temperature upon Capacitance Introduction KEMET solid tantalum capacitors are identified by the initial “T,” followed by a unique “Series” num- ber; for example, T491, T492, etc. Each Series denotes a general physical form and type of encapsulation, as well as limits on dimensions and certain electrical characteristics under standard conditions of 25°C, 50% relative humidity, and one atmosphere pressure. Specific requirements are set forth in the respective Product Series in this catalog. All series are 100% screened for leakage, capacitance, dissipation factor, and ESR. All Series are inspected to electrical limits using a minimum .1% AQL sampling plan, according to the Military Standard MIL-STD-105, even after 100% testing. This sampling plan, to the best of KEMET Electronics’ knowledge, meets or exceeds the generally accepted industry standard for simi- lar products. KEMET capacitors may also be sup- plied, with prior agreement, to meet specifications with requirements differing from those of KEMET cat- alogs. ELECTRICAL 1. General Application Class Solid tantalum capacitors are usually applied in circuits where the AC component is small com- pared to the DC component. Typical uses known to KEMET Electronics include blocking, by-pass- ing, decoupling, and filtering. They are also used in timing circuits. General purpose devices are rec- ommended to have an external series resistance of 0.1Ω/volt to reduce the failure due to surge cur- rent. Newer devices designed for power applica- tions (T495, T5XX), are built to eliminate this series resistance requirement. Because tantalum capaci- tors can experience scintillation (self-healing) in their life, the circuit impedence should not exceed 100KΩ or this will circumvent the scintillation and degrade leakage. 2. Operating Temperature Range Voltage derating is specified in Section 5. Performance characteristics over this temperature range are presented within the following sections. 3. Non-Operating Temperature Range
• –55°C to +125°C Tantalum capacitors do not lose capacitance from the “de-forming” effect as do liquid-electrolytic capacitors. Storage at high temperature may cause a small, temporary increase in leakage cur- rent (measured under standard conditions), but the original value is usually restored within a few min- utes after application of rated voltage. Tantalum chips are not hermetically sealed, there- fore they do exhibit reversible changes in parame- ters with respect to relative humidity (RH). Capacitance increases with increasing humidity. The limiting change, reached upon establishment TANTALUM MnO2 COMPONENTPERFORMANCECHARACTERISTICS +20% +10% -10% -20% -80 -60 -40 -20 0 +20 +60 +40 +80 +100 +120 Operating Temperature— /H11034C Percent Change in +25/H11034C Capacitance Value ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 5 Solid Tantalum Surface Mount

Surge voltage tests are performed at +25°C, +85°C and +125°C with the applicable surge volt- age. The surge voltage is applied for 1000 cycles of 30 seconds at voltage through a 33 ohm series resistor and 30 seconds off voltage with the capacitor discharged through a 33 ohm resistor. Upon completing the test, the capacitors are allowed to stabilize at room temperature. Capaci- tance, DCL and DF are then tested: a. Capacitance — within ± 5% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit 7. Reverse Voltage and Polarity TABLE 3 Reverse Voltage Ratings Temperature Permissible Reverse Voltage +25°C 15% of Rated Voltage +85°C 5% of Rated Voltage +125°C 1% of Rated Voltage Solid tantalum capacitors are polarized devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe and a beveled edge. A small degree of tran- sient reverse voltage is permissible for short peri- ods per Table 3. The capacitors should not be operated continuously in reverse mode, even with- in these limits. 8. DC Leakage Current (DCL) Refer to part number tables for maximum leakage current limits. DC leakage current is the current that, after a one- to five-minute charging period, flows through a capacitor when voltage is applied. Leakage is measured at +25°C with full rated DC voltage applied to the capacitor through a 1000 ohm resis- tor in series with the capacitor. DC leakage current increases with increasing tem- perature. TABLE 4 Leakage Limit Multipliers at Specified Temperatures (ref: 25°C limits) Ambient Temperature –55°C +85°C +125°C N/A 10X 12X TABLE 1 Maximum Capacitance Change with Temperature (ref: 25°C) Ambient Temperature –55°C +85°C +125°C *+12% is standard. +15% and 20% apply to certain extended CV values as noted in part number tables. 5. Working DC Voltage (WVDC)

• 3 to 50 volts Refer to part number tables for available voltage ratings by series. These voltages are the maximum recommended peak DC operating voltages from –55°C to +85°C for continuous duty. These voltages are derated linearly above +85°C to 2/3 rated voltage for operation at +125°C (See Figure 3). For added reliability it is recommended to operate at a 50% derating of the working voltage for tantalum capacitors with MnO 2 as a cathode. See page 39 for working DC Voltage of high temperature T498 product. FIGURE3 Working DC Voltage Change with Temperature 6. Surge Voltage TABLE2 Surge Voltage Ratings Rated Working Surge Derated Volts Voltage DC Surge @ +25°C @ +25°C Volts Voltage 3 4 2 2.4 4 5.2 2.7 3.2 68 45 10 13 7 8 16 20 10 12 20 26 13 16 25 33 17 20 35 46 23 28 50 65 33 40 SOLID TANTALUM CHIP CAPACITORS 100% 80% 60% 40% 20% -60 Operating Temperature— /H11034C Percent Change in Working DC Voltage -40 -20 0 +20 +40 +60 +80 +100 +120 +140 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-63006 TANTALUM MnO2 COMPONENT PERFORMANCECHARACTERISTICS (con’t.)

SOLID TANTALUM CHIP CAPACITORS ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 ESR — Represents the actual ohmic series resis- tance in series with the capacitance. Lead wires and capacitor electrodes are contributing sources. R L — Capacitor Leakage Resistance. Typically it can reach 50,000 megohms in a tantalum capaci- tor. It can exceed 1012 ohms in monolithic ceram- ics and in film capacitors. Rd — The dielectric loss contributed by dielectric absorption and molecular polarization. It becomes very significant in high frequency measurements and applications. Its value varies with frequency. Cd — The inherent dielectric absorption of the solid tantalum capacitor which typically equates to 1-2% of the applied voltage. As frequency increases, XC continues to decrease according to its equation above. There is unavoid- able inductance as well as resistance in all capaci- tors, and at some point in frequency, the reac- tance ceases to be capacitive and becomes inductive. This frequency is called the self-reso- nant point. In solid tantalum capacitors, the reso- nance is damped by the ESR, and a smooth, rather than abrupt, transition from capacitive to inductive reactance follows. Typical ESR/Z frequency response curves are shown in Figures 9a and 9b. These curves are for selected ratings and represent typical T491 Series performance. Maximum limits for 100 kHz ESR are listed in the part number tables for each series. Note that the T494 Series offers low ESR and the T495 Series is specially designed for very low ESR performance. Refer to page 31 for more information. See also KEMET’s T510 Series low ESR ratings on page 40. TANTALUM MnO2 COMPONENT PERFORMANCECHARACTERISTICS (con’t.) FIGURE7a Total Impedance of the Capacitor Below Resonance FIGURE7b Total Impedance of the Capacitor Above Resonance To understand the many elements of a capaci- tor, see Figure 8. XC = 1 ohm 2/H9266fC where: f = frequency, Hertz C = capacitance, Farad XL = 2/H9266fL where: f = frequency, Hertz L = inductance, Henries A capacitor is a complex impedance consisting of many series and parallel elements, each adding to the complexity of the measurement system. ESL — Represents lead wire and construction inductance. In most instances (especially in solid tantalum and monolithic ceramic capacitors) it is insignificant at the basic measurement frequen- cies of 120 and 1000 Hz. FIGURE8 The Real Capacitor ESL ESR C RL Cd Rd FIGURE9a ESR & Impedance (Z) vs Frequency

SOLID TANTALUM CHIP CAPACITORS TANTALUM MnO2 COMPONENT PERFORMANCECHARACTERISTICS (con’t.) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630010 Mounted capacitors withstand extreme temperature testing at a succession of continuous steps at order stated. Capacitors shall be brought to thermal stability at each test temperature. Capacitance, DF and DCL are measured at each test temperature except that DCL is not measured at -55°C. DC bias of 2.0± 0.5 is recommended for the capacitance and D F requirements. 14. Thermal Shock

• Mil-Std-202, Method 107, Condition B Minimum temperature -55°C, mounted Post Test Performance: a. Capacitance — within ±5% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit 15. Moisture Resistance
• Mil-Std-202, Method 106 Steps 7a and 7b excluded, rated voltage, 42 cycles, mounted Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit
• JEDEC J-STD-20C — meets MSL1 for Pb-free assembly 16. Electrostatic Discharge (ESD)
• Human Body Model 2,000 ±50 volts, 1,500 ±5% ohms, 40 nano- second pulse each polarity, 1 pulse each polarity, 5 seconds between pulses, +25/H11034C.
• Charged Device Model 200 ± 5 volts, 0 ohms, 40 nanosecond pulse, each polarity, 9 pulses each polarity, 5 seconds between pulses, +25/H11034C. Product subjected to above test condition demonstrate no sensitivity to electrostatic discharge. 17. Long Term Stability Within the general class of electrolytic capacitors, solid tantalum capacitors offer unusual stability of the three important parameters: capacitance, dis- sipation factor and leakage current. These solid- state devices are not subject to the effects of electrolysis, deforming or drying-out associated with liquid-electrolyte capacitors. When stabilized for measurement at standard conditions, capacitance will typically change less than ±3% during a 10,000 hour life test +85°C. The same comparative change has been observed in shelf tests at +25°C extending for 50,000 hours. (Some of this change may stem from instrument or fixture error.) Dissipation factor exhibits no typical trend. Data from 10,000 hour life test at +85°C show that ini- tial limits (at standard conditions) are not exceeded at the conclusion of these tests. Leakage current is more variable than capaci- tance or DF; in fact, leakage current typically exhibits a logarithmic dependence in several respects. Military Specifications permit leakage current (measured at standard conditions) to rise by a factor of four over 10,000 hour life tests. Typical behavior shows a lower rate of change, which may be negative or positive. Initial leakage currents are frequently so low (less than 0.1 nanoampere in the smallest CV capacitors) that changes of several orders of magnitude have no discernable effect on the usual circuit designs. 18. Failure Mode Capacitor failure may be induced by exceeding 50% of rated voltage of the capacitor with forward DC voltage, reverse DC voltage, power dissipation, or temperature. As with any practical device, these capacitors also possess an inherent, although low, failure rate when operated at less than 50% of the rated voltage of the capacitor. The dominant failure mode is by short-circuit. Minor parametric drifts are of no consequence in circuits suitable for solid tantalum capacitors. Catastrophic failure occurs as an avalanche in DC leakage current over a short (millisecond) time span. The failed capacitor, while called “short-cir- cuited”, may exhibit a DC resistance of 10 to 10 ohm. If a failed capacitor is in an unprotected low- impedance circuit, continued flow of current through the capacitor may obviously produce severe overheating. The over-heated capacitor may damage the circuit board or nearby compo- nents. Protection against such occurrence is obtained by current-limiting devices or fuses pro- vided by the circuit design. KEMET’s T496 series offers a built-in fuse to convert the normal short circuit failure mode to an open circuit. Fortunately, the inherent failure rate of KEMET solid tantalum capacitors is low, and this failure rate may be further improved by circuit design. Statistical failure rates are provided for military capacitors. Relating circuit conditions to failure rate is aided by the guides in the section following.

SOLID TANTALUM CHIP CAPACITORS Quality Factor: All of these multipliers are applied to the established or base failure rate of the part. The T492 Series is qualified under U.S. military specification MIL-PRF-55365. Failure rates as low as 0.001% kHr are available under this test program. For series not covered by military specifications, an internal sampling program is operated by KEMET Quality Assurance whereby parts are put on life test at rated voltage for 2000 hours. The confidence level chosen for the reporting data is 60%. (The cost of sampling each batch would be prohibitive, and no claim is made to guarantee the failure rate of each batch.) With this testing and each new qualification test for new parts, the average failure rate for all commercial Series lies between 0.1% and 1.0% per thousand- piece-hours. FIT Calculator All of these factors are gathered into a Windows based software, available free from the KEMET web site (www.kemet.com). The “FIT Calculator” software does all the calculations and look-ups based on information entered or selected by the operator. A manual may also be downloaded from the same web page to explain the controls and displays The manual as well as a help screen also detail the environmental conditions. ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Solid Tantalum Surface Mount TANTALUM MnO2 COMPONENT PERFORMANCECHARACTERISTICS (con’t.) FIGURE11b. Table for circuit resistance multipiers. RELIABILITY 19. Reliability Prediction Solid tantalum capacitors exhibit no degradation failure mode during shelf storage and show a constantly decreasing failure rate (i.e., absence of any wear out mechanism) during life tests. This failure rate is dependent upon three impor- tant application conditions; DC Voltage, ambient temperature, and circuit impedance. Additional effects are attributable to the capacitance of the device and atmospheric and mechanical expo- sure of the assembled circuit. The 1000 multiplier at the end converts the failure rate to parts-per- billion piece-hours. A prediction of the failure rate can be made using these application conditions and the formulas and tables listed in MIL-HDBK- 217F (Notice 2). Base Multiplier: The first multiplier is the base multiplier (2) established for the capacitor type. For “CWR-Chips” or surface mount components the base multiplier is 0.00005, and for “CSR- Leaded” devices, the base multiplier is 0.00040. Temperature: The temperature factor is given as (3). From this formula, it can be seen that the unity factor, or 1, is derived at an ambient temperature of +25 /H11034C (+298 /H11034K), and that at temperatures below this the multiplier is decreasing and at tem- peratures above this the multiplier is increasing. Voltage: The multiplier for application voltage (4) is a two step process: first, the application volt- age is compared to 60% of rated voltage, and then this ratio is raised to an exponential power of 17 and added to unity. Consider applications of 50%, 60%, 70%, 80% and 90% of rated volt- age. The multipliers for these applications would be 1.045, 2.00, 14.7, 134, and 986, respectively. From these results it is evident why manufactur- ers recommend application voltages not to exceed 50% rated voltages. Capacitance: There is a factor (5) applied to the capacitance (in µF) which effectively increases the failure rate for increasing capacitance (increases in effective area resulting in increases in possible faults). Series Resistance: The series resistance is only concerned with the resistance per application bias (ohms per volt) external to the capacitor, and does not include the ESR as a factor. Environmental: The environmental factor is determined by the harshness of the ambient conditions beyond temperature. An explanation of these ratings is included in the MIL specifica- tion and are too extensive to be covered here. In most cases, this factor is set to ground benign or G B, with the resulting factor equal to “1”. (1) λV = λbπTπCπVπSRπQπE x 1000 (2) λb = 0.00005CWR or 0.0004CSR (3) πT = exp[ -0.15 1 1 (4) S = Application-Voltage (6) πSR = Lookup Table πE = Lookup Table (7) πQ = ( Pcs. Fail x 100,000) Rated-Voltage πV = ( S ) + 10.6 8.617  10-5 TAmb 298 Pcs. Tested x Hrs. Tested CR (ΩV) >0.8 0.6-0.8 0.4-0.6 0.2-0.4 0.1-0.2 <0.1 πSR 0.66 1.0 1.3 2.0 2.7 3.3 FIGURE11a. MIL-HDBK-217F Notice 2 formulas.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS TANTALUM MnO2 COMPONENT PERFORMANCECHARACTERISTICS (con’t.) 20. Surge Current All conventional reliability testing is conducted under steady-state DC voltage. Experience indi- cates that AC ripple, within the limits prescribed, has little effect on failure rate. Heavy surge cur- rents are possible in some applications, howev- er. Circuit impedance may be very low (below the recommended 0.1 ohm/volt) or there may be dri- ving inductance to cause voltage “ringing.” Surge current may appear during turn-on of equipment, for example. Failure rate under current-surge conditions may not be predictable from conven- tional life test data. Capacitors are capable of withstanding a 4 ±1 second charge of rated voltage (±2%) through a total circuit resistance (excluding the capacitor) of 1 ±0.2 ohms at +25°C, followed by a 4 ±1 second discharge to a voltage below 1% of the rated volt- age. This cycle is repeated consecutively three (3) times. Post test performance: a. Capacitance — within ±5% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit 100% production surge current testing is per- formed on all Tantalum Chip series for case sizes C, D, E, X, U, V. The total test circuit resistance is ≤ 0.5 ohms. The applied voltage is 75% of rated voltage for all series except the T495 and T510 which are surged at 100% of rated voltage. Four surge cycles are applied. Parts not capable of surviving this test are removed at subsequent electrical screening. See T493 Series on page 22 for specific surge options. 21. Storage Life Test

• 2,000 hours, +125 /H11034C, Unbiased, Mounted Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit e. Physical — no degradation of function 22. Standard Life Test
• 2,000 hours, +85/H11034C, Rated Voltage, Mounted Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within 125% of initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit e. Physical — no degradation of function 23. High Temperature Life Test
• 2,000 hours, +125/H11034C, 2/3 Rated Voltage, Mounted Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within 125% of initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit e. Physical — no degradation of function MECHANICAL 24. Resistance to Solvents
• Mil-Std-202, Method 215 Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor -— within initial limit d. Physical — no degradation of case, termi- nals or marking. 25. Fungus
• Mil-Std-810, Method 508 26. Flammability
• UL94 VO Classification Encapsulant materials meet this classification. 27. Resistance to Soldering Heat
• Wave Solder +260 ±5/H11034C, 10 Seconds
• Infrared Reflow +230 ±5/H11034C, 30 Seconds
• Vapor Phase Reflow +215 ±5/H11034C, 2 minutes Post Test Performance: a. Capacitance — within ±10% of Initial Value b. DC Leakage — within Initial Limit c. Dissipation Factor — within Initial Limit 28. Solderability
• Mil-Std-202, Method 208
• ANSI/J-STD-002, Test B Applies to Solder and Tin Coated terminations only. Does not apply to optional gold-plated ter- minations. 29. Vibration
• Mil-Std-202, Method 204, Condition D,

10 Hz to 2,000 Hz, 20G Peak

Post Test Performance: a. Capacitance — within ± 10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit 30. Shock

• Mil-Std-202, Method 213, Condition I,

100 G Peak

Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit 31. Terminal Strength

• Pull Force
• One Pound (454 grams), 30 Seconds

SOLID TANTALUM CHIP CAPACITORS 100 150 200 250 300 0 50 100 150 200 250 300 Time (Seconds) Temperature (° C) 60 Sec. 45 Sec. 45 Sec. 5 Sec. 95 Sec. 90 Sec. ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630014 35. Soldering KEMET’s families of surface mount tantalum capacitors are compatible with wave (single or dual) soldering and IR or vapor phase reflow techniques. Solder-coated terminations have excellent wetting characteristics for high integrity solder fillets. Preheating of these components is recommended to avoid extreme thermal stress. Figure 13 represents recommended maximum solder temperature / time combinations for these devices. Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3mm maximum) dictates care in wave process devel- opment. TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS(con’t.) Hand-soldering should be performed with care due to the difficulty in process control. If per- formed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. The iron should be removed. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations a slight darken- ing of the gold-colored epoxy may be observed. This slight darkening is normal and is not harmful to the product. Marking permanency is not affect- ed by this change. 36. Washing Standard washing techniques and solvents are compatible with all KEMET surface mount tanta- lum capacitors. Solvents such as Freon TMC and TMS, Trichlorethane, methylene chloride, prelete, and isopropyl alcohol are not harmful to these components. If ultrasonic agitation is utilized in the cleaning process, care should be taken to minimize ener- gy levels and exposure times to avoid damage to the terminations. KEMET tantalum chips are also compatible with newer aqueous and semi-aqueous processes. Please follow the recommendations for cleaning as defined by the solder vendor. 37. Encapsulations Under normal circumstances, potting or encap- sulation of KEMET tantalum chips is not required. 38. Storage Environment Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environ- ments, solderability will be degraded by expo- sure to high temperatures, high humidity, corro- sive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp, and tape peel force may increase. KEMET rec- ommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solder- ability, chip stock should be used promptly, preferably within 3 years of receipt. 39. Component Weights

• T49x, T510 Series Sn-Pb Profile Pb-Free Profile 260˚C Peak Temperature (3 passes) FIGURE13 Time/Temperature Soldering Profile Series Case Size Typical Weight (mg) T49x A/3216-18 32 T49x B/3528-21 60 T49x C/6032-28 130 T49x D/7343-31 320 T49x X/7343-43 500 T49x E/7360-38 600 T49x R/2012-12 10 T49x S/3216-12 21 T49x T/3528-12 34 T49x U/6032-15 70 T49x V/7343-20 206 T510 D/7343-31 338 T510 X/7343-43 510 T510 E/7360-38 645

Notes: 1. Metric dimensions govern. 3. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. CASE SIZE COMPONENT KEMET R S T U V EIA 2012-12 3216-12 3528-12 6032-15 7343-20 L 2.0 ± 0.2 (.079 ± .008) 3.2 ± 0.2 (.126 .008) 3.5 ± 0.2 (.138 ± .008) 6.0 0.3 (.236 .012) 7.3 ± 0.3 (.287 ± .012) W 1.3 ± 0.2 (.051 ± .008) 1.6 ± 0.2 2.8 ± 0.2 (.1 ± .008) 4.3 ± 0.3 (.169 ± .012) H Max. 1.2 (.047) 1.2 (.047) 1.2 (.047) 1.5 (.059) 2.0 (.079) 0.3 (.012) 0.3 (.012) 0.3 (.012) 0.5 (.020) 0.9 (.035) K Min. 0.9 (.035) 1.2 (.047) 2.2 (.087) 2.2 (.087) 2.4 (.094) F ± 0.1 0.5 (.020) 0.8 (.031) 0.8 (.031) 1.3 (.051) 1.3 (.051) S ± 0.3 0.05 (.002) 0.05 (.002) 0.05 (.002) 0.05 (.002) 0.05 (.002) X (Ref) T (Ref) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) A (Min) 0.8 (.031) 1.4 (.055) 2.1 (.083) 3.1 (.122) 3.8 (.150) G (Ref) 0.5 (.020) 1.1 (.043) 1.8 (.071) 2.8 (.110) 3.5 (.138) E (Ref) 0.8 (.031) 1.3 (.051) 2.2 (.087) 2.4 (.094) 3.5 (.138) SOLID TANTALUM CHIP CAPACITORS T491 SERIES - Precision Molded Chip CAPACITOR OUTLINE DRAWING ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 15 Solid Tantalum Surface Mount 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) KEMET EIA L* W* H* X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A B C D X E 3216-18 3528-21 6032-28 7343-31 7343-43 7260-38 3.2 ± 0.2 (.126 ± .008) 3.5 ± 0.2 (.138 ± .008) 6.0 ± 0.3 (.236 ± .012) 7.3 ± 0.3 (.287 ± .012) 7.3 ± 0.3 (.287 ± .012) 7.3 ± 0.3 (.287 ± .012) 1.6 ±0.2 (.063 ±.008) 2.8 ± 0.2 (.1 10 ± .008) 3.2 ± 0.3 (.126 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.3 ± 0.3 (.169 ± .012) 6.0 ± 0.3 (.236 ± .012) 1.6 ± 0.2 (.063 ± .008) 1.9 ± 0.2 (.075 ± .008) 2.5 ± 0.3 (.098 ± .012) 2.8 ± 0.3 (.110 ± .012) 4.0 ± 0.3 (.157 ± .012) 3.6 ± 0.2 (.142 ± .008) 1.2 (.047) 2.2 (.087) 2.2 (.087) 2.4 (.094) 2.4 (.094) 4.1 (.161) 0.8 (.031) 0.8 (.031) 1.3 (.051) 1.3 (.051) 1.3 (.051) 1.3 (.051) 0.4 (.016) 0.4 (.016) 0.5 (.020) 0.5 (.020) 0.5 (.020) 0.5 (.020) 0.9 (.035) 1.1 (.043) 1.4 (.055) 1.5 (.059) 2.3 (.091) 2.3 (.091) 0.4 (.016) 0.5 (.020) 0.9 (.035) 0.9 (.035) 1.7 (.067) 0.9 (.035) 0.4 (.016) 1.0 (.039) 1.0 (.039) 1.0 (.039) 1.0 (.039) 1.0 (.039) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 1.4 (.055) 2.1 (.083) 3.1 (.122) 3.8 (.150) 3.8 (.150) 3.8 (.150) 1.1 (.043) 1.8 (.071) 2.8 (.110) 3.5 (.138) 3.5 (.138) 3.5 (.138) 1.3 (.051) 2.2 (.087) 2.4 (.094) 3.5 (.138) 3.5 (.138) 3.5 (.138) CASE SIZE COMPONENT Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. * Mil-C-55365/8 Specified Dimensions K* ± 0.20 ± (.008) S* ± 0.3 ± (.012)F* ± 0.1 ± (.004) B (Ref) ± 0.15 ± (.006)

FEATURES

• Meets or Exceeds EIA Standard 535BAAC
• Taped and Reeled per EIA 481-1
• Symmetrical, Compliant Terminations
• Optional Gold-plated Terminations
• Laser-marked Case
• 100% Surge current test on C, D, E, U, V, X sizes
• Halogen Free Epoxy
• Capacitance: 0.1 /H9262F to 1000 /H9262F
• Tolerance: ±10%, ±20%
• Voltage: 2.5-50 VDC
• Extended Range Values
• Low Profile Case Sizes
• RoHS Compliance & Lead Free Terminations (See www.kemet.com for transition information)
• Operating Temperature: -55˚C to +125˚C STANDARD T491 DIMENSIONS Millimeters (inches) T491 ORDERING INFORMATION /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 LOW PROFILE T491 DIMENSIONS Millimeters (inches) Lead MMaterial Capacitance TTolerance M = ±20%; K = ±10% Series T491 - Precision Molded Failure RRate A = Not Applicable Case SSize A,B,C,D,E,R,S,T,U,V,X Capacitance PPicofarad CCode First two digits represent significant figures. Third digit specifies number of zeros to follow. Tantalum T 491 B 105 M 035 A S* Voltage As shown *Part number example: T491B105M035AT (14 digits - no spaces). See www.kemet.com for Pb Free transition. “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix termination codes do not quarantee Pb-free product. T = 100% Tin (Sn) Plated H = Tin/Lead (SnPb 5% Pb minimum) G = Gold Plated (A,B,C,D,X only) S = Not recommended for new designs *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007.

SOLID TANTALUM CHIP CAPACITORS T491 SERIES—Precision Molded Chip ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630016 T491 TANTALUM CHIP CAPACITANCE VALUES Case Size by Capacitance and Voltage μF Code 2.5 3 4 6 10 16 20 25 35 50 0.10 104 AA 0.15 154 A A/B 0.22 224 AB 0.33 334 AA B 0.47 474 A A/B B/C 0.68 684 A A A/B B/C 1.0 105 A R/S/A A/B A/B V/C 1.5 155 A A S/A A/B B/C C/D 2.2 225 R/A A/B R/S/A A/B B/C B/C C/D 3.3 335 A A R/S/A A/B T/A/B B/C B/C D 4.7 475 A S/A A/B R/S A/B/T A/B/C A/B/C B/C/D D 6.8 685 S/A R/S A/B S/T A/B A/B/C U/A/B/C B/C C/D D/X 10.0 106 R/S A/B R/S/T A/B S/T/A B/C B/C/U T/A U/B/C B/C/D V/C/D D/X 15.0 156 S/T A/B S A/B/C U A/B/C U/A/B/C C/D C/D C/D/X X 22.0 226 S/T A/B/C U/T A/B/C T/U A/B/C U/B C/D V/C/D V/C/D D/X 33.0 336 A U A/B/C T/U A/B/C U/V B/C/D U/C V/C/D D/X X 47.0 476 U A/B/C T/U/A B/C/D U/V B/C/D V/C/D D D/X X/E 68.0 686 U/A B/C/D U/B C/D U/V B/C/D V/D D/X D/X 100.0 107 T T/U/A B/C/D U/V B/C/D V/C/D V/D/X D//E 150.0 157 V/B C/D V/C/D V/C D/X D/X 220.0 227 V/B V D/X V/D/X X 330.0 337 V/C/D D/X D/X/E 470.0 477 D/X D/X/E X/E 680.0 687 D/X E 1000.0 108 X/E Capacitance Rated Voltage @ +85°C

SOLID TANTALUM CHIP CAPACITORS T491 SERIES - Precision Molded Chip ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 17 Solid Tantalum Surface Mount T491 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert T, H, G, or S lead material designation as shown on page 15. *Extended Values **6 Volt product equivalent to 6.3 volt product. #Maximum Capacitance Change @ 125ºC=+15%. †Maximum Capacitance Change @ 125ºC=+20%. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. Capaci- tance µF Case Size KEMET Part Number DC Leakage μA @ 25ºC Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25°C 100 kHz Max 100.0 T T491T107(1)2R5A(2) 2.5 24.0 3.9 220.0 D T491D227 (1)2R5A(2) 5.5 8.0 0.3 #33.0 A T491A336(1)003A(2) 1.0 6.0 4.0 3.3 A T491A335(1)004A(2) 0.5 6.0 8.0 4.7 A T491A475(1)004A(2) 0.5 6.0 8.0 6.8 A T491A685(1)004A(2) 0.5 6.0 6.0 6.8 S T491S685 (1)004A(2) 0.5 6.0 15.0 10.0 B T491B106 (1)004A(2) 0.5 6.0 3.5 10.0 A T491A106(1)004A(2) 0.5 6.0 6.0 #10.0 S T491S106 (1)004A(2) 0.5 6.0 15.0 #10.0 R T491R106 (1)004A(2) 0.5 8.0 10.0 15.0 B T491B156 (1)004A(2) 0.6 6.0 3.5 15.0 A T491A156(1)004A(2) 0.6 6.0 4.0 15.0 T T491T156 (1)004A(2) 0.6 6.0 5.0 #15.0 S T491S156 (1)004A(2) 0.6 10.0 15.0 22.0 C T491C226 (1)004A(2) 0.9 6.0 1.8 22.0 B T491B226 (1)004A(2) 0.9 6.0 3.5 #22.0 A T491A226(1)004A(2) 0.9 6.0 4.0 #22.0 T T491T226 (1)004A(2) 0.9 6.0 5.0 22.0 S T491S226 (1)004A(2) 0.9 10.0 10.0 33.0 C T491C336 (1)004A(2) 1.3 6.0 1.8 33.0 U T491U336 (1)004A(2) 1.3 6.0 1.8 33.0 B T491B336 (1)004A(2) 1.3 6.0 3.5 #33.0 A T491A336(1)004A(2) 1.3 6.0 4.0 #33.0 T T491T336 (1)004A(2) 1.3 8.0 5.0 47.0 C T491C476 (1)004A(2) 1.9 6.0 1.8 47.0 U T491U476 (1)004A(2) 1.9 6.0 1.8 #47.0 B T491B476 (1)004A(2) 1.9 6.0 3.0 #47.0 A T491A476M004A(2) 1.9 12.0 2.5 #47.0 T T491T476M004A (2) 1.9 12.0 6.0 68.0 D T491D686 (1)004A(2) 2.7 6.0 0.8 68.0 C T491C686 (1)004A(2) 2.7 6.0 1.6 #68.0 U T491U686 (1)004A(2) 2.7 6.0 1.8 #68.0 B T491B686 (1)004A(2) 2.7 6.0 3.5 #68.0 A T491A686(1)004A(2) 2.8 30.0 4.0 100.0 D T491D107 (1)004A(2) 4.0 8.0 0.8 #100.0 C T491C107 (1)004A(2) 4.0 8.0 1.2 #100.0 U T491U107 (1)004A(2) 4.0 10.0 1.8 #100.0 B T491B107M004A (2) 4.0 8.0 0.9 †100.0 A T491A107M004A(2) 4.0 30.0 4.0 †100.0 T T491T107M004A (2) 4.0 30.0 5.0 150.0 D T491D157 (1)004A(2) 6.0 8.0 0.8 150.0 V T491V157 (1)004A(2) 6.0 8.0 0.7 #150.0 C T491C157 (1)004A(2) 6.0 8.0 1.2 †150.0 B T491B157M004A (2) 6.0 12.0 2.0 #220.0 V T491V227 (1)004A(2) 8.8 8.0 0.7 #220.0 B T491B227M004A (2) 8.8 18.0 0.5 330.0 D T491D337 (1)004A(2) 13.2 8.0 0.7 †330.0 V T491V337 (1)004A(2) 13.2 12.0 0.7 #330.0 C T491C337 (1)004A(2) 13.2 10.0 0.9 #470.0 X T491X477(1)004A(2) 18.8 8.0 0.5 #470.0 D T491D477 (1)004A(2) 18.8 8.0 0.8 #680.0 X T491X687(1)004A(2) 27.2 12.0 0.5 #680.0 D T491D687 (1)004A(2) 27.2 12.0 0.5 #1000.0 X T491X108(1)004A(2) 40.0 12.0 0.5 #1000.0 E T491E108M004A (2) 40.0 15.0 0.2 2.2 R T491R225 (1)006A(2) 0.5 6.0 25.0 2.2 A T491A225(1)006A(2) 0.5 6.0 8.0 3.3 A T491A335(1)006A(2) 0.5 6.0 8.0 4.7 A T491A475(1)006A(2) 0.5 6.0 6.0 4.7 S T491S475 (1)006A(2) 0.5 6.0 15.0 6.8 B T491B685 (1)006A(2) 0.5 6.0 3.5 6.8 A T491A685(1)006A(2) 0.5 6.0 6.0 #6.8 S T491S685 (1)006A(2) 0.5 6.0 15.0 #6.8 R T491R685 (1)006A(2) 0.5 8.0 15.0 10.0 B T491B106 (1)006A(2) 0.6 6.0 3.5 10.0 A T491A106(1)006A(2) 0.6 6.0 4.0 10.0 T T491T106 (1)006A(2) 0.6 6.0 5.0 #10.0 S T491S106 (1)006A(2) 0.6 10.0 15.0 #10.0 R T491R106 (1)006A(2) 0.6 8.0 10.0 2.5 Volt Rating at +85ºC (1.7 Volt Rating at +125ºC)

3 Volt Rating at +85ºC (2 Volt Rating at +125ºC)

4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC) **6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) Capaci- tance µF Case Size KEMET Part Number DC Leakage μA @ 25ºC Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25°C 100 kHz Max 15.0 C T491C156 (1)006A(2) 0.9 6.0 1.8 15.0 B T491B156 (1)006A(2) 0.9 6.0 3.5 #15.0 A T491A156(1)006A(2) 0.9 6.0 3.5 #15.0 T T491T156 (1)006A(2) 0.9 6.0 5.0 #15.0 S T491S156 (1)006A(2) 0.9 15.0 10.0 22.0 C T491C226 (1)006A(2) 1.4 6.0 1.8 22.0 U T491U226 (1)006A(2) 1.4 6.0 1.8 22.0 B T491B226 (1)006A(2) 1.4 6.0 3.5 #22.0 A T491A226(1)006A(2) 1.4 6.0 4.0 #22.0 T T491T226 (1)006A(2) 1.4 8.0 5.0 33.0 C T491C336 (1)006A(2) 2.0 6.0 1.8 33.0 U T491U336 (1)006A(2) 2.0 6.0 1.8 #33.0 B T491B336 (1)006A(2) 2.0 6.0 3.0 #33.0 A T491A336(1)006A(2) 2.0 12.0 2.5 #33.0 T T491T336 (1)006A(2) 2.0 12.0 6.0 47.0 D T491D476 (1)006A(2) 2.9 6.0 0.8 47.0 C T491C476 (1)006A(2) 2.9 6.0 1.6 #47.0 U T491U476 (1)006A(2) 2.9 6.0 1.8 #47.0 B T491B476 (1)006A(2) 2.9 6.0 2.0 †47.0 A T491A476M006A(2) 3.0 12.0 3.5 *47.0 T T491T476 (1)006A(2) 3.0 24.0 4.4 68.0 D T491D686 (1)006A(2) 4.1 6.0 0.8 #68.0 C T491C686 (1)006A(2) 4.1 6.0 1.2 #68.0 U T491U686 (1)006A(2) 4.1 10.0 1.8 #68.0 B T491B686 (1)006A(2) 4.1 8.0 0.9 #68.0 A T491A686(1)006A(2) 5.0 30.0 4.0 100.0 D T491D107 (1)006A(2) 6.0 8.0 0.8 100.0 V T491V107 (1)006A(2) 6.0 8.0 0.7 #100.0 C T491C107 (1)006A(2) 6.0 8.0 0.9 #100.0 U T491U107 (1)006A(2) 6.0 10.0 1.8 #100.0 B T491B107 (1)006A(2) 6.3 15.0 3.0 150.0 D T491D157 (1)006A(2) 9.0 8.0 0.7 #150.0 C T491C157 (1)006A(2) 9.0 8.0 1.2 #150.0 V T491V157 (1)006A(2) 9.0 8.0 0.7 220.0 X T491X227(1)006A(2) 13.2 8.0 0.7 #220.0 D T491D227 (1)006A(2) 13.2 8.0 0.7 #220.0 C T491C227M006A (2) 13.2 10.0 1.2 #220.0 V T491V227 (1)006A(2) 13.2 12.0 0.7 330.0 X T491X337(1)006A(2) 19.8 8.0 0.4 330.0 D T491D337 (1)006A(2) 19.8 8.0 0.4 330.0 E T491E337 (1)006A(2) 20.8 8.0 0.5 470.0 X T491X477(1)006A(2) 28.2 10.0 0.4 470.0 D T491D477M006A (2) 28.2 12.0 0.4 470.0 E T491E477 (1)006A(2) 29.6 10.0 0.4 680.0 E T491E687M006A (2) 40.8 12.0 0.5 1.5 A T491A155(1)010A(2) 0.5 6.0 8.0 2.2 B T491B225 (1)010A(2) 0.5 6.0 3.5 2.2 A T491A225(1)010A(2) 0.5 6.0 8.0 3.3 A T491A335(1)010A(2) 0.5 6.0 6.0 3.3 S T491S335 (1)010A(2) 0.5 6.0 15.0 #3.3 R T491R335 (1)010A(2) 0.3 8.0 15.0 4.7 B T491B475 (1)010A(2) 0.5 6.0 3.5 4.7 A T491A475(1)010A(2) 0.5 6.0 5.0 #4.7 S T491S475 (1)010A(2) 0.5 6.0 15.0 #4.7 R T491R475 (1)010A(2) 0.5 8.0 10.0 6.8 B T491B685 (1)010A(2) 0.7 6.0 3.5 6.8 A T491A685(1)010A(2) 0.7 6.0 4.0 6.8 T T491T685 (1)010A(2) 0.7 6.0 5.0 #6.8 S T491S685 (1)010A(2) 0.7 10.0 15.0 10.0 C T491C106 (1)010A(2) 1.0 6.0 1.8 10.0 B T491B106 (1)010A(2) 1.0 6.0 3.5 #10.0 A T491A106(1)010A(2) 1.0 6.0 4.0 #10.0 T T491T106 (1)010A(2) 1.0 6.0 5.0 #10.0 S T491S106 (1)010A(2) 1.0 10.0 15.0 15.0 C T491C156 (1)010A(2) 1.5 6.0 1.8 15.0 U T491U156 (1)010A(2) 1.5 6.0 1.8 15.0 B T491B156 (1)010A(2) 1.5 6.0 2.8 #15.0 A T491A156(1)010A(2) 1.5 8.0 6.0 #15.0 T T491T156 (1)010A(2) 1.5 8.0 5.0

10 Volt Rating at +85ºC (7 Volt Rating at +125ºC)

**6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630018 T491 RATINGS & PART NUMBER REFERENCE SOLID TANTALUM CHIP CAPACITORS T491 SERIES—Precision Molded Chip (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert T, H, G, or S lead material designation as shown on page 15. *Extended Values **6 Volt product equivalent to 6.3 volt product. #Maximum Capacitance Change @ 125ºC=+15%. †Maximum Capacitance Change @ 125ºC=+20%. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. Capaci- tance μF Case Size KEMET Part Number DC Leakage Capaci- tance μF Case Size KEMET Part Number DC Leakage @ +25°C 100 kHz Max 100.0

16 Volt Rating at +85ºC (10 Volt Rating at +125ºC)

µF Case Size KEMET Part Number DC Leakage μA @ 25ºC Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25°C 100 kHz Max 22.0 C T491C226 (1)010A(2) 2.2 6.0 1.8 22.0 U T491U226 (1)010A(2) 2.2 6.0 1.8 #22.0 B T491B226 (1)010A(2) 2.2 6.0 2.4 #22.0 A T491A226M010A(2) 2.2 10.0 6.0 #22.0 T T491T226 (1)010A(2) 2.2 12.0 8.0 33.0 D T491D336 (1)010A(2) 3.3 6.0 0.8 33.0 V T491V336 (1)010A(2) 3.3 6.0 0.7 33.0 C T491C336 (1)010A(2) 3.3 6.0 1.6 #33.0 U T491U336 (1)010A(2) 3.3 6.0 1.8 #33.0 B T491B336 (1)010A(2) 3.3 6.0 1.8 47.0 D T491D476 (1)010A(2) 4.7 6.0 0.8 47.0 V T491V476 (1)010A(2) 4.7 6.0 0.7 #47.0 C T491C476 (1)010A(2) 4.7 6.0 1.2 #47.0 U T491U476 (1)010A(2) 4.7 10.0 2.2 #47.0 B T491B476 (1)010A(2) 4.7 8.0 1.0 68.0 D T491D686 (1)010A(2) 6.8 6.0 0.8 68.0 V T491V686 (1)010A(2) 6.8 6.0 0.7 #68.0 C T491C686 (1)010A(2) 6.8 6.0 1.2 #68.0 U T491U686 (1)010A(2) 6.8 10.0 1.8 #68.0 B T491B686M010A (2) 6.8 10.0 3.0 100.0 D T491D107 (1)010A(2) 10.0 8.0 0.7 #100.0 C T491C107 (1)010A(2) 10.0 8.0 1.2 #100.0 V T491V107 (1)010A(2) 10.0 8.0 0.7 150.0 X T491X157(1)010A(2) 15.0 8.0 0.7 #150.0 D T491D157 (1)010A(2) 15.0 8.0 0.7 #150.0 C T491C157 (1)010A(2) 15.0 10.0 0.9 #150.0 V T491V157 (1)010A(2) 15.0 8.0 0.7 #220.0 X T491X227(1)010A(2) 22.0 8.0 0.5 #220.0 D T491D227 (1)010A(2) 22.0 8.0 0.5 #220.0 V T491V227 (1)010A(2) 22.0 12.0 0.7 #330.0 D T491D337M010A (2) 33.0 10.0 0.5 #330.0 X T491X337(1)010A(2) 33.0 10.0 0.5 #330.0 E T491E337 (1)010A(2) 33.0 10.0 0.5 #470.0 X T491X477(1)010A(2) 47.0 10.0 0.2 #470.0 E T491E477M010A(2) 47.0 12.0 0.5 1.0 A T491A105(1)016A(2) 0.5 4.0 10.0 1.5 A T491A155(1)016A(2) 0.5 6.0 8.0 2.2 A T491A225(1)016A(2) 0.5 6.0 6.0 2.2 S T491S225 (1)016A(2) 0.5 6.0 15.0 #2.2 R T491R225 (1)016A(2) 0.5 8.0 25.0 3.3 B T491B335 (1)016A(2) 0.5 6.0 3.5 3.3 A T491A335(1)016A(2) 0.5 6.0 5.0 4.7 C T491C475 (1)016A(2) 0.75 6.0 2.4 4.7 B T491B475 (1)016A(2) 0.8 6.0 3.5 4.7 A T491A475(1)016A(2) 0.8 6.0 4.0 4.7 T T491T475 (1)016A(2) 0.8 6.0 5.0 6.8 C T491C685 (1)016A(2) 1.1 6.0 1.9 6.8 B T491B685 (1)016A(2) 1.1 6.0 2.5 #6.8 A T491A685(1)016A(2) 1.1 6.0 3.5 10.0 C T491C106 (1)016A(2) 1.6 6.0 1.8 10.0 U T491U106 (1)016A(2) 1.6 6.0 1.8 10.0 B T491B106 (1)016A(2) 1.6 6.0 2.8 #10.0 A T491A106(1)016A(2) 1.6 8.0 7.0 #10.0 T T491T106 (1)016A(2) 1.6 8.0 8.0 15.0 C T491C156 (1)016A(2) 2.4 6.0 1.8 15.0 U T491U156 (1)016A(2) 2.4 6.0 1.8 15.0 B T491B156 (1)016A(2) 2.4 6.0 2.5 #15.0 A T491A156(1)016A(2) 2.4 8.0 3.5 22.0 D T491D226 (1)016A(2) 3.6 6.0 0.8 22.0 C T491C226 (1)016A(2) 3.6 6.0 1.6 #22.0 U T491U226 (1)016A(2) 3.6 10.0 3.0 #22.0 B T491B226 (1)016A(2) 3.6 6.0 2.2 33.0 D T491D336 (1)016A(2) 5.3 6.0 0.8 #33.0 C T491C336 (1)016A(2) 5.3 6.0 1.2 #33.0 U T491U336 (1)016A(2) 5.3 12.0 3.0 47.0 D T491D476 (1)016A(2) 7.5 6.0 0.8 47.0 V T491V476 (1)016A(2) 7.5 6.0 0.7 #47.0 C T491C476 (1)016A(2) 7.5 6.0 1.2 68.0 V T491V686 (1)016A(2) 10.9 6.0 0.7 68.0 D T491D686 (1)016A(2) 10.9 6.0 0.7 µF Case Size KEMET Part Number DC Leakage μA @ 25ºC Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25°C 100 kHz Max 100.0 X T491X107(1)016A(2) 16.0 8.0 0.7 †100.0 V T491V107 (1)016A(2) 16.0 12.0 0.7 #100.0 D T491D107 (1)016A(2) 16.0 8.0 0.7 #150.0 X T491X157(1)016A(2) 24.0 8.0 0.5 #150.0 D T491D157 (1)016A(2) 24.0 12.0 0.7 #220.0 X T491X227(1)016A(2) 35.2 10.0 0.5 #220.0 E T491E227 (1)016A(2) 35.2 7.2 0.9 0.47 R T491R474 (1)020A(2) 0.1 4.0 35.0 0.68 A T491A684(1)020A(2) 0.5 4.0 12.0 1.0 A T491A105(1)020A(2) 0.5 4.0 9.0 1.0 S T491S105 (1)020A(2) 0.5 6.0 18.0 #1.0 R T491R105 (1)020A(2) 0.5 6.0 20.0 1.5 A T491A155(1)020A(2) 0.5 6.0 6.5 1.5 S T491S155 (1)020A(2) 0.5 6.0 15.0 2.2 B T491B225 (1)020A(2) 0.5 6.0 3.5 2.2 A T491A225(1)020A(2) 0.5 6.0 7.0 3.3 B T491B335 (1)020A(2) 0.7 6.0 3.0 #3.3 A T491A335(1)020A(2) 0.7 6.0 4.5 3.3 T T491T335 (1)020A(2) 0.7 6.0 5.0 4.7 C T491C475 (1)020A(2) 1.0 6.0 2.4 4.7 B T491B475 (1)020A(2) 1.0 6.0 3.0 #4.7 A T491A475(1)020A(2) 1.0 6.0 4.0 6.8 C T491C685 (1)020A(2) 1.4 6.0 1.9 6.8 U T491U685 (1)020A(2) 1.4 6.0 1.9 #6.8 B T491B685 (1)020A(2) 1.4 6.0 2.5 #6.8 A T491A685M020A(2) 1.4 8.0 6.0 10.0 C T491C106 (1)020A(2) 2.0 6.0 1.8 10.0 U T491U106 (1)020A(2) 2.0 6.0 1.8 #10.0 B T491B106 (1)020A(2) 2.0 6.0 2.1 15.0 D T491D156 (1)020A(2) 3.0 6.0 1.0 15.0 C T491C156 (1)020A(2) 3.0 6.0 1.7 22.0 D T491D226 (1)020A(2) 4.4 6.0 0.8 22.0 V T491V226 (1)020A(2) 4.4 6.0 0.7 #22.0 C T491C226 (1)020A(2) 4.4 6.0 1.2 33.0 D T491D336 (1)020A(2) 6.6 6.0 0.8 #33.0 C T491C336M020A (2) 6.6 6.0 1.2 †33.0 V T491V336 (1)020A(2) 6.6 8.0 0.7 47.0 C T491C476M020A (2) 9.4 10.0 0.9 47.0 D T491D476 (1)020A(2) 9.4 6.0 0.7 68.0 X T491X686(1)020A(2) 13.6 6.0 0.7 #68.0 D T491D686 (1)020A(2) 13.6 8.0 0.7 #100.0 X T491X107(1)020A(2) 20.0 8.0 0.5 #100.0 E T491E107 (1)020A(2) 20.0 8.0 0.5 #150.0 X T491X157(1)020A(2) 30.0 10.0 0.5 0.33 A T491A334(1)025A(2) 0.5 4.0 15.0 0.47 A T491A474(1)025A(2) 0.5 4.0 14.0 0.68 A T491A684(1)025A(2) 0.5 4.0 10.0 1.0 B T491B105 (1)025A(2) 0.5 4.0 5.0 1.0 A T491A105(1)025A(2) 0.5 4.0 8.0 1.5 B T491B155 (1)025A(2) 0.5 6.0 5.0 1.5 A T491A155(1)025A(2) 0.5 6.0 7.5 2.2 C T491C225 (1)025A(2) 0.6 6.0 3.5 2.2 B T491B225 (1)025A(2) 0.6 6.0 4.5 3.3 C T491C335 (1)025A(2) 0.9 6.0 2.5 3.3 B T491B335 (1)025A(2) 0.9 6.0 3.5 4.7 C T491C475 (1)025A(2) 1.2 6.0 2.4 #4.7 B T491B475 (1)025A(2) 1.2 6.0 1.5 #4.7 A T491A475M025A(2) 1.2 8.0 6.0 6.8 C T491C685 (1)025A(2) 1.7 6.0 1.9 6.8 B T491B685 (1)025A(2) 1.7 8.0 2.8 10.0 D T491D106 (1)025A(2) 2.5 6.0 1.0 10.0 C T491C106 (1)025A(2) 2.5 6.0 1.5 15.0 D T491D156 (1)025A(2) 3.8 6.0 1.0 #15.0 C T491C156 (1)025A(2) 3.8 6.0 1.5 22.0 D T491D226 (1)025A(2) 5.5 6.0 0.8 22.0 C T491C226 (1)025A(2) 5.5 6.0 1.4 22.0 V T491V226 (1)025A(2) 5.5 6.0 0.7 33.0 X T491X336(1)025A(2) 8.3 6.0 0.7 #33.0 D T491D336 (1)025A(2) 8.3 6.0 0.7 #33.0 C T491C336M025A (2) 8.3 10.0 1.2 #47.0 X T491X476(1)025A(2) 11.8 6.0 0.7 †47.0 D T491D476 (1)025A(2) 11.8 10.0 0.7 †68.0 X T491X686M025A(2) 17.0 8.0 0.7 †68.0 D T491D686M025A (2) 17.0 10.0 0.7 100.0 X T491X107M025A(2) 25.0 8.0 0.3

20 Volt Rating at +85ºC (13 Volt Rating at + 125ºC)

25 Volt Rating at +85ºC (17 Volt Rating at +125ºC)

T491 Series — All Case Sizes Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "542" = The 42nd week of 2005 Polarity Indicator (+) Picofarad Code KEMET I. D. Symbol Rated Voltage 226 20 K 542 Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Molded Case Silver Adhesive Washer Positive Termination* Weld Polarity Stripe (+) Polarity Bevel (+) *100% tin ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 T491 RATINGS & PART NUMBER REFERENCE SOLID TANTALUM CHIP CAPACITORS T491 SERIES—Precision Molded Chip Solid Tantalum Surface Mount (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert T, H, G, or S lead material designation as shown on page 15. *Extended Values **6 Volt product equivalent to 6.3 volt product. #Maximum Capacitance Change @ 125ºC=+15%. †Maximum Capacitance Change @ 125ºC=+20%. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. A 155 V5 49 Polarity Indicator (+) Voltage KEMET MnO2 Picofarad Code K Date Code Lot Code A Case Size Voltage Code G 4 J 6.3 A 10 C 16 D 20 E 25 V 35 T 50 A Case Size 156 10V V5 49 Polarity Indicator (+) Voltage KEMET MnO2 Picofarad Code K Date Code Lot Code B Case Size 107 Polarity Indicator (+) Lot Code KEMET MnO2 Picofarad Code K Voltage Date Code C,D,X Case Size V5 49 Date Code - Year Date Code - Month S = 2004 V = 2007 1 = January 4 = April 7 = July 10 = October T = 2005 W = 2008 2 = February 5 = May 8 = August 11 = November U = 2006 X = 2009 3 = March 6 = June 9 = September 12 = December CAPACITOR ALTERNATE MARKINGS Capaci- tance µF Case Size KEMET Part Number DC Leakage μA @ 25ºC Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25°C 100 kHz Max 0.10 A T491A104(1)035A(2) 0.5 4.0 20.0 0.15 A T491A154(1)035A(2) 0.5 4.0 19.0 0.22 A T491A224(1)035A(2) 0.5 4.0 18.0 0.33 A T491A334(1)035A(2) 0.5 4.0 15.0 0.47 B T491B474 (1)035A(2) 0.5 4.0 8.0 0.47 A T491A474(1)035A(2) 0.5 4.0 12.0 0.68 B T491B684 (1)035A(2) 0.5 4.0 6.5 0.68 A T491A684(1)035A(2) 0.5 4.0 8.0 1.0 B T491B105 (1)035A(2) 0.5 4.0 5.0 1.0 A T491A105(1)035A(2) 0.5 4.0 7.5 1.5 C T491C155 (1)035A(2) 0.5 6.0 4.5 1.5 B T491B155 (1)035A(2) 0.5 6.0 5.0 2.2 C T491C225 (1)035A(2) 0.8 6.0 3.5 2.2 B T491B225 (1)035A(2) 0.8 6.0 4.0 3.3 C T491C335 (1)035A(2) 1.2 6.0 2.5 #3.3 B T491B335 (1)035A(2) 1.2 6.0 3.5 4.7 D T491D475 (1)035A(2) 1.7 6.0 1.5 4.7 C T491C475 (1)035A(2) 1.7 6.0 2.2 4.7 B T491B475 (1)035A(2) 1.6 6.0 3.1 6.8 D T491D685 (1)035A(2) 2.4 6.0 1.3 6.8 C T491C685 (1)035A(2) 2.4 6.0 1.8 10.0 D T491D106 (1)035A(2) 3.5 6.0 1.0 #10.0 C T491C106M035A (2) 3.5 6.0 1.6 #10.0 V T491V106 (1)035A(2) 3.5 6.0 2.0 15.0 X T491X156(1)035A(2) 5.3 6.0 0.9 15.0 D T491D156 (1)035A(2) 5.3 6.0 0.8 22.0 X T491X226(1)035A(2) 7.7 6.0 0.7 #22.0 D T491D226 (1)035A(2) 7.7 6.0 0.7 #33.0 X T491X336(1)035A(2) 11.6 6.0 0.6 †47.0 X T491X476(1)035A(2) 16.5 8.0 0.6 #47.0 E T491E476 (1)035A(2) 16.5 10.0 0.5 0.10 A T491A104(1)050A(2) 0.5 4.0 20.0 0.15 B T491B154 (1)050A(2) 0.5 4.0 16.0 0.15 A T491A154(1)050A(2) 0.5 4.0 15.0 0.22 B T491B224 (1)050A(2) 0.5 4.0 14.0 0.33 B T491B334 (1)050A(2) 0.5 4.0 10.0 0.47 C T491C474 (1)050A(2) 0.5 4.0 8.0 0.47 B T491B474 (1)050A(2) 0.5 4.0 9.0 0.68 C T491C684 (1)050A(2) 0.5 4.0 7.0 0.68 B T491B684 (1)050A(2) 0.5 4.0 8.0 1.0 C T491C105 (1)050A(2) 0.5 4.0 5.5 1.0 V T491V105 (1)050A(2) 0.5 4.0 6.0 1.5 D T491D155 (1)050A(2) 0.8 6.0 3.5 1.5 C T491C155 (1)050A(2) 0.8 6.0 4.5 2.2 D T491D225 (1)050A(2) 1.1 6.0 2.5 2.2 C T491C225 (1)050A(2) 1.1 6.0 3.0 3.3 D T491D335 (1)050A(2) 1.7 6.0 2.0 4.7 D T491D475 (1)050A(2) 2.4 6.0 1.4 6.8 X T491X685(1)050A(2) 3.5 6.0 1.0 #6.8 D T491D685 (1)050A(2) 3.4 6.0 1.0 #10.0 X T491X106M050A(2) 5.0 6.0 0.7 #10.0 D T491D106 (1)050A(2) 5.0 6.0 0.8 †15.0 X T491X156(1)050A(2) 7.5 8.0 0.7

35 Volt Rating at +85ºC (23 Volt Rating at +125ºC)

50 Volt Rating at +85ºC (33 Volt Rating at + 125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630020

• Established reliability military version of Industrial Grade T491 series
• Taped and reeled per EIA 481-1
• Precision-molded, laser-marked case
• Symmetrical, compliant terminations
• 100% Surge Current test available for all case sizes
• Operating Temperature: -55˚C to + 125˚C
• Qualified to MIL-PRF-55365/8, Style CWR11: – Term ination Options B, C, H, K –W e ibull failure rate codes B, C and D – Capac itance values and voltages as shown in following part number table. (Contact KEMET for latest qualification status) DIMENSIONS – Millimeters (Inches) T492 SERIES ORDERING INFORMATION — KEMET Part Number ORDERING INFORMATION — MIL-PRF-55365 Part Number # Note on Failure Rates: Exponential failure rate levels M, P, R and S are inactive for new design per Mil-C-55365. Parts qualified to Weibull failure rate levels are substitutable for exponential failure rate levels. /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72/MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 T492 OUTLINE DRAWINGS * Part Number Example: T492B105K035BS (14 digits - no spaces) * See www.kemet.com for Pb Free transition. Surge Current Option 4250 = +25°C after Weibull 4251 = -55° +85°C after Weibull 4252 = -55, & +85°C before Weibull Lead Material B = Gold C = Hot Solder Dip H or S = Solder Plated K = Solder Fused Capacitance Tolerances M = ±10%; K = ±10%; J = ±5% Failure Rate Symbol S (0.001%/1000 hrs.) # Exponential not recommended for new design Tantalum Series T492 - Precision Molded, Style CWR11 Case Size A, B, C, D Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. T 492 B 105 K 035 B S 4250 Voltage As shown Surge Current Option A = +25°C after Weibull B = -55°C +85°C after Weibull C = -55°, & +85°C before Weibull Z = None Capacitance Tolerances Failure Rate Symbol Weibull: B (0.1%/1000 hrs.) #Exponential: M (1.0%/1000 hrs.) P (0.1%/1000 hrs.) Style Capacitors, Chip, Fixed Tantalum Established Reliability, (encapsulated) Voltage D = 6V J = 20V F = 10V K = 25V H = 15V M = 35V Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. CWR11 M H 105 K B A Termination Finish Code B = Gold Plated C = Hot Solder Dipped H = Solder Plated K = Solder Fused # Inactive for New Design Case Size Component KEMET EIA L* W* H* K* ± 0.20 ± (.008) F* ± 0.1 ± (.004) S* ± 0.3 ± (.012) B ± 0.15 (Ref) ± .006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.9 (.035) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) B 3528-21 3.5 ± 0.2 (.138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.2 (.075 ± .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) C 6032-28 6.0 ± 0.3 .236 ± .012 3.2 ± 0.3 (.126 ± .012) 2.5 ± 0.3 (.098 ± .012) 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) D 7343-31 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 (.110 ± .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) Notes: 1. Metric dimensions govern 2. (Ref) Dimensions provided for reference only * Mil-PRF-55365/8 Specified Dimensions SOLID TANTALUM CHIP CAPACITORS T492 SERIES – Style CWR11 Per Mil-PRF-55365/8

Indicator (+) Picofarad Code KEMET I. D. Symbol Rated Voltage 156 20 K 513 J Jan Brand Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "513" = The 13th week of 2005 DC DF ESR Capaci- Leakage % @ +25 /H11034C /H9024 @ +25/H11034C tance Case KEMET M il-C-55365/8 /H9262A @ +25/H11034C 120 Hz 100kHz /H9262FS ize Part Number Part Number Max Max Max SOLID TANTALUM CHIP CAPACITORS T492 SERIES—Style CWR11 Per Mil-PRF-55365/8 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONSTRUCTION CAPACITOR MARKINGS T492 Series — All Case Sizes Note on Failure Rates: Exponential failure rate levels M, P, R and S are inactive for new design per MIL-C-55365. Parts qualified to Weibull failure rate levels are substitutable for exponential failure rate levels. Note: ESR limits are per Mil-C-55365/8 T492 (CWR11) RATINGS AND PART NUMBER REFERENCE Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Molded Case Silver Adhesive Washer Positive Termination Weld Polarity Stripe (+) Polarity Bevel (+) Solid Tantalum Surface Mount Sn/Pb (5% Pb minimum) Capaci- tance μF Case Size KEMET Part Number Mil-C-55365/8 Part Number DCL μA @ +25°C Max DF % @ +25°C 120 Hz Max ESR :Capaci- tance μF Case Size KEMET Part Number Mil-C-55365/8 Part Number DCL μA @ +25°C Max DF % @ +25°C 120 Hz Max ESR : @ +25°C 100kHz Max (1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10% or J for ±5% tolerance. (3) To complete KEMET part number, insert Termination Finish Designation B = Gold; C = Hot Solder Dipped; S = Solder Plated; K = Solder Fused. (4) To complete KEMET part number, insert 4250 = +25°C after Weibull; 4251 = -55° + 85°C after Weibull; or 4252 = -55, & +85°C before Weibull Surge Current Option. (5) To complete CWR part number, insert A = +25°C after Weibull; B = -55° + 85°C after Weibull; C = -55°, & + 85°C before Weibull or Z = None for Surge Current Option. (6) To complete CWR part numbers, insert B = Gold; C = Hot Solder Dipped; H or S = Solder Plated; K = Solder Fused

35 Volt Rating at +85°C (23 Volt Rating at +125°C)

10 Volt Rating at +85°C (7 Volt Rating at 125°C)

6 Volt Rating at +85°C (4 Volt Rating at +125°C)

15 Volt Rating at +85°C (10 Volt Rating at +125°C)

20 Volt Rating at +85°C (13 Volt Rating at +125°C)

25 Volt Rating at +85°C (17 Volt Rating at +125°C)

Note: T492 Packaging

• No c-spec required for 7” reel packaging
• C-7280 required for 13” reel packaging
• Standard reel packaging is not mandatory
• Bulk packaging also available using C-7610 See page 91 for tape and reel quantities.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630022

• Standard Cases Sizes A - X per EIA535BAAC
• Termination Finishes offered per MIL-PRF-55365: Gold Plated, Hot Solder Dipped, Solder Plated, Solder Fused, 100% Tin
• Weibull Grading Available: B (0.1%/1000hrs) and C (0.01%/1000hrs)
• Surge Current Testing Available per MIL-PRF-55365: 10 cycles @ +25°C; 10 cycles @ -55°C and +85°C
• Standard and Low ESR Options
• Operating Temperature Range: -55°C to +125°C
• Capacitance: 0.1 to 330µF
• Voltage: 4 to 50 Volts Case Size ±0.20 ±0.1 ±0.3 B ±0.15 KEMET EIA/IECQ L W H K ±(.008) F ±(.004) S ±(.012) (Ref) ±.006 X(Ref) T(Ref) A(Min) G(ref) E(ref) Dimensions - Millimeters (Inches) Outline Drawing /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76/MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110/MT32/MT78/MT111/MT116/MT99/MT104 /MT32/MT97/MT116/MT32/MT75/MT69/MT77/MT69/MT84/MT146/MT115/MT32/MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT69/MT105/MT116/MT104/MT101/MT114/MT32/MT69/MT110/MT100

Notes: 1. Metric dimensions govern. 2. (ref) - Dimensions provided for reference only. (.051) 1.4 (.055) 1.3 (.004 ± .004) 2.1 0.9 (.083) (.122) 0.10 ± 0.10 3.1 3.5 3.5 DIMENSIONS- MILLIMETERS (INCHES) Component Marking /MT43 /MT40/MT43/MT41/MT32/MT75/MT69/MT77/MT69/MT84 /MT84/MT52/MT57/MT51/MT32/MT67/MT79/MT84/MT83 /MT51/MT51/MT54 /MT82/MT97/MT116/MT101/MT100 /MT86/MT111/MT108/MT116/MT97/MT103/MT101 /MT75/MT69/MT77/MT69/MT84/MT32/MT73/MT68 /MT80/MT105/MT99/MT111/MT102/MT97/MT114/MT97/MT100/MT32/MT67/MT111/MT100/MT101 /MT80/MT111/MT108/MT97/MT114/MT105/MT116/MT121 /MT73/MT110/MT100/MT105/MT99/MT97/MT116/MT111/MT114/MT32 /MT75/MT50/MT48 /MT51/MT49/MT53/MT80/MT114/MT105/MT110/MT116/MT32/MT87/MT101/MT101/MT107/MT32/MT67/MT111/MT100/MT101 /MT49/MT115/MT116/MT32/MT68/MT105/MT103/MT105/MT116/MT32/MT61/MT32/MT89/MT101/MT97/MT114 /MT50/MT110/MT100/MT32/MT38/MT32/MT51/MT114/MT100/MT32/MT68/MT105/MT103/MT105/MT116/MT32/MT43/MT32/MT87/MT101/MT101/MT107 /MT147/MT51/MT49/MT53/MT148/MT32/MT61/MT32/MT49/MT53/MT116/MT104/MT32/MT87/MT101/MT101/MT107/MT32/MT111/MT102/MT32/MT50/MT48/MT48/MT51 COMPONENT MARKING SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS 515 “515 = 15th week of 2005 KEMET EIA A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.9 (.035) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.4 (.016) 0.4 (.016) 1.4 (.055) 1.1 (.043) 1.3 (.051) B 3528-21 3.5 ± 0.2 (.138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.1 (.075 ± .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.5 (.020) 1.0 (.039) 2.1 (.083) 1.8 (.071) 2.2 (.087) C 6032-28 6.0 ± 0.3 (.236 ± .012) 3.2 ± 0.3 (.126 ± .12) 2.5 ± 0.3 .098 ± .012) 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.0235) 1.0 (.039) 3.1 (.122) 2.8 (.110) 2.4 (.094) D 7343-31 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 (.110 ± .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.0235) 1.0 (.039) 3.8 (.150) 3.5 (.138) 3.5 (.138) X 7343-43 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.0 ± 0.3 (.157 ± .012) 2.3 (.091) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 1.7 (.067) 1.0 (.039) 3.8 (.150) 3.5 (.138) 3.5 (.138) E 7260-38 7.3 ± 0.3 (.287 ± .012) 6.0 ± 0.3 (.236± .012) 3.6 ± 0.2 (.142 ± .008) 2.3 (.091) 4.1 (.161) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 3.8 (.150) 3.5 (.138) 3.5 (.138) Case Size LW H A (Min) G (Ref) E (Ref)K ±0.20 F ±0.1 S ±0.3 X (Ref) B ±0.15 (Ref) ±(.006) P (Ref) R (Ref)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300* 23

ORDERING INFORMATION

T493 RATINGS AND PART NUMBER REFERENCE (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 µ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS Solid Tantalum Surface Mount Capaci- tance μF Case Size KEMET Part Number DCL μA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)

6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)

• Extended Values #Maximum Capacitance Change @ 125°C = +15% ESR/Surge Designator First 2 Numbers 61 = Surge - None 62 = Surge - 10 Cycles, +25°C 64 = Surge - 10 cycles, -55°C and +85°C Second 2 Numbers 10 = ESR - Standard 20 = ESR - Low 30 = ESR - Ultra-low Note: For order entry purposes the last 4-digits of the part number will be entered in the KEMET Customer Specification (C-Spec)Field. Termination Finish B - Gold plated C - Hot solder dipped H - Solder plated K - Solder fused T - 100% Tin Capacitance Tolerances M = ±10% K = ±10% J = ±5% (For 5% tolerance contact KEMET sales rep.) Reliability Level A = Non-ER; B = 0.1%/K hrs.; C = 0.01%/K hrs. Tantalum Series T493 Military Commercial Off-The-Shelf Case Size A, B, C, D, X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. T 493 D 227 K 006 C H 6120 Voltage As shown Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630024 T493 RATINGS AND PART NUMBER REFERENCE SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) cont.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 25 SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE Solid Tantalum Surface Mount (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% † Maximum Capacitance Change @ 125°C = +20%

20 Volt Rating at +85ºC (13 Volt Rating at +125ºC)

µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) cont.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630026 SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max

50 Volt Rating at +85ºC (33 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Notes: 1. Metric dimensions govern. 3. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. CASE SIZE COMPONENT KEMET R S T U V EIA 2012-12 3216-12 3528-12 6032-15 7343-20 L 2.0 0.2 (.079 ± .008) 3.2 ± 0.2 3.5 ± 0.2 (.138 ± .008) 7.3 ± 0.3 (.287 ± .012) W (.051 ± 1.6 ± 0.2 2.8 ± 0.2 (.110 ± .008) 4.3 ± 0.3 (.169 ± .012) HM ax. 1.2 (.047) 1.2 (.047) 1.2 (.047) 1.5 (.059) 2.0 (.079) 0.3 (.012) 0.3 (.012) 0.3 (.012) 0.5 (.020) 0.9 (.035) K Min. 0.9 (.035) 1.2 (.047) 2.2 (.087) 2.2 (.087) 2.4 (.094) F ± 0.1 0.5 (.020) 0.8 (.031) 0.8 (.031) 1.3 (.051) 1.3 (.051) S ± 0.3 0.05 (.002) 0.05 (.002) 0.05 (.002) 0.05 (.002) 0.05 (.002) X (Ref T (Ref) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) A (Min) 0.8 (.031) 1.4 (.055) 2.1 (.083) 3.1 (.122) 3.8 (.150) G (Ref) 0.5 (.020) 1.1 (.043) 1.8 (.071) 2.8 (.110) 3.5 (.138) E (Ref) 0.8 (.031) 1.3 (.051) 2.2 (.087) 2.4 (.094) 3.5 (.138) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) KEMET EIA L* W* H* X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A B C D X E 3216-18 3528-21 6032-28 7343-31 7343-43 7260-38 3.2 ± 0.2 (.126 ± .008) 3.5 ± 0.2 (.138 ± .008) 6.0 ± 0.3 (.236 ± .012) 7.3 ± 0.3 (.287 ± .012) 7.3 ± 0.3 (.287 ± .012) 7.3 ± 0.3 (.287 ± .012) 1.6 ±0.2 (.063 ±.008) 2.8 ± 0.2 (.1 10 ± .008) 3.2 ± 0.3 (.126 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.3 ± 0.3 (.169 ± .012) 6.0 ± 0.3 (.236 ± .012) 1.6 ± 0.2 (.063 ± .008) 1.9 ± 0.2 (.075 ± .008) 2.5 ± 0.3 (.098 ± .012) 2.8 ± 0.3 (.110 ± .012) 4.0 ± 0.3 (.157 ± .012) 3.6 ± 0.2 (.142 ± .008) 1.2 (.047) 2.2 (.087) 2.2 (.087) 2.4 (.094) 2.4 (.094) 4.1 (.161) 0.8 (.031) 0.8 (.031) 1.3 (.051) 1.3 (.051) 1.3 (.051) 1.3 (.051) 0.4 (.016) 0.4 (.016) 0.5 (.020) 0.5 (.020) 0.5 (.020) 0.5 (.020) 0.9 (.035) 1.1 (.043) 1.4 (.055) 1.5 (.059) 2.3 (.091) 2.3 (.091) 0.4 (.016) 0.5 (.020) 0.9 (.035) 0.9 (.035) 1.7 (.067) 0.9 (.035) 0.4 (.016) 1.0 (.039) 1.0 (.039) 1.0 (.039) 1.0 (.039) 1.0 (.039) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 0.13 (.005) 1.4 (.055) 2.1 (.083) 3.1 (.122) 3.8 (.150) 3.8 (.150) 3.8 (.150) 1.1 (.043) 1.8 (.071) 2.8 (.110) 3.5 (.138) 3.5 (.138) 3.5 (.138) 1.3 (.051) 2.2 (.087) 2.4 (.094) 3.5 (.138) 3.5 (.138) 3.5 (.138) CASE SIZE COMPONENT Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. * Mil-C-55365/8 Specified Dimensions K* ± 0.20 ± (.008) S* ± 0.3 ± (.012)F* ± 0.1 ± (.004) B (Ref) ± 0.15 ± (.006) Solid Tantalum Surface Mount SOLID TANTALUM CHIP CAPACITORS T494 SERIES — Low ESR, Industrial Grade CAPACITOR OUTLINE DRAWING

• Low ESR values in EIA 535BAAC sizes
• Taped and Reeled per EIA 481-1
• Symmetrical, Compliant Terminations
• Optional Gold-plated Terminations
• Laser-marked Case
• 100% Surge Current test on C, D, E, U, V, X sizes
• Capacitance: 0.1 /H9262F to 1000 /H9262F
• Tolerance: ±10%, ±20%
• Voltage: 3-50 VDC
• Extended Range Values
• Low Profile Case Sizes
• RoHS Compliant & Leadfree Terminations (See www.kemet.com for lead transition)
• Operating Temperature: -55˚C to +125˚C STANDARD T494 DIMENSIONS Millimeters (inches) /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 M105494 A 035TB S * T antalum Series T494 - Low ESR, Industrial Grade Case Size A, B, C, D, E, R, S, T, U, V, X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Lead Material Failure Rate Capacitance T olerance A - Not Applicable M - ± 20% K - ± 10% H - Tin/Lead G - Gold Plated (A, B, C, D, X only) **S T - 100% Tin (Sn) Plated Voltage - Not recommended for new designs (SnPb 5% Pb minimum) T494 ORDERING INFORMATION LOW PROFILE T494 DIMENSIONS Millimeters (inches) *Part number example: T494B105M035AT (14 digits - no spaces). See www.kemet.com for Pb Free transition. ** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix termination codes do not quarantee Pb-free product. *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS T494 SERIES—Low ESR, Industrial Grade T494 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert S, H, G, or T lead material designation as shown on page 27. *Extended Values **6 Volt product equivalent to 6.3 volt product. #Maximum Capacitance Change @ 125ºC=+15%. †Maximum Capacitance Change @ 125ºC=+20%. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. Capaci- tance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25ºC 100 kHz Max 100.0 T T494T107 (1)2R5A(2) 2.5 24.0 3.5 220.0 D T494D227 (1)2R5A(2) 5.5 8.0 0.2 #33.0 A T494A336 (1)003A(2) 1.0 6.0 2.0 3.3 A T494A335 (1)004A(2) 0.5 6.0 4.0 4.7 A T494A475 (1)004A(2) 0.5 6.0 3.5 6.8 A T494A685 (1)004A(2) 0.5 6.0 3.0 6.8 S T494S685 (1)004A(2) 0.5 6.0 7.0 10.0 B T494B106 (1)004A(2) 0.5 6.0 1.2 10.0 A T494A106 (1)004A(2) 0.5 6.0 2.0 #10.0 S T494S106 (1)004A(2) 0.5 6.0 9.0 #10.0 R T494R106M004A (2) 0.5 8.0 6.0 15.0 B T494B156 (1)004A(2) 0.6 6.0 1.2 15.0 A T494A156 (1)004A(2) 0.6 6.0 1.5 15.0 T T494T156 (1)004A(2) 0.6 6.0 2.0 #15.0 S T494S156M004A (2) 0.6 10.0 9.0 22.0 C T494C226 (1)004A(2) 0.9 6.0 0.5 22.0 B T494B226 (1)004A(2) 0.9 6.0 0.6 #22.0 A T494A226 (1)004A(2) 0.9 6.0 1.5 #22.0 S T494S226M004A (2) 0.9 10.0 8.0 #22.0 T T494T226 (1)004A(2) 0.9 6.0 2.5 33.0 C T494C336 (1)004A(2) 1.3 6.0 0.5 33.0 U T494U336 (1)004A(2) 1.3 6.0 0.6 33.0 B T494B336 (1)004A(2) 1.3 6.0 0.5 #33.0 A T494A336 (1)004A(2) 1.3 6.0 3.0 #33.0 T T494T336M004A (2) 1.3 8.0 3.5 47.0 C T494C476 (1)004A(2) 1.9 6.0 0.5 47.0 U T494U476 (1)004A(2) 1.9 6.0 0.6 #47.0 B T494B476 (1)004A(2) 1.9 6.0 0.5 #47.0 A T494A476M004A (2) 1.9 12.0 2.0 #47.0 T T494T476M004A (2) 1.9 12.0 4.0 68.0 D T494D686 (1)004A(2) 2.7 6.0 0.20 68.0 C T494C686 (1)004A(2) 2.7 6.0 0.25 #68.0 U T494U686 (1)004A(2) 2.7 6.0 0.60 #68.0 B T494B686 (1)004A(2) 2.7 6.0 2.00 #68.0 A T494A686 (1)004A(2) 2.8 30.0 3.00 100.0 D T494D107 (1)004A(2) 4.0 8.0 0.20 #100.0 C T494C107 (1)004A(2) 4.0 8.0 0.20 #100.0 U T494U107 (1)004A(2) 4.0 10.0 1.00 #100.0 B T494B107M004A (2) 4.0 8.0 0.65 †100.0 A T494A107M004A (2) 4.0 30.0 3.00 †100.0 T T494T107M004A (2) 4.0 30.0 4.50 150.0 D T494D157 (1)004A(2) 6.0 8.0 0.15 150.0 V T494V157 (1)004A(2) 6.0 8.0 0.20 #150.0 C T494C157 (1)004A(2) 6.0 8.0 0.30 †150.0 B T494B157M004A (2) 6.0 12.0 1.00 #220.0 V T494V227 (1)004A(2) 8.8 8.0 0.30 #220.0 B T494B227M004A (2) 8.8 8.0 0.40 #330.0 D T494D337 (1)004A(2) 13.2 8.0 0.15 #330.0 C T494C337 (1)004A(2) 13.2 10.0 0.09 †330.0 V T494V337 (1)004A(2) 13.2 12.0 0.30 #470.0 X T494X477(1)004A(2) 18.8 8.0 0.15 #470.0 D T494D477 (1)004A(2) 18.8 8.0 0.15 #680.0 X T494X687M004A(2) 27.2 12.0 0.10 #680.0 D T494D687M004A (2) 27.2 12.0 0.15 #1000.0 X T494X108(1)004A(2) 40.0 12.0 0.10 #1000.0 E T494E108M004A (2) 40.0 15.0 0.08 2.2 R T494R225 (1)006A(2) 0.5 6.0 20.0 2.2 A T494A225 (1)006A(2) 0.5 6.0 6.0 3.3 A T494A335 (1)006A(2) 0.5 6.0 6.0 4.7 A T494A475 (1)006A(2) 0.5 6.0 3.5 4.7 S T494S475 (1)006A(2) 0.5 6.0 8.0 6.8 B T494B685 (1)006A(2) 0.5 6.0 1.2 6.8 A T494A685 (1)006A(2) 0.5 6.0 2.0 #6.8 S T494S685 (1)006A(2) 0.5 6.0 9.0 #6.8 R T494R685 (1)006A(2) 0.5 8.0 10.0 10.0 B T494B106 (1)006A(2) 0.6 6.0 1.0 10.0 A T494A106 (1)006A(2) 0.6 6.0 2.0 10.0 T T494T106 (1)006A(2) 0.6 6.0 1.2 #10.0 S T494S106M006A (2) 0.6 10.0 9.0 #10.0 R T494R106M006A (2) 0.6 8.0 6.0 2.5 Volt Rating at +85ºC (1.7 Volt Rating at +125ºC) 4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC) **6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) Capaci- tance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25ºC 100 kHz Max 15.0 C T494C156 (1)006A(2) 0.9 6.0 0.6 15.0 B T494B156 (1)006A(2) 0.9 6.0 0.7 #15.0 A T494A156 (1)006A(2) 0.9 6.0 2.0 #15.0 T T494T156 (1)006A(2) 0.9 6.0 2.5 #15.0 S T494S156M006A (2) 0.9 10.0 10.0 22.0 C T494C226 (1)006A(2) 1.4 6.0 0.5 22.0 U T494U226 (1)006A(2) 1.4 6.0 0.8 22.0 B T494B226 (1)006A(2) 1.4 6.0 0.6 #22.0 A T494A226 (1)006A(2) 1.4 6.0 3.0 #22.0 T T494T226M006A (2) 1.4 8.0 3.5 33.0 C T494C336 (1)006A(2) 2.0 6.0 0.3 33.0 U T494U336 (1)006A(2) 2.0 6.0 0.6 #33.0 B T494B336 (1)006A(2) 2.0 6.0 0.6 #33.0 A T494A336 (1)006A(2) 2.0 12.0 2.0 #33.0 T T494T336M006A (2) 2.0 12.0 4.0 47.0 D T494D476 (1)006A(2) 2.9 6.0 0.22 47.0 C T494C476 (1)006A(2) 2.9 6.0 0.25 #47.0 U T494U476 (1)006A(2) 2.9 6.0 0.60 #47.0 B T494B476 (1)006A(2) 2.9 6.0 0.50 †47.0 A T494A476M006A (2) 3.0 12.0 2.50 47.0 T T494T476 (1)006A(2) 3.0 24.0 4.00 68.0 D T494D686 (1)006A(2) 4.1 6.0 0.20 #68.0 C T494C686 (1)006A(2) 4.1 6.0 0.20 #68.0 U T494U686 (1)006A(2) 4.1 10.0 1.00 #68.0 B T494B686M006A (2) 4.1 8.0 0.65 #68.0 A T494A686 (1)006A(2) 5.0 30.0 3.00 100.0 D T494D107 (1)006A(2) 6.0 8.0 0.15 100.0 V T494V107 (1)006A(2) 6.0 8.0 0.20 #100.0 C T494C107 (1)006A(2) 6.0 8.0 0.30 #100.0 U T494U107M006A (2) 6.0 10.0 1.20 #100.0 B T494B107 (1)006A(2) 6.0 15.0 1.50 150.0 D T494D157 (1)006A(2) 9.0 8.0 0.15 #150.0 C T494C157M006A (2) 9.0 8.0 0.30 #150.0 V T494V157 (1)006A(2) 9.0 8.0 0.30 220.0 X T494X227(1)006A(2) 13.2 8.0 0.15 #220.0 D T494D227 (1)006A(2) 13.2 8.0 0.15 #220.0 C T494C227M006A (2) 13.2 10.0 0.30 #220.0 V T494V227M006A (2) 13.2 12.0 0.30 #330.0 X T494X337(1)006A(2) 19.8 8.0 0.15 #330.0 D T494D337 (1)006A(2) 19.8 8.0 0.15 #330.0 E T494E337 (1)006A(2) 20.8 8.0 0.25 #470.0 X T494X477(1)006A(2) 28.2 10.0 0.10 #470.0 D T494D477M006A (2) 28.2 12.0 0.15 #470.0 E T494E477 (1)006A(2) 29.6 10.0 0.20 #680.0 E T494E687M006A (2) 40.8 12.0 0.10 1.5 A T494A155 (1)010A(2) 0.5 6.0 6.0 2.2 B T494B225 (1)010A(2) 0.5 6.0 1.5 2.2 A T494A225 (1)010A(2) 0.5 6.0 6.0 3.3 A T494A335 (1)010A(2) 0.5 6.0 4.0 3.3 S T494S335 (1)010A(2) 0.5 6.0 9.0 #3.3 R T494R335 (1)010A(2) 0.3 8.0 10.0 4.7 B T494B475 (1)010A(2) 0.5 6.0 1.5 4.7 A T494A475 (1)010A(2) 0.5 6.0 3.0 #4.7 S T494S475 (1)010A(2) 0.5 6.0 9.0 #4.7 R T494R475M010A (2) 0.5 8.0 8.0 6.8 B T494B685 (1)010A(2) 0.7 6.0 1.2 6.8 A T494A685 (1)010A(2) 0.7 6.0 3.0 6.8 T T494T685 (1)010A(2) 0.7 6.0 2.0 #6.8 S T494S685M010A (2) 0.7 10.0 9.0 10.0 C T494C106 (1)010A(2) 1.0 6.0 0.6 10.0 B T494B106 (1)010A(2) 1.0 6.0 0.8 #10.0 A T494A106 (1)010A(2) 1.0 6.0 1.8 #10.0 T T494T106 (1)010A(2) 1.0 6.0 3.5 #10.0 S T494S106M010A (2) 1.0 10.0 12.0 15.0 C T494C156 (1)010A(2) 1.5 6.0 0.5 15.0 U T494U156 (1)010A(2) 1.5 6.0 0.8 15.0 B T494B156 (1)010A(2) 1.5 6.0 0.7 #15.0 A T494A156 (1)010A(2) 1.5 8.0 4.0 #15.0 T T494T156M010A (2) 1.5 8.0 3.5 **6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 29 SOLID TANTALUM CHIP CAPACITORS T494 SERIES—Low ESR, Industrial Grade T494 RATINGS & PART NUMBER REFERENCE Solid Tantalum Surface Mount (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert S, H, G, or T lead material designation as shown on page 27. *Extended Values **6 Volt product equivalent to 6.3 volt product. #Maximum Capacitance Change @ 125ºC=+15%. †Maximum Capacitance Change @ 125ºC=+20%. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. (2) 47.0 12.0 0.10 1.0 A T494A105 (1)016A(2) 0.5 4.0 6.0 1.5 A T494A155 (1)016A(2) 0.5 6.0 6.0 2.2 A T494A225 (1)016A(2) 0.5 6.0 4.0 2.2 *S T494S225 (1)016A(2) 0.5 6.0 10.0 #2.2 *R T494R225 (1)016A(2) 0.5 8.0 20.0 3.3 B T494B335 (1)016A(2) 0.5 6.0 2.0 3.3 A T494A335 (1)016A(2) 0.5 6.0 4.0 4.7 B T494B475 (1)016A(2) 0.8 6.0 1.5 4.7 A T494A475 (1)016A(2) 0.8 6.0 3.0 4.7 T T494T475 (1)016A(2) 0.8 6.0 3.0 6.8 C T494C685 (1)016A(2) 1.1 6.0 0.8 6.8 B T494B685 (1)016A(2) 1.1 6.0 1.2 10.0 C T494C106 (1)016A(2) 1.6 6.0 0.6 10.0 U T494U106 (1)016A(2) 1.6 6.0 1.0 10.0 B T494B106 (1)016A(2) 1.6 6.0 0.8 #10.0 *A T494A106 (1)016A(2) 1.6 8.0 3.0 #10.0 *T T494T106 (1)016A(2) 1.6 8.0 6.0 15.0 C T494C156 (1)016A(2) 2.4 6.0 0.4 15.0 U T494U156 (1)016A(2) 2.4 6.0 0.8 #15.0 *B T494B156 (1)016A(2) 2.4 6.0 0.8 22.0 D T494D226 (1)016A(2) 3.6 6.0 0.25 22.0 C T494C226 (1)016A(2) 3.6 6.0 0.35 #22.0 *U T494U226 (1)016A(2) 3.6 10.0 1.80 #22.0 *B T494B226 (1)016A(2) 3.6 6.0 1.00 33.0 D T494D336 (1)016A(2) 5.3 6.0 0.25 #33.0 *C T494C336 (1)016A(2) 5.3 6.0 0.30 #33.0 *U T494U336 (1)016A(2) 5.3 12.0 2.20 47.0 D T494D476 (1)016A(2) 7.5 6.0 0.2 47.0 V T494V476 (1)016A(2) 7.5 6.0 0.3 #47.0 *C T494C476 (1)016A(2) 7.5 6.0 0.5 68.0 *D T494D686 (1)016A(2) 10.9 6.0 0.15 #68.0 *V T494V686 (1)016A(2) 33.0 D T494D336 (1)020A(2) 6.6 6.0 0.25 #33.0 *C T494C336M020A (2) 6.6 6.0 0.40 †33.0 V T494V336 (1)020A(2) 6.6 8.0 0.40 47.0 C T494C476M020A (2) 9.4 10.0 0.80 47.0 *D T494D476 (1)020A(2) 9.4 6.0 0.20 68.0 X T494X686(1)020A(2) 13.6 6.0 0.20 #68.0 *D T494D686 (1)020A(2) 13.6 8.0 0.20 #100.0 *X T494X107 (1)020A(2) 20.0 8.0 0.15 #100.0 *E T494E107 (1)020A(2) 20.0 8.0 0.30 #150.0 *X T494X157 (1)020A(2) 30.0 10.0 0.30 0.33 A T494A334 (1)025A(2) 0.5 4.0 10.0 0.47 A T494A474 (1)025A(2) 0.5 4.0 9.0 0.68 A T494A684 (1)025A(2) 0.5 4.0 6.0 1.0 B T494B105 (1)025A(2) 0.5 4.0 2.0 1.0 *A T494A105 (1)025A(2) 0.5 4.0 4.0 1.5 B T494B155 (1)025A(2) 0.5 6.0 1.5 1.5 *A T494A155 (1)025A(2) 0.5 6.0 3.0 2.2 C T494C225 (1)025A(2) 0.6 6.0 2.2 2.2 B T494B225 (1)025A(2) 0.6 6.0 1.2 3.3 C T494C335 (1)025A(2) 0.9 6.0 1.2 3.3 *B T494B335 (1)025A(2) 0.9 6.0 2.0 4.7 C T494C475 (1)025A(2) 1.2 6.0 0.6 #4.7 *A T494A475M025A (2) 1.2 8.0 3.0 6.8 C T494C685 (1)025A(2) 1.7 6.0 0.6 6.8 *B T494B685 (1)025A(2) 1.7 8.0 2.0 10.0 D T494D106 (1)025A(2) 2.5 6.0 0.4 10.0 *C T494C106 (1)025A(2) 2.5 6.0 0.6 15.0 D T494D156 (1)025A(2) 3.8 6.0 0.35 #15.0 *C T494C156 (1)025A(2) 3.8 6.0 0.90 22.0 D T494D226 (1)025A(2) 5.5 6.0 0.3 22.0 *C T494C226 (1)025A(2) 5.5 6.0 1.0 22.0 *V T494V226 (1)025A(2) 5.5 6.0 0.5 33.0 X T494X336(1)025A(2) 8.3 6.0 0.3 #33.0 *D T494D336 (1)025A(2) 8.3 6.0 0.4 #33.0 *C T494C336 (1)025A(2) 8.3 10.0 1.0 #47.0 *X T494X476 (1)025A(2) 11.8 6.0 0.3 †47.0 *D T494D476 (1)025A(2) 11.8 10.0 0.2 †68.0 *X T494X686M025A (2) 17.0 8.0 0.3 †68.0 *D T494D686M025A (2) 17.0 10.0 0.5 †100.0 *X T494X107M025A (2) Capaci- tance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25ºC 100 kHz Max 22.0 C T494C226 (1)010A(2) 2.2 6.0 0.4 22.0 U T494U226 (1)010A(2) 2.2 6.0 0.8 #22.0 B T494B226 (1)010A(2) 2.2 6.0 0.7 #22.0 A T494A226M010A (2) 2.2 10.0 4.5 #22.0 T T494T226M010A (2) 2.2 12.0 6.0 33.0 D T494D336 (1)010A(2) 3.3 6.0 0.25 33.0 V T494V336 (1)010A(2) 3.3 6.0 0.30 33.0 C T494C336 (1)010A(2) 3.3 6.0 0.30 #33.0 U T494U336 (1)010A(2) 3.3 6.0 0.60 #33.0 B T494B336 (1)010A(2) 3.3 6.0 1.40 47.0 D T494D476 (1)010A(2) 4.7 6.0 0.22 47.0 V T494V476 (1)010A(2) 4.7 6.0 0.30 #47.0 C T494C476 (1)010A(2) 4.7 6.0 0.30 #47.0 U T494U476 (1)010A(2) 4.7 10.0 1.20 #47.0 B T494B476M010A (2) 4.7 8.0 0.65 68.0 D T494D686 (1)010A(2) 6.8 6.0 0.20 #68.0 C T494C686 (1)010A(2) 6.8 6.0 0.30 68.0 V T494V686 (1)010A(2) 6.8 6.0 0.30 #68.0 U T494U686M010A (2) 6.8 10.0 1.20 #68.0 B T494B686M010A (2) 6.8 10.0 1.50 100.0 D T494D107 (1)010A(2) 10.0 8.0 0.15 #100.0 C T494C107 (1)010A(2) 10.0 8.0 0.20 #100.0 V T494V107 (1)010A(2) 10.0 8.0 0.40 150.0 X T494X157(1)010A(2) 15.0 8.0 0.15 #150.0 D T494D157 (1)010A(2) 15.0 8.0 0.15 #150.0 C T494C157 (1)010A(2) 15.0 10.0 0.70 #150.0 V T494V157M010A (2) 15.0 8.0 0.30 #220.0 X T494X227(1)010A(2) 22.0 8.0 0.15 #220.0 D T494D227 (1)010A(2) 22.0 8.0 0.15 #220.0 V T494V227 (1)010A(2) 22.0 12.0 0.50 #330.0 X T494X337(1)010A(2) 33.0 10.0 0.10 #330.0 D T494D337M010A (2) 33.0 10.0 0.15 #330.0 E T494E337 (1)010A(2) 33.0 10.0 0.25 #470.0 X T494X477(1)010A(2) 47.0 10.0 0.10 #470.0 E T494E477M010A (2) 47.0 12.0 0.10 1.0 A T494A105 (1)016A(2) 0.5 4.0 6.0 1.5 A T494A155 (1)016A(2) 0.5 6.0 6.0 2.2 A T494A225 (1)016A(2) 0.5 6.0 4.0 2.2 S T494S225 (1)016A(2) 0.5 6.0 10.0 #2.2 R T494R225 (1)016A(2) 0.5 8.0 20.0 3.3 B T494B335 (1)016A(2) 0.5 6.0 2.0 3.3 A T494A335 (1)016A(2) 0.5 6.0 4.0 4.7 B T494B475 (1)016A(2) 0.8 6.0 1.5 4.7 A T494A475 (1)016A(2) 0.8 6.0 3.0 4.7 T T494T475 (1)016A(2) 0.8 6.0 3.0 6.8 C T494C685 (1)016A(2) 1.1 6.0 0.8 6.8 B T494B685 (1)016A(2) 1.1 6.0 1.2 #6.8 A T494A685 (1)016A(2) 1.1 6.0 3.0 10.0 C T494C106 (1)016A(2) 1.6 6.0 0.6 10.0 U T494U106 (1)016A(2) 1.6 6.0 1.0 10.0 B T494B106 (1)016A(2) 1.6 6.0 0.8 #10.0 A T494A106 (1)016A(2) 1.6 8.0 3.0 #10.0 T T494T106 (1)016A(2) 1.6 8.0 6.0 15.0 C T494C156 (1)016A(2) 2.4 6.0 0.4 15.0 U T494U156 (1)016A(2) 2.4 6.0 0.8 #15.0 B T494B156 (1)016A(2) 2.4 6.0 0.8 22.0 D T494D226 (1)016A(2) 3.6 6.0 0.25 22.0 C T494C226 (1)016A(2) 3.6 6.0 0.35 #22.0 U T494U226 (1)016A(2) 3.6 10.0 1.80 #22.0 B T494B226 (1)016A(2) 3.6 6.0 1.00 33.0 D T494D336 (1)016A(2) 5.3 6.0 0.25 #33.0 C T494C336 (1)016A(2) 5.3 6.0 0.30 #33.0 U T494U336 (1)016A(2) 5.3 12.0 2.20 47.0 D T494D476 (1)016A(2) 7.5 6.0 0.2 47.0 V T494V476 (1)016A(2) 7.5 6.0 0.3 #47.0 C T494C476 (1)016A(2) 7.5 6.0 0.5 68.0 D T494D686 (1)016A(2) 10.9 6.0 0.15 #68.0 V T494V686 (1)016A(2) 10.9 6.0 0.5

16 Volt Rating at +85ºC (10 Volt Rating at + 125ºC)

µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25ºC 100 kHz Max 100.0 X T494X107(1)016A(2) 16.0 8.0 0.15 #100.0 D T494D107 (1)016A(2) 16.0 8.0 0.15 †100.0 V T494V107 (1)016A(2) 16.0 12.0 0.5 #150.0 X T494X157(1)016A(2) 24.0 8.0 0.15 #150.0 D T494D157 (1)016A(2) 24.0 12.0 0.4 #220.0 X T494X227(1)016A(2) 35.2 10.0 0.4 #220.0 E T494E227 (1)016A(2) 35.2 7.2 0.5 0.68 A T494A684 (1)020A(2) 0.5 4.0 8.0 1.0 A T494A105 (1)020A(2) 0.5 4.0 5.5 1.0 S T494S105 (1)020A(2) 0.5 6.0 10.0 †1.0 R T494R105 (1)020A(2) 0.2 6.0 15.0 1.5 A T494A155 (1)020AS(2) 0.5 6.0 4.5 1.5 S T494S155 (1)020A(2) 0.5 6.0 9.0 2.2 B T494B225 (1)020A(2) 0.5 6.0 1.5 2.2 A T494A225 (1)020A(2) 0.5 6.0 4.0 3.3 B T494B335 (1)020A(2) 0.7 6.0 1.3 #3.3 A T494A335 (1)020A(2) 0.7 6.0 4.0 3.3 T T494T335 (1)020A(2) 0.7 6.0 4.0 4.7 C T494C475 (1)020A(2) 1.0 6.0 0.6 4.7 B T494B475 (1)020A(2) 1.0 6.0 1.0 #4.7 A T494A475 (1)020A(2) 1.0 6.0 3.0 6.8 C T494C685 (1)020A(2) 1.4 6.0 0.6 6.8 U T494U685 (1)020A(2) 1.4 6.0 1.4 #6.8 B T494B685 (1)020A(2) 1.4 6.0 1.0 #6.8 A T494A685M020A (2) 1.4 8.0 3.0 10.0 C T494C106 (1)020A(2) 2.0 6.0 0.5 10.0 U T494U106 (1)020A(2) 2.0 6.0 0.8 #10.0 B T494B106 (1)020A(2) 2.0 6.0 1.0 15.0 D T494D156 (1)020A(2) 3.0 6.0 0.35 15.0 C T494C156 (1)020A(2) 3.0 6.0 0.40 22.0 D T494D226 (1)020A(2) 4.4 6.0 0.3 22.0 V T494V226 (1)020A(2) 4.4 6.0 0.4 #22.0 C T494C226 (1)020A(2) 4.4 6.0 0.4 33.0 D T494D336 (1)020A(2) 6.6 6.0 0.25 #33.0 C T494C336M020A (2) 6.6 6.0 0.40 †33.0 V T494V336 (1)020A(2) 6.6 8.0 0.40 47.0 C T494C476M020A (2) 9.4 10.0 0.80 47.0 D T494D476 (1)020A(2) 9.4 6.0 0.20 68.0 X T494X686(1)020A(2) 13.6 6.0 0.20 #68.0 D T494D686 (1)020A(2) 13.6 8.0 0.20 #100.0 X T494X107(1)020A(2) 20.0 8.0 0.15 #100.0 E T494E107 (1)020A(2) 20.0 8.0 0.30 #150.0 X T494X157(1)020A(2) 30.0 10.0 0.30 0.33 A T494A334 (1)025A(2) 0.5 4.0 10.0 0.47 A T494A474 (1)025A(2) 0.5 4.0 9.0 0.68 A T494A684 (1)025A(2) 0.5 4.0 6.0 1.0 B T494B105 (1)025A(2) 0.5 4.0 2.0 1.0 A T494A105 (1)025A(2) 0.5 4.0 4.0 1.5 B T494B155 (1)025A(2) 0.5 6.0 1.5 1.5 A T494A155 (1)025A(2) 0.5 6.0 3.0 2.2 C T494C225 (1)025A(2) 0.6 6.0 2.2 2.2 B T494B225 (1)025A(2) 0.6 6.0 1.2 3.3 C T494C335 (1)025A(2) 0.9 6.0 1.2 3.3 B T494B335 (1)025A(2) 0.9 6.0 2.0 4.7 C T494C475 (1)025A(2) 1.2 6.0 0.6 #4.7 B T494B475 (1)025A(2) 1.2 6.0 1.0 #4.7 A T494A475M025A (2) 1.2 8.0 3.0 6.8 C T494C685 (1)025A(2) 1.7 6.0 0.6 6.8 B T494B685 (1)025A(2) 1.7 8.0 2.0 10.0 D T494D106 (1)025A(2) 2.5 6.0 0.4 10.0 C T494C106 (1)025A(2) 2.5 6.0 0.6 15.0 D T494D156 (1)025A(2) 3.8 6.0 0.35 #15.0 C T494C156 (1)025A(2) 3.8 6.0 0.90 22.0 D T494D226 (1)025A(2) 5.5 6.0 0.3 22.0 C T494C226 (1)025A(2) 5.5 6.0 1.0 22.0 V T494V226 (1)025A(2) 5.5 6.0 0.5 33.0 X T494X336(1)025A(2) 8.3 6.0 0.3 #33.0 D T494D336 (1)025A(2) 8.3 6.0 0.4 #33.0 C T494C336 (1)025A(2) 8.3 10.0 1.0 #47.0 X T494X476(1)025A(2) 11.8 6.0 0.3 †47.0 D T494D476 (1)025A(2) 11.8 10.0 0.2 †68.0 X T494X686M025A(2) 17.0 8.0 0.3 †68.0 D T494D686M025A (2) 17.0 10.0 0.5 †100.0 X T494X107M025A(2) 25.0 8.0 0.25

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630030 Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "527" = The 27th week of 200 5 Polarity Indicator (+) (• Denotes T494) Picofarad Code KEMET I. D. Symbol Rated Voltage 107 10 K 527 CONSTRUCTION CAPACITOR MARKINGS T494 Series — All Case Sizes Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Molded Case Silver Adhesive Washer Positive Termination* Weld Polarity Stripe (+) Polarity Bevel (+) *100% tin SOLID TANTALUM CHIP CAPACITORS T494 SERIES—Low ESR, Industrial Grade T494 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert S, H, G, or T lead material designation as shown on page 27. *Extended Values **6 Volt product equivalent to 6.3 volt product. #Maximum Capacitance Change @ 125ºC=+15%. †Maximum Capacitance Change @ 125ºC=+20%. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. Capaci- tance μF Case Size KEMET Part Number DC Leakage μA @ 25°C Max DF % @ +25ºC 120 Hz Max ESR Capaci- tance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF % @ +25ºC 120 Hz Max ESR Ω @ +25ºC 100 kHz Max 0.10 A T494A104 (1)035A(2) 0.5 4.0 10.0 0.15 A T494A154 (1)035A(2) 0.5 4.0 6.0 0.22 A T494A224 (1)035A(2) 0.5 4.0 6.0 0.33 A T494A334 (1)035A(2) 0.5 4.0 6.0 0.47 B T494B474 (1)035A(2) 0.5 4.0 2.5 0.47 A T494A474 (1)035A(2) 0.5 4.0 4.0 0.68 B T494B684 (1)035A(2) 0.5 4.0 2.5 0.68 A T494A684 (1)035A(2) 0.5 4.0 6.0 1.0 B T494B105 (1)035A(2) 0.5 4.0 2.0 1.0 A T494A105 (1)035A(2) 0.5 4.0 6.0 1.5 C T494C155 (1)035A(2) 0.5 6.0 2.5 1.5 B T494B155 (1)035A(2) 0.5 6.0 3.0 2.2 C T494C225 (1)035A(2) 0.8 6.0 1.5 2.2 B T494B225 (1)035A(2) 0.8 6.0 2.5 3.3 C T494C335 (1)035A(2) 1.2 6.0 0.8 #3.3 B T494B335 (1)035A(2) 1.2 6.0 1.3 4.7 D T494D475 (1)035A(2) 1.7 6.0 0.7 4.7 C T494C475 (1)035A(2) 1.7 6.0 0.7 6.8 D T494D685 (1)035A(2) 2.4 6.0 0.5 6.8 C T494C685 (1)035A(2) 2.4 6.0 0.9 10.0 D T494D106 (1)035A(2) 3.5 6.0 0.4 #10.0 C T494C106M035A (2) 3.5 6.0 1.2 #10.0 *V T494V106 (1)035A(2) 3.5 6.0 0.8 15.0 X T494X156(1)035A(2) 5.3 6.0 0.30 15.0 D T494D156 (1)035A(2) 5.3 6.0 0.35 #22.0 X T494X226(1)035A(2) 7.7 6.0 0.3 #22.0 D T494D226 (1)035A(2) 7.7 6.0 0.4 #33.0 D T494D336 (1)035A(2) 11.6 6.0 0.6 #33.0 X T494X336(1)035A(2) 11.6 6.0 0.6 †47.0 X T494X476(1)035A(2) 16.5 8.0 0.5 †47.0 E T494E476(1)035A(2) 16.5 10.0 0.3 0.10 A T494A104 (1)050A(2) 0.5 4.0 10.0 0.15 B T494B154 (1)050A(2) 0.5 4.0 10.0 0.15 A T494A154 (1)050A(2) 0.5 4.0 10.0 0.22 B T494B224 (1)050A(2) 0.5 4.0 10.0 0.33 B T494B334 (1)050A(2) 0.5 4.0 2.5 0.47 C T494C474 (1)050A(2) 0.5 4.0 1.8 0.47 B T494B474 (1)050A(2) 0.5 4.0 2.0 0.68 C T494C684 (1)050A(2) 0.5 4.0 1.6 0.68 B T494B684 (1)050A(2) 0.5 4.0 3.0 1.0 C T494C105 (1)050A(2) 0.5 4.0 1.6 #1.0 V T494V105M050A (2) 0.5 4.0 4.0 1.5 D T494D155 (1)050A(2) 0.8 6.0 1.0 1.5 C T494C155 (1)050A(2) 0.8 6.0 1.5 2.2 D T494D225 (1)050A(2) 1.1 6.0 0.8 2.2 C T494C225 (1)050A(2) 1.1 6.0 1.5 3.3 D T494D335 (1)050A(2) 1.7 6.0 0.8 4.7 D T494D475 (1)050A(2) 2.4 6.0 0.6 6.8 X T494X685(1)050A(2) 3.5 6.0 0.5 #6.8 D T494D685 (1)050A(2) 3.4 6.0 0.7 #10.0 X T494X106M050A(2) 5.0 6.0 0.4 #10.0 D T494D106 (1)050A(2) 5.0 6.0 0.7 †15.0 X T494X156(1)050A(2) 7.5 6.0 0.4

SOLID TANTALUM CHIP CAPACITORS T495 SERIES—Low ESR, Surge Robust OUTLINE DRAWING /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80

• New Extended Values for Low ESR
• Low Equivalent Series Inductance (/H110212.5nH ESL)
• Precision-molded, laser-marked case
• Symmetrical, compliant terminations
• Taped and reeled per EIA 481-1
• RoHS Compliant & Leadfree Terminations (see www.kemet.com for lead transition) STANDARD T495 DIMENSIONS Millimeters (Inches) Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. 3. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. CASE SIZE COMPONENT KEMET T EIA 3528-12 L 3.5 ± 0.2 (.138 ± .008) W 2.8 ± 0.2 (.110 ± .008) H Max. 1.2 (.047) 0.3 (.012) K Min. 2.2 (.087) F ± 0.1 0.8 (.031) S ± 0.3 0.05 (.002) X (Ref T (Ref) 0.13 (.005) A (Min) 2.1 (.083) G (Ref) 1.8 (.071) E (Ref) 2.2 (.087) V 7343-20 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.0 (0.079) 0.9 (.035) 2.4 (.094) 1.3 (.051) 0.05 (.002) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) LOW PROFILE T495 DIMENSIONS Millimeters (Inches) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
• Designed for very low ESR
• High ripple current capability
• High surge current capability
• 100% accelerated steady-state aging
• 100% Surge Current test
• Meets or Exceeds EIA Standard 535BAAC
• Available tested per DSCC Dwg. 95158
• Operating Temperature: -55˚C to +125˚C Solid Tantalum Surface Mount Capacitance Tolerance M = ±20%, K = ±10% Series T495 - Low ESR, Surge Robust Lead Material T = 100% Tin (Sn) Plated H = G = S = Not Recommended for new design Case Size B, C, D, T, V, X Capacitance Picofarad Code First two digits represent significant figures . Third digit specifies number of zeros to follow. Tantalum T 495 X 107 M 010 A S E100 ESR E100 = ESR in Milliohmns = 100 mOhms E1K5 = ESR in Ohms = 1.5 Ohms 4095 = DSCC Dwg. 95158 Designator Failure Rate A = Not Applicable VoltageSee www.kemet.com for Pb Free transition information. T495 Series – ORDERING INFORMATION KEMET EIA B 3528-21 3.5 08) Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. Tin/Lead (SnPb 5% Pb minimum) KEMET EIA A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.9 (.035) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) B 3528-21 3.5 ± 0.2 (.138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.1 (.075 ± .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) C 6032-28 6.0 ± 0.3 (.236 ± .012) 3.2 ± 0.3 (.126 ± .12) 2.5 ± 0.3 .098 ± .012) 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.0235) 1.0 (.039) 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) D 7343-31 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 (.110 ± .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.0235) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) X 7343-43 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.0 ± 0.3 (.157 ± .012) 2.3 (.091) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) E 7260-38 7.3 ± 0.3 (.287 ± .012) 6.0 ± 0.3 (.236± .012) 3.6 ± 0.2 (.142 ± .008) 2.3 (.091) 4.1 (.161) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) T (Ref) Case Size LW H A (Min) G (Ref) E (Ref)K ±0.20 F ±0.1 S ±0.3 X (Ref) B ±0.15 (Ref) ±(.006) P (Ref) R (Ref) A,B,C,D,X,E,T,V H = Tin/Lead (SnPb % PB min) G = Gold Plated *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630032 SOLID TANTALUM CHIP CAPACITORS T495 SERIES—Low ESR, Surge Robust T495 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET part number, insert "K" for ±10% or "M" for ±20% capacitance tolerance. (2) To copmplete KEMET part number, insert lead material (designations per Ordering Information on page 31. * Extended Values High voltage ratings and tighter capacitance tolerance product may be substituted within (the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. (1) To complete KEMET part number, insert “K” for ±10% or “M” for ±20% capacitance tolerance. (2) To complete KEMET part number, insert lead material designations per Ordering Information on page 31. * Extended Values Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating., 25°C 85°C 125°C 100.0 T T495T107M2R5A(2)E3K0 2.5 24.0 3000 153 137 61 220.0 D T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 470.0 D T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 1000.0 X T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 1000.0 X T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 68.0 V T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 100.0 B T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 150.0 B T495B157M004A(2) E900 6.0 12.0 900 307 277 123 150.0 C T495C157(1)004A(2)E070 6.0 12.0 70 1254 1128 501 150.0 C T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 220.0 D T495D227(1)004A(2)E040 8.8 8.0 40 1936 1743 775 220.0 D T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 220.0 D T495D227(1)004A(2)E100 8.8 8.0 100 1225 1102 490 330.0 C T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 330.0 C T495C337(1)004A(2)E700 13.2 12.0 700 396 357 159 330.0 D T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 330.0 D T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 470.0 D T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 470.0 D T495D477(1)004A(2)E100 18.8 12.0 100 1225 1102 490 470.0 X T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 470.0 X T495X477(1)004A(2)E045 18.8 8.0 45 1915 1723 766 470.0 X T495X477(1)004A(2)E100 18.8 8.0 100 1285 1156 514 1000.0 X T495X108(1)004A(2)E030 40.0 12.0 30 2345 2111 938 1000.0 X T495X108(1)004A(2)E040 40.0 12.0 40 2031 1828 812 1000.0 X T495X108(1)004A(2)E060 40.0 12.0 60 1658 1492 663 1000.0 X T495X108(1)004A(2)E070 40.0 12.0 70 1535 1381 614 1000.0 E T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 1000.0 E T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 47.0 B T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 47.0 C T495C476(1)006A(2)E250 2.9 6.0 250 663 597 265 47.0 V T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 68.0 D T495D686(1)006A(2)E175 3.3 4.0 175 926 833 370 68.0 D T495D686(1)006A(2)4095 95158-01(1)(2) 3.3 4.0 175 926 833 370 100.0 B T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 100.0 B T495B107M006A(2)E700 6.3 15.0 700 348 313 139 100.0 C T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 100.0 C T495C107(1)006A(2)E150 6.0 8.0 150 856 770 342 100.0 D T495D107(1)006A(2)E050 6.0 6.0 50 1732 1559 693 100.0 D T495D107(1)006A(2)E130 6.0 6.0 130 1074 967 430 100.0 D T495D107(1)006A(2)E150 6.0 8.0 150 1000 900 400 100.0 V T495V107(1)006A(2)E090 6.0 8.0 90 1179 1061 471 100.0 V T495V107(1)006A(2)E150 6.0 8.0 150 913 822 365 150.0 C T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 150.0 C T495C157M006A(2)E200 9.0 8.0 200 742 668 297 150.0 V T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 150.0 V T495V157(1)006A(2)E070 9.0 8.0 70 1336 1203 535 150.0 D T495D157(1)006A(2)E050 9.0 6.0 50 1732 1559 693 150.0 D T495D157(1)006A(2)E125 9.0 6.0 125 1095 986 438 150.0 X T495X157(1)006A(2)E100 7.2 6.0 100 1285 1156 514 150.0 X T495X157(1)006A(2)4095 95158-02(1)(2) 7.2 6.0 125 1150 1040 460 220.0 C T495C227(1)006A(2)E225 13.9 10.0 225 700 600 300 220.0 D T495D227(1)006A(2)E045 13.2 8.0 45 1826 1643 730 220.0 D T495D227(1)006A(2)E100 13.9 8.0 100 1225 1102 490 220.0 D T495D227(1)006A(2)4095 95158-25(1)(2) 13.2 8.0 100 1225 1102 490 220.0 X T495X227(1)006A(2)E070 13.2 8.0 70 1535 1381 614 220.0 X T495X227(1)006A(2)E100 13.2 8.0 100 1285 1156 514 220.0 X T495X227(1)006A(2)4095 95158-03(1)(2) 13.2 8.0 100 1285 1156 514 330.0 D T495D337(1)006A(2)E040 20.8 8.0 40 1936 1743 775 330.0 D T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 330.0 D T495D337(1)006A(2)E070 20.8 8.0 70 1464 1317 586 330.0 D T495D337(1)006A(2)E100 20.8 8.0 100 1225 1102 490 330.0 X T495X337(1)006A(2)E065 19.8 8.0 65 1593 1434 637 330.0 X T495X337(1)006A(2)E045 19.8 8.0 45 1915 1723 766 330.0 X T495X337(1)006A(2)E100 19.8 8.0 100 1285 1723 766 330.0 E T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 330.0 E T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 470.0 D T495D477M006A(2)E045 29.6 12.0 45 1826 1643 730 470.0 D T495D477(1)006A(2)E100 29.6 12.0 100 1225 1102 490 470.0 D T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 470.0 X T495X477(1)006A(2)E030 28.2 10.0 30 2345 2111 938 470.0 X T495X477(1)006A(2)E045 28.2 10.0 45 1915 1723 766 470.0 X T495X477(1)006A(2)E050 28.2 10.0 50 1816 1634 726 470.0 X T495X477(1)006A(2)E065 28.2 10.0 65 1593 1434 637 470.0 E T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 470.0 E T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 470.0 E T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 1000.0 E T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 Ripple Current mA rms @ 25°C, 100 kHz Max 4 Volt Rating @ +85°C (2.7 Volt Rating at +125°C) 6/6.3 Volt Rating @ +85°C (4 Volt Rating at +125°C) Capaci- tance µF Case Size KEMET Part Number DSCC Dwg. No. 95158 Part Number DC Leakage µA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max 2.5 Volt Rating @ +85°C (1.7 Volt Rating at +125°C) 25°C 85°C 125°C 4.7 A T495A475(1)010A(2)E1K3 0.5 6.0 1300 240 216 96 4.7 B T495B475(1)010A(2)E1K3 0.5 15.0 1300 256 230 102 6.8 A T495A685(1)010A(2)E1K8 0.7 6.0 1800 204 184 82 6.8 B T495B685(1)010A(2)E900 0.7 6.0 900 307 277 123 6.8 A T495A106(1)010A(2)E1K8 1.0 6.0 1800 204 184 82 10.0 B T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 15.0 B T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 15.0 C T495C156(1)010A(2)E375 1.5 6.0 375 542 487 217 15.0 C T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 15.0 C T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 22.0 C T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 22.0 C T495C226(1)010A(2)E345 2.2 6.0 345 565 508 226 33.0 B T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 33.0 V T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 33.0 V T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 47.0 B T495B476(1)010A(2)E500 4.7 6.0 500 412 371 164 47.0 D T495D476(1)010A(2)E080 3.8 4.0 80 1369 1232 548 47.0 D T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 47.0 D T495D476(1)010A(2)E200 3.8 4.0 200 866 780 346 47.0 D T495D476(1)010A(2)4095 95158-04(1)(2) 3.8 4.0 200 866 780 346 68.0 B T495B686(1)010A(2)E600 6.8 10.0 600 376 339 151 68.0 B T495B686(1)010A(2)E750 1.5 10.0 750 337 303 135 68.0 B T495B686M010A(2)E900 6.8 10.0 900 307 276 123 68.0 C T495C686(1)010A(2)E070 6.8 6.0 80 1173 1055 469 68.0 C T495C686(1)010A(2)E225 6.8 6.0 225 700 630 280 68.0 V T495V686(1)010A(2)E070 6.8 6.0 70 1336 1203 535 68.0 V T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 68.0 V T495V686(1)010A(2)E140 6.8 6.0 140 945 850 378 68.0 D T495D686(1)010A(2)E070 6.8 6.0 70 1464 1317 586 68.0 D T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 68.0 D T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 68.0 X T495X686(1)010A(2)E150 5.4 4.0 150 1049 944 420 68.0 X T495X686(1)010A(2)4095 95158-05(1)(2) 5.4 4.0 150 1049 944 420 100.0 V T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 100.0 V T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 100.0 D T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 100.0 D T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 100.0 D T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 100.0 D T495D107(1)010A(2)E100 10.0 8.0 100 1220 1100 490 100.0 D T495D107(1)010A(2)4095 95158-06(1)(2) 10.0 8.0 100 1220 1100 490 100.0 X T495X107(1)010A(2)E100 8.0 6.0 100 1285 1156 514 100.0 X T495X107(1)010A(2)4095 95158-07(1)(2) 8.0 6.0 100 1285 1156 514 150.0 V T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 150.0 V T495V157M010A(2)E150 15.0 8.0 150 913 822 365 150.0 D T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 150.0 D T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 150.0 D T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 150.0 D T495D157(1)010A(2)E100 15.0 8.0 100 1225 1102 490 150.0 D T495D157(1)010A(2)4095 95158-26(1)(2) 15.0 8.0 100 1225 1102 490 150.0 X T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 150.0 X T495X157(1)010A(2)E080 15.0 8.0 80 1436 1293 574 150.0 X T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 150.0 X T495X157(1)010A(2)E100 15.0 8.0 100 1285 1156 514 150.0 X T495X157(1)010A(2)4095 95158-08(1)(2) 15.0 8.0 100 1285 1156 514 DC Leakage µA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max Ripple Current mA rms @ 25°C, 100 kHz Max

10 Volt Rating @ +85°C (7 Volt Rating at +125°C)

tance µF Case Size KEMET Part Number DSCC Dwg. No. 95158 Part Number

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 33 SOLID TANTALUM CHIP CAPACITORS T495 SERIES—Low ESR, Surge Robust T495 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET part number, insert "K" for ±10% or "M" for ±20% capacitance tolerance. (2) To copmplete KEMET part number, insert lead material (designations per Ordering Information on page 31. * Extended Values High voltage ratings and tighter capacitance tolerance product may be substituted within (the same size at KEMET's option 0 D (1) To complete KEMET part number, insert “K” for ±10% or “M” for ±20% capacitance tolerance. (2) To complete KEMET part number, insert lead material designations per Ordering Information on page 31. * Extended Values Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating., A 157 V5 49 Polarity Indicator (+) Voltage KEMET MnO2 Picofarad Code K Date Code Lot Code A Case Size Voltage Code G 4 J 6.3 A 10 C 16 D 20 E 25 V 35 T 50 A Case Size 157 10V V5 49 Polarity Indicator (+) Voltage KEMET MnO2 Picofarad Code K Date Code Lot Code B Case Size 157 Polarity Indicator (+) Lot Code KEMET MnO2 Picofarad Code K Voltage Date Code C,D,X Case Size V5 49 Date Code - Year Date Code - Month S = 2004 V = 2007 1 = January 4 = April 7 = July 10 = October T = 2005 W = 2008 2 = February 5 = May 8 = August 11 = November U = 2006 X = 2009 3 = March 6 = June 9 = September 12 = December CAPACITOR ALTERNATE MARKINGS Solid Tantalum Surface Mount 25°C 85°C 125°C 220.0 V T495V227(1)010A(2)E150 22.0 12.0 150 913 822 365 220.0 D T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 220.0 D T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 220.0 D T495D227(1)010A(2)E100 22.0 8.0 100 1225 1102 490 220.0 D T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 220.0 X T495X227(1)010A(2)E045 22.0 8.0 45 1915 1723 766 220.0 X T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 220.0 X T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 220.0 X T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 220.0 X T495X227(1)010A(2)E100 22.0 8.0 100 1285 1156 514 220.0 X T495X227(1)010A(2)4095 95158-28(1)(2) 15.0 8.0 100 1285 1156 514 330.0 D T495D337(1)010A(2)E100 33.0 8.0 100 1227 1102 490 330.0 D T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 330.0 D T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 330.0 X T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 330.0 X T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 330.0 X T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 330.0 X T495X337(1)010A(2)E100 33.0 10.0 100 1284 1156 513 330.0 E T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 330.0 E T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 330.0 E T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 470.0 X T495X477M010A(2)E045 47.0 10.0 45 1915 1723 766 470.0 X T495X477M010A(2)E050 47.0 10.0 50 1817 1635 727 470.0 X T495X477M010A(2)E060 47.0 10.0 60 1658 1492 663 470.0 X T495X477M010A(2)E100 47.0 10.0 100 1284 1156 513 470.0 X T495X477M010A(2)E200 47.0 10.0 200 908 817 363 3.3 A T495A335(1)016A(2)E3K0 0.5 6.0 3000 158 142 63 4.7 A T495A475(1)016A(2)E2K0 0.8 6.0 2000 194 174 77 4.7 B T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 6.8 C T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 10.0 T T495T106M016A(2)E4K0 1.6 8.0 4000 132 119 53 15.0 A T495A156(1)016A(2)E2K5 2.4 8.0 2500 173 156 69 15.0 B T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 33.0 C T495C336(1)016A(2)E200 5.3 6.0 200 742 667 297 33.0 C T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 33.0 C T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 33.0 D T495D336(1)016A(2)E150 6.6 6.0 150 1000 900 400 33.0 D T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 33.0 D T495D336(1)016A(2)E225 4.2 4.0 225 816 735 327 33.0 D T495D336(1)016A(2)4095 95158-09(1)(2) 4.2 4.0 250 770 700 310 47.0 C T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 47.0 D T495D476(1)016A(2)E080 7.5 6.0 80 1369 1232 547 47.0 D T495D476(1)016A(2)E100 7.5 6.0 100 1225 1102 490 47.0 D T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 47.0 D T495D476(1)016A(2)4095 95158-10(1)(2) 7.5 6.0 200 870 780 345 68.0 V T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 68.0 V T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 68.0 D T495D686(1)016A(2)E070 10.9 6.0 70 1464 1317 586 68.0 D T495D686(1)016A(2)E100 10.9 6.0 100 1225 1102 490 68.0 D T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 100.0 D T495D107(1)016(2)E100 16.0 8.0 100 1225 1102 490 100.0 D T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 100.0 X T495X107(1)016A(2)E080 16.0 8.0 80 1436 1293 574 100.0 X T495X107(1)016A(2)E100 16.0 8.0 100 1285 1156 514 100.0 X T495X107(1)016A(2)4095 95158-11(1)(2) 16.0 8.0 125 1149 1034 460 150.0 D T495D157M016A(2)E100 24.0 8.0 100 1224 1102 489 150.0 D T495D157M016A(2)E125 24.0 8.0 125 1095 985 438 150.0 D T495D157M016A(2)E150 24.0 8.0 150 1000 900 400 150.0 X T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 150.0 X T495X157(1)016A(2)E100 24.0 8.0 100 1285 1156 514 220.0 X T495X227(1)016A(2)E100 35.2 8.0 100 1284 1156 513 220.0 E T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 220.0 E T495E227(1)016A(2)E075 35.2 8.0 75 1632 1469 652 220.0 E T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 220.0 E T495E227(1)016A(2)E150 35.2 7.2 150 1155 1039 462

16 Volt Rating @ +85°C (10 Volt Rating at +125°C)

rms @ 25°C, 100 kHz Max Capaci- tance µF Case Size KEMET Part Number DSCC Dwg. No. 95158 Part Number DC Leakage µA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max 10 Volt Rating @ +85°C (7 Volt Rating at +125°C) cont. 25°C 85°C 125°C 1.0 A T495A105(1)020A(2)E3K0 0.2 4.0 3000 158 142 63 10.0 B T495B106(1)020A(2)E1K0 2.0 6.0 1000 292 262 117 10.0 C T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 10.0 C T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 15.0 C T495C156(1)020A(2)E375 3.0 6.0 375 542 487 217 15.0 D T495D156(1)020A(2)E275 2.4 4.0 275 738 665 295 15.0 D T495D156(1)020A(2)4095 95158-12(1)(2) 2.4 4.0 275 738 665 295 22.0 D T495D226(1)020A(2)E180 3.5 4.0 180 913 822 365 22.0 D T495D226(1)020A(2)E225 3.5 4.0 225 816 735 326 22.0 D T495D226(1)020A(2)4095 95158-13(1)(2) 3.5 4.0 275 739 665 295 33.0 D T495D336(1)020A(2)E100 6.6 6.0 100 1225 1102 490 33.0 D T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 33.0 D T495D336(1)020A(2)E200 6.6 6.0 200 866 780 346 47.0 D T495D476(1)020A(2)E075 9.4 6.0 75 1414 1272 565 47.0 D T495D476(1)020A(2)E100 9.4 6.0 100 1225 1102 490 47.0 D T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 47.0 X T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 47.0 X T495X476(1)020A(2)E100 9.4 6.0 100 1285 1156 514 47.0 X T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 47.0 X T495X476(1)020A(2)E150 7.5 4.0 150 1049 944 420 47.0 X T495X476(1)020A(2)4095 95158-14(1)(2) 7.5 4.0 150 1049 944 420 68.0 D T495D686(1)020A(2)E070 13.6 8.0 70 1464 1317 586 68.0 D T495D686(1)020A(2)E150 13.6 8.0 150 1000 900 400 68.0 X T495X686(1)020A(2)E120 13.6 6.0 120 1173 1055 469 68.0 X T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 68.0 X T495X686(1)020A(2)4095 95158-15(1)(2) 13.6 6.0 150 1049 944 420 100.0 X T495X107(1)020A(2)E100 20.0 6.0 100 1285 1156 514 100.0 X T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 100.0 E T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 100.0 E T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 100.0 E T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 150.0 E T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 0.47 A T495A474(1)025A(2)E4K5 0.5 4.0 4500 129 116 52 2.2 C T495C225(1)025A(2)E1K3 0.6 6.0 1300 291 262 116 3.3 C T495C335(1)025A(2)E750 0.9 6.0 750 383 345 153 4.7 C T495C475(1)025A(2)E575 1.2 6.0 575 437 394 175 6.8 B T495B685(1)025A(2)E1K5 1.7 6.0 1500 238 214 95 6.8 C T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 6.8 C T495C685(1)025A(2)E490 1.7 6.0 490 474 426 190 6.8 C T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 10.0 C T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 10.0 C T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 10.0 C T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 15.0 D T495D156(1)025A(2)E275 3.8 6.0 275 738 665 295 15.0 D T495D156(1)025A(2)4095 95158-16(1)(2) 3.8 6.0 275 738 665 295 15.0 X T495X156(1)025A(2)E200 3.0 4.0 200 908 817 363 15.0 X T495X156(1)025A(2)4095 95158-17(1)(2) 3.0 4.0 200 908 817 363 22.0 C T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 22.0 C T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 22.0 *C T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 22.0 D T495D226(1)025A(2)E200 5.5 6.0 200 866 780 346 22.0 X T495X226(1)025A(2)E225 4.4 4.0 225 856 771 343 22.0 X T495X226(1)025A(2)4095 95158-18(1)(2) 4.4 4.0 225 856 771 343 33.0 D T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 33.0 D T495D336(1)025A(2)E100 8.3 6.0 100 1225 1102 490 33.0 D T495D336(1)025A(2)E225 8.3 6.0 225 816 735 327 33.0 D T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 33.0 X T495X336(1)025A(2)E100 8.3 4.0 100 1285 1156 514 33.0 X T495X336(1)025A(2)E175 6.6 4.0 175 971 874 388 33.0 X T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 33.0 X T495X336(1)025A(2)4095 95158-19(1)(2) 6.6 4.0 175 971 874 388 47.0 X T495X476M025A(2)E080 11.8 8.0 80 1436 1293 574 47.0 X T495X476M025A(2)E150 11.8 6.0 150 1049 944 420 47.0 X T495X476M025A(2)E185 16.5 8.0 185 944 850 378 47.0 X T495X476M025A(2)E200 11.8 6.0 200 908 817 363 47.0 D T495D476M025(2)E120 11.8 10.0 120 1118 1006 447 47.0 D T495D476(1)025(2)E250 11.8 10.0 250 775 697 310 DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max Ripple Current mA rms @ 25°C, 100 kHz Max Case Size KEMET Part Number DSCC Dwg. No. 95158 Part Number DC Leakage µA @ 25°C Max

20 Volt Rating @ +85°C (13 Volt Rating at +125°C)

25 Volt Rating @ +85°C (17 Volt Rating at +125°C)

tance µF

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630034 SOLID TANTALUM CHIP CAPACITORS T495 SERIES—Low ESR, Surge Robust T495 RATINGS & PART NUMBER REFERENCE CAPACITOR MARKINGS Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "527" = The 27th week of 200 5 Low ESR Device Polarity Indicator (+) (Solid Stripe) Picofarad Code KEMET I. D. Symbol Rated Voltage 107 10 K 527 CONSTRUCTION Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Molded Case Silver Adhesive Washer Positive Termination* Weld Polarity Stripe (+) Polarity Bevel (+) *100% tin (1) To complete KEMET part number, insert “K” for ±10% or “M” for ±20% capacitance tolerance. (2) To complete KEMET part number, insert lead material designations per Ordering Information on page 31. *Extended Values Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option.Voltage substitutions will be marked with the higher voltage rating. 25°C 85°C 125°C 68.0 X T495X686(1)025A(2)E125 17.0 8.0 125 1149 1034 460 68.0 X T495X686(1)025A(2)E150 17.0 8.0 150 1049 944 420 68.0 X T495X686(1)025A(2)E200 17.0 8.0 200 908 817 363 100.0 E T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 0.47 B T495B474(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 0.47 B T495B474(1)035A(2)E2K2 0.5 4.0 2200 197 177 79 1.0 A T495A105(1)035A(2)E3K0 0.4 4.0 3000 158 142 63 1.0 B T495B105(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1.0 B T495B105(1)035A(2)E1K7 0.5 4.0 1700 224 201 89 2.2 B T495B225(1)035A(2)E1K5 0.8 6.0 1500 238 214 95 2.2 C T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 3.3 B T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 3.3 C T495C335(1)035A(2)E525 1.1 6.0 525 457 411 182 3.3 C T495C335(1)035A(2)E550 1.1 6.0 550 447 402 178 3.3 C T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 4.7 B T495B475(1)035A(2)E1K0 1.6 6.0 1000 292 262 117 4.7 C T495C475(1)035A(2)E450 1.7 6.0 450 494 445 198 4.7 C T495C475(1)035A(2)E500 1.7 6.0 500 469 422 188 4.7 C T495C475(1)035A(2)E600 1.7 6.0 600 428 385 171 4.7 C T495C475(1)035A(2)4095 95158-29(1)(2) 1.7 6.0 600 428 385 171 6.8 D T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 6.8 D T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 6.8 X T495X685(1)035A(2)E300 1.9 4.0 300 742 667 297 6.8 X T495X685(1)035A(2)4095 95158-20(1)(2) 1.9 4.0 300 742 667 297 10.0 D T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 10.0 D T495D106(1)035A(2)E250 3.5 6.0 250 775 697 310 10.0 D T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 10.0 D T495D106(1)035A(2)4095 95158-27(1)(2) 3.5 4.0 300 707 636 283 10.0 X T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 10.0 X T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 10.0 X T495X106(1)035A(2)E250 2.8 4.0 250 812 731 325 10.0 X T495X106(1)035A(2)4095 95158-21(1)(2) 2.8 4.0 250 812 731 325 15.0 D T495D156(1)035A(2)E225 5.3 6.0 225 816 735 327 15.0 D T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 15.0 X T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 15.0 X T495X156(1)035A(2)E225 5.3 6.0 225 856 771 343 15.0 X T495X156(1)035A(2)4095 95158-22(1)(2) 5.3 6.0 225 856 771 343 22.0 D T495D226(1)035A(2)E125 7.7 6.0 125 1095 985 438 22.0 D T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 22.0 D T495D226(1)035A(2)E250 7.7 6.0 250 775 697 310 22.0 D T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 22.0 X T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 22.0 X T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 22.0 X T495X226(1)035A(2)E275 7.7 6.0 275 775 697 410 22.0 X T495X226(1)035A(2)4095 95158-23(1)(2) 7.7 6.0 300 742 667 297

33.0 X T495X336

(1)035A(2)E100 11.6 6.0 100 1285 1156 514 33.0 X T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 33.0 X T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 47.0 X T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 47.0 X T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 47.0 X T495X476(1)035A(2)E300 16.5 8.0 300 742 667 297 1.0 C T495C105(1)050A(2)E1K3 0.5 4.0 1300 291 262 116 2.2 D T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 3.3 D T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 4.7 D T495D475(1)050A(2)E275 2.4 6.0 275 739 665 295 4.7 D T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 4.7 X T495X475(1)050A(2)E300 1.9 4.0 300 742 667 297 4.7 X T495X475(1)050A(2)4095 95158-24(1)(2) 1.9 4.0 300 742 667 297 6.8 D T495D685(1)050A(2)E190 3.4 6.0 190 888 799 355 6.8 D T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 6.8 D T495D685(1)050A(2)E275 3.4 6.0 275 739 665 295 6.8 D T495D685(1)050A(2)E300 3.4 8.0 300 700 600 300 10.0 X T495X106(1)050A(2)E250 5.0 8.0 250 774 697 309 10.0 X T495X106(1)050A(2)E260 5.0 6.0 260 796 716 318 10.0 X T495X106(1)050A(2)E300 5.0 6.0 300 741 667 297 15.0 X T495X156(1)050A(2)E200 7.5 8.0 200 908 817 363 15.0 X T495X156(1)050A(2)E300 7.5 8.0 300 742 667 297

35 Volt Rating @ +85°C (23 Volt Rating at +125°C)

50 Volt Rating @ +85°C (33 Volt Rating at +125°C)

µA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max Ripple Current mA rms @ 25°C, 100 kHz Max Capaci- tance µF Case Size KEMET Part Number DSCC Dwg. No. 95158 Part Number

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 35 Solid Tantalum Surface Mount SOLID TANTALUM CHIP CAPACITORS T495 SERIES—Low ESR, Surge Robust Note that standard values are preferred, especially where high surge currents are possible. Extended values are available to increase capacitance and reduce ESR. Note that standard CV values demonstrate inherently lower failure rates than extended CV values, especially in low impedance applications. T495 TANTALUM CHIP CAPACITANCE VALUES Case Size and Max. ESR (m Ω Ω) by Capacitance & Voltage Standard Capacitance Values Note that standard values are preferred, especially where high surge currents are possible.Extended values are available to increase capacitance and reduce ESR. Note that standard CV values demonstrate inherently lower failure rates than extended CV values, especially in low impedance applications. D D,100,150,200 D,90,100 D,225,300 X,175 D,300 X,175,250 47.0 476 B,450 C,250 V,150 B, 500 D,80,90, 200 C,350 D,100,150, 200 D,75,100,17 X,65,100 X,125, µF Code 2.5 4 6 10 16 20 25 35 50 0.47 474 A,4500 B,1500 B,2200 1.0 105 A,3000 A,3000 B,1500 B,1700 C,1300 2.2 225 A,1800 C,1300 B,1500 C,750 D,600 3.3 335 A,3000 C,750 B,900 C,525,550,600 D,700 4.7 475 A,1300 B,1300 A,2000 B,700 C,575 B,1000 C,450,500 C,600 D,275,300 X,300 6.8 685 A,1800 B,900 C,750 B,1500 C,400,490,50 D,400 X,300 D,190,200,27 D,300 10.0 106 A,1800 B,750 A,1700 T,4000 B,1000 C,400,475 B,750 C,450 D,120,125,250D ,300 X,175,200 X,250 X,250,300 15.0 156 B,500 C,375,400, 475 A,2500 B,800 C,375 D,275 D,275 X,200 C,350 D,225,300 X,200,225 X,300 22.0 226 A,900 B,500 C,290,345 B,600 D,180,225 D,275 C, 300,900 D,200 X,225 D,125,200,250 D300 X,125,200,275, 300 33.0 336 B,450 V,100,150 C,200,225, 275 D,150,175, D,225,250 D,100,150 200 D,90,100 D,225,300 X,100,175 D,300 X,100,175,250 47.0 476 B,450 C,250 V,150 B, 500 D,80,90, 200 C,350 D,100,150, 200 D,75,100,175 X,65,100 X,125,150 D,120,250 X,80,150,185, 200 X,185,200, 300 68.0 686 V,150 D,175 V,70,100,140 B,600,750 B,900 C,80,225 D,90,150 X,150 V,180,300 D,150 D,70,150 X,120,150 X,125,150 200 100.0 107 T, 3000 B,500 V,90,150 B,400,700 C,75,150 D,150 C,100 V,100,150 D,50,65, 80,100 X,100 D,100,125 X,80,100, 125 X,150 E,85,100 200 E,100 150.0 157 B,900 C.70,250 V,40,70 C,50,200 X,100,125 C,200 D,50,60,80,100 X,70,80,85,100 V,100,150 D,100,125,15 X,75,100 E,80 220.0 227 D,45 C,225 D,45,100 X,70,100 V,150 D,45,75 D,100,125 X, 45,50,60, 70,100 X,100 E,50,100,150 330.0 337 C,300,700 D,30,45 X,45,65, X,100 D,40,50,70, D,100 E,40,60,100 D,100,125 X,35,50,60 E,40,60,100 470.0 477 D,35 D,45,100 X,30,45,100 X,30,45,50, X,65 D,45,100,125 E,40,55,100 X,45,50 680.0 687 1000.0 108 X,30,40 X,30,40,60,70 E,35,50 E,50 Capacitance Rated Voltage @ +85°C

/MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 /MT84/MT101/MT115/MT116/MT32/MT84/MT97/MT98 /MT48/MT46/MT49/MT53/MT40/MT48/MT46/MT48/MT48/MT54/MT41/MT32/MT77/MT97/MT120/MT46 OUTLINE DRAWINGS Part Number Example: T496B105M025AS (14 digits no spa es) M105496 A 025TB S T antalum Series T496 - P recision Molded, Fail-safe Case Size B, C, D, X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Lead Material Failure Rate V oltage Capacitance T olerance A - Not Applicable M - ± 20% K - ± 10% H - Tin/Lead (SnPb - 5% Pb minimum) **S T - 100% Sn (Tin) Plated - Not recommended for new designs T496 Series – ORDERING INFORMATION Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. KEMET EIA H X (Ref) P (Ref) R T (Ref) A (Min) G (Ref) E (Ref) CASE SIZE K ± 0.20 ±(Ref) (.004 (.004 ± B C D X 3528-21 6032-28 7343-31 7343-43 (.287 ± .012) (.169 ± (.1 ± .012) 2.2 (.087) 2.2 (.087) 2.4 (.094) 2.4 (.094) 0.8 (.031) 1.3 (.051) 1.3 (.051) 1.3 (.051) (.016) 0.5 (.020) 0.5 (.020) 0.5 (.020) 1.1 (.043) 1.4 (.055) 1.5 (.059) 2.3 (.091) (.067) 1.0 1.0 1.0 1.0 (.005) 2.1 (.083) (.150) 1.8 (.071) 2.8 (.1 3.5 (.138) 2.2 (.087) (.094) (.138) (.138) DIMENSIONS — Millimeters (Inches) Time (Seconds) .0001 .001 .01 .1 1 10 TYPICAL FUSE ACTUATION PROFILE Current (Amps) SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630036

• Built-in fuse protects against damaging short circuit failure mode
• Precision-molded, laser-marked case
• Symmetrical, compliant terminations
• Taped and reeled per EIA 481-1
• Case geometry and footprints equivalent to Industrial Grade T491 Series. (Case sizes B, C, D and X only)
• 100% Surge Current test on C, D, X sizes
• Patented fuse assembly
• Operating Temperature: -55˚C to +125˚C
• Fuse actuation, 25/H11034C: within 1 second at fault currents of 4 amps and higher.
• Continuous current capability: 0.75 amps
• Post-actuation resistance, 25/H11034C: 10 megohms minimum
• Test tabs on the sides of the case bypass the capacitor element to allow direct testing of the fuse assembly.
• RoHS Compliant & Leadfree Terminations (See www.kemet.com for lead transition)

*Part number example: T496B105M025AT (14 digits - no spaces). See www.kemet.com for Pb Free transition. ** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix termination codes do not quarantee Pb-free product. *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007. “S” = Not Recommended

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 37 SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused Solid Tantalum Surface Mount T496 SERIES CONSTRUCTION Fuse Molded Case Silver Adhesive Washer Positive Termination* Weld Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Polarity Stripe (+) Polarity Bevel (+) *100% Tin CAPACITOR MARKINGS T496 Series — All Case Sizes T496 RATINGS & PART NUMBER REFERENCE Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "542" = The 42nd week of 2005 Polarity Indicator (+) (Solid Stripe) KEMET I. D. Symbol Rated Voltage Fused Fail-Safe Device Picofarad Code 227 20 K 542 (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert lead material designation for Ordering Information on page 36. Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substi- tutions will be marked with the higher voltage rating.

10 Volt Rating at +85°C (7 Volt Rating at + 125°C)

10 Volt Rating at +85°C (7 Volt Rating at +125°C) cont. Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 68.0 C T496C686(1)004A(2) E1K 6 2.7 6.0 1.6 68.0 C T496C686(1)004A(2) E40 0 2.7 6.0 0.4 100.0 C T496C107(1)004A(2) E1K 2 4.0 8.0 1.2 150.0 D T496D157(1)004A(2) E80 0 6.0 8.0 0.8 150.0 C T496C157(1)004A(2) E1K 2 6.0 8.0 1.2 220.0 D T496D227(1)004A(2) E70 0 8.8 8.0 0.7 220.0 D T496D227(1)004A(2) E40 0 8.8 8.0 0.4 #330.0 D T496D337(1)004A(2) E70 0 13.2 8.0 0.7 #330.0 D T496D337(1)004A(2) E40 0 13.2 8.0 0.4 330.0 X T496X337(1)004A(2) E700 13.2 8.0 0.7 #470.0 X T496X477(1)004A(2) E500 18.8 8.0 0.5 4.7 B T496B475(1)006A(2) E3K 5 0.5 6.0 3.5 6.8 B T496B685(1)006A(2) E3K 5 0.5 6.0 3.5 10.0 B T496B106(1)006A(2) E3K 5 0.6 6.0 3.5 15.0 C T496C156(1)006A(2) E2K 0 0.9 6.0 2.0 22.0 B T496B226(1)006A(2) E3K 5 1.3 6.0 3.5 22.0 B T496B226(1)006A(2) E1K 5 1.3 6.0 1.5 22.0 C T496C226(1)006A(2) E2K 0 1.4 6.0 2.0 33.0 C T496C336(1)006A(2) E2K 0 2.0 6.0 2.0 33.0 C T496C336(1)006A(2) E60 0 2.0 6.0 0.6 47.0 C T496C476(1)006A(2) E1K 6 2.9 6.0 1.6 47.0 C T496C476(1)006A(2) E60 0 2.9 6.0 0.6 47.0 D T496D476(1)006A(2) E1K 0 2.9 6.0 1.0 #68.0 C T496C686(1)006A(2) E1K 2 4.1 6.0 1.2 68.0 D T496D686(1)006A(2) E1K 0 4.1 6.0 1.0 100.0 X T496X107(1)006A(2) E900 6.0 8.0 0.9 100.0 X T496X107(1)006A(2) E300 6.0 8.0 0.3 100.0 D T496D107(1)006A(2) E80 0 6.0 8.0 0.8 100.0 D T496D107(1)006A(2) E40 0 6.0 8.0 0.4 #100 C T496C107(1)006A(2) E40 0 6.0 8.0 0.4 150.0 X T496X157(1)006A(2) E300 9.0 8.0 0.3 150.0 D T496D157(1)006A(2) E70 0 9.0 8.0 0.7 150.0 D T496D157(1)006A(2) E30 0 9.0 8.0 0.3 220.0 X T496X227(1)006A(2) E700 13.2 8.0 0.7 220.0 X T496X227(1)006A(2) E300 13.2 8.0 0.3 #220.0 D T496D227(1)006A(2) E70 0 13.2 8.0 0.7 #220.0 D T496D227(1)006A(2) E30 0 13.2 8.0 0.3 #330.0 X T496X337(1)006A(2) E500 19.8 8.0 0.5 #330.0 X T496X337(1)006A(2) E300 19.8 8.0 0.3 3.3 B T496B335(1)010A(2) E3K 5 0.5 6.0 3.5 4.7 B T496B475(1)010A(2) E3K 5 0.5 6.0 3.5 6.8 B T496B685(1)010A(2) E3K 5 0.7 6.0 3.5 10.0 C T496C106(1)010A(2) E2K 0 1.0 6.0 2.0 15.0 B T496B156(1)010A(2) E3K 5 1.5 6.0 3.5 15.0 C T496C156(1)010A(2) E2K 0 1.5 6.0 2.0 15.0 C T496C156(1)010A(2) E60 0 1.5 6.0 0.6 22.0 C T496C226(1)010A(2) E2K 0 2.2 6.0 2.0 22.0 C T496C226(1)010A(2) E50 0 2.2 6.0 0.5 33.0 D T496D336(1)010A(2) E1K 0 3.3 6.0 1.0 33.0 D T496D336(1)010A(2) E40 0 3.3 6.0 0.4 33.0 C T496C336(1)010A(2) E1K 6 3.3 6.0 1.6 33.0 C T496C336(1)010A(2) E40 0 3.3 6.0 0.4 4 Volt Rating at +85°C (2.7 Volt Rating at +125°C) **6 Volt Rating at +85°C (4 Volt Rating at +125°C) tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 47.0 D T496D476(1)010A(2) E1K 0 4.7 6.0 1.0 47.0 D T496D476(1)010A(2) E40 0 4.7 6.0 0.4 #47.0 C T496C476(1)010A(2) E1K 2 4.7 6.0 1.2 #47.0 C T496C476(1)010A(2) E40 0 4.7 6.0 0.4 68.0 X T496X686(1)010A(2) E900 6.8 6.0 0.9 68.0 D T496D686(1)010A(2) E80 0 6.8 6.0 0.8 68.0 D T496D686(1)010A(2) E40 0 6.8 6.0 0.4 100.0 X T496X107(1)010A(2) E400 10.0 8.0 0.4 100.0 D T496D107(1)010A(2) E70 0 10.0 8.0 0.7 100.0 D T496D107(1)010A(2) E40 0 10.0 8.0 0.4 150.0 X T496X157(1)010A(2) E700 15.0 8.0 0.7 150.0 X T496X157(1)010A(2) E400 15.0 8.0 0.4 #150.0 D T496D157(1)010A(2) E70 0 15.0 8.0 0.7 #150.0 D T496D157(1)010A(2) E40 0 15.0 8.0 0.4 #220.0 X T496X227(1)010A(2) E500 22.0 8.0 0.5 #220.0 X T496X227(1)010A(2) E300 22.0 8.0 0.3 #220.0 D T496D227(1)010A(2) E30 0 22.0 8.0 0.3 2.2 B T496B225(1)016A(2) E3K 5 0.5 6.0 3.5 3.3 B T496B335(1)016A(2) E3K 5 0.5 6.0 3.5 3.3 B T496B335(1)016A(2) E2K1 0.5 6.0 2.1 4.7 B T496B475(1)016A(2) E3K 5 0.8 6.0 3.5 4.7 B T496B475(1)016A(2) E1K 6 0.8 6.0 1.6 6.8 C T496C685(1)016A(2) E2K 0 1.1 6.0 2.0 6.8 C T496C685(1)016A(2) E60 0 1.1 6.0 0.6 10.0 B T496B106(1)016A(2) E3K 5 1.6 6.0 3.5 10.0 C T496C106(1)016A(2) E2K 0 1.6 6.0 2.0 10.0 C T496C106(1)016A(2) E70 0 1.6 6.0 0.7 15.0 C T496C156(1)016A(2) E2K 0 2.4 6.0 2.0 15.0 C T496C156(1)016A(2) E60 0 2.4 6.0 0.6 22.0 D T496D226(1)016A(2) E1K 0 3.6 6.0 1.0 22.0 D T496D226(1)016A(2) E50 0 3.6 6.0 0.5 22.0 C T496C226(1)016A(2) E1K 6 3.6 6.0 1.6 22.0 C T496C226(1)016A(2) E1K 0 3.6 6.0 1.0 33.0 D T496D336(1)016A(2) E1K 0 5.3 6.0 1.0 33.0 D T496D336(1)016A(2) E40 0 5.3 6.0 0.4 47.0 X T496X476(1)016A(2) E900 7.5 6.0 0.9 47.0 X T496X476(1)016A(2) E400 7.5 6.0 0.4 47.0 D T496D476(1)016A(2) E80 0 7.5 6.0 0.8 47.0 D T496D476(1)016A(2) E40 0 7.5 6.0 0.4 100.0 X T496X107(1)016A(2) E700 16.0 8.0 0.7 10 Volt Rating at +85°C (7 Volt Rating at +125°C) cont.

16 Volt Rating at +85°C (10 Volt Rating at +125°C)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused Solid Tantalum Surface Mount T496 SERIES CONSTRUCTION T496 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert lead material designation for Ordering Information on page 36. Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substi- tutions will be marked with the higher voltage rating. Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 1.5 B T496B155(1)020A(2) E5K 0 0.5 6.0 5.0 2.2 B T496B225(1)020A(2) E3K 5 0.5 6.0 3.5 2.2 B T496B225(1)020A(2) E1K 6 0.5 6.0 1.6 3.3 B T496B335(1)020A(2) E3K 5 0.7 6.0 3.5 4.7 C T496C475(1)020A(2) E2K 0 1.0 6.0 2.0 6.8 C T496C685(1)020A(2) E2K 0 1.4 6.0 2.0 6.8 C T496C685(1)020A(2) E60 0 1.4 6.0 0.6 10.0 C T496C106(1)020A(2) E2K 0 2.0 6.0 2.0 10.0 C T496C106(1)020A(2) E80 0 2.0 6.0 0.8 15.0 D T496D156(1)020A(2) E1K 0 3.0 6.0 1.0 15.0 D T496D156(1)020A(2) E50 0 3.0 6.0 0.5 15.0 C T496C156(1)020A(2) E50 0 3.0 6.0 0.5 22.0 D T496D226(1)020A(2) E1K 0 4.4 6.0 1.0 22.0 D T496D226(1)020A(2) E50 0 4.4 6.0 0.5 33.0 X T496X336(1)020A(2) E900 6.6 6.0 0.9 33.0 X T496X336(1)020A(2) E400 6.6 6.0 0.4 33.0 D T496D336(1)020A(2) E400 6.6 6.0 0.4 47.0 X T496X476(1)020A(2) E300 9.4 6.0 0.3 47.0 D T496D476(1)020A(2) E30 0 9.4 6.0 0.3 0.68 B T496B684(1)025A(2) E6K 5 0.5 4.0 6.5 1.0 B T496B105(1)025A(2) E5K 0 0.5 4.0 5.0 1.0 B T496B105(1)025A(2) E3K 5 0.5 4.0 3.5 1.5 B T496B155(1)025A(2) E5K 0 0.5 6.0 5.0 1.5 B T496B155(1)025A(2) E1K 6 0.5 6.0 1.6 2.2 C T496C225(1)025A(2) E3K 5 0.6 6.0 3.5 3.3 C T496C335(1)025A(2) E2K 5 0.9 6.0 2.5 3.3 C T496C335(1)025A(2) E2K1 0.9 6.0 2.1

4.7 C T496C475(1)025A(2) E2K

5 1.2 6.0 2.5 4.7 C T496C475(1)025A(2) E1K 3 1.2 6.0 1.3 6.8 C T496C685(1)025A(2) E2K 0 1.7 6.0 2.0 6.8 C T496C685(1)025A(2) E60 0 1.7 6.0 0.6 10.0 C T496C106(1)025A(2) E60 0 2.5 6.0 0.6 10.0 D T496D106(1)025A(2) E1K 2 2.5 6.0 1.2 10.0 D T496D106(1)025A(2) E60 0 2.5 6.0 0.6 15.0 D T496D156(1)025A(2) E1K 0 3.8 6.0 1.0 15.0 D T496D156(1)025A(2) E50 0 3.8 6.0 0.5 22.0 X T496X226(1)025A(2) E900 5.5 6.0 0.9 22.0 X T496X226(1)025A(2) E400 5.5 6.0 0.4 22.0 D T496D226(1)025A(2) E80 0 5.5 6.0 0.8 22.0 D T496D226(1)025A(2) E40 0 5.5 6.0 0.4 tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 0.47 B T496B474(1)035A(2)E8K 0 0.5 4.0 8.0 0.47 B T496B474(1)035A(2)E2K 6 0.5 4.0 2.6 0.68 B T496B684(1)035A(2) E6K 5 0.5 4.0 6.5 1.0 B T496B105(1)035A(2) E5K 0 0.5 4.0 5.0 1.0 B T496B105(1)035A(2) E3K1 0.5 4.0 3.1 1.5 C T496C155(1)035A(2) E4K 5 0.5 6.0 4.5 1.5 C T496C155(1)035A(2) E2K 6 0.5 6.0 2.6 2.2 C T496C225(1)035A(2) E3K 5 0.8 6.0 3.5 2.2 C T496C225(1)035A(2) E1K 6 0.8 6.0 1.6 3.3 C T496C335(1)035A(2) E2K 5 1.2 6.0 2.5 3.3 C T496C335(1)035A(2) E90 0 1.2 6.0 0.9 4.7 D T496D475(1)035A(2) E1K 5 1.7 6.0 1.5 4.7 D T496D475(1)035A(2) E70 0 1.7 6.0 0.7 6.8 D T496D685(1)035A(2) E1K 3 2.4 6.0 1.3 6.8 D T496D685(1)035A(2) E75 0 2.4 6.0 0.75 10.0 X T496X106(1)035A(2) E1K0 3.5 6.0 1.0 10.0 X T496X106(1)035A(2) E500 3.5 6.0 0.5 10.0 D T496D106(1)035A(2) E40 0 3.5 6.0 0.5 15.0 X T496X156(1)035A(2) E900 5.3 6.0 0.9 15.0 X T496X156(1)035A(2) E500 5.3 6.0 0.5 15.0 D T496D156(1)035A(2) E50 0 5.3 6.0 0.5 22.0 X T496X226(1)035A(2) E300 7.7 6.0 0.3 0.15 B T496B154(1)050A(2) E16 K 0.5 4.0 16.0 0.22 B T496B224(1)050A(2) E14 K 0.5 4.0 14.0 0.22 B T496B224(1)050A(2) E10 K 0.5 4.0 10.0 0.33 B T496B334(1)050A(2) E10 K 0.5 4.0 10.0 0.33 B T496B334(1)050A(2) E2K 6 0.5 4.0 2.6 0.47 C T496C474(1)050A(2) E8K 0 0.5 4.0 8.0 0.47 C T496C474(1)050A(2) E1K 9 0.5 4.0 1.9 0.68 C T496C684(1)050A(2) E7K 0 0.5 4.0 7.0 0.68 C T496C684(1)050A(2) E1K 7 0.5 4.0 1.7 1.0 C T496C105(1)050A(2) E5K 5 0.5 4.0 5.5 1.0 C T496C105(1)050A(2) E2K 7 0.5 4.0 2.7 1.5 C T496C155(1)050A(2) E5K 0 0.8 6.0 5.0 1.5 C T496C155(1)050A(2) E2K 0 0.8 6.0 2.0 2.2 D T496D225(1)050A(2) E2K 5 1.1 6.0 2.5 2.2 D T496D225(1)050A(2) E90 0 1.1 6.0 0.9 3.3 D T496D335(1)050A(2) E2K 0 1.7 6.0 2.0 3.3 D T496D335(1)050A(2) E1K 0 1.7 6.0 1.0 4.7 X T496X475(1)050A(2) E1K5 2.4 6.0 1.5 4.7 X T496X475(1)050A(2) E400 2.4 6.0 0.4 4.7 D T496D475(1)050A(2) E40 0 2.4 6.0 0.4

50 Volt Rating at +85°C (33 Volt Rating at +125°C)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-63003 SOLID TANTALUM CHIP CAPACITORS T498 SERIES—HIGH TEMPERATURE (150°)

• 150°C Maximum temperature capability • 100% Accelerated steady state aging
• Temperature/Voltage derating: 2/3 at 150°C • 100% Surge current testing
• Self-healing mechanism • EIA standard case size
• Capacitance: 0.47 to 220μF • Voltage: 6 to 50 VDC
• Reliability: 0.5%/1000 Hrs. @ rated voltage • RoHS Compliant versions available @ rated temperature • Various termination options Dimensions - Millimeters (Inches) Outline Drawings

KEMET EIA L* W* H* ± 0.20 ± (.008) ±0.1 ± (.004) ± 0.3 ± (.012) B (Ref) ± 0.15 ± (.004) X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.9 (.035) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) B 3528-21 3.5 ± 0.2 (.138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.2 (.075 ± .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) C 6032-28 6.0 ± 0.3 (.236 ± .012) 3.2 ± 0.3 (.126 ± .012) 2.5 ± 0.3 .098 ± .012 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) D 7343-31 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 (.110 ± .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) X 7343-43 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.0 ± 0.3 (.157 ± .012) 2.3 (.091) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) T 498 X 227 M 010 A T E500 Tantalum Series 498 – High Temp (150°C) Case Size A,B,C,D,X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros. Capacitance Tolerance M = ±20% K = ±10% Voltage Note: 006 = 6.3 Failure Rate A = Not Applicable Lead Material T = 100% Tin G = Gold H = Tin/Lead ESR Note: in mOhm K designates “thousand” E1K5 = 1.5 Ohm E500 = 0.5 Ohm Termination cutout at KEMET’s Option, either end /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72/MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 (SnPb 5% Pb min) Solid Tantalum Surface Mount SOLID TANTALUM CHIP CAPACITORS T498 SERIES—HIGH TEMPERATURE (150°) T498 RATINGS & PART NUMBER REFERENCE Solid Tantalum Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Solid Tantalum Surface Mount SOLID TANTALUM CHIP CAPACITORS T498 SERIES—HIGH TEMPERATURE (150°) T498 RATINGS & PART NUMBER REFERENCE LAND PATTERN DIMENSIONS FOR REFLOW SOLDER KEMET/ EIA Size Code Pad Dimensions Z G X Y (Ref) C (Ref) Case Codes Tape & Reel Dimensions KEMET EIA Tape Width (mm) Pitch mm ± 0.1 Reel Quantity Part Sprocket 180mm (7”) 330mm (13”) A 3216-18 8 ± 0.3 8 4 2000 9000 B 3528-21 8 ± 0.3 8 4 2000 8000 C 6032-28 12 ± 0.3 8 4 500 3000 D 7343-31 12 ± 0.3 8 4 500 2500 X 7343-43 12 ± 0.3 8 4 500 2000 PACKAGING SPECIFICATIONS COMPONENT MARKING 227 10K 525 Polarity Indicator (+) Picofarad Code Rated Voltage Print Week Code 1st Digit = Year 2nd & 3rd Digits = Week “525” = 25th Week of 2005 KEMET ID (HT) KEMET High Temp (1) To complete KEMET part number, insert K - ± 10% or M - ±20% capacitance tolerance. (2) To complete KEMET part number, insert T for 100% tin, H for Sn/Pb or G for gold. ** 6 volt product equivalent to 6.3 volt product. Note: Higher voltage ratings, lower ESR and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. /MT67 /MT88 /MT71/MT114/MT105/MT100 /MT80/MT108/MT97/MT99/MT101/MT109/MT101/MT110/MT116 /MT67/MT111/MT117/MT114/MT116/MT121/MT97/MT114/MT100 /MT71/MT89 /MT90 Capaci- tance µF Case Size KEMET Part Number DC Leakage PA @ 25ºC Max DF % @ +25ºC 120 Hz Max ESR : @ +25°C 100 kHz Max 10.0 B T498B106(1)006A(2)E2K1 0.7 6.0 2.1 15.0 B T498B156(1)006A(2)E1K8 1.0 6.0 1.8 22.0 C T498C226(1)006A(2)E1K3 1.4 6.0 1.3 33.0 B T498B336(1)006A(2)E1K7 2.1 6.0 1.7 47.0 C T498C476(1)006A(2)E800 3.0 6.0 0.8 100.0 D T498D107(1)006A(2)E600 6.3 8.0 0.6 2.2 A T498A225(1)010A(2)E4K6 0.5 6.0 4.6 3.3 A T498A335(1)010A(2)E3K6 0.5 6.0 3.6 4.7 A T498A475(1)010A(2)E2K9 0.5 6.0 2.9 4.7 B T498B475(1)010A(2)E2K7 0.5 6.0 2.7 10.0 B T498B106(1)010A(2)E1K8 1.0 6.0 1.8 15.0 B T498B156(1)010A(2)E1K5 1.5 6.0 1.5 15.0 C T498C156(1)010A(2)E1K8 1.5 6.0 1.8 22.0 B T498B226(1)010A(2)E1K5 2.2 6.0 1.5 22.0 C T498C226(1)010A(2)E1K1 2.2 6.0 1.1 47.0 D T498D476(1)010A(2)E600 4.7 6.0 0.6 100.0 D T498D107(1)010A(2)E600 10.0 8.0 0.6 220.0 X T498X227(1)010A(2)E500 22.0 8.0 0.5 1.0 A T498A105(1)016A(2)E6K5 0.5 4.0 6.5 3.3 A T498A335(1)016A(2)E3K4 0.5 6.0 3.4 4.7 B T498B475(1)016A(2)E2K1 0.8 6.0 2.1 6.8 A T498A685(1)016A(2)E2K6 1.1 6.0 2.6 6.8 B T498B685(1)016A(2)E1K8 1.1 6.0 1.8 10.0 B T498B106(1)016A(2)E2K8 1.6 6.0 2.8 10.0 C T498C106(1)016A(2)E1K4 1.6 6.0 1.4 15.0 C T498C156(1)016A(2)E1K1 2.4 6.0 1.1 22.0 C T498C226(1)016A(2)E1K0 3.6 6.0 1.0 33.0 D T498D336(1)016A(2)E600 5.3 6.0 0.6 47.0 D T498D476(1)016A(2)E600 7.5 6.0 0.6 68.0 D T498D686(1)016A(2)E600 10.8 6.0 0.6 100.0 X T498X107(1)016A(2)E100 16.0 8.0 0.1 1.0 A T498A105(1)020A(2)E5K9 0.5 4.0 5.9 10.0 C T498C106(1)020A(2)E1K1 2.0 6.0 1.1 0.47 A T498A474(1)025A(2)E8K5 0.5 4.0 8.5 2.2 B T498B225(1)025A(2)E3K0 0.6 6.0 3.0 10.0 C T498C106(1)025A(2)E1K1 2.5 6.0 1.1 15.0 D T498D156(1)025A(2)E700 3.8 6.0 0.7 22.0 D T498D226(1)025A(2)E600 5.5 6.0 0.6 33.0 D T498D336(1)025A(2)E600 8.3 6.0 0.6 0.33 A T498A334(1)035A(2)E11K 0.5 4.0 11.0 1.0 A T498A105(1)035A(2)E10K 0.5 4.0 10.0 1.5 C T498C155(1)035A(2)E3K3 0.5 6.0 3.3 3.3 C T498C335(1)035A(2)E1K7 1.2 6.0 1.7 6.8 D T498D685(1)035A(2)E900 2.4 6.0 0.9 10.0 D T498D106(1)035A(20E700 3.5 6.0 0.7 22.0 X T498X226(1)035A(2)E500 7.7 6.0 0.5 33.0 X T498X336(1)035A(2)E500 11.6 6.0 0.5 3.3 D T498D335(1)050A(2)E1K1 1.7 6.0 1.1 10.0 D T498D106(1)050A(2)E1K0 5.0 6.0 1.0

25 Volt Rating at +85ºC (17 Volt Rating at +150ºC)

35 Volt Rating at +85ºC (24 Volt Rating at +150ºC)

50 Volt Rating at +85ºC (34 Volt Rating at +150ºC)

**6 Volt Rating at +85ºC ( 4 Volt Rating at +150ºC)

10 Volt Rating at +85ºC ( 7 Volt Rating at +150ºC)

16 Volt Rating at +85ºC (11 Volt Rating at +150ºC)

20 Volt Rating at +85ºC (13 Volt Rating at +150ºC)

• Ultra Low ESR < 30 mΩ
• New E/7260 Case with ESR < 18 mΩ
• Up to 5 Amps ripple current
• RoHS Compliant & Leadfree Termination (see www. kemet.com for lead transitions)
• Operating Temperature: -55˚C to +125˚C
• 100% accelerated steady-state aging
• 100% Surge current test
• Precision - molded, laser-marked case
• Symmetrical compliant terminations
• Taped and reeled per EIA 481-1

/MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 OUTLINE DRAWING DIMENSIONS - Millimeters (Inches) Notes: Metric Dimensions govern (Ref) - Dimensions provided for reference only. 2.3 (.091) K ± 0.20 ± (.008) 0.10 ± 0.10 (.004 ± .004) KEMET EIA LWH X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) X 7343-43 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.0 ± 0.3 (.157 ± .012) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) CASE SIZE COMPONENT S ± 0.3 ± (.012)F ± 0.1 ± (.004) B (Ref) ± 0.15 ± (.006) E 7260-38 7.3 ± 0.3 (.287 ± .012) 6.0 ± 0.3 (.236 ± .012) 3.6 ± 0.2 (.142 ± .008) 2.3 (.091) 4.1 (.161 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS T510 SERIES—High Capacitance-Low ESR (1) To complete KEMET part number insert "K" - ±10% or "M" - ±20% capacitance tolerance. (2) To complete KEMET part number, insert H (SnPb) or T 100% tin. *Part number example: T510X477M006AT (14 digits - no spaces). See www.kemet.com for Pb Free transition. ** “S” Termination codes are converting from 90 Sn/10 Pb to 100% tin finishes. Orders including “S” suffix termination codes do not quarantee Pb-free product. T510 RATINGS & PART NUMBER REFERENCE T510 ORDERING INFORMATION 25°C 85°C 125°C Capaci- tance µF Case Size

25 Volt Rating at +85°C (17 Volt Rating at 125°C)

µA @ 25°C Max DF % @ 25°C Max ESR m @ 25°C 100 kHz Max Ripple Current A rms @ 25°C 100 kHz, maxKEMET Part Number

50 Volt Rating at +85°C (33 Volt Rating at 125°C)

35 Volt Rating at +85°C (23 Volt Rating at 125°C)

4 Volt Rating at +85°C (2.7 Volt Rating at 125°C) 6/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C)

16 Volt Rating at +85°C (11 Volt Rating at 125°C)

20 Volt Rating at +85°C (13.4 Volt Rating at 125°C) Capacitance Tolerance M = ±20%, K = ±10% Series T510 - High Capacitance, Low ESR Lead Material T = 100% Tin (Sn) Plated H = (Sn) Solder-Coated (90% Sn/10% Pb) G = Gold Plated S = Not Recommended for new design Case Size E, X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Tantalum T 510 X 477 M 006 A T ESR E030 = ESR in Milliohmns = 30 mOhms Failure Rate A = Not Applicable Solid Tantalum Surface Mount 030 25°C 85°C 125°C Cap µF Case Size 4 Volt Rating at +85°C (2.7 Volt Rating at 125°C) 6/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C) µA @ +25°C Max DF % @ +25°C 120Hz Max ESR mΩ @ +25°C 100 kHz Max Ripple Current Arms @ +25°C, 100 kHz, max KEMET Part Number 25°C 85°C 125°C Case Size KEMET Part Number 20 Volt Rating at +85°C (13.4 Volt Rating at 125°C) Cap µF µA @ +25°C Max DF % @ +25°C 120Hz Max ESR mΩ @ +25°C 100 kHz Max Ripple Current Arms @ +25°C, 100 kHz, max (1) To complete KEMET part number insert "K" - ±10% or "M" - ±20% capacitance tolerance. (2) To complete KEMET part number, insert H (SnPb) or T - 100% tin. 25°C 85°C 125°C DC Leakage µA @ +25°C Max DF % @ +25°C 120Hz Max ESR mΩ @ +25°C 100 kHz Max Ripple Current Arms @ +25°C, 100 kHz, max 4 Volt Rating at +85°C (2.7 Volt Rating at 125°C) 6/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C) µF Case Size KEMET Part Number *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007. VOLTAGE

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS T510 SERIES—High Capacitance TYPICAL CAP FREQUENCY SCAN @ 25°C T510E108M004AS TYPICAL ESR/Z FREQUENCY SCAN @ 25°C T510E108M004AS Capacitance (μF) 100Hz 1kHz 10kHz 100kHz 1MHz 500 600 700 800 900 1000 1100 1200 1300 1400 1500 100Hz 1kHz 10kHz 100kHz 1MHz 100Hz 1kHz 10kHz 100kHz 1MHz .01 ESR ( ) Z ( ) (Ω) 100 150 200 250 300 350 400 450 500Capacitance (μF) 100Hz 1kHz 10kHz 100kHz 1MHz TYPICAL ESR/Z FREQUENCY SCAN @25˚C T510X477M006AS TYPICAL CAP FREQUENCY SCAN @25˚C T510X477M006AS T510 CAPACITOR MARKINGS 477 6 K 514 M+Ultra-Low ESR Device Picofarad Code KEMET I. D. Symbol Rated Voltage 1st Digit =Year 2nd & 3rd Digits = Week Polarity Indicator (+) (Solid Stripe) “514” = The 14th week of 2005. 477 Polarity Indicator (+) Lot Code Picofarad Code K Voltage Date Code V5 49 Date Code Month 1 = Jan 7 = Jul 2 = Feb 8= Aug 3 = Mar 9 = Sep 4 = Apr 10 = Oct 5 = May 11 = Nov 6 = Jun 12 = Dec Date Code Year S = 2004 T = 2005 U = 2006 V = 2007 W = 2008 X = 2009 KEMET Organic CAPACITOR ALTERNATE MARKINGS

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 14. High Temperature Life Test

• 105ºC, 0.8 x Rated Voltage, 2000 hours, 125ºC for T525, T530 Series Post Test Performance: a. Capacitance: within -20%/+10% of initial value b. DF: within initial limit c. DC Leakage: within 1.25 initial limits for T520; 2 x initial limit for T525, T530 d. ESR: within 2 x initial limit for T520, T530 ESR: within initial limit for T525 15. Storage Life Test
• 105ºC, 0VDC, 2000 Hours for T520; 125ºC for T525, T530 Post Test Perfomance: a. Capacitance: within -20%/+10% of initial value b. DF: within initial limit c. DC Leakage: within 1.25 initial limits for T520; 2 x initial limit for T525, T530 d. ESR: within 2 x initial limit for T520, T530 ESR: within initial limit for T525 16. Thermal Shock
• Mil-Std-202, Method 107, Condition B Minimum temperature is -55ºC Maximum temperature is +105ºC for T520; 125ºC for T525, T530

500 Cycles

Post Test Performance: a. Capacitance: within +10%/-20% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within 2 x initial limit 17. Moisture Resistance Testing

• J-Std-020 Steps 7a and 7b excluded, 0V, 21 cycles Post Test Performance: a. Capacitance: within ±30% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within initial limit e. JEDEC J-STD-020C Meets MSL Level 3 18. Load Humidity
• 85ºC, 85% RH, Rated Voltage, 500 Hours Post Test Performance: a. Capacitance: within +35%/-5% of initial value b. DF: within initial limit c. DC Leakage: within 5 x initial limit d. ESR: within 2 x initial limit 19. ESD
• Polymer tantalum capacitors are not sensitive to Electro-Static Discharge (ESD). 20. Failure Mechanism and Reliability The normal failure mechanism is dielectric break- down. Dielectric failure can result in high DC Leakage current and may proceed to the level of a short circuit. With sufficient time to charge, heal- ing may occur by one of two potential mecha- nisms. The polymer adjacent to the dielectric fault site may overheat and vaporize, disconnecting the fault site from the circuit. The polymer may also Actual power dissipated may be calculated from the following: P =I R Substituting I = E, P = E Z Z where: I = rms ripple current (amperes) E = rms ripple voltage (volts) P = power (watts) Z = impedance at specified frequency (ohms) R = equivalent series resistance at specified frequency (ohms) Using P max from Table 3, maximum allowable rms ripple current or voltage may be determined as follows: I(max) = /H20844P max/R E(max) = Z /H20844P max/R These values should be derated at elevated tem- peratures as follows: Temperature Derating Factor 85ºC .9 125ºC .4 ENVIRONMENTAL 12. Temperature Stability Mounted capacitors withstand extreme tempera- ture testing at a succession of continuous steps at +25ºC, -55ºC, +25ºC, +85ºC, +105ºC, +25ºC in that order*. Capacitors are allowed to stabilize at each temperature before measurement. Cap, DF, and DCL are measured at each temperature except DC Leakage is not measured at -55ºC. *Maximum temperature 125ºC for T525 and T530 series. Table 4 Acceptable limits are as follows: Step Temp. ΔCap DCL DF 1 +25ºC Specified Catalog Catalog Tolerance Limit Limit 2 -55ºC ±20% of N/A Catalog initial value Limit 3 +25ºC ±10% of Catalog Catalog initial value Limit Limit 4 +85ºC ±20% of 10x Catalog 1.2x Catalog initial value Limit Limit 5 +105ºC ±30% of 10x Catalog 1.5x Catalog (125ºC for initial value Limit Limit T525, T530) 6 +25ºC ±10% of Catalog Catalog initial value Limit Limit 13. Standard Life Test
• 85ºC, Rated Voltage, 2000 Hours Post Test Performance: a. Capacitance: within -20%/+10% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within initial limit COMPONENT PERFORMANCE CHARACTERISTICS CONDUCTIVE POLYMER CHIP CAPACITORS 14. High Temperature Life Test - 2000 Hours
• 105°C, T520 - 1.0 x Rated Voltage; 125°C, T525, T530 - .67 x Rated Voltage

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 26. Vibration

• Mil-Std-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20G Peak Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit 27. Shock
• Mil-Std-202, Method 213, Condition I,

Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR - within initial limit 28. Terminal Strength

• Pull Force
• One Pound (454 grams), 30 Seconds
• Tensile Force
• Four Pounds (1.8 kilograms), 60 Seconds
• Shear Force Table 5 Maximum Shear Loads Case Code Maximum Shear Loads KEMET EIA Kilograms Pounds A 3216-18 3.2 7.0 T 3528-12 3.6 8.0 B 3528-21 3.6 8.0 C 6032-28 4.5 10.0 V 7343-20 5.0 11.0 W 7343-15 5.0 11.0 D 7343-31 5.0 11.0 Y 7343-40 5.0 11.0 X 7343-43 5.0 11.0 Post Test Performance: a. Capacitance — within ±5% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR - within initial limit Failure rates may be improved in application by derating the voltage applied to the capacitor. KEMET recommends that KO-CAPs be derated to 90% or less of the rated voltage in application for part types ≤ 10V. Parts > 10V should be derat- ed to 80% or less of the rated voltage. KO-CAPs exhibit a benign failure mode in that they do not fail catastophically even under typical fault conditions. If a shorted capacitor is allowed to pass unlimited current, it may overheat and the case may discolor. But this is distinctly different from the “ignition” that may occur with standard MnO2 cathode tantalums. Replacement of the MnO2 by the polymer removes the oxygen that fuels ignition during a failure event. MECHANICAL 21. Resistance to Solvents
• Mil-Std-202, Method 215 Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit e. Physical — no degradation of case, terminals or marking 22. Fungus
• Mil-Std-810, Method 508 23. Flammability
• UL94 VO Classification Encapsulant materials meet this classifaction 24. Resistance to Soldering Heat
• Maximum Reflow +240 ±5ºC, 10 seconds
• Typical Reflow +230 ±5ºC, 30 seconds Post Test Performance: a. Capacitance — within ±10% of initial value b. DC Leakage — within initial limit c. Dissipation Factor — within initial limit d. ESR — within initial limit 25. Solderability
• Mil-Std-202, Method 208
• ANSI/J-STD-002, Test B Applies to Solder Coated terminations only. COMPONENT PERFORMANCE CHARACTERISTICS 4 lb. (1.8 Kg) oxidize into a more resistive material that elimi- nates the defect site in the dielectric and reduces the flow of current. Capacitor failure may be induced by exceeding the rated conditions of forward DC voltage, reverse DC voltage, surge current, power dissipa- tion or temperature. Excessive environmental stress, such as prolonged or high temperature reflow processes may also trigger dielectric failure CONDUCTIVE POLYMER CHIP CAPACITORS4 Conductive Polymer Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 to maximize the intergrity of the solder joint, and to minimize component rework due to unacceptable solder joints. Figure 5 illustrates pad geometry. The table pro- vides recommended pad dimensions for reflow sol- dering techniques. These dimensions are intended to be a starting point for circuit board designers, to be fine tuned, if necessary, based upon the pecu- liarities of the soldering process and/or circuit board design. Visit KEMET.com for Engineering Bulletin Number F-2100 entitled “Surface Mount Mounting Pad Dimensions and Considerations” for further details on this subject. 32. Soldering The T52X KO-CAP family has been designed for reflow solder processes. Solder-coated terminations have excellent wetting characteristics for high integrity solder fillets. Preheating of these components is rec- ommended to avoid extreme thermal stress. Pb (lead) Free peak temperature is 260˚C (with up to 3x reflow capabilities). Hand-soldering should be avoided. If necessary, it should be performed with care due to the difficulty in process control. Care should be taken to avoid contact of the soldering iron to the molded case.

APPLICATIONS

1. Handling Automatic handling of encapsulated components is enhanced by the molded case which provides com- patibility with all types of high speed pick and place equipment. Manual handling of these devices pre- sents no unique problems. Care should be taken with your fingers, however, to avoid touching the solder-coated terminations as body oils, acids and salts will degrade the solderability of these termina- tions. Finger cots should be used whenever manu- ally handling all solderable surfaces. 30. Termination Coating KEMET’s standard termination finish is 100% Sn. Standard terminations can be ordered with a “T” suffix in the lead material designator of the KEMET part number. Components ordered with the “T” suf- fix are Pb-Free/RoHS compliant and are backward and forward compatible with SnPb and Pb-Free sol- dering processes. 90Sn/10Pb terminations are also available and can be ordered with an “H” suffix. KEMET’s “S” suffix remains an active termination designator for current designs but is not recom- mended for new designs. Parts ordered with an “S” suffix are not guaranteed to be Pb-Free or RoHS compliant. Refer to www.kemet.com for information on Pb-Free transition. 31. Recommended Mounting Pad Geometries Proper mounting pad geometries are essential for successful solder connections. These dimensions are highly process sensitive and should be designed COMPONENT PERFORMANCE CHARACTERISTICS /MT67 /MT88 /MT71/MT114/MT105/MT100 /MT80/MT108/MT97/MT99/MT101/MT109/MT101/MT110/MT116 /MT67/MT111/MT117/MT114/MT116/MT121/MT97/MT114/MT100 /MT71/MT89 /MT90 CONDUCTIVE POLYMER CHIP CAPACITORS 100 150 200 250 300 0 50 100 150 200 250 300 Time (Seconds) Temperature (°C) 60 Sec. 45 Sec. 45 Sec. 5 Sec. 95 Sec. 90 Sec. Sn-Pb Profile Pb-Free Profile 260˚C Peak Temperature (3 Passes) Time/Temperature Soldering Profile Table 6 - Land Pattern Dimensions for Reflow Solder Pad Dimensions YC Z G X (ref) (ref) Y/7343-40 KEMET/EIA Size Code

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS The iron should be used to heat the solder pad, applying solder between the pad and the termina- tion, until reflow occurs. The iron should be removed. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and is not harmful to the product. Marking permanency is not affected by this change. The EIA standards for conductive polymer capaci- tors allows an ESR movement to 1.1 times (or 3 mil- liohms, whichever is greater) the catalog limit past mounting. 33. Washing Standard washing techniques and solvents are compatible with all KEMET surface mount tantalum capacitors. Solvents such as Freon TMC and TMS, Trichlorethane, methylene chloride, prelete, and iso- propyl alcohol are not harmful to these compo- nents. Please note that we are not endorsing the use of banned or restricted solvents. We are simply stating that they would not be harmful to the com- ponents. If ultrasonic agitation is utilized in the cleaning process, care should be taken to minimize energy levels and exposure times to avoid damage to the terminations. KEMET tantalum chips are also compatible with newer aqueous and semi-aqueous processes. 34. Encapsulations Under normal circumstances, potting or encapsula- tion of KEMET tantalum chips is not required. 35. Storage Environment Conductive polymer series (T520, T525, T530) are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are clas- sified as MSL (Moisture Sensitivity Level 3). Upon opening the moisture barrier bag, parts should be mounted within 7 days to prevent moisture absorp- tion and outgassing. If the 7 day window is exceed- ed, the parts can be baked per the instructions on the bag (168 hours at 40±5ºC). Series Case Size Typical Weight (mg) T52x A/3216-18 35 T52x C/6032-28 130 T52x D/7343-31 325 T52x X/7343-43 500 T52x T/3528-12 38 T52x V/7343-20 210 T530 D/7343-31 342 T530 Y/7343-40 480 T530 X/7343-43 515 T530 E/7360-38 650 T52x W/7343-15 172 T52x B/3528-21 65 COMPONENT WEIGHTS Polymer chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soft- en or warp, and tape peel force may increase. KEMET recommends that maximum storage tem- perature not exceed 40 degrees C, and the maxi- mum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized sol- derability, chip stock should be used promptly, preferably within 1.5 years of receipt. Conductive Polymer Surface Mount

CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 50 /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 OUTLINE DRAWING

• Polymer Cathode Technology • Use Up to 80% of Rated Voltage (20% Derating)
• Low ESR for part types > 10 Volts
• High Frequency Cap Retention • Capacitance 15 to 1000μF (±20%)
• No-Ignition Failure Mode • Voltage 2V to 25V
• Use Up to 90% of Rated Voltage (10% Derating) • EIA Standard Case Sizes for part types ≤ 10 Volts • 100% Surge Current Tested
• Halogen Free Epoxy • Operating Temperature -55ºC to +105ºC
• 100% Accelerated Steady State Aging • Self Healing Mechanism
• Volumetrically Efficient • RoHS Compiant & Leadfree Terminations (see www.kemet.com for lead transition) DIMENSIONS - MILLIMETERS T520 ORDERING INFORMATION T 520 Capacitance Picofarad Code Case Size A, T, B, C, V, W, D, Y , X Tantalum Series T520 - Low ESR Polymer V 157 M 006 S Capacitance Tolerance M = ± 20% Lead Material Failure Rate A - Not Applicable Voltage H - Tin/Lead (SnPb 5% Pb minimum) T - 100% Tin (Sn) Plated E015 ESR A *S - Not recommended for new design *See www.kemet.com for Pb Free transition information. First two digits represent significant figures. Third digit specifies number of zeros to follow. *100% Tin Case Size KEMET EIA L W H K ± 0.20 F ± 0.1 S ± 0.3 X(Ref) T(Ref) A(Min) G(ref) E(ref) *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007. KEMET Organic 157 K 512 KO Rated Voltage Polarity (+) Indicator Picofarad Code KEMET ID PWC 512 = 12th week of 2005 COMPONENT MARKING

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap T520 RATINGS & PART NUMBER REFERENCE product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating. T520V477M002 w/'T=20°C @ -55°C to 85°C w/'T= 2°C @ 105°C 470.0 V T520V477M002A(1)E040 94 10 40 1.8 0.6 47.0 A T520A476M2R5A(1)E090 12 8 90 0.9 0.3 56.0 T T520T566M2R5A(1)E040 14 6 40 1.3 0.4 56.0 T T520T566M2R5A(1)E070 14 8 70 1.0 0.3 68.0 A T520A686M2R5A(1)E070 17 8 70 1.0 0.3 68.0 A T520A686M2R5A(1)E080 17 8 80 1.0 0.3 100.0 T T520T107M2R5A(1)E070 25 8 70 1.0 0.3 100.0 B T520B107M2R5A(1)E035 25 8 35 1.6 0.5 100.0 B T520B107M2R5A(1)E040 25 8 40 1.5 0.5 100.0 B T520B107M2R5A(1)E070 25 8 70 1.1 0.3 150.0 U T520U157M2R5A(1)E055 38 8 55 1.3 0.4 220.0 B T520B227M2R5A(1)E025 55 8 25 1.8 0.6 220.0 B T520B227M2R5A(1)E030 55 8 30 1.7 0.5 220.0 B T520B227M2R5A(1)E035 55 8 35 1.6 0.5 220.0 B T520B227M2R5A(1)E070 55 8 70 1.1 0.3 220.0 C T520C227M2R5A(1)E025 55 8 25 2.1 0.7 220.0 C T520C227M2R5A(1)E045 55 8 45 1.6 0.5 220.0 V T520V227M2R5A(1)E007 55 10 7 4.2 1.3 220.0 V T520V227M2R5A(1)E009 55 10 9 3.7 1.2 220.0 V T520V227M2R5A(1)E012 55 10 12 3.2 1.0 220.0 V T520V227M2R5A(1)E015 55 10 15 2.9 0.9 220.0 V T520V227M2R5A(1)E025 55 10 25 2.2 0.7 220.0 V T520V227M2R5A(1)E045 55 10 45 1.7 0.5 220.0 D T520D227M2R5A(1)E007 55 10 7 4.6 1.5 220.0 D T520D227M2R5A(1)E040 55 10 40 1.9 0.6 330.0 B T520B337M2R5A(1)E045 83 8 45 1.4 0.4 330.0 B T520B337M2R5A(1)E070 83 8 70 1.1 0.3 330.0 C T520C337M2R5A(1)E015 83 8 15 2.7 0.8 330.0 C T520C337M2R5A(1)E018 83 8 18 2.4 0.8 330.0 C T520C337M2R5A(1)E025 83 8 25 2.1 0.7 330.0 C T520C337M2R5A(1)E045 83 8 45 1.6 0.5 330.0 W T520W337M2R5A(1)E040 83 10 40 1.7 0.5 330.0 V T520V337M2R5A(1)E006 83 10 6 4.6 1.4 330.0 V T520V337M2R5A(1)E007 83 10 7 4.2 1.3 330.0 V T520V337M2R5A(1)E009 83 10 9 3.7 1.2 330.0 V T520V337M2R5A(1)E012 83 10 12 3.2 1.0 330.0 V T520V337M2R5A(1)E015 83 10 15 2.9 0.9 330.0 V T520V337M2R5A(1)E018 83 10 18 2.6 0.8 330.0 V T520V337M2R5A(1)E025 83 10 25 2.2 0.7 330.0 V T520V337M2R5A(1)E040 83 10 40 1.8 0.6 330.0 D T520D337M2R5A(1)E006 83 10 6 5.0 1.7 330.0 D T520D337M2R5A(1)E007 83 10 7 4.6 1.5 470.0 V T520V477M2R5A(1)E007 118 10 7 4.2 1.3 470.0 V T520V477M2R5A(1)E009 118 10 9 3.7 1.2 470.0 V T520V477M2R5A(1)E012 118 10 12 3.2 1.0 470.0 V T520V477M2R5A(1)E015 118 10 15 2.9 0.9 470.0 V T520V477M2R5A(1)E018 118 10 18 2.6 0.8 470.0 C T520C477M2R5A(1)E025 118 8 25 2.0 0.6 470.0 C T520C477M2R5A(1)E045 118 8 45 1.5 0.5 470.0 D T520D477M2R5A(1)E006 118 10 6 5.0 1.7 470.0 D T520D477M2R5A(1)E007 118 10 7 4.6 1.5 470.0 D T520D477M2R5A(1)E009 118 10 9 4.1 1.3 680.0 D T520D687M2R5A(1)E010 170 10 10 3.9 1.2 680.0 D T520D687M2R5A(1)E015 170 10 15 3.2 1.0 680.0 D T520D687M2R5A(1)E040 170 10 40 1.9 0.6 680.0 Y T520Y687M2R5A(1)E015 170 10 15 3.3 1.0 680.0 Y T520Y687M2R5A(1)E025 170 10 25 2.5 0.8 1000.0 D T520D108M2R5A(1)E015 250 8 15 3.2 1.1 1000.0 D T520D108M2R5A(1)E030 250 10 30 2.2 0.7 1000.0 Y T520Y108M2R5A(1)E010 250 10 10 4.0 1.3 1000.0 Y T520Y108M2R5A(1)E015 250 10 15 3.3 1.0 1000.0 Y T520Y108M2R5A(1)E025 250 10 25 2.5 0.8 1000.0 X T520X108M2R5A(1)E010 250 10 10 4.1 1.3 100.0 B T520B107M003A(1)E035 30 8 35 1.6 0.5 100.0 B T520B107M003A(1)E040 30 8 40 1.5 0.5 100.0 B T520B107M003A(1)E070 30 8 70 1.1 0.3 150.0 B T520B157M003A(1)E035 45 8 35 1.6 0.5 150.0 B T520B157M003A(1)E040 45 8 40 1.5 0.5 150.0 B T520B157M003A(1)E070 45 8 70 1.1 0.3 330.0 V T520V337M003A(1)E009 99 10 9 3.7 1.2 330.0 V T520V337M003A(1)E012 99 10 12 3.2 1.0 330.0 V T520V337M003A(1)E015 99 10 15 2.9 0.9 330.0 V T520V337M003A(1)E025 99 10 25 2.2 0.7 680.0 D T520D687M003A(1)E015 204 10 15 3.2 1.0 680.0 D T520D687M003A(1)E040 204 10 40 1.9 0.6 1000.0 X T520X108M003A(1)E015 300 10 15 3.3 1.0 1000.0 X T520X108M003A(1)E030 300 10 30 2.3 0.7 15.0 T T520T156M004A(1)E100 6 8 100 0.8 0.3 33.0 A T520A336M004A(1)E070 13 8 70 1.0 0.3 33.0 A T520A336M004A(1)E080 13 8 80 1.0 0.3 47.0 A T520A476M004A(1)E070 19 8 70 1.0 0.3 47.0 A T520A476M004A(1)E080 19 8 80 1.0 0.3 47.0 T T520T476M004A(1)E070 19 8 70 1.0 0.3 68.0 T T520T686M004A(1)E070 27 8 70 1.0 0.3 68.0 B T520B686M004A(1)E035 27 8 35 1.6 0.5 68.0 B T520B686M004A(1)E040 27 8 40 1.5 0.5 68.0 B T520B686M004A(1)E070 27 8 70 1.1 0.3 68.0 U T520U686M004A(1)E055 27 8 55 1.3 0.4 100.0 B T520B107M004A(1)E035 40 8 35 1.6 0.5 100.0 B T520B107M004A(1)E040 40 8 40 1.5 0.5 100.0 B T520B107M004A(1)E070 40 8 70 1.1 0.3 100.0 U T520U107M004A(1)E055 40 8 55 1.3 0.4 150.0 B T520B157M004A(1)E025 60 8 25 1.8 0.6 150.0 B T520B157M004A(1)E030 60 8 30 1.7 0.5 150.0 B T520B157M004A(1)E035 60 8 35 1.6 0.5 150.0 B T520B157M004A(1)E040 60 8 40 1.5 0.5 150.0 B T520B157M004A(1)E070 60 8 70 1.1 0.3 150.0 U T520U157M004A(1)E055 60 8 55 1.3 0.4 150.0 C T520C157M004A(1)E015 60 8 15 2.7 0.9 150.0 C T520C157M004A(1)E025 60 8 25 2.1 0.7 150.0 C T520C157M004A(1)E045 60 8 45 1.6 0.5 Capaci- tance µF Case Size

3 Volt Rating @ 105°C

DF% @ 25°C 120 Hz Max ESR m: @ 25°C 100 kHz Max KEMET Part Number DC Leakage µA @ 25°C Max Ripple Current Arms @ 100 kHz Max

4 Volt Rating @ 105°C

2 Volt Rating @ 105°C

2.5 Volt Rating @ 105°C

w/ΔT=20°C @ -55°C to 85°C w/ΔT= 2°C @ 105°C 470.0 V T520V477M002A(1)E040 94 10 40 1.8 0.6 47.0 A T520A476M2R5A(1)E090 12 8 90 0.9 0.3 56.0 T T520T566M2R5A(1)E040 14 6 40 1.3 0.4 56.0 T T520T566M2R5A(1)E070 14 8 70 1.0 0.3 68.0 A T520A686M2R5A(1)E070 17 8 70 1.0 0.3 68.0 A T520A686M2R5A(1)E080 17 8 80 1.0 0.3 100.0 T T520T107M2R5A(1)E070 25 8 70 1.0 0.3 100.0 B T520B107M2R5A(1)E025 25 8 25 1.8 0.6 100.0 B T520B107M2R5A(1)E035 25 8 35 1.6 0.5 100.0 B T520B107M2R5A(1)E040 25 8 40 1.5 0.5 100.0 B T520B107M2R5A(1)E070 25 8 70 1.1 0.3 150.0 U T520U157M2R5A(1)E055 38 8 55 1.3 0.4 220.0 B T520B227M2R5A(1)E025 55 8 25 1.8 0.6 220.0 B T520B227M2R5A(1)E030 55 8 30 1.7 0.5 220.0 B T520B227M2R5A(1)E035 55 8 35 1.6 0.5 220.0 B T520B227M2R5A(1)E070 55 8 70 1.1 0.3 220.0 C T520C227M2R5A(1)E025 55 8 25 2.1 0.7 220.0 C T520C227M2R5A(1)E045 55 8 45 1.6 0.5 220.0 V T520V227M2R5A(1)E007 55 10 7 4.2 1.3 220.0 V T520V227M2R5A(1)E009 55 10 9 3.7 1.2 220.0 V T520V227M2R5A(1)E012 55 10 12 3.2 1.0 220.0 V T520V227M2R5A(1)E015 55 10 15 2.9 0.9 220.0 V T520V227M2R5A(1)E025 55 10 25 2.2 0.7 220.0 V T520V227M2R5A(1)E045 55 10 45 1.7 0.5 220.0 D T520D227M2R5A(1)E007 55 10 7 4.6 1.5 220.0 D T520D227M2R5A(1)E040 55 10 40 1.9 0.6 330.0 B T520B337M2R5A(1)E045 83 8 45 1.4 0.4 330.0 B T520B337M2R5A(1)E070 83 8 70 1.1 0.3 330.0 C T520C337M2R5A(1)E015 83 8 15 2.7 0.8 330.0 C T520C337M2R5A(1)E018 83 8 18 2.4 0.8 330.0 C T520C337M2R5A(1)E025 83 8 25 2.1 0.7 330.0 C T520C337M2R5A(1)E045 83 8 45 1.6 0.5 330.0 W T520W337M2R5A(1)E040 83 10 40 1.7 0.5 330.0 V T520V337M2R5A(1)E006 83 10 6 4.6 1.4 330.0 V T520V337M2R5A(1)E007 83 10 7 4.2 1.3 330.0 V T520V337M2R5A(1)E009 83 10 9 3.7 1.2 330.0 V T520V337M2R5A(1)E012 83 10 12 3.2 1.0 330.0 V T520V337M2R5A(1)E015 83 10 15 2.9 0.9 330.0 V T520V337M2R5A(1)E018 83 10 18 2.6 0.8 330.0 V T520V337M2R5A(1)E025 83 10 25 2.2 0.7 330.0 V T520V337M2R5A(1)E040 83 10 40 1.8 0.6 330.0 D T520D337M2R5A(1)E006 83 10 6 5.0 1.7 330.0 D T520D337M2R5A(1)E007 83 10 7 4.6 1.5 470.0 V T520V477M2R5A(1)E007 118 10 7 4.2 1.3 470.0 V T520V477M2R5A(1)E009 118 10 9 3.7 1.2 470.0 V T520V477M2R5A(1)E012 118 10 12 3.2 1.0 470.0 V T520V477M2R5A(1)E015 118 10 15 2.9 0.9 470.0 V T520V477M2R5A(1)E018 118 10 18 2.6 0.8 470.0 C T520C477M2R5A(1)E025 118 8 25 2.0 0.6 470.0 C T520C477M2R5A(1)E045 118 8 45 1.5 0.5 470.0 D T520D477M2R5A(1)E006 118 10 6 5.0 1.7 470.0 D T520D477M2R5A(1)E007 118 10 7 4.6 1.5 470.0 D T520D477M2R5A(1)E009 118 10 9 4.1 1.3 680.0 D T520D687M2R5A(1)E010 170 10 10 3.9 1.2 680.0 D T520D687M2R5A(1)E015 170 10 15 3.2 1.0 680.0 D T520D687M2R5A(1)E040 170 10 40 1.9 0.6 680.0 Y T520Y687M2R5A(1)E015 170 10 15 3.3 1.0 680.0 Y T520Y687M2R5A(1)E025 170 10 25 2.5 0.8 1000.0 D T520D108M2R5A(1)E015 250 8 15 3.2 1.1 1000.0 D T520D108M2R5A(1)E030 250 10 30 2.2 0.7 1000.0 Y T520Y108M2R5A(1)E010 250 10 10 4.0 1.3 1000.0 Y T520Y108M2R5A(1)E015 250 10 15 3.3 1.0 1000.0 Y T520Y108M2R5A(1)E025 250 10 25 2.5 0.8 1000.0 X T520X108M2R5A(1)E010 250 10 10 4.1 1.3 100.0 B T520B107M003A(1)E025 30 8 25 1.8 0.6 100.0 B T520B107M003A(1)E035 30 8 35 1.6 0.5 100.0 B T520B107M003A(1)E040 30 8 40 1.5 0.5 100.0 B T520B107M003A(1)E070 30 8 70 1.1 0.3 150.0 B T520B157M003A(1)E035 45 8 35 1.6 0.5 150.0 B T520B157M003A(1)E040 45 8 40 1.5 0.5 150.0 B T520B157M003A(1)E070 45 8 70 1.1 0.3 330.0 V T520V337M003A(1)E009 99 10 9 3.7 1.2 330.0 V T520V337M003A(1)E012 99 10 12 3.2 1.0 330.0 V T520V337M003A(1)E015 99 10 15 2.9 0.9 330.0 V T520V337M003A(1)E025 99 10 25 2.2 0.7 680.0 D T520D687M003A(1)E015 204 10 15 3.2 1.0 680.0 D T520D687M003A(1)E040 204 10 40 1.9 0.6 1000.0 X T520X108M003A(1)E015 300 10 15 3.3 1.0 1000.0 X T520X108M003A(1)E030 300 10 30 2.3 0.7 15.0 T T520T156M004A(1)E100 6 8 100 0.8 0.3 33.0 A T520A336M004A(1)E070 13 8 70 1.0 0.3 33.0 A T520A336M004A(1)E080 13 8 80 1.0 0.3 47.0 A T520A476M004A(1)E070 19 8 70 1.0 0.3 47.0 A T520A476M004A(1)E080 19 8 80 1.0 0.3 47.0 T T520T476M004A(1)E070 19 8 70 1.0 0.3 68.0 T T520T686M004A(1)E070 27 8 70 1.0 0.3 68.0 B T520B686M004A(1)E035 27 8 35 1.6 0.5 68.0 B T520B686M004A(1)E040 27 8 40 1.5 0.5 68.0 B T520B686M004A(1)E070 27 8 70 1.1 0.3 68.0 U T520U686M004A(1)E055 27 8 55 1.3 0.4 100.0 B T520B107M004A(1)E025 40 8 25 1.8 0.6 100.0 B T520B107M004A(1)E035 40 8 35 1.6 0.5 100.0 B T520B107M004A(1)E040 40 8 40 1.5 0.5 100.0 B T520B107M004A(1)E070 40 8 70 1.1 0.3 100.0 U T520U107M004A(1)E055 40 8 55 1.3 0.4 Ripple Current Arms @ 100 kHz Max tance µF Case Size DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max KEMET Part Number DC Leakage µA @ 25°C Max (1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. Conductive Polmer Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap Conductive Polymer Surface Mount T520 RATINGS & PART NUMBER REFERENCE product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating. (1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. w/ΔT=20°C @ -55°C to 85°C w/ΔT= 2°C @ 105°C 150.0 B T520B157M004A(1)E035 60 8 35 1.6 0.5 150.0 B T520B157M004A(1)E040 60 8 40 1.5 0.5 150.0 B T520B157M004A(1)E070 60 8 70 1.1 0.3 150.0 U T520U157M004A(1)E055 60 8 55 1.3 0.4 150.0 C T520C157M004A(1)E015 60 8 15 2.7 0.9 150.0 C T520C157M004A(1)E025 60 8 25 2.1 0.7 150.0 C T520C157M004A(1)E045 60 8 45 1.6 0.5 150.0 C T520C157M004A(1)E100 60 8 100 1.0 0.3 150.0 V T520V157M004A(1)E007 60 10 7 4.2 1.3 150.0 V T520V157M004A(1)E009 60 10 9 3.7 1.2 150.0 V T520V157M004A(1)E012 60 10 12 3.2 1.0 150.0 V T520V157M004A(1)E015 60 10 15 2.9 0.9 150.0 V T520V157M004A(1)E025 60 10 25 2.2 0.7 150.0 D T520D157M004A(1)E007 60 10 7 4.6 1.5 220.0 B T520B227M004A(1)E035 88 8 35 1.6 0.5 220.0 B T520B227M004A(1)E045 88 8 45 1.4 0.4 220.0 B T520B227M004A(1)E070 88 8 70 1.1 0.3 220.0 C T520C227M004A(1)E015 88 8 15 2.7 0.9 220.0 C T520C227M004A(1)E018 88 8 18 2.5 0.8 220.0 C T520C227M004A(1)E025 88 8 25 2.1 0.7 220.0 C T520C227M004A(1)E045 88 8 45 1.6 0.5 220.0 C T520C227M004A(1)E055 88 8 55 1.4 0.4 220.0 W T520W227M004A(1)E040 88 10 40 1.7 0.5 220.0 V T520V227M004A(1)E007 88 10 7 4.2 1.3 220.0 V T520V227M004A(1)E009 88 10 9 3.7 1.2 220.0 V T520V227M004A(1)E012 88 10 12 3.2 1.0 220.0 V T520V227M004A(1)E015 88 10 15 2.9 0.9 220.0 V T520V227M004A(1)E018 88 10 18 2.6 0.8 220.0 V T520V227M004A(1)E025 88 10 25 2.2 0.7 220.0 V T520V227M004A(1)E040 88 10 40 1.8 0.6 220.0 V T520V227M004A(1)E045 88 10 45 1.7 0.5 220.0 D T520D227M004A(1)E006 88 10 6 5.0 1.7 220.0 D T520D227M004A(1)E007 88 10 7 4.6 1.5 220.0 D T520D227M004A(1)E012 88 10 12 3.5 1.1 220.0 D T520D227M004A(1)E065 88 10 65 1.5 0.5 330.0 C T520C337M004A(1)E025 132 8 25 2.0 0.6 330.0 V T520V337M004A(1)E007 132 10 7 4.2 1.3 330.0 V T520V337M004A(1)E009 132 10 9 3.7 1.2 330.0 V T520V337M004A(1)E012 132 10 12 3.2 1.0 330.0 V T520V337M004A(1)E018 132 10 18 2.6 0.8 330.0 V T520V337M004A(1)E025 132 10 25 2.2 0.7 330.0 V T520V337M004A(1)E040 132 10 40 1.8 0.6 330.0 D T520D337M004A(1)E006 132 10 6 5.0 1.7 330.0 D T520D337M004A(1)E007 132 10 7 4.6 1.5 330.0 D T520D337M004A(1)E009 132 10 9 4.1 1.3 330.0 D T520D337M004A(1)E012 132 10 12 3.5 1.1 330.0 D T520D337M004A(1)E015 132 10 15 3.2 1.0 330.0 D T520D337M004A(1)E040 132 10 40 1.9 0.6 330.0 D T520D337M004A(1)E045 132 8 45 1.5 0.5 470.0 D T520D477M004A(1)E010 188 10 10 3.9 1.2 470.0 D T520D477M004A(1)E012 188 10 12 3.5 1.1 470.0 D T520D477M004A(1)E015 188 10 15 3.2 1.0 470.0 D T520D477M004A(1)E018 188 10 18 2.9 0.9 470.0 D T520D477M004A(1)E025 188 10 25 2.4 0.8 470.0 D T520D477M004A(1)E040 188 10 40 1.9 0.6 680.0 D T520D687M004A(1)E012 272 10 12 3.5 1.2 680.0 D T520D687M004A(1)E015 272 10 15 3.2 1.1 680.0 D T520D687M004A(1)E025 272 10 25 2.4 0.8 680.0 Y T520Y687M004A(1)E010 272 10 10 4.0 1.3 680.0 Y T520Y687M004A(1)E015 272 10 15 3.3 1.0 680.0 Y T520Y687M004A(1)E025 272 10 25 2.5 0.8 680.0 X T520X687M004A(1)E010 272 10 10 4.1 1.3 680.0 X T520X687M004A(1)E015 272 10 15 3.3 1.0 680.0 X T520X687M004A(1)E035 272 10 35 2.2 0.7 15.0 T T520T156M006A(1)E100 9.5 8 100 0.8 0.3 22.0 A T520A226M006A(1)E090 14 8 90 0.9 0.3 22.0 A T520A226M006A(1)E100 14 8 100 0.9 0.3 33.0 A T520A336M006A(1)E070 21 8 70 1.0 0.3 33.0 A T520A336M006A(1)E080 21 8 80 1.0 0.3 33.0 T T520T336M006A(1)E070 21 8 70 0.9 0.4 33.0 B T520B336M006A(1)E035 21 8 35 1.5 0.5 33.0 B T520B336M006A(1)E040 21 8 40 1.5 0.5 33.0 B T520B336M006A(1)E070 21 8 70 1.1 0.3 47.0 T T520T476M006A(1)E040 30 8 40 1.3 0.4 47.0 T T520T476M006A(1)E070 30 8 70 1.0 0.3 47.0 B T520B476M006A(1)E035 30 8 35 1.6 0.5 47.0 B T520B476M006A(1)E040 30 8 40 1.5 0.5 47.0 B T520B476M006A(1)E070 30 8 70 1.1 0.3 68.0 B T520B686M006A(1)E025 43 8 25 1.8 0.6 68.0 B T520B686M006A(1)E035 43 8 35 2.4 0.5 68.0 B T520B686M006A(1)E040 43 8 40 1.5 0.5 68.0 B T520B686M006A(1)E070 43 8 70 1.1 0.3 68.0 U T520U686M006A(1)E055 43 8 55 1.3 0.4 100.0 B T520B107M006A(1)E040 63 8 40 1.5 0.5 100.0 B T520B107M006A(1)E045 63 8 45 1.4 0.4 100.0 B T520B107M006A(1)E070 63 8 70 1.1 0.3 100.0 U T520U107M006A(1)E055 63 8 55 1.3 0.4 100.0 W T520W107M006A(1)E040 63 10 40 1.7 0.5 100.0 V T520V107M006A(1)E007 63 10 7 4.2 1.3 100.0 V T520V107M006A(1)E009 63 10 9 3.7 1.2 100.0 V T520V107M006A(1)E012 63 10 12 3.2 1.0 100.0 V T520V107M006A(1)E015 63 10 15 2.9 0.9 100.0 V T520V107M006A(1)E045 63 10 45 1.7 0.5 100.0 C T520C107M006A(1)E025 63 8 25 2.1 0.7 100.0 C T520C107M006A(1)E045 63 8 45 1.6 0.5 100.0 D T520D107M006A(1)E007 63 10 7 4.6 1.5 120.0 B T520B127M006A(1)E035 76 8 35 1.5 0.5 150.0 B T520B157M006A(1)E035 95 8 35 1.6 0.5 150.0 B T520B157M006A(1)E045 95 8 45 1.4 0.4 150.0 B T520B157M006A(1)E070 95 8 70 1.1 0.3 150.0 C T520C157M006A(1)E025 95 8 25 2.1 0.7 150.0 C T520C157M006A(1)E045 95 8 45 1.6 0.5 150.0 W T520W157M006A(1)E040 95 10 40 1.7 0.5 150.0 V T520V157M006A(1)E007 95 10 7 4.2 1.3 150.0 V T520V157M006A(1)E009 95 10 9 3.7 1.2 150.0 V T520V157M006A(1)E012 95 10 12 3.2 1.0 150.0 V T520V157M006A(1)E015 95 10 15 2.9 0.9 150.0 V T520V157M006A(1)E025 95 10 25 2.2 0.7 150.0 V T520V157M006A(1)E040 95 10 40 1.8 0.6 150.0 V T520V157M006A(1)E045 95 10 45 1.7 0.5 150.0 D T520D157M006A(1)E006 95 10 6 5.0 1.7 150.0 D T520D157M006A(1)E007 95 10 7 4.6 1.5 150.0 D T520D157M006A(1)E015 95 10 15 3.2 1.0 150.0 D T520D157M006A(1)E025 95 10 25 2.4 0.8 150.0 D T520D157M006A(1)E055 95 10 55 1.7 0.5 220.0 C T520C227M006A(1)E015 139 8 15 2.7 0.9 220.0 C T520C227M006A(1)E018 139 8 18 2.5 0.8 220.0 C T520C227M006A(1)E025 139 8 25 2.0 0.6 220.0 C T520C227M006A(1)E045 139 8 45 1.5 0.5 4 Volt Rating @ 105°C cont. DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max Ripple Current Arms @ 100 kHz MaxCapaci- tance µF Case Size KEMET Part Number

6.3 Volt Rating @ 105°C

µA @ 25°C Max

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap T520 RATINGS & PART NUMBER REFERENCE product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating.

25 Volt Rating @ 105°C

20 Volt Rating @ 105°C

w/ΔT=20°C @ -55°C to 85°C w/ΔT= 2°C @ 105°C 220.0 V T520V227M006A(1)E007 139 10 7 4.2 1.3 220.0 V T520V227M006A(1)E009 139 10 9 3.7 1.2 220.0 V T520V227M006A(1)E012 139 10 12 3.2 1.0 220.0 V T520V227M006A(1)E015 139 10 15 2.9 0.9 220.0 V T520V227M006A(1)E025 139 10 25 2.2 0.7 220.0 V T520V227M006A(1)E040 139 10 40 1.8 0.6 220.0 D T520D227M006A(1)E006 139 10 6 5.0 1.7 220.0 D T520D227M006A(1)E007 139 10 7 4.6 1.5 220.0 D T520D227M006A(1)E009 139 10 9 4.1 1.3 220.0 D T520D227M006A(1)E015 139 10 15 3.2 1.0 220.0 D T520D227M006A(1)E040 139 10 40 1.9 0.6 220.0 D T520D227M006A(1)E050 139 10 50 1.7 0.5 330.0 V T520V337M006A(1)E015 208 10 15 2.8 0.9 330.0 V T520V337M006A(1)E018 208 10 18 2.6 0.8 330.0 V T520V337M006A(1)E025 208 10 25 2.2 0.7 330.0 V T520V337M006A(1)E040 208 10 40 1.8 0.6 330.0 V T520V337M006A(1)E045 208 10 45 1.7 0.5 330.0 D T520D337M006A(1)E009 208 10 9 4.1 1.4 330.0 D T520D337M006A(1)E010 208 10 10 3.9 1.2 330.0 D T520D337M006A(1)E015 208 10 15 3.2 1.1 330.0 D T520D337M006A(1)E018 208 10 18 2.9 0.9 330.0 D T520D337M006A(1)E025 208 10 25 2.4 0.8 330.0 D T520D337M006A(1)E040 208 10 40 1.9 0.6 330.0 D T520D337M006A(1)E045 208 10 45 1.8 0.6 330.0 Y T520Y337M006A(1)E015 208 10 15 3.3 1.0 330.0 Y T520Y337M006A(1)E025 208 10 25 2.5 0.8 330.0 Y T520Y337M006A(1)E040 208 10 40 2.0 0.6 470.0 Y T520Y477M006A(1)E010 296 10 10 4.0 1.3 470.0 Y T520Y477M006A(1)E015 296 10 15 3.3 1.0 470.0 Y T520Y477M006A(1)E018 296 10 18 3.0 0.9 470.0 Y T520Y477M006A(1)E025 296 10 25 2.5 0.8 470.0 Y T520Y477M006A(1)E035 296 10 35 2.1 0.7 470.0 D T520D477M006A(1)E025 296 10 25 2.4 0.8 470.0 D T520D477M006A(1)E030 296 10 30 2.2 0.7 470.0 X T520X477M006A(1)E010 296 10 10 4.1 1.3 470.0 X T520X477M006A(1)E018 296 10 18 3.0 1.0 470.0 X T520X477M006A(1)E035 296 10 35 2.2 0.7 470.0 X T520X477M006A(1)E040 296 10 40 2.0 0.6 33.0 T T520T336M008A(1)E070 26 8 70 1.0 0.3 33.0 T T520T336M008A(1)E080 26 8 80 0.9 0.3 33.0 B T520B336M008A(1)E035 26 15 35 1.5 0.5 33.0 B T520B336M008A(1)E040 26 8 40 1.5 0.5 33.0 B T520B336M008A(1)E070 26 8 70 1.1 0.3 33.0 U T520U336M008A(1)E070 26 8 70 1.1 0.4 47.0 B T520B476M008A(1)E035 38 8 35 1.6 0.5 47.0 B T520B476M008A(1)E070 38 8 70 1.1 0.3 82.0 C T520C826M008A(1)E025 82 8 66 2.1 0.6 82.0 C T520C826M008A(1)E045 82 8 66 1.5 0.2 150.0 D T520D157M008A(1)E025 120 10 25 2.4 0.8 150.0 D T520D157M008A(1)E040 120 10 40 1.9 0.6 150.0 D T520D157M008A(1)E055 120 10 55 1.7 0.5 150.0 V T520V157M008A(1)E040 120 10 40 3.1 1.0 10.0 A T520A106M010A(1)E080 10 8 80 1.0 0.3 15.0 A T520A156M010A(1)E080 15 8 80 1.0 0.3 22.0 A T520A226M010A(1)E080 22 8 80 0.9 0.3 33.0 T T520T336M010A(1)E070 33 8 70 1.0 0.3 33.0 T T520T336M010A(1)E080 33 8 80 0.9 0.3 33.0 B T520B336M010A(1)E035 33 8 35 1.5 0.5 33.0 B T520B336M010A(1)E040 33 8 40 1.5 0.5 33.0 B T520B336M010A(1)E070 33 8 70 1.1 0.3 33.0 U T520U336M010A(1)E070 33 8 70 1.1 0.4 47.0 B T520B476M010A(1)E035 47 8 35 1.6 0.5 47.0 B T520B476M010A(1)E070 47 8 70 1.1 0.3 47.0 U T520U476M010A(1)E055 47 8 55 1.2 0.4 68.0 W T520W686M010A(1)E025 68 10 25 2.2 0.7 68.0 W T520W686M010A(1)E040 68 10 40 1.7 0.5 68.0 C T520C686M010A(1)E045 68 8 45 1.6 0.5 68.0 V T520V686M010A(1)E025 68 10 25 2.2 0.7 68.0 V T520V686M010A(1)E040 68 10 40 1.8 0.6 68.0 V T520V686M010A(1)E045 68 10 45 1.7 0.5 68.0 V T520V686M010A(1)E060 68 10 60 1.4 0.5 68.0 V T520V686M010A(1)E100 68 10 100 1.1 0.4 68.0 D T520D686M010A(1)E100 68 10 100 1.2 0.4 100.0 C T520C107M010A(1)E025 100 8 25 2.1 0.4 100.0 C T520C107M010A(1)E045 100 8 45 1.5 0.5 100.0 W T520W107M010A(1)E040 100 10 40 1.7 0.5 100.0 V T520V107M010A(1)E018 100 10 18 2.6 0.8 100.0 V T520V107M010A(1)E025 100 10 25 2.2 0.7 100.0 V T520V107M010A(1)E045 100 10 45 1.7 0.5 100.0 V T520V107M010A(1)E050 100 10 50 1.6 0.5 100.0 D T520D107M010A(1)E018 100 10 18 2.9 0.9 100.0 D T520D107M010A(1)E055 100 10 55 1.7 0.5 100.0 D T520D107M010A(1)E080 100 10 80 1.4 0.4 150.0 D T520D157M010A(1)E025 150 10 25 2.4 0.8 150.0 D T520D157M010A(1)E040 150 10 40 1.9 0.6 150.0 D T520D157M010A(1)E055 150 10 55 1.7 0.5 220.0 Y T520Y227M010A(1)E040 220 10 40 2.0 0.6 220.0 D T520D227M010A(1)E018 220 10 18 2.9 0.9 220.0 D T520D227M010A(1)E025 220 10 25 2.4 0.8 220.0 D T520D227M010A(1)E040 220 10 40 1.9 0.6 330.0 Y T520Y337M010A(1)E015 330 10 15 3.3 1.0 330.0 Y T520Y337M010A(1)E035 330 10 35 2.1 0.4 330.0 X T520X337M010A(1)E010 330 10 10 4.1 1.3 330.0 X T520X337M010A(1)E025 330 10 25 2.6 0.8 330.0 X T520X337M010A(1)E040 330 10 40 2.0 0.6 33.0 W T520W336M016A(1)E045 53 10 60 1.6 0.5 33.0 V T520V336M016A(1)E045 53 10 45 1.7 0.5 33.0 V T520V336M016A(1)E060 53 10 60 1.4 0.5 33.0 V T520V336M016A(1)E070 53 10 70 1.9 0.4 47.0 W T520W476M016A(1)E045 75 10 45 1.6 0.5 47.0 V T520V476M016A(1)E045 75 10 45 1.7 0.5 47.0 V T520V476M016A(1)E070 76 10 70 1.3 0.4 47.0 D T520D476M016A(1)E035 75 10 35 2.1 0.7 47.0 D T520D476M016A(1)E070 75 10 70 1.5 0.5 68.0 D T520D686M016A(1)E050 109 10 50 1.7 0.5 150.0 X T520X157M016A(1)E040 240 10 40 2.6 0.8 22.0 V T520V226M020A(1)E040 44 10 40 1.8 0.6 22.0 V T520V226M020A(1)E045 44 10 45 1.6 0.2 22.0 V T520V226M020A(1)E090 44 10 90 1.2 0.4 15.0 D T520D156M025A(1)E060 38 10 60 1.6 0.5 15.0 D T520D156M025A(1)E080 38 10 80 1.4 0.4 tance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max 6.3 Volt Rating @ 105°C cont.

16 Volt Rating @ 105°C

10 Volt Rating @ 105°C

8 Volt Rating @ 105°C

DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max Ripple Current Arms @ 100 kHz Max (1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. Conductive Polmer Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS T525 SERIES - High Temperature /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT72/MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 T525 Temperature/ Application Recommended Voltage Derating 100%100%100%100% 90%90%90% 90% 80%80% 80% 80% 50% 60% 70% 80% 90% 100% -55 25 85 105 125 Temperature (˚ C) % Rated Voltage 53% 60% 67% T525 Rated Voltage with temperature derating T525 Recommended Application Voltage with temperature derating (Vr>10VDC) T525 Recommended Application Voltage with temperature derating (Vr<10VDC) RECOMMENDED TEMPERATURE/VOLTAGE DERATING COMPONENT MARKING DIMENSIONS - MILLIMETERS KEMET EIA T (Ref) A (Min) G (Ref) E (Ref)K ±0.20 F ±0.1 S ±0.3 X (Ref)Case Size LW H Conductive Polymer Surface Mount PWC 504=4th week of 2005

• Polymer Cathode Technology
• 125ºC Maximum Temperature Capability
• High Frequency Capacitance Retention
• Non-Ignition Failure Mode
• Capacitance: 33 - 680μF
• Voltage: 2.5 to 16 volts
• Use up to 90% of Rated Voltage (10% Derating) for part types ≤ 10 Volts
• Use up to 80% of Rated Voltage (20% Derating) for part types >10 Volts
• Operating Temperature -55ºC to +125ºC
• 100% Accelerated Steady State Aging
• 100% Surge Current Testing
• Self-Healing Mechanism
• Volumetrically Efficient
• Extremely Stable ESR at 125ºC
• EIA Standard Case Size
• RoHS Compliant / Leadfree Termination (See www.kemet.com for lead transition) Polarity Indicator (+) (Solid Stripe) Picofarad Code KEMET I.D. Symbol KEMET High Temperature Tantalum Polymer (KT) Rated Voltage 477 504 KT

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS T525 SERIES - High Temperature T 525 Capacitance Picofarad Code Case Size B, D, T Tantalum Series T525 - High Temperature D 337 M 006 T Capacitance Tolerance M = ± 20% Lead Material Failure Rate A - Not Applicable Voltage T - 100% Tin E040 ESR A First two digits represent significant figures. Third digit specifies number of zeros to follow. Tantalum Polymer (KT) Note: 006 - 6.3 Expressed in milliohms H - Tin/Lead (SnPb 5% Pb minimum) T525 ORDERING INFORMATION T525 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert lead material designation for ordering information below. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating. w/'T= 20°C @ -55°C to 105°C w/'T= 2°C @ 125°C 100.0 T T525T107M2R5A(1)E080 25 8.0 80 0.9 0.3 330.0 D T525D337M2R5A(1)E025 83 10.0 25 2.4 0.8 470.0 D T525D477M2R5A(1)E025 118 10.0 25 2.4 0.8 680.0 D T525D687M2R5A(1)E025 170 10.0 25 2.4 0.8 100.0 B T525B107M003A(1)E080 30 8.0 80 1.0 0.3 150.0 B T525B157M003A(1)E080 45 8.0 80 1.0 0.3 330.0 D T525D337M003A(1)E025 99 10.0 25 2.4 0.8 470.0 D T525D477M003A(1)E025 141 10.0 25 2.4 0.8 680.0 D T525D687M003A(1)E025 204 10.0 25 2.4 0.8 68.0 T T525T686M004A(1)E080 27 8.0 80 0.9 0.3 68.0 B T525B686M004A(1)E080 28 8.0 80 1.0 0.3 100.0 B T525B107M004A(1)E080 40 8.0 80 1.0 0.3 220.0 D T525D227M004A(1)E025 88 10.0 25 2.4 0.8 330.0 D T525D337M004A(1)E025 132 10.0 25 2.4 0.8 470.0 D T525D477M004A(1)E025 188 10.0 25 2.4 0.8 470.0 D T525D477M004A(1)E040 188 10.0 40 1.9 0.6 33.0 B T525B336M006A(1)E080 21 8.0 80 1.0 0.3 47.0 T T525T476M006A(1)E080 30 8.0 80 0.9 0.3 47.0 B T525B476M006A(1)E080 30 8.0 80 1.0 0.3 68.0 B T525B686M006A(1)E080 43 8.0 80 1.0 0.3 150.0 D T525D157M006A(1)E025 95 10.0 25 2.4 0.8 220.0 D T525D227M006A(1)E025 139 10.0 25 2.4 0.8 330.0 D T525D337M006A(1)E025 208 10.0 25 2.4 0.8 330.0 D T525D337M006A(1)E040 208 10.0 40 1.9 0.6 33.0 T T525T336M008A (1)E080 26 8.0 80 0.9 0.3 22.0 B T525B226M010A(1)E080 22 8.0 80 1.0 0.3 33.0 T T525T336M010A(1)E080 33 8.0 80 0.9 0.3 33.0 B T525B336M010A(1)E080 33 8.0 80 1.0 0.3 100.0 D T525D107M010A(1)E025 100 10.0 25 2.4 0.8 100.0 D T525D107M010A(1)E055 100 10.0 55 1.7 0.5 150.0 D T525D157M010A(1)E025 150 10.0 25 2.4 0.8 150.0 D T525D157M010A(1)E055 150 10.0 55 1.7 0.5 220.0 D T525D227M010A(1)E025 220 10.0 25 2.4 0.8 47.0 D T525D476M016A(1)E035 76 10.0 35 2.1 0.7 47.0 D T525D476M016A(1)E065 76 10.0 65 1.5 0.5 DF% @ 25°C 120 Hz Max ESR m: @ 25°C 100 kHz Max Capaci- tance μF Case Size KEMET Part Number DC Leakage μA @ 25°C Max Ripple Current (Arms) 100 kHz Max 2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)

3 Volt Rating at 105°C (2 Volt Rating at 125°C)

4 Volt Rating at 105°C (2.7 Volt Rating at 125°C) 6.3 Volt Rating at 105°C (4.2 Volt Rating at 125°C) 10 Volt Rating at 105°C (6.6 Volt Rating at 125°C) 16 Volt Rating at 105°C (10.6 Volt Rating at 125°C) 8 Volt Rating at 105°C (5.3 Volt Rating at 125°C) Conductive Polymer Surface Mount

KEMET EIA L W H K ±0.20 F ±0.1 S ±0.3 X(Ref) T(Ref) A(Min) G(ref) E(ref)

• Highest CV in Standard EIA Size
• Extremely Low ESR
• Operating Temperature: -55˚C to 125˚C
• Polymer Cathode Technology
• High Frequency Capacitance Retention
• Non-Ignition Failure Mode
• Capacitance: 150 to 1500 /H9262F
• Voltage: 2.5V to 10V
• Molded Case (pick-and-place precision)
• 100% Accelerated Steady State Aging
• 100% Surge Current Testing
• Utilizes Multiple Tantalum Anode Technology
• Volumetric Efficiency
• Use Up to 90% of Rated Voltage (10% Derating)
• Self-Healing Mechanism
• True SMT Capability
• RoHS Compliant/Lead Free /MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110/MT32/MT78/MT111/MT116/MT99/MT104 /MT32/MT97/MT116/MT32/MT75/MT69/MT77/MT69/MT84/MT146/MT115/MT32/MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT69/MT105/MT116/MT104/MT101/MT114/MT32/MT69/MT110/MT100 CONDUCTIVE POLYMER CHIP CAPACITORS T530 SERIES - High Capacitance/Ultra-Low ESR Conductive Polymer Surface Mount T530 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert lead material designation from ordering information on page 56. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating. OUTLINE DRAWINGS DIMENSIONS - MILLIMETERS (INCHES) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 (1) To complete KEMET Part Number, insert lead material designation from ordering information on page 57. Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET's option. Voltage substitutions willl be marked with the higher voltage rating. w/'T= 20°C @ -55°C to 105°C w/'T= 2°C @ 125°C KEMET Part Number DCL V R DF % 120Hz ESR m:@100 kHz 25°C Max Ripple Current (Arms) @ 100 kHz 2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)

4 Volt Rating at 105°C (2.7 Volt Rating at 125°C) Capaci- tance µF Case Size w/'T= 20°C @ -55°C to 105°C w/'T= 2°C @ 125°C ESR m :@100 kHz 25°C Max Ripple Current (Arms) @ 100 kHzDF % 120Hz Capaci- tance µF Case Size KEMET Part Number DCL VR 16 Volt Rating at 105°C (10.6 Volt Rating at 125°C) 6.3 Volt Rating at 105°C (4.2 Volt Rating at 125°C) 10 Volt Rating at 105°C (6.6 Volt Rating at 125°C)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CONDUCTIVE POLYMER CHIP CAPACITORS T530 SERIES - High Capacitance/Ultra-Low ESR T 530 Capacitance Picofarad Code Case Size D, X, Y Tantalum Series T530 - Multiple Anode Polymer X 158 M 003 S Capacitance Tolerance M - ± 20% Lead Material Failure Rate A - Not Applicable Voltage Note: 006 = 6.3 H - T - 100% Tin G E008 ESR A *Refer to www.kemet.com for Pb Free transition information Expressed in Milliohms KMKM(KM) KEMET High Capacitance/ Ultra-Low ESR 158 505 Rated Voltage KEMET ID Picofarad Code PWC* Polarity Indicator T530 ORDERING INFORMATION COMPONENT MARKING T530X/T510E/T491E 1,000μF Capacitance vs. Frequency T530X/T510E/T491E 1,000μF Impedance & ESR vs. Frequency T530 SERIES CONSTRUCTION “505” = The 5th week of 2005. RECOMMENDED TEMPERATURE/VOLTAGE DERATING Tin/Lead (SnPb 5% Pb minimum) * S - Not recommended for new design Conductive Polymer Surface Mount *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007.

KEMETentered the world of aluminum capacitors with the introduction of the AO-CAP, designated the A700 Series, which has been targeted for power management applications. The structure of the AO-CAPuses alu- minum as the anode material, aluminum oxide as the dielectric, and a conductive organic polymer for its counter-electrode material. The A700 series is 100% screened for all electrical parameters: Capacitance @ 120Hz, Dissipation Factor (DF) @ 120 Hz, ESR @ 100 kHz, and DC Leakage. The AO-CAPoffers many advantages including extreme- ly low ESR, high capacitance retention at high operating frequencies, no dry-out related failure mechanism and no voltage de-rating up to125°C. ELECTRICAL 1. Operating Temperature Range

• -55°C to +125°C No derating with temperature is required. 2. Non-Operating Temperature Range
• -55°C to 125°C 3. Capacitance and Tolerance
• 22µF to 470µF
• ±20% Tolerance Capacitance is measured at 120 Hz, up to 1.0 volt rms maximum and up to 2.5V DC maximum. DC bias causes only a small reduction in capacitance, up to about 2% when full rated voltage is applied. DC bias is not commonly used for room temperature measurements but is more commonly used when measuring at temperature extremes. Capacitance does decrease with increasing fre- quency, but not nearly as much or as quickly as standard tantalums. Figure 1 compares the frequen- cy induced cap roll-off between the AO-CAPand tra- ditional MnO 2 types. Capacitance also increases with increasing temperature. See Section 12 for tem- perature coefficients. Figure 1. 4. Voltage Ratings
• 2 - 10 VDC Rated Voltage This is the maximum peak DC operating voltage from -55°C to +125°C for continuous duty. Surge Voltage Ratings Surge voltage capability is demonstrated by applica- tion of 1000 cycles of the relevant voltage at 25°C, 85°C, or 125 °C. The parts are charged through a 33 ohm resistor for 30 seconds and then discharged through a 33 ohm resistor for 30 seconds for each cycle. Voltage Ratings • Table 1 5. Reverse Voltage Rating & Polarity Aluminum polymer capacitors are polar devices and may be permanently damaged or destroyed if con- nected in the wrong polarity. The positive terminal is identified by a laser-marked stripe. These capacitors will withstand a certain degree of transient voltage reversal for short periods as shown in the following table. Please note that these parts may not be oper- ated continuously in reverse, even within these limits. Table 2 6. DC Leakage Current Because of the high conductivity of the polymer, the AO-CAPfamily has higher leakage currents than tra- ditional MnO 2 type Tantalum caps. The DC Leakage limits at 25°C are calculated as 0.06 x C x V, (where C is cap in µF and V is rated voltage in Volts) for part types with rated voltage ≤ 4V, and equals 0.04 x C x V, for voltages > 4V. Limits for all part numbers are listed in the ratings tables. Rated Surge Voltage Voltage -55°C to 125 °C 2V 2.6V 2.5V 3.2V 4V 5.2V 6.3V 8V 8V 10.4V 10V 13V Temperature Permissible Transient Reverse Voltage 25°C 60% of Rated Voltage 55°C 50% of Rated Voltage 85°C 40% of Rated Voltage 125°C 30% of Rated Voltage ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Aluminum Organic Capacitors ALUMINUM ORGANIC CAPACITORS Performance Characteristics

1. Temperature Stability Mounted capacitors withstand extreme temperature testing at a succession or continuous steps at order. Capacitors are allowed to stabilize at each temperature before measurement. Cap, DF, and DCLare measured at each temperature; except DC Leakage is not measured at -55°C. Table 4 - Acceptable limits are as follows: 12. Standard Life Test

• 85°C, Rated Voltage, 2000 Hours Post Test Performance: a. Capacitance: within ±10% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within initial limit 13. High Temperature Life Test
• 125°C, Rated Voltage, 2000 Hours Post Test Performance: a. Capacitance: within ±10% of initial value b. DF: within initial limit c. DC Leakage: within 1.25 x initial limit d. ESR: within 2 x initial limit 14. Storage Life Test
• 125°C, O VDC, 2000 Hours Post Test Performance: a. Capacitance: within ±10% of initial value b. DF: within initial limit c. DC Leakage: within 1.25 x initial limit d. ESR: within 2 x initial limit 15. Thermal Shock
• Mil-Std-202, Method 107, Condition B Minimum temperature is -55°C Maximum temperature is +125°C Post Test Performance: a. Capacitance: within ±10% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within 2 x initial limit 16. Moisture Sensitivity Level (MSL)
• J-Std-020 a. Capacitance: within ±30% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within 2 x initial limit Meets MSL3 requirements for SnPb assembly. 17. Load Humidity
• 85°C, 85% RH, Rated Voltage, 500 Hours a. Capacitance: within +30/-5% of initial value b. DF: within initial limit c. DC Leakage: within 5 x initial limit d. ESR: within 2 x initial limit 18. ESD
• Polymer Aluminum capacitors are not sensi- tive to Electro-Static Discharge (ESD). 19. Failure Mechanism and Reliability The normal failure mechanism is dielectric break down. Dielectric failure can result in high DC Leakage current and may proceed to the level of a short circuit. With sufficient time to charge, healing may occur by one of two potential mechanisms. The polymer adjacent to the dielectric fault site may over- heat and vaporize, disconnecting the fault site from the circuit. The polymer may also oxidize into a more resistive material that caps the defect site in the dielectric and reduces the flow of current. Capacitor failure may be induced by exceeding the rated conditions of forward DC voltage, reverse DC voltage, surge current, power dissipation or tempera- ture. Excessive environmental stress, such as pro- longed or high temperature reflow processes may also trigger dielectric failure. 20. Resistance to Solvents
• Mil-Std 202, Method 215 Post Test Performance: a. Capacitance: within ±10% of initial value b. DF: within initial limit c. DC Leakage: within initial limit d. ESR: within initial limit e.Physical: no degradation of case, terminals or marking 21. Fungus
• Mil-Std-810, Method 508 22. Flammability
• UL94 VO Classification Step Temp ∆∆Cap DCL DF 1 25°C Specified Tolerance Catalog Limit Catalog Limit 2 -55°C 15% of initial value N/A Catalog Limit 3 +25°C 5% of initial value Catalog Limit Catalog Limit 4 +85°C 15% of initial value 2X Catalog Limit Catalog Limit 5 +125°C 20% of initial value 2X Catalog Limit Catalog Limit 6 +25°C 5% of initial value Catalog Limit Catalog Limit ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 ALUMINUM ORGANIC CAPACITORS Performance Characteristics Aluminum Organic Capacitors

Table 6 - Land Pattern Dimensions for Reflow Solder 31. Soldering The A700 - AO-CAPfamily has been designed for reflow solder processes, or for wave soldering. The solder-coated terminations have excellent wetting characteristics for high integrity solder fillets. Preheating of these components is recommended to avoid extreme thermal stress. Figure 6 represents the recommended maximum solder temperature/ time combinations for these devices. Hand-soldering should be avoided. However, if nec- essary it should be performed with care due to the difficulty in process control. Care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termi- nation, until reflow occurs. The iron should be removed. "Wiping" the edges of a chip and heating the top surface is not recommended. Figure 6 Sn-Pb Profile measured on the surface of the component * Contact KEMET for the latest A700 Pb-free sol- dering recommendations. 32. Washing Standard washing techniques and solvents are com- patible with all KEMETsurface mount aluminum capacitors. Solvents such as Freon TMC and TMS, Trichlorethane, methylene chloride, prelate, and iso- propyl alcohol are not harmful to these components. Please note that we are not endorsing the use of banned or restricted solvents. We are simply stating that they would not be harmful to the components. If ultrasonic agitation is utilized in the cleaning process, care should be taken to minimize energy levels and exposure times to avoid damage to the terminations. KEMETAO-CAPS are also compatible with newer aqueous and semi-aqueous processes. 33. Encapsulations Under normal circumstances, potting or encapsula- tion of KEMETaluminum chips is not required. 34. Storage Environment AO capacitors are shipped in moisture barrier bags with a desiccant and mositure indicator card. This series is classified as MSL3 (Moisture Sensitivity Level 3). Upon opening the moisture barrier bag, parts should be mounted within 7 days to prevent mositure absorption and outgassing. If the 7 day window is exceeded, the parts can be dryed per the instructions on the bag (168 hours at 40 ± 5°C). AO capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term stor- age. In addition, packaging materials will be degrad- ed by high temperature (reels may soften or warp, and tape peel force may increase). KEMETrecom- mends that maximum storage temperature not exceed 40 degrees C, and the maximum storage humidity not to exceed 60% relative humidity. In addition, temperature fluctuations should be mini- mized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within 1.5 years of receipt. Component Marking Polarity (+) Indicator Picofarad Code KEMET ID 1st Digit = year 2nd & 3rd digits = Week Rated Voltage 476 424 Tape & Reel Packaging Case Codes Tape & Reel Dimensions KEMET EIA Tape Width mm Pitch mm ± 0.1 Reel Quantity Part Spro- cket 180mm (7” dia.) 330mm (13” dia.) V 7343-20 12 ± 0.3 8 4 1000 3000 D 7343-31 12 ± 0.3 8 4 500 2500 X 7343-43 12 ± 0.3 8 4 500 2000 KEMET/EIASize Code Pad Dimensions Z G X Y(Ref) C (Ref) D/7343-31, V/7343-20 Sn-Pb Profile Series Case Size Typical Weight (mg) A700 V/7343-20 120 A700 D/7343-31 190 A700 X/7343-43 260 Aluminum Component Weights ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 ALUMINUM ORGANIC CAPACITORS Performance Characteristics 100 150 200 250 300 0 50 100 150 200 250 300 Time (Seconds) Temperature (°C) 60 Sec. 45 Sec. 45 Sec. 5 Sec. 95 Sec. 90 Sec. Sn-Pb Profile Aluminum Organic Capacitors

• Input/Output Filters for voltage regulators, converters, and SMPS • Power Decoupling (Procesor, Transmitter circuits)
• Battery Decoupling (portable, handheld electronics) • Bulk Capacitor Requirements
• Polymer Cathode Technology • 100% Accelerated Steady State Aging
• Extremely Low ESR • Pb Free and RoHS Compliant
• High Frequency Capacitance Retention • Solid-state Technology
• Non-ignition Failure Mode • Molded Case with Wraparound Termination
• Capacitance: 22 to 470 µF • Voltage: 2 to 10V
• Self-healing Mechanism • No Reformation Required
• -55° to +125°C Capability • EIAStandard Case Size
• No temperature voltage Derating Up To 125°C • No Dry-out Related Failure Mechanism
• Robust to Surface Mount Process OUTLINE DRAWING Case Size KEMET EIA L W H K Min. F ±0.1 S ±0.2 DIMENSIONS - MILLIMETERS Note that glue pad shape may differ at KEMET’s discretion. K W H S S L F End View Side View Bottom View A700 ORDERING INFORMATION A 700 V 476 M 006 A T E018 Aluminum Series

700 Chip

V,D,X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros. Capacitance Tolerance M = ±20% Voltage As Shown Failure Rate Level A= Not Applicable Lead Material T= 100% Tin (Sn) Plated ESR ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Aluminum Organic Capacitors ALUMINUM ORGANIC CAPACITORS A700 Series

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 ALUMINUM ORGANIC CAPACITORS A700 Series A700 RATINGS & PART NUMBER REFERENCE Aluminum Organic Capacitors KEMET Part Number Case Size Cap µF DCL @VR DF @ 120 Hz ESR 100 kHz (mΩ) Ripple Current (Arms) @ 100kHz w/ΔT=+20°C @ -55°C to 125°C A700V107M002ATE018 V/7343-20 100.0 12.0 µA 6% 18 3.9 A700V107M002ATE025 V/7343-20 100.0 12.0 µA 6% 25 3.3 A700V107M002ATE028 V/7343-20 100.0 12.0 µA 6% 28 3.1 A700V127M002ATE018 V/7343-20 120.0 14.4 µA 6% 18 3.9 A700V127M002ATE025 V/7343-20 120.0 14.4 µA 6% 25 3.3 A700V127M002ATE028 V/7343-20 120.0 14.4 µA 6% 28 3.1 A700V157M002ATE009 V/7343-20 150.0 18.0 µA 6% 9 5.4 A700V157M002ATE018 V/7343-20 150.0 18.0 µA 6% 18 3.9 A700V157M002ATE025 V/7343-20 150.0 18.0 µA 6% 25 3.3 A700V157M002ATE028 V/7343-20 150.0 18.0 µA 6% 28 3.1 A700D187M002ATE015 D/7343-31 180.0 21.6 µA 6% 15 4.1 A700D187M002ATE018 D/7343-31 180.0 21.6 µA 6% 18 3.7 A700V227M002ATE009 V/7343-20 220.0 26.4µA 6% 9 5.5 A700D227M002ATE015 D/7343-31 220.0 26.4 µA 6% 15 4.1 A700D227M002ATE018 D/7343-31 220.0 26.4 µA 6% 18 3.7 A700X277M002ATE010 X/7343-43 270.0 32.4 µA 6% 10 4.7 A700X277M002ATE012 X/7343-43 270.0 32.4µA 6% 12 4.3 A700X277M002ATE015 X/7343-43 270.0 32.4 µA 6% 15 3.9 A700D337M002ATE007 D/7343-31 330.0 39.6µA 6% 7 6.0 A700X337M002ATE010 X/7343-43 330.0 39.6 µA 6% 10 4.7 A700X337M002ATE015 X/7343-43 330.0 39.6 µA 6% 15 3.9 A700X397M002ATE010 X/7343-43 390.0 46.8 µA 6% 10 4.7 A700X397M002ATE015 X/7343-43 390.0 46.8 µA 6% 15 3.9 A700X477M002ATE010 X/7343-43 470.0 56.4 µA 6% 10 4.7 A700X477M002ATE015 X/7343-43 470.0 56.4 µA 6% 15 3.9 A700V826M2R5ATE018 V/7343-20 82.0 12.3 µA 6% 18 3.9 A700V826M2R5ATE025 V/7343-20 82.0 12.3 µA 6% 25 3.3 A700V826M2R5ATE028 V/7343-20 82.0 12.3 µA 6% 28 3.1 A700D157M2R5ATE015 D/7343-31 150.0 22.5 µA 6% 15 4.1 A700D157M2R5ATE018 D/7343-31 150.0 22.5 µA 6% 18 3.7 A700D187M2R5ATE015 D/7343-31 180.0 27.0 µA 6% 15 4.1 A700D187M2R5ATE018 D/7343-31 180.0 27.0 µA 6% 18 3.7 A700X227M2R5ATE010 X/7343-43 220.0 33.0 µA 6% 10 4.7 A700X227M2R5ATE015 X/7343-43 220.0 33.0 µA 6% 15 3.9 A700X337M2R5ATE010 X/7343-43 330.0 49.5 µA 6% 10 4.7 A700X337M2R5ATE015 X/7343-43 330.0 49.5 µA 6% 15 3.9 A700V826M004ATE018 V/7343-20 82.0 19.7 µA 6% 18 3.9 A700V826M004ATE025 V/7343-20 82.0 19.7 µA 6% 25 3.3 A700V826M004ATE028 V/7343-20 82.0 19.7 µA 6% 28 3.1 A700D127M004ATE015 D/7343-31 120.0 28.8 µA 6% 15 4.1 A700D127M004ATE018 D/7343-31 120.0 28.8 µA 6% 18 3.7 A700D157M004ATE015 D/7343-31 150.0 36.0 µA 6% 15 4.1 A700D157M004ATE018 D/7343-31 150.0 36.0 µA 6% 18 3.7 A700D187M004ATE015 D/7343-31 180.0 43.2 µA 6% 15 4.1 A700D187M004ATE018 D/7343-31 180.0 43.2 µA 6% 18 3.7 A700X187M004ATE010 X/7343-43 180.0 43.2 µA 6% 10 4.7 A700X187M004ATE015 X/7343-43 180.0 43.2µA 6% 15 3.9 A700D227M004ATE009 X/7343-43 220.0 52.8 µA 6% 9 5.3 A700X227M004ATE009 X/7343-43 220.0 52.8 µA 6% 9 5.3 A700X227M004ATE010 X/7343-43 220.0 52.8 µA 6% 10 4.7 A700X227M004ATE015 X/7343-43 220.0 52.8 µA 6% 15 3.9 A700X277M004ATE010 X/7343-43 270.0 64.8 µA 6% 10 4.7 A700X277M004ATE015 X/7343-43 270.0 64.8 µA 6% 15 3.9 A700X337M004ATE010 X/7343-43 330.0 79.2 µA 6% 10 4.7 A700X337M004ATE015 X/7343-43 330.0 79.2 µA 6% 15 3.9

2 Volt Rating @ 125°C

2.5 Volt Rating @ 125°C

4 Volt Rating @ 125°C

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Aluminum Organic Capacitors ALUMINUM ORGANIC CAPACITORS A700 Series A700 RATINGS & PART NUMBER REFERENCE KEMET Part Number Case Size Cap µF DCL @VR DF @ 120 Hz ESR 100 kHz (m:) Ripple Current (Arms) @ 100kHz w/'T=+20°C @ -55°C to 125°C A700V226M006ATE028 V/7343-20 22.0 5.5 µA 6% 28 3.1 A700V226M006ATE045 V/7343-20 22.0 5.5 µA 6% 45 2.4 A700V336M006ATE018 V/7343-20 33.0 8.3 µA 6% 18 3.9 A700V336M006ATE025 V/7343-20 33.0 8.3 µA 6% 25 3.3 A700V336M006ATE028 V/7343-20 33.0 8.3 µA 6% 28 3.1 A700V476M006ATE018 V/7343-20 47.0 11.8 µA 6% 18 3.9 A700V476M006ATE025 V/7343-20 47.0 11.8 µA 6% 25 3.3 A700V476M006ATE028 V/7343-20 47.0 11.8 µA 6% 28 3.1 A700V566M006ATE018 V/7343-20 56.0 14.1 µA 6% 18 3.9 A700V566M006ATE025 V/7343-20 56.0 14.1 µA 6% 25 3.3 A700V566M006ATE028 V/7343-20 56.0 14.1 µA 6% 28 3.1 A700V686M006ATE018 V/7343-20 68.0 17.1 µA 6% 18 3.9 A700V686M006ATE025 V/7343-20 68.0 17.1 µA 6% 25 3.3 A700V686M006ATE028 V/7343-20 68.0 17.1 µA 6% 28 3.1 A700V826M006ATE018 V/7343-20 82.0 20.7 µA 6% 18 3.9 A700V826M006ATE025 V/7343-20 82.0 20.7 µA 6% 25 3.3 A700V826M006ATE028 V/7343-20 82.0 20.7 µA 6% 28 3.1 A700D107M006ATE015 D/7343-31 100.0 25.2 µA 6% 15 4.1 A700D107M006ATE018 D/7343-31 100.0 25.2 µA 6% 18 3.7 A700D127M006ATE012 D/7343-31 120.0 30.2 µA 6% 12 4.6 A700D127M006ATE015 D/7343-31 120.0 30.2 µA 6% 15 4.1 A700D127M006ATE018 D/7343-31 120.0 30.2 µA 6% 18 3.7 A700X157M006ATE010 X/7343-43 150.0 37.8 µA 6% 10 4.7 A700X157M006ATE012 X/7343-43 150.0 37.8µA 6% 12 4.3 A700X157M006ATE015 X/7343-43 150.0 37.8 µA 6% 15 3.9 A700X187M006ATE010 X/7343-43 180.0 45.4 µA 6% 10 4.7 A700X187M006ATE015 X/7343-43 180.0 45.4 µA 6% 15 3.9 A700X227M006ATE015 X/7343-43 220.0 55.4 µA 6% 15 3.9 A700V226M008ATE028 V/7343-20 22.0 7.0 µA 6% 28 3.1 A700V226M008ATE045 V/7343-20 22.0 7.0 µA 6% 45 2.4 A700V336M008ATE018 V/7343-20 33.0 10.6 µA 6% 18 3.9 A700V336M008ATE025 V/7343-20 33.0 10.6 µA 6% 25 3.3 A700V336M008ATE028 V/7343-20 33.0 10.6 µA 6% 28 3.1 A700D566M008ATE015 D/7343-31 56.0 17.9 µA 6% 15 4.1 A700D566M008ATE018 D/7343-31 56.0 17.9 µA 6% 18 3.7 A700D686M008ATE015 D/7343-31 68.0 21.8 µA 6% 15 4.1 A700D686M008ATE018 D/7343-31 68.0 21.8 µA 6% 18 3.7 A700X107M008ATE010 X/7343-43 100.0 32.0 µA 6% 10 4.7 A700X107M008ATE012 X/7343-43 100.0 32.0 µA 6% 12 4.3 A700X107M008ATE015 X/7343-43 100.0 32.0 µA 6% 15 3.9 A700V226M010ATE028 V/7343-20 22.0 8.8 µA 6% 28 3.1 A700V336M010ATE018 V/7343-20 33.0 13.2 µA 6% 18 3.9 A700V336M010ATE025 V/7343-20 33.0 13.2 µA 6% 25 3.3 A700V336M010ATE028 V/7343-20 33.0 13.2µA 6% 28 3.1 A700D566M010ATE015 D/7343-31 56.0 22.4 µA 6% 15 4.1 A700D566M010ATE018 D/7343-31 56.0 22.4 µA 6% 18 3.7 A700D686M010ATE015 D/7343-31 68.0 27.2 µA 6% 15 4.1 A700D686M010ATE018 D/7343-31 68.0 27.2 µA 6% 18 3.7 A700X107M010ATE010 X/7343-43 100.0 40.0 µA 6% 10 4.7 A700X107M010ATE015 X/7343-43 100.0 40.0 µA 6% 15 3.9 A700X127M010ATE010 X/7343-43 120.0 48.0 µA 6% 10 4.7 A700X127M010ATE015 X/7343-43 120.0 48.0 µA 6% 15 3.9 A700X157M010ATE010 X/7343-43 150.0 60.0 µA 6% 10 4.7 A700X157M010ATE015 X/7343-43 150.0 60.0 µA 6% 15 3.9 A700V106M12RATE060 V/7343-20 10.0 5.0 µA 6% 60 2.1 A700V156M12RATE040 V/7343-20 15.0 7.5 µA 6% 40 2.6 A700V226M12RATE030 V/7343-20 22.0 11.0 µA 6% 30 3.0 A700V685M016ATE070 V/7343-20 6.8 4.3 µA 6% 70 1.9 A700V825M016ATE070 V/7343-20 8.2 5.2 µA 6% 70 2.4

12.5 Volt Rating @ 125°C

16 Volt Rating @ 125°C

8 Volt Rating @ 125°C

10 Volt Rating @ 125°C

6.3 Volt Rating @ 125°C

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS INTRODUCTION Ceramic chips consist of formulated ceramic dielectric materials which have been fabricated into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminated structure. The entire structure is then fired at high temperature to produce a monolithic block which provides high capaci- tance values in a small physical volume. After firing, con- ductive terminations are applied to opposite ends of the chip to make contact with the exposed electrodes. Standard end terminations use a nickel barrier layer and a tin overplate to provide excellent solderability for the customer. KEMET multilayer ceramic chip capacitors are produced in plants designed specifically for chip capa- citor manufacture. The process features a high degree of mechanization as well as precise controls over raw materials and process conditions. Manufacturing is supplemented by extensive Technology, Engineering and Quality Assurance programs. KEMET ceramic chip capacitors are offered in the five most popular temperature characteristics. These are designated by the Electronics Industies Association (EIA) as the ultra-stable C0G (also known as NP0, military version BP), the stable X7R (military BX or BR), the stable X5R, and the general purpose Z5U and Y5V. A wide range of sizes are available. KEMET multi- layer ceramic chip capacitors are available in KEMET's tape and reel packaging, compatible with automatic placement equipment. Bulk cassette packaging is also available (0805,0603 and 0402 only) for those pick and place machines requiring its use.

ELECTRICAL CHARACTERISTICS

1. Working Voltage: Refers to the maximum continuous DC working voltage permissible across the entire operating temperature range. The reliability of multilayer ceramic capacitors is not extremely sensitive to voltage, and brief applications of voltage above rated will not result in immediate failure. However, reliability will be degraded by sustained exposure to voltages above rated. 2. Temperature Characteristics: Within the EIA classifications, various tempera- ture characteristics are identified by a three-symbol code; for example: C0G, X7R, X5R, Z5U and Y5V. For Class I temperature compensating dielectrics (includes C0G), the first symbol desig- nates the significant figures of the temperature coefficient in PPM per degree Celsius, the second designates the multiplier to be applied, and the third designates the tolerance in PPM per degrees Celsius. EIA temperature characteristic codes for Class I dielectrics are shown in Table 1. For Class II and III dielectrics (including X7R, X5R, Z5U & Y5V), the first symbol indicates the lower limit of the operating temperature range, the second indicates the upper limit of the operating temperature range, and the third indicates the maximum capacitance change allowed over the operating temperature range. EIA type designa- tion codes for Class II and III dielectrics are shown in Table 2. 3. Capacitance Tolerance: See tables on pages 73-76. 4. Capacitance: Within specified tolerance when measured per Table 3. The standard unit of capacitance is the farad. For practical capacitors, capacitance is usually expressed in microfarads (10 -6 farad), nanofarads (10 -9 farad), or picofarads (10 -12 farad). Standard measurement conditions are listed in Table 3 - Specified Electrical Limits. Like all other practical capacitors, multilayer ceramic capacitors also have resistance and inductance. A simplified schematic for the single frequency equivalent circuit is shown in Figure 1. At high frequency more complex models apply - see KEMET SPICE models at www.kemet.com for details. Table 1 – EIA Temperature Characteristic Codes for Class I Dielectrics Significant Figure of Temperature Coefficient Multiplier Applied to Temperature Coefficient Tolerance of Temperature Coefficient PPM per Degree C Letter Symbol Multi- plier Number Symbol Letter Symbol PPM per Degree C 0.0 0.3 0.9 1.0 1.5 C B A M P -10 -100 -1000 -10000 ± 30 ± 60 ± 120 ± 250 ± 500 G H J K L Table 2 – EIA Temperature Characteristic Codes for Class II & III Dielectrics Low Temperature Rating High Temperature Rating Maximum Capacitance Shift Degree Celsius Letter Symbol Degree Celsius Number Symbol Letter SymbolPercent +10C -30C -55C Z Y X +45C +65C +85C +105C +125C +150C +200C ± 1.0% ± 1.5% ± 2.2% ± 3.3% ± 4.7% ± 7.5% ± 10.0% ± 15.0% ± 22.0% + 22/-33% +22/-56% +22/-82% A B C D E F P R S T U V EIA Class II II II II II II II II III III III III KEMET supplies the C0G characteristic. KEMET supplies the X7R, X5R, Z5U and Y5V characteristics. Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS 5. Dissipation Factor: Measured under same conditions as capacitance. (See Table 3) Dissipation factor (DF) is a measure of the losses in a capacitor under AC application. It is the ratio of the equivalent series resistance to the capacitive reac- tance, and is usually expressed in percent. It is normal- ly measured simultaneously with capacitance, and under the same conditions. The vector diagram below illustrates the relationship between DF, ESR and impedance. The reciprocal of the dissipation factor is called the “Q” or quality factor. For convenience, the “Q” factor is often used for very low values of dissipa- tion factor especially when measured at high frequen- cies. DF is sometimes called the “loss tangent” or “tan- gent /H9254”, as shown in Figure 2. 6. Impedance: Since the parallel resistance (IR) is normally very high, the total impedance of the capacitor can be approximated by: The variation of a capacitor's impedance with fre- quency determines its effectiveness in many applica- tions. At high frequency more detailed models apply - see KEMET SPICE models for such instances. 7. Insulation Resistance: Measured after 2 minutes electrification at 25°C and rated voltage: Limits per Table 3. Insulation Resistance is the measure of a capacitor to resist the flow of DC leakage current. It is sometimes referred to as “leakage resistance ”. Insulation resis- tance (IR) is the DC resistance measured across the terminals of a capacitor, represented by the parallel resistance (IR) shown in Figure 1. For a given dielectric type, electrode area increases with capacitance, result- ing in a decrease in the insulation resistance. Consequently, insulation resistance limits are usually specified as the “RC” (IR x C) product, in terms of ohm- farads or megohm-micro-farads. The insulation resis- tance for a specific capacitance value is determined by dividing this product by the capacitance. However, as the nominal capacitance values become small, the insulation resistance calculated from the RC product reaches values which are impractical. Consequently, IR specifications usually include both a minimum RC prod- uct and a maximum limit based on the IR calculated Figure 1 C = Capacitance IR ESR C ESL ESL = Equivalent Series Inductance IR = Insulation Resistance ESR = Equivalent Series Resistance ESR x 100DF(%) = Xc Xc 2 π fC 1 = Figure 2 δ Ζ O Xc ESR Z = ESR + (XL - XC) Where : Z = Total Impedance ESR = Equivalent Series Resistance XC = Capacitive Reactance = 1/(2 πfC) XL = Inductive Reactance = (2 πf) (ESL) Figure 3 Table 3 – Specified Electrical Limits Parameter Temperature Characteristics C0G X7R/X5R Z5U Capacitance & Dissipation Factor: Measured at following conditions: C0G – 1kHz and 1 vrms if capacitance >1000 pF 1MHz and 1 vrms if capacitance ≤1000 pF X7R/X5R/Y5V – 1kHz and 1 vrms* if capacitance ≤ 10 µF Y5V Z5U – 1kHz and 0.5 vrms DF Limits: 50 - 200 volts – 25 volts – 16 volts – 6.3/10 volts – Dielectric Strength: At 2.5 times rated DC voltage Insulation Resistance (IR): At rated DC voltage, whichever of the two is smaller. To get IR limit, divide MΩ−µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits. Temperature: Range, °C Capacitance Change (without DC voltage) 0.10% 0.10% 2.5% 3.5% 3.5% 5.0% 2.5% 5.0% Pass Subsequent IR Test 1,000 MΩ – µF or 100 GΩ (100,000 MΩ) 1,000 MΩ – µF or 100 GΩ (100,000 MΩ)

100 MΩ – µF

or 10 GΩ (10,000 MΩ) -55 to +125 0 ± 30 ppm/°C -55 to +125 ± 15% +10 to +85 +22% -56% 5.0% 7.0% 7.0% 10.0% or 10 G (≥16 volt)

50 MΩ – µF

or 10G ( ≤10v) (10,000 MΩ) -30 to +85 +22% -82% 4.0% 4.0% X7R/X5R/Y5V – 120Hz and 0.5 vrms if capacitance > 10 µF X7R: -55 to +85 ± 15%X5R: **X5R Cap DF <25V <564 5.0% <25V ≥564 10.0% *Note: Some values measured at 1⁄2 volt, see X7R Table for specific details on pages 74 and 75.

the insulation resistance (Ohm's Law).

1. Dielectric Withstanding Voltage:

ited to 50mA at 25°C. Limits per Table 3. Table 3. Variations in these properties caused by and time) are covered in the following sections. and follows a logarithmic decay. regain the capacitance lost during the aging process. temperature and the length of time at that temperature. return the capacitor to its initial value. decline of capacitance after 1,000 hours is very low. upon the specific dielectric formulation. maximum rated temperature is 10% of the 25°C value. less variation than Y5V, but more than C0G.

20 VAC tends to increase the values of both the capaci-

tend to produce decreases in both. with applied DC voltage for some standard dielectrics. for free downloading at our website (www.kemet.com). capacitors are shown in Figures 4, 5, 6 and 7.

Figure 2. As frequency increases, the capacitive reac- apply - See KEMET SPICE models for such instances. voltage at 125°C. (Except 85°C for Z5U, Y5V & X5R).

1. Resistance to Soldering Heat:

onds) no leaching of nickel barrier. EIA-198, Method 303, Condition D .

1. A well constructed multilayer ceramic capacitor chip is

mounting on the board, or during subsequent testing. low, failure rate when operated within rated conditions. with a periodic sampling program for selected values. within 1.5 years of receipt.

1. Ceramic capacitors, like any other capacitors, may fail if

or rework cycles that may also introduce thermal shock. tor is damaged by misapplication, the circuit may fail.

1. Detailed application information can be found in KEMET

*Note: 150% of rated voltage for selected high capacitance X5R values. Please contact factory. See Table 4 on page 71 for limits. See Table 4 on page 71 for limits. See Table 4 on page 71 for limits.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS Ceramic Surface Mount C 0805 C 103 K 5 R A C* CERAMIC SIZE CODE SPECIFICATION C - Standard CAPACITANCE CODE Expressed in Picofarads (pF) First two digits represent significant figures. Third digit specifies number of zeros. (Use 9 (Example: 2.2pF = 229 or 0.50 pF = 508) CAPACITANCE TOLERANCE F – ±1% P – (GMV) – special order only DIMENSIONS—MILLIMETERS AND (INCHES) CAPACITOR ORDERING INFORMATION

• C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics
• 10, 16, 25, 50, 100 and 200 Volts
• Standard End Metalization: Tin-plate over nickel barrier
• Available Capacitance Tolerances: ±0.10 pF; ±0.25 +80%-20%
• Tape and reel packaging per EIA481-1. (See page 92 for specific tape and reel information.) Bulk Cassette packaging (0402, 0603, 0805 only) per IEC60286-6 and EIAJ 7201.
• RoHS Compliant

CAPACITOR OUTLINE DRAWINGS END METALLIZATION C-Standard (Tin-plated nickel barrier) FAILURE RATE LEVEL A- Not Applicable TEMPERATURE CHARACTERISTIC Designated by Capacitance Change Over Temperature Range G – C0G (NP0) (±30 PPM/°C) VOLTAGE 1 - 100V 3 - 25V 2 - 200V 4 - 16V 5 - 50V 8 - 10V W L T B S TIN PLATE NICKEL PLATE CONDUCTIVE MET ALLIZA TION ELECTRODES * Part Number Example: C0805C103K5RAC (14 digits - no spaces) or Solder Reflow METRIC SIZE CODE (Ref only) 1005 1608 2012 3216 3225 4532 4564 5650 5664 EIA SIZE CODE 0402* 0603* 0805* 1206* 1210* 1812 1825* 2220 2225 (Standard Chips - For Military see page 87) 9 - 6.3V7 - 4V EIA SIZE CODE METRIC SIZE CODE L - LENGTH W - WIDTH T THICKNESS B - BANDWIDTH S SEPARATION minimum MOUNTING TECHNIQUE * Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk bassette, see page 96.) + For extended value 1210 case size - solder reflow only. Solder Wave + or Solder Reflow Solder Reflow See page 78 for thickness dimensions. Solder Reflow

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 * Indicates EIA preferred chip sizes. NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. 50 Volt Ceramic Chips can be used in 63 volt applications. Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET’s option. Reels with such substitutions will be marked with the improved KEMET part numbers. CERAMIC CHIP/STANDARD C0G CAPACITANCE RANGE –0201, 0402, 0603, 0805, 1206 See page 78 for Thickness Code Reference Chart.

• Greater or equal to J (5%) tolerance available. • J Tolerance Only; ^ = D Tolerance Only ~ = J,K,M Tolerance Only Ceramic Surface Mount C0201* 25V 10V 16V 25V 50V 10V 16V 25V 50V 100V 200V 10V 16V 25V 50V 100V 200V 10V 16V 25V 50V 100V 200V 0.50 508 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC 0.75 758 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC 1.0 109 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 1.1 119 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 1.2 129 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 1.5 159 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 1.6 169 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 1.8 189 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 2.0 209 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 2.2 229 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 2.4 249 C,D BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 2.7 279 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 3.0 309 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 3.3 339 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 3.9 399 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 4.3 439 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 4.7 479 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 5.1 519 C,D K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 5.6 569 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 6.0 609 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 6.2 629 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 6.8 689 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 7.0 709 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 7.5 759 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 8.2 829 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 9.1 919 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 10.0 100 C,D J,K,M AA^ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 11.0 110 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 12.0 120 C,D J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 13.0 130 C,D J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 15.0 150 C,D G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 16.0 160 C,D G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 18.0 180 C,D G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 20.0 200 C,D G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 22.0 220 C,D G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 24.0 240 C,D G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 27.0 270 D,F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 30.0 300 D,F,G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 33.0 330 D,F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 36.0 360 D,F,G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 39.0 390 D,F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 43.0 430 D,F,G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 47.0 470 D,F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 51.0 510 D,F,G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 56.0 560 F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 62.0 620 F,G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 68.0 680 F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 75.0 750 F,G,J,K,M BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 82.0 820 F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 91.0 910 F,G,J,K,M BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 100.0 101 F,G,J,K,M AA~ BB BB BB BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 110.0 111 F,G,J,K,M CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 120.0 121 F,G,J,K,M BB• CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 130.0 131 F,G,J,K,M CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 150.0 151 F,G,J,K,M BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 160.0 161 F,G,J,K,M CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 180.0 181 F,G,J,K,M BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 200.0 201 F,G,J,K,M CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 220.0 221 F,G,J,K,M BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 240.0 241 F,G,J,K,M CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 270.0 271 F,G,J,K,M BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 300.0 301 F,G,J,K,M CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 330.0 331 F,G,J,K,M BB CB CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 360.0 361 F,G,J,K,M CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 390.0 391 F,G,J,K,M CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 430.0 431 F,G,J,K,M CB CB CB CB DC DC DC DC DC DC EB EB EB EB EB EB 470.0 471 F,G,J,K,M BB CB CB CB CB DC DC DC DC DC DD EB EB EB EB EB EB 510.0 511 F,G,J,K,M CB CB CB CB DC DC DC DC DC EB EB EB EB EB EB 560.0 561 F,G,J,K,M BB CB CB CB CC DC DC DC DC DC EB EB EB EB EB EB 620.0 621 F,G,J,K,M CB CB CB CC DC DC DC DC DC EB EB EB EB EB EC 680.0 681 F,G,J,K,M BB CB CB CB CC DC DC DC DC DC EB EB EB EB EB EC 750.0 751 F,G,J,K,M CB CB CB CC DC DC DC DC DC EB EB EB EB EB EC 820.0 821 F,G,J,K,M BB CB CB CB CC DC DC DC DC DC EB EB EB EB EB EC 910.0 911 F,G,J,K,M CB CB CB CC DC DC DC DC DD EB EB EB EB EB ED 1000. 0 102 F,G,J,K,M BB CB CB CB CC DC DC DC DC DD EB EB EB EB EB EE 1100.0 112 F,G,J,K,M DC DC DC DC EB EB EB EB EB EB 1200.0 122 F,G,J,K,M DC DC DC DC EB EB EB EB EB EB 1300.0 132 F,G,J,K,M DD DD DD DD EB EB EB EB EC EC 1500.0 152 F,G,J,K,M DD DD DD DD EB EB EB EB ED EC 1600.0 162 F,G,J,K,M DD DD DD DD EB EB EB EB ED ED 1800.0 182 F,G,J,K,M DD DD DD DD EB EB EB EB ED ED 2000.0 202 F,G,J,K,M DC DC DC EB EB EB EB ED 2200.0 222 F,G,J,K,M CC DC DC DC EB EB EB EB EE 2400.0 242 F,G,J,K,M DC DC DC EB EB EB EB EC 2700.0 272 F,G,J,K,M CC DC DC DC EB EB EB EB EC 3000.0 302 F,G,J,K,M DD DD DD EC EC EC EC EC 3300.0 332 F,G,J,K,M CC DD DD DD EC EC EC EC EE 3600.0 362 F,G,J,K,M DD DD DD EC EC EC EC EE 3900.0 392 F,G,J,K,M CC DE DE DE EC EC EC EC EF 4300.0 432 F,G,J,K,M EC EC EC EC 4700.0 472 F,G,J,K,M CC DC EC EC EC EC 5100.0 512 F,G,J,K,M ED ED ED ED 5600.0 562 F,G,J,K,M CC DC ED ED ED ED 6200.0 622 F,G,J,K,M EB EB EB 6800.0 682 F,G,J,K,M CC DC EB EB EB 7500.0 752 F,G,J,K,M EB EB EB 8200.0 822 F,G,J,K,M CC DC EC EC EC 9100.0 912 F,G,J,K,M EC EC EC 10,000.0 103 F,G,J,K,M CC DC ED ED ED 18,000.0 183 F,G,J,K,M DC EB 22,000.0 223 F,G,J,K,M DD EB 33,000.0 333 F,G,J,K,M DJ EB 47,000.0 473 F,G,J,K,M EC 68,000.0 683 F,G,J,K,M EF 100,000.0 104 F,G,J,K,M EH C0603* C1206* C0805*Cap pF Cap Code Cap Tolerance C0402*

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP/STANDARD FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FF FB FB FC FF FG FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FC FC FF FF FF FF FG FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FE FE FG FC FF 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 CAP. PF 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 CAP CODE CAP. TOL. C C C C C D D D D F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F G G G J J C0G CAPACITANCE RANGE – 1210, 1812, 1825, 2220, 2225 X7R CAPACITANCE RANGE – 0402, 0603, 0805, 1206 * Capacitance K or M. ontact KEMET Sales Rep for J tolerance availability. +_ Reflow Only. NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. # X7R dielectric - Extended Range Values - Cap and DF measured @ 0.5 Vrms.See page 63 for Thickness Code Reference Chart. Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option. Reels with such substitutions will be marked with the improved KEMET part numbers. See page 78 for Thickness Code Reference Chart. 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V 150 151 K,M,J BB BB BB BB BB 180 181 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB 220 221 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 270 271 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 330 331 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 390 391 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 470 471 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 560 561 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 680 681 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 820 821 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC 1,000 102 K,M,J BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC EB EB EB EB EB EB EB 1,200 122 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 1,500 152 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 1,800 182 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 2,200 222 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 2,700 272 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 3,300 332 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 3,900 392 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 4,700 472 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 5,600 562 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 6,800 682 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 8,200 822 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 10,00 0 103 K,M,J BB BB BB BB BB CB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 12,000 123 K,M,J BB BB BB CB CB CB CB CB CC DC DC DC DC DC DC DC EB EB EB EB EB EB EB 15,000 153 K,M,J BB BB BB CB CB CB CB CB CC DC DC DC DC DC DD DC EB EB EB EB EB EB EB 18,000 183 K,M,J BB BB BB CB CB CB CB CB CC DC DC DC DC DC DD DC EB EB EB EB EB EB EB 22,000 223 K,M,J BB BB BB BB* BB* CB CB CB CB CB CC DC DC DC DC DC DD DC EB EB EB EB EB EB EB 27,000 273 K,M,J BB BB BB CB CB CB CB CB CC DC DC DC DC DC DD DE EB EB EB EB EB EB EB 33,000 333 K,M,J BB BB BB CB CB CB CB CB CC DC DC DC DC DC DD DE EB EB EB EB EB EB EB 39,000 393 K,M,J BB BB BB CB CB CB CB CB CC DC DC DC DC DC DD DE EB EB EB EB EB EC EB 47,000 473 K,M,J BB BB BB BB* CB CB CB CB CB CB DC DC DC DC DC DE DG EB EB EB EB EB EC ED 56,000 563 K,M,J BB BB BB CB CB CB CB CC DD DD DD DD DD DE DG EB EB EB EB EB EB ED 68,000 683 K,M,J BB BB BB CB CB CB CB CC DD DD DD DD DD DE EB EB EB EB EB EB ED 82,000 823 K,M,J BB BB BB CB CB CB CB CC DD DD DD DD DD DE EB EB EB EB EB EB ED 100,000 104 K,M,J BB BB BB CB CB CB CB CC DD DD DD DD DD DE EB EB EB EB EB EB EM 120,000 124 K,M,J CB CB CB DC DC DC DC DD DG EC EC EC EC EC EC EM 150,000 154 K,M,J CB CB CB CD* DC DC DC DC DD EC EC EC EC EC EC EG 180,000 184 K,M,J CB CB CB DC DC DC DC DD EC EC EC EC EC EC 220,000 224 K,M,J CB CB CB CD* DC DC DC DC DD DG EC EC EC EC EC EC 270,000 274 K,M,J CB CB CB DD DD DD DD EB EB EB EB EC EM 330,000 334 K,M,J CB CB CB DE DE DE DE EB EB EB EB EC EG 390,000 394 K,M,J CB CB CB DG DG DG DG EB EB EB EB EG EG 470,000 474 K,M,J CB CB CB DG DG DG DG DE* EC EC EC EC EC EG 560,000 564 K,M,J DG DG DG DG ED ED ED ED EC 680,000 684 K,M,J DG DG DG DJ* EE EE EE EE ED 820,000 824 K,M,J* DG DG DG EF EF EF EF 1,000,000 105 K,M,J** CD CD CD* DG DG DG DJ* EE EE EF EG ED* 1,200,000 125 K,M,J DE DE DE ED ED ED EG 1,500,000 155 K,M,J DG DG DG EF EF EF EG 1,800,000 185 K,M,J DG DG DG EF EF EF 2,200,000 225 K,M,J DG DG DG EG EG EG EF* EH*+ 2,700,000 275 K,M,J EN EN EK 3,300,000 335 K,M,J ED ED ED 3,900,000 395 K,M,J EL EL EL 4,700,000 475 K,M,J EM*+ EM*+ EM*+ EH*+ 5,600,000 565 K,M,J** EH*+ EH*+ EH*+ 6,800,000 685 K,M,J** EH*+ EH*+ EH*+ 8,200,000 825 K,M,J** EH*+ EH*+ EH*+ C0603 C1206C0805Cap pF Cap Code Cap Tolerance C0402 25V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V 10.0 100 D J,K,M FB FB FB 12.0 120 D J,K,M FB FB FB 15.0 150 D G,J,K,M FB FB FB 18.0 180 D G,J,K,M FB FB FB 22.0 220 D G,J,K,M FB FB FB 27.0 270 D,F,G,J,K,M FB FB FB 33.0 330 D,F,G,J,K,M FB FB FB 39.0 390 D,F,G,J,K,M FB FB FB 47.0 470 D,F,G,J,K,M FB FB FB 56.0 560 F,G,J,K, M FB FB FB 68.0 680 F,G,J,K, M FB FB FB 82.0 820 F,G,J,K, M FB FB FB 100.0 101 F,G,J,K, M FB FB FB 120.0 121 F,G,J,K, M FB FB FB 150.0 151 F,G,J,K, M FB FB FB 180.0 181 F,G,J,K, M FB FB FB 220.0 221 F,G,J,K, M FB FB FB 270.0 271 F,G,J,K, M FB FB FB 330.0 331 F,G,J,K, M FB FB FB 390.0 391 F,G,J,K, M FB FB FB 470.0 471 F,G,J,K, M FB FB FB GB GB GB 560.0 561 F,G,J,K, M FB FB FB GB GB GB 680.0 681 F,G,J,K, M FB FB FB GB GB GB 820.0 821 F,G,J,K, M FB FB FB GB GB GB 1,000.0 102 F,G,J,K, M FB FB FB GB GB GB 1,200.0 122 F,G,J,K, M FB FB FB GB GB GB 1,500.0 152 F,G,J,K, M FB FB FE GB GB GB 1,800.0 182 F,G,J,K, M FB FB FE GB GB GB 2,200.0 222 F,G,J,K, M FB FC FG GB GB GB 2,700.0 272 F,G,J,K, M FB FC FC GB GB GB 3,300.0 332 F,G,J,K, M FB FF FF GB GB GB 3,900.0 392 F,G,J,K, M FB FF GB GB GB HB HB HB 4,700.0 472 F,G,J,K, M FF FG GB GB GD HB HB HB KB KB KB 5,600.0 562 F,G,J,K, M FB FG GB GB GH HB HB HB KB KB KB 6,800.0 682 F,G,J,K, M FB FG GB GB GJ HB HB HB JB JB KB KB KB 8,200.0 822 F,G,J,K, M FC GB GB HB HB HB JB JB KB KB KB 10,000.0 103 F,G,J,K, M FF GB GH HB HB HE JB JB KB KB KB 12,000.0 123 F,G,J,K, M FG GB GG HB HB HE JB JB KB KB KB 15,000.0 153 F,G,J,K, M HB HB JB JB KB KB KE 18,000.0 183 F,G,J,K, M HB HB JB JB KB KB 22,000.0 223 F,G,J,K, M FB HB HE JB KB KB 27,000.0 273 F,G,J,K, M FB HB HE JB KB KB 33,000.0 333 F,G,J,K, M FB KB 47,000.0 473 F,G,J,K, M FB 68,000.0 683 F,G,J,K, M FB 100,000.0 104 F,G,J,K, M FE 220,000.0 224 F,G,J,K, M FK+ C1812* C1825* C2220 C2225C1210*Cap pF Cap Code Cap Tolerance

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 * Capacitance tolerance K or M. Contact your local KEMET Sales Rep for J tolerance availablity. + Reflow Only NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. 50 Volt Ceramic Chips can be used for 63 volt applications. # Extended Range Values – Cap and DF measured @ 0.5 Vrms. Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option. Reels with such substitutions will be marked with the improved KEMET part numbers. CERAMIC CHIP/STANDARD X7R CAPACITANCE RANGE – 1210, 1812, 1825, 2220, 2225 NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. 50 Volt Ceramic Chips can be used for 63 volt applications. * EIA preferred chip sizes + Reflow only See page 78 for Thickness Code Reference Chart Y5V CAPACITANCE RANGE 22,000 223 Z DC EB 33,000 333 Z DC EB 47,000 473 Z BB BB BB DD EB 68,000 683 Z BB BB BB DD EB 100,000 104 Z BB BB BB CB CB CB CB DD EB 150,000 1 5 4 Z C B C BC BC B D CD CD CD C E C 220,000 224 Z CB CB CB CB DC DC DC DC EC FD+ FD+ 330,000 334 Z CB CB CB CB DC DC DC DC EB FD+ FD+ 470,000 474 Z CC CC DC DC DC DC EC FD+ FD+ 680,000 684 Z CC CC DE DE DE DE EB FD+ FD+ 1,000,000 105 Z CC CC DG DG DG DG EG EG EG EG FH+ FH+ 1,500,000 155 Z DG DG DG EC EC EC FD+ 2,200,000 225 Z DG DG DG ED ED ED FD+ 3,300,000 335 Z DE DE EF EF EF FE+ 4,700,000 475 Z DG DG EJ EJ EM FG+ FG+ FG+ 6,800,000 685 Z EJ EJ FH+ FH+ FH+ 10,000,000 106 Z DH EJ EH FH+ FH+ FP+ 15,000,000 156 Z FD+ FD+ 22,000,000 226 Z EH FT+ FT+ Cap pF Cap Code Cap Tol. C0402* C1210*C0603* C1206* C0805* Ceramic Surface Mount 6.3V 10V 16V 25V 50V 100V 200V 25V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V 2,200 222 K,M,J FB FB FB FB FB FB FB 2,700 272 K,M,J FBF B FB FB FB FBF B 3,300 332 K,M,J FBF B FB FB FB FBF B 3,900 392 K,M,J FBF B FB FB FB FBF B 4,700 472 K,M,J FBF B FB FB FB FBF B 5,600 562 K,M,J FBF B FB FB FB FBF B 6,800 682 K,M,J FBF B FB FB FB FBF B GB GB GB GB 8,200 822 K,M,J FBF B FB FB FB FBF B GB GB GB GB 10,000 103 K,M,J FBF B FB FB FB FBF B GB GB GB GB 12,000 123 K,M,J FBF B FB FB FB FBF B GB GB GB GB 15,000 153 K,M,J FBF B FB FB FB FBF B GB GB GB GB 18,000 183 K,M,J FBF B FB FB FB FBF B GB GB GB GB 22,000 223 K,M,J FBF B FB FB FB FBF B GB GB GB GB HB HB HB 27,000 273 K,M,J FBF B FB FB FB FBF B GB GB GB GB HB HB HB 33,000 333 K,M,J FBF B FB FB FB FBF B GB GB GB GB HB HB HB 39,000 393 K,M,J FBF B FB FB FB FBF B GB GB GB GB HB HB HB 47,000 473 K,M,JF B FB FBF B FB FB FC GB GB GB GB HB HB HB KC KC KC 56,000 563 K,M,JF B FB FBF B FB FB FC GB GB GB GB HB HB HB KC KC KC 68,000 683 K,M,JF B FB FBF B FB FB FC GB GB GB GB HB HB HB KC KC KC 82,000 823 K,M,JF B FB FBF B FC FC FF GB GB GB GB HB HB HB KC KC KC 100,000 104 K,M,JF B FB FBF B FB FD FG GB GB GB GB HB HB HB KC KC KC 120,000 124 K,M,JF B FB FBF B FB FD GB GB GB GB HB HB HB KC KC KC 150,000 154 K,M,J FC FC FCF C FCF D GB GB GB GE HB HB HB KCK C KC 180,000 184 K,M,J FC FC FCF C FCF D GB GB GB GG HB HB HB KCK C KC 220,000 224 K,M,J FC FC FCF C FCF D GB GB GB HB HB HB KCK C KC 270,000 274 K,M,J FC FC FCF C FCF D GB GB GH HB HB HB JC JC JC KB KC KC 330,000 334 K,M,J FD FD FDF D FDF D GB GB GH HB HB HB JC JC JC KB KC KC 390,000 394 K,M,JF D FD FD FD FD GB GB GG HB HB HD JC JC JC KB KC KC 470,000 474 K,M,J FD FD FDF D FDF D GB GB GG HB HB JC JC KB KC KD 560,000 564 K,M,JF D FD FD FD FD GC GC GG HB HD JC JC KB KC 680,000 684 K,M,JF D FD FD FD FD GC GC GG HB HD JC JD KB KC 820,000 824 K,M,JF F FF FF FF FF GE GE GG HB JC JF KB KC 1,000,000 105 K,M,JF H FH FH FH FH FM GE GE GG HB JC KB KD 1,200,000 125 K,M,JF H FH FH FH HB JC KB 1,500,000 155 K,M,JF H FH FH FH HB JC KC 1,800,000 185 K,M,JF H FH FH FH HD JD KD 2,200,000 225 K,M,J FJ FG*+ HF JF KD 2,270,000 275 K,M,J 3,300,000 335 K,M,J FM*+ 3,900,000 395 K,M,J 4,700,000 475 K,M,J FC*+ FC*+ FC*+ FG*+ FS*+ GK+ GK+ 5,600,000 565 K,M,J 6,800,000 685 K,M,J FM+ 8,200,000 825 K,M,J 10,000,000 106 K,M,J FH*+ FH*+ FH*+ FS+ GK+ 12,000,000 126 K,M,J 15,000,000 156 K,M,J 18,000,000 186 K,M,J 22,000,000 226 K,M,J Cap pF Cap Code Cap Tol. C1210* C1825* C2220 C2225C1812*

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP/STANDARD Ceramic Surface Mount X5R CAPACITANCE RANGE NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. 50 Volt Ceramic Chips can be used for 63 volt applications. * EIA preferred chip sizes C0805* C1206* C1210* C1812* C1825* C2225 100V50V 100V 50V 100V 50V KC KC KC 100V100V50V100V50V100V DC DC DC DC DC DC DC DC DC DD DD DD DD DD DD 50V M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z M,Z CAP TOL 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 CAP CODE 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1,000,000 1,200,000 1,500,000 1,800,000 2,200,000 CAP. PF DC DC DC EB EB EB EB EB EB EB EB EB EB EB EB EB EC EC EC EC EB EB EB EB EB EB EB EC EC EB EB EB EB FB FB FB FB FB FB FC FC FC FC FD FD FD FD FD FF FH FB FB FB FC FD FD FD GB GB GB GB GB GB GB GB GB GB GC GC GE GE GB GB GB GB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HD KB KB KB KB KB KB KB KB KC KD KD M,Z2752,700,000 KD Z5U CAPACITANCE RANGE (KEMET's Z5U also meets Y5V Characteristics) 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 50V 100V 6,800 682 M,Z DC DC 8,200 822 M,Z DC DC 10,000 103 M,Z DC DC EB EB 12,000 123 M,Z DC EB EB 15,000 153 M,Z DC EB EB 18,000 183 M,Z DC EB EB 22,000 223 M,Z DC EB EB 27,000 273 M,Z DC EB EB 33,000 333 M,Z DC EB EB 39,000 393 M,Z DD EB EC 47,000 473 M,Z DD EB EC FB FB 56,000 563 M,Z DD EB EB FB FB 68,000 683 M,Z DD EB EB FB FB 82,000 823 M,Z DD EB EB FB FC GB GB 100,000 104 M,Z DD EB EB FB FD GB GB 120,000 124 M,Z EC FB FD GB GB 150,000 154 M,Z EC FC FD GB GB 180,000 184 M,Z EC FC GB HB HB 220,000 224 M,Z EC FC GB HB HB 270,000 274 M,Z FC GB HB HB 330,000 334 M,Z FD GB HB HB KB KC 390,000 394 M,Z FD GB HB HD KB KC 470,000 474 M,Z FD GB HB KB KC 560,000 564 M,Z FD GC HB KB 680,000 684 M,Z FD GC HB KB 820,000 824 M,Z FF GE HB KB 1,000,000 105 M,Z FH GE HB KB 1,200,000 125 M,Z HB KB 1,500,000 155 M,Z HB KC 1,800,000 185 M,Z HB KD 2,200,000 225 M,Z HB KD 2,700,000 275 M,Z KD C1825* C2225Cap pF Cap Code Cap Tol. C0805* C1206* C1210* C1812* See page 78 for Thickness Code Reference Chart. NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative. +Reflow only ° Available M ±20% tolerance only Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option. Reels with such substitutions will be marked with the improved KEMET part numbers. 10,000 103 K ,M AA~ 12,000 123 K ,MB B B B B B 15,000 153 K ,MB B B B B B 18,000 183 K ,MB B B B B B 22,000 223 K ,MB B B B B B 27,000 273 K ,MB B B B B B 33,000 333 K ,MB B B B B B 39,000 393 K ,MB B B B B B 47,000 473 K ,MB B B B B B 56,000 563 K ,MB B B B B B 68,000 683 K ,MB B B B B B 82,000 823 K ,MB B B B B B 100,000 104 K ,M AA~ BB BB BB 120,000 124 K ,M 150,000 154 K ,M 180,000 184 K ,M 220,000 224 K ,MB B 270,000 274 K ,MC C C C C C E B 330,000 334 K ,MC C C C C C E B 390,000 394 K ,MC C C C C C E B 470,000 474 K ,MC C C C C C D C E C 560,000 564 K ,MC C C C C C D D E D 680,000 684 K ,MC C C C C C D E E E 820,000 824 K ,MC C C C C C D F E F 1,000,000 105 K ,M BB BB CC CC CC CD DG DG DG DG EH FH+ FH+ FH+ 1,200,000 125 K ,M DD DD DD EC FD+ FD+ 1,500,000 155 K ,M DE DE DE EC EC EC EC FD+ FD+ 1,800,000 185 K ,M DH DH DH EC EC EC EC FD+ FD+ 2,200,000 225 K ,M BB° CC+ CC+ CC+ DD DG DD EE EE EE EE FG+ FG+ 2,700,000 275 K ,M EF EF EF EF FG+ FG+ 3,300,000 335 K ,M DE DE DH EH EH EH EH FH+ FH+ 4,700,000 475 K ,M CD+ DH DH DH EH EH EH EH FK+ FK+ FK+ FK+ 5,600,000 565 K ,M 6,800,000 685 K ,M ED ED EH FJ+ FJ+ FJ+ FF+ 8,200,000 825 K ,M ED ED EH FK+ FK+ FK+ FG+ 10,000,000 106 K ,M CD°+ DJ+ DJ+ DK+ EH EH EH EH+ FK+ FK+ FK+ FH+ 12,000,000 126 K ,M FD+ FD+ FG+ 15,000,000 156 K ,M FD+ FD+ FL+ 18,000,000 186 K ,M FL+ FL+ FH+ 22,000,000 226 K ,M DH°+ EH+ FH+ FH+ FJ+ 27,000,000 276 K ,M 33,000,000 336 K ,M 39,000,000 396 K ,M 100,000,000 107 K ,M EH°+ FQ°+ C1206* C1210*C0402* C0805*Cap pF Cap Code Cap Tolerance C0603*0201

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP/CAPACITORS Tin Lead L Termination C 0805 C 103 K 5 R A L* CERAMIC SIZE CODE SPECIFICATION C - Standard CAPACITANCE CODE Expressed in Picofarads (pF) First two digits represent significant figures. Third digit specifies number of zeros. (Use 9 (Example: 2.2pF = 229 or 0.50 pF = 508) CAPACITANCE TOLERANCE F – ±1% G – ±2% L # W # B S MOUNTING LENGTH WIDTH BANDWIDTH MIN. SEPARATION TECHNIQUE DIMENSIONS—MILLIMETERS AND (INCHES) CAPACITOR ORDERING INFORMATION CAPACITOR OUTLINE DRAWINGS END METALLIZATION L - SnPb plated nickel barrier (SnPb 5% minimum) FAILURE RATE LEVEL A- Not Applicable TEMPERATURE CHARACTERISTIC Designated by Capacitance Change Over Temperature Range G – C0G (NP0) (±30 PPM/°C) VOLTAGE 1 - 100V 3 - 25V 2 - 200V 4 - 16V 5 - 50V 8 - 10V 9 - 6.3V * Part Number Example: C0805C103K5RAL (14 digits - no spaces) * Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk cassette, see page 96.) † For extended value 1210 case size – solder reflow only. or Solder Reflow METRIC SIZE CODE (Ref only) 1005 1608 2012 3216 3225 4532 4564 5650 5664 EIA SIZE CODE 0402* 0603* 0805* 1206* 1210* 1812 1825* 2220 2225 (Standard Chips - For Military see page 87) See page 78 for thickness dimensions. KEMET’s line of Tin/Lead termination commercial MLCC surface mount capacitors are designed to meet the needs of the commercial, high reliability, and military customer applications where Tin/Lead plating is required. KEMET’s Tin/Lead elec- troplating process is designed to meet a 5% minimum lead content in the termination of the component. As the bulk of the electronics industry marches to RoHS compliance it is important that KEMET provide the Tin/Lead terminated products for our valued high reliability and military customers. KEMET Tiin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard capacitance values in X7R, X5R, C0G dielectrics. Voltage ratings range from 6.3V to 200V. To order the Tin/Lead termina- tions indicate an “L” in the 14 th digit of the part number. For additional dielectrics and voltage ratings please contact the fac- tory or local Sales personnel. Refer to pages 73-76 for NP0/C0G, X7R and X5R dielectric capacitance ranges available. /MT87 /MT76 /MT66 /MT83 /MT84 /MT67/MT79/MT78/MT68/MT85/MT67/MT84/MT73/MT86/MT69/MT32/MT77/MT69/MT84/MT65/MT76/MT76/MT73/MT90/MT65/MT84/MT73/MT79/MT78/MT69/MT76/MT69/MT67/MT84/MT82/MT79/MT68/MT69/MT83 Sn/Pb /MT80/MT76/MT65/MT84/MT69 /MT78/MT73/MT67/MT75/MT69/MT76/MT32/MT80/MT76/MT65/MT84/MT69 KEMET Tin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard capacitance values in X7R and C0G dielectrics. Voltage ratings range from 6.3V to 200V. To order the Tin/Lead terminations indicate an “L” in the 14th digit of the part number. To request the L Series termination for other surface mount product lines (Open Mode, High Voltage, Arrays, etc.) or for additional dielectrics and higher voltage ratings, please contact the factory or local Sales representative. Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS This chart refers to ceramic chip thickness codes on pages 73-76. Thickness Code Reference Chart Packaging Quantity Based on Finished Chip Thickness Specifications Thickness Code Chip Size Chip Thickness Range (mm) Qty per Reel 7" Plastic Qty per Reel 13" Plastic Qty per Reel 7" Paper Qty per Reel 13" Paper Qty per Bulk Cassette AA 0201 .30 ± .03 N/A N/A 15,000 N/A N/A BB 0402 .50 ± .05 N/A N/A 10,000 50,000 50,000 CB 0603 .80 ± .07 N/A N/A 4,000 10,000 15,000 CC 0603 .80 ± .10 N/A N/A 4,000 10,000 N/A CD 0603 .80 ± .15 N/A N/A 4,000 10,000 N/A DB 0805 .60 ± .10 N/A N/A N/A N/A 10,000 DC 0805 .78 ± .10 4,000 10,000 4,000 10,000 N/A DD 0805 .90 ± .10 4,000 10,000 N/A N/A N/A DE 0805 1.00 ± .10 2,500 10,000 N/A N/A N/A DF 0805 1.10 ± .10 2,500 10,000 N/A N/A N/A DG 0805 1.25 ± .15 2,500 10,000 N/A N/A N/A DH 0805 1.25 ± .20 2,500 10,000 N/A N/A N/A DJ 0805 1.25 ± .20 3,000 10,000 N/A N/A N/A DK 0805 1.25 ± .15 3,000 10,000 N/A N/A N/A EB 1206 .78 ± .10 4,000 10,000 4,000 10,000 N/A EC 1206 .90 ± .10 4,000 10,000 N/A N/A N/A ED 1206 1.00 ± .10 2,500 10,000 N/A N/A N/A EE 1206 1.10 ± .10 2,500 10,000 N/A N/A N/A EF 1206 1.20 ± .15 2,500 10,000 N/A N/A N/A EG 1206 1.60 ± .15 2,000 8,000 N/A N/A N/A EH 1206 1.60 ± .20 2,000 8,000 N/A N/A N/A EJ 1206 1.70 ± .20 2,000 8,000 N/A N/A N/A EK 1206 .80 ± .10 2,000 8,000 N/A N/A N/A EL 1206 1.15 ± .15 2,000 8,000 N/A N/A N/A EM 1206 1.25 ± .15 2,500 10,000 N/A N/A N/A EN 1206 0.95 ± .10 4,000 10,000 N/A N/A N/A FB 1210 .78 ± .10 4,000 10,000 N/A N/A N/A FC 1210 .90 ± .10 4,000 10,000 N/A N/A N/A FD 1210 .95 ± .10 4,000 10,000 N/A N/A N/A FE 1210 1.00 ± .10 2,500 10,000 N/A N/A N/A FF 1210 1.10 ± .10 2,500 10,000 N/A N/A N/A FG 1210 1.25 ± .15 2,500 10,000 N/A N/A N/A FH 1210 1.55 ± .15 2,000 8,000 N/A N/A N/A FJ 1210 1.85 ± .20 2,000 8,000 N/A N/A N/A FK 1210 2.10 ± .20 2,000 8,000 N/A N/A N/A FL 1210 1.40 ± .15 2,000 8,000 N/A N/A N/A FM 1210 1.70 ± .20 2,000 8,000 N/A N/A N/A FN 1210 1.85 ± .20 2,000 8,000 N/A N/A N/A FO 1210 1.50 ± .20 2,000 8,000 N/A N/A N/A FP 1210 1.60 ± .20 2,000 8,000 N/A N/A N/A FQ 1210 2.5 ± .20 1,500 8,000 N/A N/A N/A FR 1210 2.25 ± .20 2,000 8,000 N/A N/A N/A FS 1210 2.50 ± .20 1,000 4,000 N/A N/A N/A GB 1812 1.00 ± .10 1,000 4,000 N/A N/A N/A GC 1812 1.10 ± .10 1,000 4,000 N/A N/A N/A GD 1812 1.25 ± .15 1,000 4,000 N/A N/A N/A GE 1812 1.30 ± .10 1,000 4,000 N/A N/A N/A GF 1812 1.50 ± .10 1,000 4,000 N/A N/A N/A GG 1812 1.55 ± .10 1,000 4,000 N/A N/A N/A GH 1812 1.40 ± .15 1,000 4,000 N/A N/A N/A GJ 1812 1.70 ± .15 1,000 4,000 N/A N/A N/A GK 1812 1.60 ± .20 1,000 4,000 N/A N/A N/A GL 1812 1.90 ± .20 1,000 4,000 N/A N/A N/A GM 1812 2.00 ± .20 1,000 4,000 N/A N/A N/A GN 1812 1.70 ± .20 1,000 4,000 N/A N/A N/A HB 1825 1.10 ± .15 1,000 4,000 N/A N/A N/A HC 1825 1.15 ± .15 1,000 4,000 N/A N/A N/A HD 1825 1.30 ± .15 1,000 4,000 N/A N/A N/A HE 1825 1.40 ± .15 1,000 4,000 N/A N/A N/A HF 1825 1.50 ± .15 1,000 4,000 N/A N/A N/A JB 2220 1.00 ± .15 1,000 4,000 N/A N/A N/A JC 2220 1.10 ± .15 1,000 4,000 N/A N/A N/A JD 2220 1.30 ± .15 1,000 4,000 N/A N/A N/A JE 2220 1.40 ± .15 1,000 4,000 N/A N/A N/A JF 2220 1.50 ± .15 1,000 4,000 N/A N/A N/A KB 2225 1.00 ± .15 1,000 4,000 N/A N/A N/A KC 2225 1.10 ± .15 1,000 4,000 N/A N/A N/A KD 2225 1.30 ± .15 1,000 4,000 N/A N/A N/A KE 2225 1.40 ± .15 1,000 4,000 N/A N/A N/A

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC OPEN MODE CAPACITORS Applications: Markets:

• Input side filtering (power plane/bus) • Automotive
• High current applications (battery line) - All applications connected directly to the battery
• Circuits that cannot be fused to open when - Conversion to 42V power system
• Power Conversion - Raw power input side filtering short circuits occur due to flex cracks Metric EIASize Size Code Code L- Length W - Width B - Bandwidth Separation Note: For thickness dimensions, see Table 2. C 1812 F 105 K 1 R A C Style C - Ceramic Size Code 0805, 1206, 1210, 1812 Specification F - Open-Mode Capacitance Code, pF First two digits represent significant figures. Third digit specifies number of zeros. 100 pF = 101. (Use “9” for 1.0 through 9.9 pF) (Use “8” for 0.1 through .99 pF) Capacitance Tolerance K = ±10% M = ±20% Voltage 2 = 200V 5 = 50V 1 = 100V 3 = 25V 4 = 16V Temperature Characteristic Designated by Capacitance Change over Temperature Range End Metallization C = Standard Failure Rate Level A= Not Applicable The open-mode dimension (OM) exceeds the termination bandwidth dimensions: OM >BW

TABLE 1 - DIMENSIONS - MILLIMETERS (INCHES) CAPACITOR ORDERING INFORMATION OPEN-MODE INTERNAL DESIGN KEMET’s Open Mode Ceramic Surface Mount Capacitor is designed to significantly minimize the probability of a low IR or Short Circuit Condition when forced to failure in a board flex situation. This reduces the poten- tial for causing catastrophic failures. This product is RoHS Compliant. Metric Size Code EIA Size Code L - Length W - Width B - Bandwidth Separation W L T B S TIN PLATE NICKEL PLATE CONDUCTIVE MET ALLIZA TION ELECTRODES Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC OPEN MODE CAPACITORS TABLE 2 X7R DIELECTRIC CAPACITANCE RANGE AND THICKNESS TARGETS (mm) Ceramic Surface Mount THICKNESS AND PACKAGING INFORMATION 16V 25V 50V 100V 200V 16V 25V 50V 100V 200V 16V 25V 50V 100V 200V 25V 50V 100V 200V

102 DD DD DD DD DD

122 DD DD DD DD DD

152 DD DD DD DD DD

182 DD DD DD DD DD

222 DD DD DD DD DD

272 DD DD DD DD DD

332 DD DD DD DD DD

392 DD DD DD DD DD

472 DD DD DD DD DD

562 DD DD DD DD DD

682 DD DD DD DD DD

822 DD DD DD DD DD

103 DD DD DD DD DD

123 DD DD DD DD DG

153 DD DD DD DD DG

183 DD DD DD DD EC

223 DD DD DD DG EC

273 DD DD DD DG EC

333 DD DD DD DG EC

393 DD DD DD DG EC

473 DD DD DD DE EC EC EC EC EG GB

563 DD DD DD EC EC EC EC EG GB

683 DD DD DG DG EC EC EC EC EG FD GB

823 DD DD DG EC EC EC EC EG FD GB

104 DG DG DG EC EC EC EC EG FD FD FD FD FG GB GB GB GB

124 DG DG EC EC EC EC FD FD FD FD FG GB GB GB GB

154 DG DG EC EC EC EG FD FD FD FD FH GB GB GB GB

184 DG DG EC EC EC EG FD FD FD FD FH GB GB GB GB

224 DG DD DG EC EC EC ED FD FD FD FG FJ GB GB GB GC

274 EC EC EC FD FD FD FG GB GB GB GF

334 EG EG FD FD FD FH GB GB GB GK

394 EG EG FD FD FG FH GB GB GB GL

474 DE DG EG EG EC FD FD FG FJ GB GB GC

564 EG FD FD FG FR GB GB GD

684 DG EG FD FG FH FR GD GD GF

824 EG FD FG FJ GD GD GK

105 EG EC EH FD FH FJ FQ GN GN GM

225 EC EH FJ FM

475 EH FG FM

Code Series Dimension 7" Reel Qty. 13" Reel Qty. DD 0805 .90 ± .10 4000 10000 DE 0805 1.00 ± .10 2500 10000 DG 0805 1.25 ± .15 2500 10000 EC 1206 .90 ± .10 4000 10000 EG 1206 1.60 ± .15 2000 8000 EH 1206 1.60 ± .20 2000 8000 FD 1210 .95 ± .10 4000 10000 FG 1210 1.25 ± .15 2500 10000 FH 1210 1.55 ± .15 2000 8000 FJ 1210 1.85 ± .20 2000 8000 FM 1210 1.70 ± .20 2000 8000 FR 1210 2.25 ± .20 2000 8000 FQ 1210 2.5 ± .20 1500 8000 GB 1812 1.0 ± .10 1000 4000 GC 1812 1.1 ± .10 1000 4000 GD 1812 1.25 ± .15 1000 4000 GF 1812 1.50 ± .15 1000 4000 GK 1812 1.60 ± .20 1000 4000 GL 1812 1.90 ± .20 1000 4000 GM 1812 2.00 ± .20 1000 4000 GN 1812 1.70 ± .20 1000 4000 16V 25V 50V 100V 200V 16V 25V 50V 100V 200V 16V 25V 50V 100V 200V 25V 50V 100V 200V

334 EG EG EG EG FD FD FD FH GB GB GB GK

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP / HIGH VOLTAGE Metric Code EIASize Code L- Length W - Width B - Bandwidth Band Separation 2012 0805 2.0 (0.079) ± 0.2 (0.008) 1.2 (0.049) ± 0.2 (0.008) 0.5 (0.02 3216 1206 3.2 (0.126) ± 0.2 (0.008) 1.6 (0.063) ± 0.2 (0.008) 0.5 (0.02) ± 0.25 (0.010) N/A 3225 1210 3.2 (0.126) ± 0.2 (0.008) 2.5 (0.098) ± 0.2 (0.008) 0.5 (0.02) ± 0.25 (0.010) N/A 4520 1808 4.5 (0.177) ± 0.3 (0.012) 2.0 (0.079 ± 0.2 (0.008) 0.6 (0.024) ± 0.35 (0.014) N/A 4532 1812 4.5 (0.177) ± 0.3 (0.012) 3.2 (0.126) ± 0.3 (0.012) 0.6 (0.024) ± 0.35 (0.014) N/A 4564 1825 4.5 (0.177) ± 0.3 (0.012) 6.4 (0.250) ± 0.4 (0.016) 0.6 (0.024) ± 0.35 (0.014) N/A 5650 2220 5.6 (0.224) ± 0.4 (0.016) 5.0 (0.197) ± 0.4 (0.016) 0.6 (0.024) ± 0.35 (0.014) N/A 5664 2225 5.6 (0.224) ± 0.4 (0.016) 6.4 (0.250) ± 0.4 (0.016) 0.6 (0.024) ± 0.35 (0.014) N/A Outline Drawing KEMET's High Voltage Surface Mount Capacitors are designed to withstand high voltage applications. They offer high capacitance with low leakage current and low ESR at high frequency. The capacitors have pure tin (Sn) plated external electrodes for good solderability. X7R dielectrics are not designed for AC line filtering applications. An insulating coating may be required to prevent surface arcing. These components are RoHS compliant. Applications Markets

• Switch Mode Power Supply • Power Supply
• Input Filter • High Voltage Power Supply
• Resonators • DC-DC Converter
• Tank Circuit • LCD Fluorescent Backlight Ballast
• Snubber Circuit • HID Lighting
• Output Filter • Telecommunications Equipment
• High Voltage Coupling • Industrial Equipment/Control
• High Voltage DC Blocking • Medical Equipment/Control
• Lighting Ballast • Computer (LAN/WAN Interface)
• Voltage Multiplier Circuits • Analog and Digital Modems
• Coupling Capacitor/CUK • Automotive APPLICATIONS MARKETS OUTLINE DRAWING TABLE 1 - DIMENSIONS - MILLIMETERS (in.) W L T B S TIN PLATE NICKEL PLATE CONDUCTIVE MET ALLIZA TION ELECTRODES Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP / HIGH VOLTAGE * Contact KEMET Sales Representative for C, D, F & G Capacitance Tolerance availability. Note:Actual thickness dimensions may be less than stated maximum. Check the KEMET website, www.kemet.com, for additional values and chip sizes available. pg Ceramic Surface Mount C0G DIELECTRIC CAPACITANCE VALUES AND THICKNESS TARGETS (in.) Series Max Thickness (in) 0.050 0.050 0.065 0.065 0.065 0.065 0.101 0.101 0.101 0.101 0.080 0.080 0.080 0.080 0.080 0.080 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 Cap Code/ Voltage 500 1000 500 1000 1500 2000 500 1000 1500 2000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000

10 C,D J,K,M 100

11 C,D J,K,M 110

12 C,D J,K,M 120

13 C,D J,K,M 130

15 C,D G,J,K,M 150

16 C,D G,J,K,M 160

18 C,D G,J,K,M 180

20 C,D G,J,K,M 200

22 C,D G,J,K,M 220

24 C,D G,J,K,M 240

27 D,F,G,J,K,M 270

30 D,F,G,J,K,M 300

33 D,F,G,J,K,M 330

36 D,F,G,J,K,M 360

39 D,F,G,J,K,M 390

43 D,F,G,J,K,M 430

47 D,F,G,J,K,M 470

51 D,F,G,J,K,M 510

56 F,G,J,K,M 560

62 F,G,J,K,M 620

68 F,G,J,K,M 680

75 F,G,J,K,M 750

82 F,G,J,K,M 820

91 F,G,J,K,M 910

100 F,G,J,K,M 101

110 F,G,J,K,M 111

120 F,G,J,K,M 121

130 F,G,J,K,M 131

150 F,G,J,K,M 151

160 F,G,J,K,M 161

180 F,G,J,K,M 181

200 F,G,J,K,M 201

220 F,G,J,K,M 221

240 F,G,J,K,M 241

270 F,G,J,K,M 271

300 F,G,J,K,M 301

330 F,G,J,K,M 331

360 F,G,J,K,M 361

390 F,G,J,K,M 391

430 F,G,J,K,M 431

470 F,G,J,K,M 471

510 F,G,J,K,M 511

560 F,G,J,K,M 561

620 F,G,J,K,M 621

680 F,G,J,K,M 681

750 F,G,J,K,M 751

820 F,G,J,K,M 821

910 F,G,J,K,M 911

1000 F,G,J,K,M 102

1100 F,G,J,K,M 112

1200 F,G,J,K,M 122

1300 F,G,J,K,M 132

1500 F,G,J,K,M 152

1600 F,G,J,K,M 162

1800 F,G,J,K,M 182

2000 F,G,J,K,M 202

2200 F,G,J,K,M 222

2400 F,G,J,K,M 242

2700 F,G,J,K,M 272

3000 F,G,J,K,M 302

3300 F,G,J,K,M 332

3600 F,G,J,K,M 362

3900 F,G,J,K,M 392

4300 F,G,J,K,M 432

4700 F,G,J,K,M 472

5100 F,G,J,K,M 512

5600 F,G,J,K,M 562

6200 F,G,J,K,M 622

6800 F,G,J,K,M 682

7500 F,G,J,K,M 752

8200 F,G,J,K,M 822

9100 F,G,J,K,M 912

10,000 F,G,J,K,M 103 2225 Cap pF Capacitance Tolerance 1825 222018120805 1206 1210 1808

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP / HIGH VOLTAGE Note: Actual thickness dimensions may be less than stated maximum. Check the KEMET website, www.kemet.com, for additional values and chip sizes available. pgX7R DIELECTRIC CAPACITANCE VALUES AND THICKNESS TARGETS (in.) EIA Metric 0805 2012 0.055 1.27 8 2,500 10,000 1206 3216 0.065 1.65 8 2,000 8,000 1210 3225 0.101 2.57 8 2,000 8,000 1808 4520 0.080 2.03 12 1,000 4,000 1812/1813 4532 0.067 1.70 12 1,000 4,000 1825 4564 0.067 1.70 12 1,000 4,000 2220 5650 0.067 1.70 12 1,000 4,000 2225 5664 0.067 1.70 12 1,000 4,000 Qty per Reel 7" Plastic Qty per Reel 13" Plastic KEMET HIGH VOLTAGE SURFACE MOUNT CHIP (VOLTAGE CODES C,D,F,G,H, and Z) THICKNESS AND REELING QUANTITIES Chip size Max. Thickness (in) Max. Thickness (mm) Tape Width (mm) Series Max Thickness (in) 0.050 0.050 0.065 0.065 0.065 0.065 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.080 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 0.067 Cap Code/ Voltage 500 1000 500 1000 1500 2000 500 1000 1500 2000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000 500 1000 1500 2000 2500 3000

10 J,K,M 100

11 J,K,M 110

12 J,K,M 120

13 J,K,M 130

15 J,K,M 150

16 J,K,M 160

18 J,K,M 180

20 J,K,M 200

22 J,K,M 220

24 J,K,M 240

27 J,K,M 270

30 J,K,M 300

33 J,K,M 330

36 J,K,M 360

39 J,K,M 390

43 J,K,M 430

47 J,K,M 470

51 J,K,M 510

56 J,K,M 560

62 J,K,M 620

68 J,K,M 680

75 J,K,M 750

82 J,K,M 820

91 J,K,M 910

100 J,K,M 101

110 J,K,M 111

120 J,K,M 121

130 J,K,M 131

150 J,K,M 151

180 J,K,M 181

220 J,K,M 221

270 J,K,M 271

330 J,K,M 331

390 J,K,M 391

470 J,K,M 471

560 J,K,M 561

680 J,K,M 681

820 J,K,M 821

1000 J,K,M 102

1200 J,K,M 122

1500 J,K,M 152

1800 J,K,M 182

2000 J,K,M 202

2200 J,K,M 222

2700 J,K,M 272

3300 J,K,M 332

3900 J,K,M 392

4700 J,K,M 472

5600 J,K,M 562

6800 J,K,M 682

8200 J,K,M 822

10,000 J,K,M 103 12,000 J,K,M 123 15,000 J,K,M 153 18,000 J,K,M 183 22,000 J,K,M 223 27,000 J,K,M 273 33,000 J,K,M 333 39,000 J,K,M 393 47,000 J,K,M 473 56,000 J,K,M 563 62,000 J,K,M 623 68,000 J,K,M 683 82,000 J,K,M 823 100,000 J,K,M 104 120,000 J,K,M 124 150,000 J,K,M 154 180,000 J,K,M 184 220,000 J,K,M 224 2225 Cap pF Capacitance Tolerance 1825 222018120805 1206 1210 1808 Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP / HIGH VOLTAGE C 0805 C 102 K C R A C Style C - Ceramic Chip Size 0805; 1206; 1210; 1808; 1812; 1825; 2220; 2225 Specification C - Standard Capacitance Code, pF First two digits represent significant figures. Third digit specifies number of zeros. 100 pF = 101. (Use “9” for 1.0 through 9.9 pF) (Use “8” for 0.1 through .99 pF) Capacitance Tolerance F = ±1%* M = ±20% G = ±2%* * Contact KEMET Sales for availability. Voltage C = 500V G = 2000V D = 1000V Z = 2500V F = 1500V H = 3000V Temperature Characteristic Designated by Capacitance Change over Temperature Range G – (C0G) (±30ppm/C) (-55°C +125°C) End Metallization C = Standard Failure Rate Level A = Not Applicable Capacitor Ordering Information Property Specification Capacitance C0G: 1 pF to 0.010 µF X7R: 10 pf to 0.22 µF 25°C, 1.0 ± 0.2 Vrms, 1 kHz (1 MHz for ≤ 1000 pF (C0G only) Cap Tolerance C0G: C*, D*, F*, G*, J, K, M * Contact KEMET Sales for availability. X7R: J, K, M DF C0G: 0.1% Max X7R: 2.5% Max Voltage Ratings 500 V, 1000 V, 1500 V, 2000 V, 2500 V, 3000 V Operating Temperature Range From -55C to +125C 25ºC IR @ 500V 100 GΩ or 1000 MΩ-µF, whichever is less 125ºC IR @ 500V 10 GΩ or 100 MΩ-µF, whichever is less -55ºC TCC +125ºC TCC X7R: + 15% C0G: + 30 ppm / ºC Dielectric Strength 150% of Rated Voltage for Rated Voltage <1000 V 120% of Rated Voltage for Rated Voltage >=1000V Ripple Current Consult KEMET Sales Representative Electrical Parameters Marking These chips are supplied unmarked. If required, they can be supplied LASER-marked at an extra cost. Packaging KEMET High Voltage Surface Mount MLCC are available packaged in tape and reel configuration, or bulk Soldering Process The 0805 and 1206 case sizes are suitable for either reflow or wave soldering processes. Sizes 1210 and larger should be limited to reflow soldering only. All sizes incorporate the standard KEMET barrier layer of pure nickel with an overplating of pure tin (Sn) for excellent solderability and resistance to solder leaching of Recommended Solder Pad Dimensions the termination. bag as outlined on page 83. Please consult factory for waffle packaging options. Details on the marking format is located on page 97. mm in. mm in. mm in. mm in. L (Pad Length)Chip Size T (Total Length) S (Separation W (Pad Width) pF From -55ºC to +125ºC CAPACITOR ORDERING INFORMATION ELECTRICAL PARAMETERS MARKING PACKAGING SOLDERING PROCESS RECOMMENDED SOLDER PAD DIMENSIONS Style Chip Size Specification Capacitance Code, pF Capacitance Tolerance Voltage Temperature Characteristic Failure Rate Level End Metallization

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CAPACITOR ARRAY

• Four individual capacitors inside one 1206 monolithic structure
• Saves board and inventory space
• One placement instead of four - less costly
• Easier to handle and solder than 4 smaller chips
• Tape and reel per EIA 481-1
• RoHS Compliant

W BW P/2 Ref P L CL BW1 T CAPACITOR OUTLINE DRAWING TABLE 1 EIA DIMENSIONS – MILLIMETERS (INCHES) 1632 3.2 (0.126) ± 0.2 (0.008) 1.6 (.063) ± 0.2 (.008) 0.7 - 1.35 (0.027 - 0.053) 0.40 (0.016) ± 0.2 (0.008) 0.1 - 0.5 (0.004 - 0.020) Size Code Length L Width W Thickness T (max.) Bandwidth BW Bandwidth BW1 0.8 (0.031) ± 0.1 (0.004) Pitch P Notes: 1. Metric is controlling - English for reference only. 2. Pitch (P) tolerances are non-cumulative along the package. 3. Thickness (T) depends on capacitance. END METALLIZATION Expressed in Picofarads (pF) First two digits represent significant figures. Third digit specifies number of zeros. (Use 9 for 1.0 thru 9.9pF . (Example: 2.2pF = 229 CERAMIC EIA SIZE CODE SPECIFICATION CAPACITANCE CODE VOLTAGE C - Standard CAPACITANCE TOLERANCE K – ±10%: M – ±20% Standard Tolerances Contact factory for any special requirements. C-Standard (Tin-plated nickel barrier) 5 = 50v; 3 = 25v; 4 = 16v; 8=10v C 1632 C 103 K 5 R C FAILURE RATE LEVEL A A- Not Applicable TEMPERATURE CHARACTERISTIC Designated by Capacitance Change Over T emperature Range G – C0G (NP0) (±30 PPM/°C) R – X7R (±15%) Ceramic chip array CERAMIC ARRAY ORDERING INFORMATION Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP ARRAY TABLE 2A C0G DIELECTRIC – CAPACITANCE RANGE (1) To complete the KEMET part number, insert the alpha code for the tolerance desired. K = ±10% and M = ±20% – standard tolerance. Contact factory for any special requirements. (2) To complete the KEMET part number, insert appropriate number for voltage desired: "5" = 50 volts, "3" = 25 volts, "4" = 16 volts, and "8" = 10 volts. Capacitance Values (pF) KEMET Part Number Capacitance Tolerance 100 120 150 180 220 270 330 390 470 C1632C100(1)(2)GAC C1632C120(1)(2)GAC C1632C150(1)(2)GAC C1632C180(1)(2)GAC C1632C220(1)(2)GAC C1632C270(1)(2)GAC C1632C330(1)(2)GAC C1632C390(1)(2)GAC C1632C470(1)(2)GAC C1632C560(1)(2)GAC C1632C680(1)(2)GAC C1632C820(1)(2)GAC C1632C101(1)(2)GAC C1632C121(1)(2)GAC C1632C151(1)(2)GAC C1632C181(1)(2)GAC C1632C221(1)(2)GAC C1632C271(1)(2)GAC C1632C331(1)(2)GAC C1632C391(1)(2)GAC C1632C471(1)(2)GAC K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 16V 25V 50V 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 LAND PATTERN DIMENSIONS - CERAMIC CHIP CAPACITOR ARRAYS - MM Z 2.80 G 0.40 X 0.52 Y(ref) 1.20 C(ref) 1.60 Reflow Solder Calculation Formula Z = Lmin + 2Jt + Tt G = Smax - 2Jh -Th X = Wmin + 2Js + Ts Tt, Th, Ts = Combined tolerances 3216 Dimension

1632 CERAMIC ARRAY

G

8 PlacesXP

Z Y

6 Places

C Additional pad dimension information is available in KEMET Technical Bulletin F-2100. TABLE 2B X7R DIELECTRIC – CAPACITANCE RANGE (1) To complete the KEMET part number, insert the alpha code for the tolerance desired: K = ±10% and M = ±20% – standard tolerances. Contact factory for any special requirements. (2) To complete the KEMET part number, insert appropriate number for voltage desired: "5" = 50 volts, "3" = 25 volts, "4" = 16 volts , and "8" = 10 volts. Capacitance Values (pF) KEMET Part Number Capacitance Tolerance 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 C1632C331(1)(2)RAC C1632C391(1)(2)RAC C1632C471(1)(2)RAC C1632C561(1)(2)RAC C1632C681(1)(2)RAC C1632C821(1)(2)RAC C1632C102(1)(2)RAC C1632C122(1)(2)RAC C1632C152(1)(2)RAC C1632C182(1)(2)RAC C1632C222(1)(2)RAC C1632C272(1)(2)RAC C1632C332(1)(2)RAC C1632C392(1)(2)RAC C1632C472(1)(2)RAC C1632C562(1)(2)RAC C1632C682(1)(2)RAC C1632C822(1)(2)RAC C1632C103(1)(2)RAC C1632C123(1)(2)RAC C1632C153(1)(2)RAC C1632C183(1)(2)RAC C1632C223(1)(2)RAC C1632C273(1)(2)RAC C1632C333(1)(2)RAC C1632C393(1)(2)RAC C1632C473(1)(2)RAC C1632C563(1)(2)RAC C1632C683(1)(2)RAC C1632C823(1)(2)RAC C1632C104(1)(2)RAC K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 16V 25V 50V 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 10V 10V 100V 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 200V 100 120 150 180 220 270 330 390 470 560 680 820 100V 331 391 471 561 200V 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 P(ref) 0.80

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 KEMET SIZE T STYLE CODE L W MIN. MAX. BW CERAMIC CHIP/MIL-PRF-55681 CERAMIC SIZE CODE See Table Above SPECIFICATION P-MIL-PRF-55681 = CDR01-CDR06 N-MIL-PRF-55681 = CDR31-CDR35 CAPACITANCE CODE Expressed in picofarads (pF). First two digits represent significant figures. Third digit specifies number of zeros. (Use 9 for 1.0 thru 9.9 pF. Example: 2.2 pF –229) CAPACITANCE TOLERANCE BCD F J K M FAILURE RATE LEVEL(%/1000 hrs.) M — 1.0 R — 0.01 P — 0.1 S — 0.001 TERMINATION FINISH S — Solder Coated, Final W — Base Metalization— (SolderGuard I) Barrier Metal — Tinned U — Base Metalization— Tin or (Tin/Lead Alloy) Barrier Metal— Solder SolderGuard II Coated (SolderGuard I) Y — Base Metalization Barrier Metal— Tinned (100% Tin) Solderguard II CAPACITANCE TOLERANCE BCD F J K M RATED VOLTAGE A — 50; B — 100 END METALIZATION C — SolderGuard II (100% Sn) (Military equiv: Y, W) H — SolderGuard I (Sn60) (Military equiv: S, U) FAILURE RATE (%/1,000 hrs.) M — 1.0 R — 0.01 P — 0.1 S — 0.001 VOLTAGE TEMPERATURE CHARACTERISTIC Designated by Capacitance Change Over Temperature Range G — BP (C0G/NP0) (±30 PPM/°C) X — BX (±15% Without Voltage +15% -25% With Voltage) VOLTAGE 1 — 100V, 5 — 50V MIL-PRF-55681 PART NUMBER ORDERING INFORMATION CAPACITOR OUTLINE DRAWINGS DIMENSIONS—MILLIMETERS AND (INCHES) Note: For Solderguard I (MIL-C55681 “S” or “U” Endmets), the length, width and thickness positive tolerances (including bandwidth) cited above are allowed to increase by the following amounts: Length Width/Thickness CDR01 0.51MM (.020) 0.38MM (.015) CDR02-06 0.64MM (.025) 0.38MM (.015) CDR31-35 0.60MM (.023) 0.30MM (.012) CDR01 B P 101 B K S M STYLE & SIZE CODE STYLE C— Ceramic D— Dielectric, Fixed Chip R — Established Reliability RATED TEMPERATURE –55°C to +125°C DIELECTRICS P— ± 30 PPM/°C— WITH OR WITHOUT VOLTAGE X — ± 15%— without voltage + 15%, –25%— with voltage CAPACITANCE Expressed in picofarads (pF). First 2 digits represent significant figures and the last digit specifies the number of zeros to follow. (Use 9 for 1.0 through 9.9pF. Example: 2.2pF = 229)KEMET/MIL-PRF-55681 PART NUMBER EQUIVALENTS C 0805 P 101 K 1 G M C* CHIP DIMENSIONS BW W L T “SOLDERGUARD I” * SOLDER NICKEL SIL VER MET ALLIZA TION ELECTRODES “SOLDERGUARD II” TINNED NICKEL SIL VER MET ALLIZA TION ELECTRODES Military Designation - “S” or “U” KEMET Designation - “H” Military Designation - “W” or “Y” KEMET Designation - “C” * Part Number Example: C0805P101K1GMC (14 digits - no spaces) Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CHARAC- CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 TERISTIC pF TOL. PART NUMBER

100 Volt — C1808 SIZE (MILITARY CDR03) (Cont’d)

560 J C1808P561J1G(4)C CDR03BP561BJW(4)

680 J,K C1808P681(3)1G(4)C CDR03BP681B(3)W(4)

820 J C1808P821J1G(4)C CDR03BP821BJW(4)

1,000 J,K C1808P102(3)1G(4)C CDR03BP102B(3)W(4) 12,000 K C1808P123K1X(4)C CDR03BX123BKW(4) 15,000 K,M C1808P153(3)1X(4)C CDR03BX153B(3)W(4) 18,000 K C1808P183K1X(4)C CDR03BX183BKW(4) 22,000 K,M C1808P223(3)1X(4)C CDR03BX223B(3)W(4) 27,000 K C1808P273K1X(4)C CDR03BX273BKW(4) 33,000 K,M C1808P333(3)1X(4)C CDR03BX333B(3)W(4)

50 Volt — C1808 SIZE (MILITARY CDR03)

39,000 K C1808P393K5X(4)C CDR03BX393AKW(4) 47,000 K,M C1808P473(3)5X(4)C CDR03BX473A(3)W(4) 56,000 K C1808P563K5X(4)C CDR03BX563AKW(4) 68,000 K,M C1808P683(3)5X(4)C CDR03BX683A(3)W(4)

100 Volt — C1812 SIZE (MILITARY CDR04)

1,200 J C1812P122J1G(4)C CDR04BP122BJW(4) 1,500 J,K C1812P152(3)1G(4)C CDR04BP152B(3)W(4) 1,800 J C1812P182J1G(4)C CDR04BP182BJW(4) 2,200 J,K C1812P222(3)1G(4)C CDR04BP222B(3)W(4) 2,700 J C1812P272J1G(4)C CDR04BP272BJW(4) 3,300 J,K C1812P332(3)1G(4)C CDR04BP332B(3)W(4) 39,000 K C1812P393K1X(4)C CDR04BX393BKW(4) 47,000 K,M C1812P473(3)1X(4)C CDR04BX473B(3)W(4) 56,000 K C1812P563K1X(4)C CDR04BX563BKW(4)

50 Volt — C1812 SIZE (MILITARY CDR04)

82,000 K C1812P823K5X(4)C CDR04BX823AKW(4) 100,000 K,M C1812P104(3)5X(4)C CDR04BX104A(3)W(4) 120,000 K C1812P124K5X(4)C CDR04BX124AKW(4) 150,000 K,M C1812P154(3)5X(4)C CDR04BX154A(3)W(4) 180,000 K C1812P184K5X(4)C CDR04BX184AKW(4)

100 Volt — C1825 SIZE (MILITARY CDR05)

3,900 J,K C1825P392(3)1G(4)C CDR05BP392B(3)W(4) 4,700 J,K C1825P472(3)1G(4)C CDR05BP472B(3)W(4) 5,600 J,K C1825P562(3 )1G(4)C CDR05BP562B(3)W(4) 68,000 K,M C1825P683(3)1X(4)C CDR05BX683B(3)W(4) 82,000 K C1825P823K1X(4)C CDR05BX823BKW(4) 100,000 K,M C1825P104(3)1X(4)C CDR05BX104B(3)W(4) 120,000 K C1825P124K1X(4)C CDR05BX124BKW(4) 150,000 K,M C1825P154(3)1X(4)C CDR05BX154B(3)W(4)

50 Volt — C1825 SIZE (MILITARY CDR05)

220,000 K,M C1825P224(3)5X(4)C CDR05BX224A(3)W(4) 270,000 K C1825P274K5X(4)C CDR05BX274AKW(4) 330,000 K,M C1825P334(3)5X(4)C CDR05BX334A(3)W(4)

100 Volt — C2225 SIZE (MILITARY CDR06)

6,800 J,K C2225P682(3)1G(4)C CDR06BP682B(3)W(4) 8,200 J,K C2225P822(3)1G(4)C CDR06BP822B(3)W(4) 10,000 J,K C2225P103(3)1G(4)C CDR06BP103B(3)W(4)

50 Volt — C2225 SIZE (MILITARY CDR06)

390,000 K C2225P394K5X(4)C CDR06BX394AKW(4) 470,000 K,M C2225P474(3)5X(4)C CDR06BX474A(3)W(4) CHARAC- CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 TERISTIC pF TOL. PART NUMBER

100 Volt — C0805 SIZE (MILITARY CDR01)

10 J,K C0805P100(3)1G(4)C CDR01BP100B(3)W(4)

12 J C0805P120J1G(4)C CDR01BP120BJW(4)

15 J,K C0805P150(3)1G(4)C CDR01BP150B(3)W(4)

18 J C0805P180J1G(4)C CDR01BP180BJW(4)

22 J,K C0805P220(3)1G(4)C CDR01BP220B(3)W(4)

27 J C0805P270J1G(4)C CDR01BP270BJW(4)

33 J,K C0805P330(3)1G(4)C CDR01BP330B(3)W(4)

39 J C0805P390J1G(4)C CDR01BP390BJW(4)

47 J,K C0805P470(3)1G(4)C CDR01BP470B(3)W(4)

56 J C0805P560J1G(4)C CDR01BP560BJW(4)

68 J,K C0805P680(3)1G(4)C CDR01BP680B(3)W(4)

82 J C0805P820J1G(4)C CDR01BP820BJW(4)

100 J,K C0805P101(3)1G(4)C CDR01BP101B(3)W(4)

220 K,M C0805P221(3)1X(4)C CDR01BX221B(3)W(4)

270 K C0805P271K1X(4)C CDR01BX271BKW(4)

330 K,M C0805P331(3)1X(4)C CDR01BX331B(3)W(4)

390 K C0805P391K1X(4)C CDR01BX391BKW(4)

470 K,M C0805P471(3)1X(4)C CDR01BX471B(3)W(4)

560 K C0805P561K1X(4)C CDR01BX561BKW(4)

680 K,M C0805P681(3)1X(4)C CDR01BX681B(3)W(4)

820 K C0805P821K1X(4)C CDR01BX821BKW(4)

1,000 K,M C0805P102(3)1X(4)C CDR01BX102B(3)W(4) 1,200 K C0805P122K1X(4)C CDR01BX122BKW(4) 1,500 K,M C0805P152(3)1X(4)C CDR01BX152B(3)W(4) 1,800 K C0805P182K1X(4)C CDR01BX182BKW(4) 2,200 K,M C0805P222(3)1X(4)C CDR01BX222B(3)W(4) 2,700 K C0805P272K1X(4)C CDR01BX272BKW(4) 3,300 K,M C0805P332(3)1X(4)C CDR01BX332B(3)W(4)

50 Volt — C0805 SIZE (MILITARY CDR01)

3,900 K C0805P392K5X(4)C CDR01BX392AKW(4) 4,700 K,M C0805P472(3)5X(4)C CDR01BX472A(3)W(4)

100 Volt — C1805 SIZE (MILITARY CDR02)

220 J,K C1805P221(3)1G(4)C CDR02BP221B(3)W(4)

270 J C1805P271J1G(4)C CDR02BP271BJW(4)

3,900 K C1805P392K1X(4)C CDR02BX392BKW(4) 4,700 K,M C1805P472(3)1X(4)C CDR02BX472B(3)W(4) 5,600 K C1805P562K1X(4)C CDR02BX562BKW(4) 6,800 K,M C1805P682(3)1X(4)C CDR02BX682B(3)W(4) 8,200 K C1805P822K1X(4)C CDR02BX822BKW(4) 10,000 K,M C1805P103(3)1X(4)C CDR02BX103B(3)W(4)

50 Volt — C1805 SIZE (MILITARY CDR02)

12,000 K C1805P123K5X(4)C CDR02BX123AKW(4) 15,000 K,M C1805P153(3)5X(4)C CDR02BX153A(3)W(4) 18,000 K C1805P183K5X(4)C CDR02BX183AKW(4) 22,000 K,M C1805P223(3)5X(4)C CDR02BX223A(3)W(4)

100 Volt — C1808 SIZE (MILITARY CDR03)

330 J,K C1808P331(3)1G(4)C CDR03BP331B(3)W(4)

390 J C1808P391J1G(4)C CDR03BP391BJW(4)

470 J,K C1808P471(3)1G(4)C CDR03BP471B(3)W(4)

BX BPBXBXBX BPBP BX BX BP BX CERAMIC CHIP/MIL-PRF-55681 Established Reliability RATINGS & PART NUMBER REFERENCE BXBPBXBXBP (1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification. (2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”) (3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF, D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above. Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metaliza- tion. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly. BPBP or BXBX

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 pF TOL. PART NUMBER

100 Volt — BP — C0805 SIZE (MILITARY CDR31)

91 F,J,K C0805N910(3)1G(4)C CDR31BP910B(3)W(4)

100 F,J,K C0805N101(3)1G(4)C CDR31BP101B(3)W(4)

110 F,J,K C0805N111(3)1G(4)C CDR31BP111B(3)W(4)

120 F,J,K C0805N121(3)1G(4)C CDR31BP121B(3)W(4)

130 F,J,K C0805N131(3)1G(4)C CDR31BP131B(3)W(4)

150 F,J,K C0805N151(3)1G(4)C CDR31BP151B(3)W(4)

160 F,J,K C0805N161(3)1G(4)C CDR31BP161B(3)W(4)

180 F,J,K C0805N181(3)1G(4)C CDR31BP181B(3)W(4)

200 F,J,K C0805N201(3)1G(4)C CDR31BP201B(3)W(4)

220 F,J,K C0805N221(3)1G(4)C CDR31BP221B(3)W(4)

240 F,J,K C0805N241(3)1G(4)C CDR31BP241B(3)W(4)

270 F,J,K C0805N271(3)1G(4)C CDR31BP271B(3)W(4)

300 F,J,K C0805N301(3)1G(4)C CDR31BP301B(3)W(4)

330 F,J,K C0805N331(3)1G(4)C CDR31BP331B(3)W(4)

360 F,J,K C0805N361(3)1G(4)C CDR31BP361B(3)W(4)

390 F,J,K C0805N391(3)1G(4)C CDR31BP391B(3)W(4)

430 F,J,K C0805N431(3)1G(4)C CDR31BP431B(3)W(4)

470 F,J,K C0805N471(3)1G(4)C CDR31BP471B(3)W(4)

50 Volt — BP — C0805 SIZE (MILITARY CDR31)

510 F,J,K C0805N511(3)5G(4)C CDR31BP511A(3)W(4)

560 F,J,K C0805N561(3)5G(4)C CDR31BP561A(3)W(4)

620 F,J,K C0805N621(3)5G(4)C CDR31BP621A(3)W(4)

680 F,J,K C0805N681(3)5G(4)C CDR31BP681A(3)W(4)

100 Volt — BX — C0805 SIZE (MILITARY CDR31)

470 K,M C0805N471(3)1X(4)C CDR31BX471B(3)W(4)

560 K,M C0805N561(3)1X(4)C CDR31BX561B(3)W(4)

680 K,M C0805N681(3)1X(4)C CDR31BX681B(3)W(4)

820 K,M C0805N821(3)1X(4)C CDR31BX821B(3)W(4)

1,000 K,M C0805N102(3)1X(4)C CDR31BX102B(3)W(4) 1,200 K,M C0805N122(3)1X(4)C CDR31BX122B(3)W(4) 1,500 K,M C0805N152(3)1X(4)C CDR31BX152B(3)W(4) 1,800 K,M C0805N182(3)1X(4)C CDR31BX182B(3)W(4) 2,200 K,M C0805N222(3)1X(4)C CDR31BX222B(3)W(4) 2,700 K,M C0805N272(3)1X(4)C CDR31BX272B(3)W(4) 3,300 K,M C0805N332(3)1X(4)C CDR31BX332B(3)W(4) 3,900 K,M C0805N392(3)1X(4)C CDR31BX392B(3)W(4) 4,700 K,M C0805N472(3)1X(4)C CDR31BX472B(3)W(4)

50 Volt — BX — C0805 SIZE (MILITARY CDR31)

5,600 K,M C0805N562(3)5X(4)C CDR31BX562A(3)W(4) 6,800 K,M C0805N682(3)5X(4)C CDR31BX682A(3)W(4) 8,200 K,M C0805N822(3)5X(4)C CDR31BX822A(3)W(4) 10,000 K,M C0805N103(3)5X(4)C CDR31BX103A(3)W(4) 12,000 K,M C0805N123(3)5X(4)C CDR31BX123A(3)W(4) 15,000 K,M C0805N153(3)5X(4)C CDR31BX153A(3)W(4) 18,000 K,M C0805N183(3)5X(4)C CDR31BX183A(3)W(4) CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 pF TOL. PART NUMBER

1.0 B,C C0805N109(3)1G(4)C CDR31BP1R0B(3)W(4)

1.1 B,C C0805N119(3)1G(4)C CDR31BP1R1B(3)W(4)

1.2 B,C C0805N129(3)1G(4)C CDR31BP1R2B(3)W(4)

1.3 B,C C0805N139(3)1G(4)C CDR31BP1R3B(3)W(4)

1.5 B,C C0805N159(3)1G(4)C CDR31BP1R5B(3)W(4)

1.6 B,C C0805N169(3)1G(4)C CDR31BP1R6B(3)W(4)

1.8 B,C C0805N189(3)1G(4)C CDR31BP1R8B(3)W(4)

2.0 B,C C0805N209(3)1G(4)C CDR31BP2R0B(3)W(4)

2.2 B,C C0805N229(3)1G(4)C CDR31BP2R2B(3)W(4)

2.4 B,C C0805N249(3)1G(4)C CDR31BP2R4B(3)W(4)

2.7 B,C,D C0805N279(3)1G(4)C CDR31BP2R7B(3)W(4)

3.0 B,C,D C0805N309(3)1G(4)C CDR31BP3R0B(3)W(4)

3.3 B,C,D C0805N339(3)1G(4)C CDR31BP3R3B(3)W(4)

3.6 B,C,D C0805N369(3)1G(4)C CDR31BP3R6B(3)W(4)

3.9 B,C,D C0805N399(3)1G(4)C CDR31BP3R9B(3)W(4)

4.3 B,C,D C0805N439(3)1G(4)C CDR31BP4R3B(3)W(4)

4.7 B,C,D C0805N479(3)1G(4)C CDR31BP4R7B(3)W(4)

5.1 B,C,D C0805N519(3)1G(4)C CDR31BP5R1B(3)W(4)

5.6 B,C,D C0805N569(3)1G(4)C CDR31BP5R6B(3)W(4)

6.2 B,C,D C0805N629(3)1G(4)C CDR31BP6R2B(3)W(4)

6.8 B,C,D C0805N689(3)1G(4)C CDR31BP6R8B(3)W(4)

7.5 B,C,D C0805N759(3)1G(4)C CDR31BP7R5B(3)W(4)

8.2 B,C,D C0805N829(3)1G(4)C CDR31BP8R2B(3)W(4)

9.1 B,C,D C0805N919(3)1G(4)C CDR31BP9R1B(3)W(4)

10 F,J,K C0805N100(3)1G(4)C CDR31BP100B(3)W(4)

11 F,J,K C0805N110(3)1G(4)C CDR31BP110B(3)W(4)

12 F,J,K C0805N120(3)1G(4)C CDR31BP120B(3)W(4)

13 F,J,K C0805N130(3)1G(4)C CDR31BP130B(3)W(4)

15 F,J,K C0805N150(3)1G(4)C CDR31BP150B(3)W(4)

16 F,J,K C0805N160(3)1G(4)C CDR31BP160B(3)W(4)

18 F,J,K C0805N180(3)1G(4)C CDR31BP180B(3)W(4)

20 F,J,K C0805N200(3)1G(4)C CDR31BP200B(3)W(4)

22 F,J,K C0805N220(3)1G(4)C CDR31BP220B(3)W(4)

24 F,J,K C0805N240(3)1G(4)C CDR31BP240B(3)W(4)

27 F,J,K C0805N270(3)1G(4)C CDR31BP270B(3)W(4)

30 F,J,K C0805N300(3)1G(4)C CDR31BP300B(3)W(4)

33 F,J,K C0805N330(3)1G(4)C CDR31BP330B(3)W(4)

36 F,J,K C0805N360(3)1G(4)C CDR31BP360B(3)W(4)

39 F,J,K C0805N390(3)1G(4)C CDR31BP390B(3)W(4)

43 F,J,K C0805N430(3)1G(4)C CDR31BP430B(3)W(4)

47 F,J,K C0805N470(3)1G(4)C CDR31BP470B(3)W(4)

51 F,J,K C0805N510(3)1G(4)C CDR31BP510B(3)W(4)

56 F,J,K C0805N560(3)1G(4)C CDR31BP560B(3)W(4)

62 F,J,K C0805N620(3)1G(4)C CDR31BP620B(3)W(4)

68 F,J,K C0805N680(3)1G(4)C CDR31BP680B(3)W(4)

75 F,J,K C0805N750(3)1G(4)C CDR31BP750B(3)W(4)

82 F,J,K C0805N820(3)1G(4)C CDR31BP820B(3)W(4)

CERAMIC CHIP/MIL-PRF-55681 Established Reliablility RATINGS & PART NUMBER REFERENCE MARKING See page 97 for MIL-PRF-55681 Marking (1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification. (2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”) (3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF. D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above. Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metal- ization. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly. Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 pF TOL. PART NUMBER

100 Volt — BP — C1206 SIZE (MILITARY CDR32)

1.0 B,C C1206N109(3)1G(4)C CDR32BP1R0B(3)W(4)

1.1 B,C C1206N119(3)1G(4)C CDR32BP1R1B(3)W(4)

1.2 B,C C1206N129(3)1G(4)C CDR32BP1R2B(3)W(4)

1.3 B,C C1206N139(3)1G(4)C CDR32BP1R3B(3)W(4)

1.5 B,C C1206N159(3)1G(4)C CDR32BP1R5B(3)W(4)

1.6 B,C C1206N169(3)1G(4)C CDR32BP1R6B(3)W(4)

1.8 B,C C1206N189(3)1G(4)C CDR32BP1R8B(3)W(4)

2.0 B,C C1206N209(3)1G(4)C CDR32BP2R0B(3)W(4)

2.2 B,C C1206N229(3)1G(4)C CDR32BP2R2B(3)W(4)

2.4 B,C C1206N249(3)1G(4)C CDR32BP2R4B(3)W(4)

2.7 B,C,D C1206N279(3)1G(4)C CDR32BP2R7B(3)W(4)

3.0 B,C,D C1206N309(3)1G(4)C CDR32BP3R0B(3)W(4)

3.3 B,C,D C1206N339(3)1G(4)C CDR32BP3R3B(3)W(4)

3.6 B,C,D C1206N369(3)1G(4)C CDR32BP3R6B(3)W(4)

3.9 B,C,D C1206N399(3)1G(4)C CDR32BP3R9B(3)W(4)

4.3 B,C,D C1206N439(3)1G(4)C CDR32BP4R3B(3)W(4)

4.7 B,C,D C1206N479(3)1G(4)C CDR32BP4R7B(3)W(4)

5.1 B,C,D C1206N519(3)1G(4)C CDR32BP5R1B(3)W(4)

5.6 B,C,D C1206N569(3)1G(4)C CDR32BP5R6B(3)W(4)

6.2 B,C,D C1206N629(3)1G(4)C CDR32BP6R2B(3)W(4)

6.8 B,C,D C1206N689(3)1G(4)C CDR32BP6R8B(3)W(4)

7.5 B,C,D C1206N759(3)1G(4)C CDR32BP7R5B(3)W(4)

8.2 B,C,D C1206N829(3)1G(4)C CDR32BP8R2B(3)W(4)

9.1 B,C,D C1206N919(3)1G(4)C CDR32BP9R1B(3)W(4)

10 F,J,K C1206N100(3)1G(4)C CDR32BP100B(3)W(4)

11 F,J,K C1206N110(3)1G(4)C CDR32BP110B(3)W(4)

12 F,J,K C1206N120(3)1G(4)C CDR32BP120B(3)W(4)

13 F,J,K C1206N130(3)1G(4)C CDR32BP130B(3)W(4)

15 F,J,K C1206N150(3)1G(4)C CDR32BP150B(3)W(4)

16 F,J,K C1206N160(3)1G(4)C CDR32BP160B(3)W(4)

18 F,J,K C1206N180(3)1G(4)C CDR32BP180B(3)W(4)

20 F,J,K C1206N200(3)1G(4)C CDR32BP200B(3)W(4)

22 F,J,K C1206N220(3)1G(4)C CDR32BP220B(3)W(4)

24 F,J,K C1206N240(3)1G(4)C CDR32BP240B(3)W(4)

27 F,J,K C1206N270(3)1G(4)C CDR32BP270B(3)W(4)

30 F,J,K C1206N300(3)1G(4)C CDR32BP300B(3)W(4)

33 F,J,K C1206N330(3)1G(4)C CDR32BP330B(3)W(4)

36 F,J,K C1206N360(3)1G(4)C CDR32BP360B(3)W(4)

39 F,J,K C1206N390(3)1G(4)C CDR32BP390B(3)W(4)

43 F,J,K C1206N430(3)1G(4)C CDR32BP430B(3)W(4)

47 F,J,K C1206N470(3)1G(4)C CDR32BP470B(3)W(4)

51 F,J,K C1206N510(3)1G(4)C CDR32BP510B(3)W(4)

56 F,J,K C1206N560(3)1G(4)C CDR32BP560B(3)W(4)

62 F,J,K C1206N620(3)1G(4)C CDR32BP620B(3)W(4)

68 F,J,K C1206N680(3)1G(4)C CDR32BP680B(3)W(4)

75 F,J,K C1206N750(3)1G(4)C CDR32BP750B(3)W(4)

82 F,J,K C1206N820(3)1G(4)C CDR32BP820B(3)W(4)

91 F,J,K C1206N910(3)1G(4)C CDR32BP910B(3)W(4)

100 F,J,K C1206N101(3)1G(4)C CDR32BP101B(3)W(4)

CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 pF TOL. PART NUMBER

110 F,J,K C1206N111(3)1G(4)C CDR32BP111B(3)W(4)

120 F,J,K C1206N121(3)1G(4)C CDR32BP121B(3)W(4)

130 F,J,K C1206N131(3)1G(4)C CDR32BP131B(3)W(4)

150 F,J,K C1206N151(3)1G(4)C CDR32BP151B(3)W(4)

160 F,J,K C1206N161(3)1G(4)C CDR32BP161B(3)W(4)

180 F,J,K C1206N181(3)1G(4)C CDR32BP181B(3)W(4)

200 F,J,K C1206N201(3)1G(4)C CDR32BP201B(3)W(4)

220 F,J,K C1206N221(3)1G(4)C CDR32BP221B(3)W(4)

240 F,J,K C1206N241(3)1G(4)C CDR32BP241B(3)W(4)

270 F,J,K C1206N271(3)1G(4)C CDR32BP271B(3)W(4)

300 F,J,K C1206N301(3)1G(4)C CDR32BP301B(3)W(4)

330 F,J,K C1206N331(3)1G(4)C CDR32BP331B(3)W(4)

360 F,J,K C1206N361(3)1G(4)C CDR32BP361B(3)W(4)

390 F,J,K C1206N391(3)1G(4)C CDR32BP391B(3)W(4)

430 F,J,K C1206N431(3)1G(4)C CDR32BP431B(3)W(4)

470 F,J,K C1206N471(3)1G(4)C CDR32BP471B(3)W(4)

510 F,J,K C1206N511(3)1G(4)C CDR32BP511B(3)W(4)

560 F,J,K C1206N561(3)1G(4)C CDR32BP561B(3)W(4)

620 F,J,K C1206N621(3)1G(4)C CDR32BP621B(3)W(4)

680 F,J,K C1206N681(3)1G(4)C CDR32BP681B(3)W(4)

750 F,J,K C1206N751(3)1G(4)C CDR32BP751B(3)W(4)

820 F,J,K C1206N821(3)1G(4)C CDR32BP821B(3)W(4)

910 F,J,K C1206N911(3)1G(4)C CDR32BP911B(3)W(4)

1,000 F,J,K C1206N102(3)1G(4)C CDR32BP102B(3)W(4)

50 Volt — BP — C1206 SIZE (MILITARY CDR32)

1,100 F,J,K C1206N112(3)5G(4)C CDR32BP112A(3)W(4) 1,200 F,J,K C1206N122(3)5G(4)C CDR32BP122A(3)W(4) 1,300 F,J,K C1206N132(3)5G(4)C CDR32BP132A(3)W(4) 1,500 F,J,K C1206N152(3)5G(4)C CDR32BP152A(3)W(4) 1,600 F,J,K C1206N162(3)5G(4)C CDR32BP162A(3)W(4) 1,800 F,J,K C1206N182(3)5G(4)C CDR32BP182A(3)W(4) 2,000 F,J,K C1206N202(3)5G(4)C CDR32BP202A(3)W(4) 2,200 F,J,K C1206N222(3)5G(4)C CDR32BP222A(3)W(4)

100 Volt — BX — C1206 SIZE (MILITARY CDR32)

4,700 K,M C1206N472(3)1X(4)C CDR32BX472B(3)W(4) 5,600 K,M C1206N562(3)1X(4)C CDR32BX562B(3)W(4) 6,800 K,M C1206N682(3)1X(4)C CDR32BX682B(3)W(4) 8,200 K,M C1206N822(3)1X(4)C CDR32BX822B(3)W(4) 10,000 K,M C1206N103(3)1X(4)C CDR32BX103B(3)W(4) 12,000 K,M C1206N123(3)1X(4)C CDR32BX123B(3)W(4) 15,000 K,M C1206N153(3)1X(4)C CDR32BX153B(3)W(4)

50 Volt — BX — C1206 SIZE (MILITARY CDR32)

18,000 K,M C1206N183(3)5X(4)C CDR32BX183A(3)W(4) 22,000 K,M C1206N223(3)5X(4)C CDR32BX223A(3)W(4) 27,000 K,M C1206N273(3)5X(4)C CDR32BX273A(3)W(4) 33,000 K,M C1206N333(3)5X(4)C CDR32BX333A(3)W(4) 39,000 K,M C1206N393(3)5X(4)C CDR32BX393A(3)W(4) CERAMIC CHIP/MIL-PRF-55681 Established Reliability RATINGS & PART NUMBER REFERENCE (1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification. (2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”) (3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF. D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above. Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metaliza- tion. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly.

CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 pF TOL. PART NUMBER

100 Volt — BX — C1812 SIZE (MILITARY CDR34)

27,000 K,M C1812N273(3)1X(4)C CDR34BX273B(3)W(4) 33,000 K,M C1812N333(3)1X(4)C CDR34BX333B(3)W(4) 39,000 K,M C1812N393(3)1X(4)C CDR34BX393B(3)W(4) 47,000 K,M C1812N473(3)1X(4)C CDR34BX473B(3)W(4) 56,000 K,M C1812N563(3)1X(4)C CDR34BX563B(3)W(4)

50 Volt — BX — C1812 SIZE (MILITARY CDR34)

100,000 K,M C1812N104(3)5X(4)C CDR34BX104A(3)W(4) 120,000 K,M C1812N124(3)5X(4)C CDR34BX124A(3)W(4) 150,000 K,M C1812N154(3)5X(4)C CDR34BX154A(3)W(4) 180,000 K,M C1812N184(3)5X(4)C CDR34BX184A(3)W(4)

100 Volt — BP — C1825 SIZE (MILITARY CDR35)

4,700 F,J,K C1825N472(3)1G(4)C CDR35BP472B(3)W(4) 5,100 F,J,K C1825N512(3)1G(4)C CDR35BP512B(3)W(4) 5,600 F,J,K C1825N562(3)1G(4)C CDR35BP562B(3)W(4) 6,200 F,J,K C1825N622(3)1G(4)C CDR35BP622B(3)W(4) 6,800 F,J,K C1825N682(3)1G(4)C CDR35BP682B(3)W(4) 7,500 F,J,K C1825N752(3)1G(4)C CDR35BP752B(3)W(4) 8,200 F,J,K C1825N822(3)1G(4)C CDR35BP822B(3)W(4) 9,100 F,J,K C1825N912(3)1G(4)C CDR35BP912B(3)W(4) 10,000 F,J,K C1825N103(3)1G(4)C CDR35BP103B(3)W(4)

50 Volt — BP — C1825 SIZE (MILITARY CDR35)

11,000 F,J,K C1825N113(3)5G(4)C CDR35BP113A(3)W(4) 12,000 F,J,K C1825N123(3)5G(4)C CDR35BP123A(3)W(4) 13,000 F,J,K C1825N133(3)5G(4)C CDR35BP133A(3)W(4) 15,000 F,J,K C1825N153(3)5G(4)C CDR35BP153A(3)W(4) 16,000 F,J,K C1825N163(3)5G(4)C CDR35BP163A(3)W(4) 18,000 F,J,K C1825N183(3)5G(4)C CDR35BP183A(3)W(4) 20,000 F,J,K C1825N203(3)5G(4)C CDR35BP203A(3)W(4) 22,000 F,J,K C1825N223(3)5G(4)C CDR35BP223A(3)W(4)

100 Volt — BX — C1825 SIZE (MILITARY CDR35)

56,000 K,M C1825N563(3)1X(4)C CDR35BX563B(3)W(4) 68,000 K,M C1825N683(3)1X(4)C CDR35BX683B(3)W(4) 82,000 K,M C1825N823(3)1X(4)C CDR35BX823B(3)W(4) 100,000 K,M C1825N104(3)1X(4)C CDR35BX104B(3)W(4) 120,000 K,M C1825N124(3)1X(4)C CDR35BX124B(3)W(4) 150,000 K,M C1825N154(3)1X(4)C CDR35BX154B(3)W(4)

50 Volt — BX — C1825 SIZE (MILITARY CDR35)

180,000 K,M C1825N184(3)5X(4)C CDR35BX184A(3)W(4) 220,000 K,M C1825N224(3)5X(4)C CDR35BX224A(3)W(4) 270,000 K,M C1825N274(3)5X(4)C CDR35BX274A(3)W(4) 330,000 K,M C1825N334(3)5X(4)C CDR35BX334A(3)W(4) 390,000 K,M C1825N394(3)5X(4)C CDR35BX394A(3)W(4) 470,000 K,M C1825N474(3)5X(4)C CDR35BX474A(3)W(4) BULK - BULK - CHIP BULK - ANTI-STATIC CHIP BULK - ANTI-STATIC SIZE REELED STD BAG BAG SIZE REELED STD BAG BAG C0805 2,500 25,000 10,000 C1808 2,500 7,500 3,000 C1206 2,500 25,000 10,000 C1812 1,100 7,500 3,000 C1210 2,500 25,000 10,000 C1825 1,100 7,500 1,000 C1805 2,500 7,500 3,000 C2225 1,100 5,000 1,000 CAP. AVAIL. KEMET CAPACITORS MIL-PRF-55681 pF TOL. PART NUMBER

100 Volt — BP — C1210 SIZE (MILITARY CDR33)

1,000 F,J,K C1210N102(3)1G(4)C CDR33BP102B(3)W(4) 1,100 F,J,K C1210N112(3)1G(4)C CDR33BP112B(3)W(4) 1,200 F,J,K C1210N122(3)1G(4)C CDR33BP122B(3)W(4) 1,300 F,J,K C1210N132(3)1G(4)C CDR33BP132B(3)W(4) 1,500 F,J,K C1210N152(3)1G(4)C CDR33BP152B(3)W(4) 1,600 F,J,K C1210N162(3)1G(4)C CDR33BP162B(3)W(4) 1,800 F,J,K C1210N182(3)1G(4)C CDR33BP182B(3)W(4) 2,000 F,J,K C1210N202(3)1G(4)C CDR33BP202B(3)W(4) 2,200 F,J,K C1210N222(3)1G(4)C CDR33BP222B(3)W(4)

50 Volt — BP — C1210 SIZE (MILITARY CDR33)

2,400 F,J,K C1210N242(3)5G(4)C CDR33BP242A(3)W(4) 2,700 F,J,K C1210N272(3)5G(4)C CDR33BP272A(3)W(4) 3,000 F,J,K C1210N302(3)5G(4)C CDR33BP302A(3)W(4) 3,300 F,J,K C1210N332(3)5G(4)C CDR33BP332A(3)W(4)

100 Volt — BX — C1210 SIZE (MILITARY CDR33)

15,000 K,M C1210N153(3)1X(4)C CDR33BX153B(3)W(4) 18,000 K,M C1210N183(3)1X(4)C CDR33BX183B(3)W(4) 22,000 K,M C1210N223(3)1X(4)C CDR33BX223B(3)W(4) 27,000 K,M C1210N273(3)1X(4)C CDR33BX273B(3)W(4)

50 Volt — BX — C1210 SIZE (MILITARY CDR33)

39,000 K,M C1210N393(3)5X(4)C CDR33BX393A(3)W(4) 47,000 K,M C1210N473(3)5X(4)C CDR33BX473A(3)W(4) 56,000 K,M C1210N563(3)5X(4)C CDR33BX563A(3)W(4) 68,000 K,M C1210N683(3)5X(4)C CDR33BX683A(3)W(4) 82,000 K,M C1210N823(3)5X(4)C CDR33BX823A(3)W(4) 100,000 K,M C1210N104(3)5X(4)C CDR33BX104A(3)W(4)

100 Volt — BP — C1812 SIZE (MILITARY CDR34)

2,200 F,J,K C1812N222(3)1G(4)C CDR34BP222B(3)W(4) 2,400 F,J,K C1812N242(3)1G(4)C CDR34BP242B(3)W(4) 2,700 F,J,K C1812N272(3)1G(4)C CDR34BP272B(3)W(4) 3,000 F,J,K C1812N302(3)1G(4)C CDR34BP302B(3)W(4) 3,300 F,J,K C1812N332(3)1G(4)C CDR34BP332B(3)W(4) 3,600 F,J,K C1812N362(3)1G(4)C CDR34BP362B(3)W(4) 3,900 F,J,K C1812N392(3)1G(4)C CDR34BP392B(3)W(4) 4,300 F,J,K C1812N432(3)1G(4)C CDR34BP432B(3)W(4) 4,700 F,J,K C1812N472(3)1G(4)C CDR34BP472B(3)W(4)

50 Volt — BP — C1812 SIZE (MILITARY CDR34)

5,100 F,J,K C1812N512(3)5G(4)C CDR34BP512A(3)W(4) 5,600 F,J,K C1812N562(3)5G(4)C CDR34BP562A(3)W(4) 6,200 F,J,K C1812N622(3)5G(4)C CDR34BP622A(3)W(4) 6,800 F,J,K C1812N682(3)5G(4)C CDR34BP682A(3)W(4) 7,500 F,J,K C1812N752(3)5G(4)C CDR34BP752A(3)W(4) 8,200 F,J,K C1812N822(3)5G(4)C CDR34BP822A(3)W(4) 9,100 F,J,K C1812N912(3)5G(4)C CDR34BP912A(3)W(4) 10,000 F,J,K C1812N103(3)5G(4)C CDR34BP103A(3)W(4) MIL-PRF-55681 MAXIMUM INDIVIDUAL PACKAGING QUANTITIES ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP/MIL-PRF-55681 Established Reliability RATINGS & PART NUMBER REFERENCE (1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification. (2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”) (3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF, D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above. Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metal- ization. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly. MIL-PRF-55681 chips available in 7" reels only. Ceramic Surface Mount

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only (+) (–) Embossed Carrier Embossment Top T ape Thickness .10mm (.004") Max Thickness 8mm ±.30 (.315 ±.012") or 12mm ±.30 (.472 ±.012") 178mm (7.00") or 330mm (13.00") 8mm (0.315") or or 330mm (13.0") QUANTITIES PACKAGED PER REEL Case Code Tape KEMET EIA Width-mm 7" Reel* 13" Reel* R 2012-12 8 2,500 10,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 U 6032-15 12 1,000 5,000 W 7343-15 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E 7260-38 12 500 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Packaging * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 KEMET offers Multilayer Ceramic Chip Capacitors packaged in 8mm and 12mm plastic tape on 7" and 13" reels in accordance with EIA standard 481-1: Taping of surface mount components for automatic handling. This packaging system is compatible with all tape fed automatic pick and place systems. See page 78 for details on reeling quantities for commercial chips and page 87 for MIL-PRF-55681 chips. CERAMIC CHIP CAPACITORS Packaging Information Tape & Reel Packaging 8mm ±.30 (.315 ±.012") or 12mm ±.30 (.472 ±.012") 178mm (7.00") or 330mm (13.00") Anti-Static Reel Embossed Carrier* 0402 and 0603 case sizes available on punched paper only. Embossment Anti-Static Cover Tape (.10mm (.004") Max Thickness) Chip Orientation in Pocket (except 1825 Commercial, and 1825 & 2225 Military) * Punched paper carrier used for 0402 and 0603 case size. g handling. This packaging system is compatible with all tape fed automatic pick and place systems. See page 81 for details on reeling quantities for commercial chips and page 90 for MIL-PRF-55681 chips. KEMET X C G Z Y Grid placement courtyard Z 2.14 2.78 3.30 4.50 4.50 5.90 5.90 7.00 7.00 G 0.28 0.68 0.70 1.50 1.50 2.30 2.30 3.30 3.30 X 0.74 1.08 1.60 2.00 2.90 3.70 6.90 5.50 6.80 Y(ref) 0.93 1.05 1.30 1.50 1.50 1.80 1.80 1.85 1.85 C(ref) 1.21 1.73 2.00 3.00 3.00 4.10 4.10 5.15 5.15 Z 3.18 3.70 4.90 4.90 G 0.68 0.70 1.50 1.50 X 0.80 1.10 1.40 2.00 Y(ref) 1.25 1.50 1.70 1.70 Smin 1.93 2.20 3.20 3.20 Wave SolderReflow Solder Calculation Formula Z = Lmin + 2Jt + Tt G = Smax - 2Jh -Th X = Wmin + 2Js + Ts Tt, Th, Ts = Combined tolerances 0402 0603 0805 1206 1210 1812 1825 2220 2225 Dimension Not Recommended Not Recommended /MT67 /MT88 /MT71/MT114/MT105/MT100 /MT80/MT108/MT97/MT99/MT101/MT109/MT101/MT110/MT116 /MT67/MT111/MT117/MT114/MT116/MT121/MT97/MT114/MT100 /MT71/MT89 /MT90 SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM Packaging

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165/H11034to 180/H11034from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A 0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not pro- trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size D 0 EP 0 P2 T Max T 1 Max and +0.10 -0.0 +0.004, -0.0) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B 1 Max. D 1 Min. F P 1 R Min. T 2 Max W A 0B0K0 Note 1 Note 2 Note 3 Note 4 (4 mm) TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 20° 20° Maximum component rotation. Typical component center line Punched Carrier (Paper T ape) Configuration (Ceramic Chips Only): T able 1: 8 & 12mm Punched T ape (Metric Dimensions Will Govern) Variable Dimensions - Millimeters (Inches) Note: 1. A0, B0 and T determined by the maximum dimensions to the ends of the terminals extending from the body and/or the body dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A0, B0 and T) must be within 0.05mm (.002) minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20 degrees (see sketches A and B). 2. Tape with components shall pass around radius "R" without damage. 3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum. 8mm and 12mm 1.5 +0.10, -0.0 (.059 +0.004, -0.0) 1.75 ±0.10 (.069 ±0.004) 4.0 ± 0.10 (.157 ± 0.004) 2.0 ± 0.05 (.079 ± 0.002) 0.10 (.004) Max. 0.75 (.030) Min. 0.75 (.030) Min. 25 (.984) See Note 2 Table 1 T ape Size D0 P0E P2 T1 G1 G2 R Min. 8mm Pitch 2.0 ± 0.10 (.079 ±.004) See Require- ments Section 3.3 (d) 3.5 ± 0.05 (.138 ± .002) 8.0 ± 0.3 (.315 ± 0.012) See Note 1 Table 1 1.1mm (.043) Max. for Paper Base Tape and 1.6mm (.063) Max. for Non- Paper Base Compositions. See Note 3. T ape Size P1 WF A0B0 T 8mm 4.0 ± 0.10 (0.157 ± .004) 12mm 4.0 ± 0.10 (0.157 ± .004) 12mm Double Pitch 8.0 ± 0.10 (0.315 ± .004) 12.0 ± 0.3 (.472 ± .012) 5.5 ± 0.05 (.217 ± .002) T able 1: 8 & 12mm Punched T ape (Metric Dimensions Will Govern) Constant Dimensions - Millimeters (Inches) Sketch B: Max. Component Rotation - Front Cross Sectional View Sketch C: Component Rotation - Top View P2D0 F E W Center lines of cavity 10 pitches cumulative tolerance on tape ±0.2 (±0.008) Top Tape Cover T User Direction of Feed Max. Cavity Size See Note 1 Table 1 Bottom Tape Cover R (Min.) Sketch A: Bending Radius See Note 2 Table 1 CERAMIC CHIP CAPACITORS Packaging Information

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 CERAMIC CHIP CAPACITORS Packaging Information CAPACITOR MARKING TABLE (Marking Optional - Not Available for 0402 Size or Y5V Dielectric) A B C D E F G H J K L M N P Q R S T U V W X Y Z a b d e f m n t y 0.10 0.11 0.12 0.13 0.15 0.16 0.18 0.20 0.22 0.24 0.27 0.30 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 0.75 0.82 0.91 0.25 0.35 0.40 0.45 0.50 0.60 0.70 0.80 0.90 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 2.5 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 250 350 400 450 500 600 700 800 900 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 2500 3500 4000 4500 5000 6000 7000 8000 9000 10,000 11,000 12,000 13,000 15,000 16,000 18,000 20,000 22,000 24,000 27,000 30,000 33,000 36,000 39,000 43,000 47,000 51,000 56,000 62,000 68,000 75,000 82,000 91,000 25,000 35,000 40,000 45,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 150,000 160,000 180,000 200,000 220,000 240,000 270,000 300,000 330,000 360,000 390,000 430,000 470,000 510,000 560,000 620,000 680,000 750,000 820,000 910,000 250,000 350,000 400,000 450,000 500,000 600,000 700,000 800,000 900,000 Alpha Character Numeral 9 01 2 3 4 5 Capacitance (pF) For Various Numeral Identifiers 1,000,000 1,100,000 1,200,000 1,300,000 1,500,000 1,600,000 1,800,000 2,000,000 2,200,000 2,400,000 2,700,000 3,000,000 3,300,000 3,600,000 3,900,000 4,300,000 4,700,000 5,100,000 5,600,000 6,200,000 6,800,000 7,500,000 8,200,000 9,100,000 2,500,000 3,500,000 4,000,000 4,500,000 5,000,000 6,000,000 7,000,000 8,000,000 9,000,000 10,000,000 11,000,000 12,000,000 13,000,000 15,000,000 16,000,000 18,000,000 20,000,000 22,000,000 24,000,000 27,000,000 30,000,000 33,000,000 36,000,000 39,000,000 43,000,000 47,000,000 51,000,000 56,000,000 62,000,000 68,000,000 75,000,000 82,000,000 91,000,000 25,000,000 35,000,000 40,000,000 45,000,000 50,000,000 60,000,000 70,000,000 80,000,000 90,000,000 Laser marking is available as an extra-cost option for most KEMET ceramic chips. Such marking is two sided, and includes a K to identify KEMET, followed by two characters (per EIA-198 - see table below) to identify the capacitance value. Note that marking is not available for size 0402 nor for any Y5V chip. In addition, the 0603 marking option is limited to the K only. Example shown is 1,000 pF capacitor.KA3 Table 2 – Capacitance Values Available In Bulk Cassette Packaging 0402 0603 0805 All All C0G X7R Y5V All All 109 109 109 221 221 221 221 221 104 104 All All 181 331 102 392 103 273 104 104 224 224 Case Size Dielectric Voltage Min. Cap Value Max. Cap Value All All 200 100 200 100 Terminations: KEMET nickel barrier layer with a tin overplate. 0.3 0.7 0.75 EIA Size Code Length L Width W Thickness T Bandwidth B Minimum Separation S Metric Size Code Number of Pcs/Cassette 50,000 15,000 10,000 0402 0603 0805 1.0 ± 0.05 1.6 ± 0.07 2.0 ± 0.10 0.5 ± 0.05 0.8 ± 0.07 1.25 ± 0.10 0.5 ± .05 0.8 ± .07 0.6 ± .10 0.2 to 0.4 0.2 to 0.5 0.5 to 0.75 1005 1608 2012 Table 1 – Capacitor Dimensions for Bulk Cassette Packaging – Millimeters Unit: mm * Reference 110 ± 0.7 31.5 ± 0 0.2 36 ± 0 0.2 19.0* 5.0* 10* 53.3* 6.8 ± 0.1 8.8 ± 0.1 12.0 ± 0.1 3.0 ± 0 0.2 2.0 ± 0.1 01.5 ± 0 0.1 Bulk Cassette Packaging (Ceramic Chips only) (Meets Dimensional Requirements IEC-286-6 and EIAJ 7201) Packaging

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com World Sales Headquarters KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 Phone: 864-963-6300 Europe KEMET Electronics S.A. 1-3, Avenue de la Paix P.O.B. 76 CH-1211 Geneva 20, Switzerland Phone: 41-22-715-0100 Asia KEMET Electronics Marketing PTE Ltd.

101 Thomson road, #23-03

Singapore, 307591, Singapore Phone: 65-6353-6636 KEMET Electronics Asia Ltd.

30 Canton Road, Room 1512

Tsimshatshui, Kowloon Hong Kong Phone: 852-2305-1168 KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product i mprovement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET capacitors in potential circuit designs.