T405-XXXB STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Table 1: Main Features

DESCRIPTION

Based on ST’s Snubberless / Logic level technol- ogy providing high commutation performances, the T4 series is suitable for use on AC inductive loads. They are recommended for applications using universal motors, electrovalves.... such as kitchen aid equipments, power tools, dishwashers,... Available in a fully insulated package, the T4...- ...W version complies with UL standards (ref. E81734). Symbol Value Unit I T(RMS) 4A VDRM/VRRM 600 to 800 V IGT (Q1) 5 to 35 mA T4 Series 4A TRIACS REV. 7January 2006 SNUBBERLESS™ & LOGIC LEVEL Table 2: Order Codes Part Number Marking T405-xxxB See page table 8 on page 9 T405-xxxB-TR T405-xxxH T405-xxxT T405-xxxW T410-xxxB T410-xxxB-TR T410-xxxH T4105-xxxT T410-xxxW T435-xxxB T435-xxxB-TR T435-xxxH T435-xxxT T435-xxxW DPAK (T4-B) G A1 A2A1 G TO-220AB (T4-T) ISOWATT220AB (T4-W) G IPAK (T4-H) G A2A1 G

Table 3: Absolute Maximum Ratings Tables 4: Electrical Characteristics (Tj = 25°C, unless otherwise specified) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) IPAK/DPAK/ TO-220AB Tc = 110°C ISOWATT220AB Tc = 105°C ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) F = 50 Hz t = 20 ms 30 A F = 60 Hz t = 16.7 ms 31 I²tI ²t Value for fusing tp = 10 ms 5.1 A²s dI/dt Critical rate of rise of on-state cur- rent IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz Tj = 125°C 50 A/µs IGM Peak gate current tp = 20 µs T j = 125°C 4A PG(AV) Average gate power dissipation Tj = 125°C 1W Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C Symbol Test Conditions Quadrant Unit T405 T410 T435 IGT (1) VD = 12 V RL = 30 Ω I - II - III MAX. 5 10 35 mA VGT I - II - III MAX. 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C I - II - III MIN. 0.2 V IH (2) I T = 100 mA MAX. 10 15 35 mA IL IG = 1.2 IGT I - III MAX. 10 25 50 mA II 15 30 60 dV/dt (2) VD = 67 %VDRM gate open Tj = 125°C MIN. 20 40 400 V/µs (dI/dt)c (2) (dV/dt)c = 0.1 V/µs Tj = 125°C MIN. 1.8 2.7 - A/ms(dV/dt)c = 10 V/µs Tj = 125°C 0.9 2.0 - Without snubber Tj = 125°C -- 2 . 5 Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1.

Table 5: Static Characteristics Table 6: Thermal resistance Symbol Test Conditions Value Unit VT (2) I TM = 5.5 A tp = 380 µs T j = 25°C MAX. 1.56 V Vto (2) Threshold voltage Tj = 125°C MAX. 0.89 V Rd (2) Dynamic resistance Tj = 125°C MAX. 120 m Ω IDRM IRRM VDRM = VRRM Tj = 25°C MAX. 5µ A Tj = 125°C 1m A Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1. Symbol Parameter Value Unit Rth(j-c) Junction to case (AC) IPAK / DPAK / TO-220AB 2.6 °C/W ISOWATT220AB 4.0 Rth(j-a) Junction to ambient S = 0.5 cm² DPAK 70 °C/WTO-220AB / ISOWATT220AB 60 IPAK 100 S = Copper surface under tab.

Figure 12: Ordering Information Scheme Table 7: Product Selector Part Number Voltage (xxx) Sensitivity Type Package600 V 700 V 800 V T405-xxxB X X X 5 mA Logic level DPAK T405-xxxH X X X 5 mA Logic level IPAK T405-xxxT X X X 5 mA Logic level TO-220AB T405-xxxW X X X 5 mA Logic level ISOWATT220AB T410-xxxB X X X 10 mA Logic level DPAK T410-xxxH X X X 10 mA Logic Level IPAK T410-xxxT X X X 10 mA Logic Level TO-220AB T410-xxxW X X X 10 mA Logic Level ISOWATT220AB T435-xxxB X X X 35 mA Snubberless DPAK T435-xxxH X X X 35 mA Snubberless IPAK T435-xxxT X X X 35 mA Snubberless TO-220AB T435-xxxW X X X 35 mA Snubberless ISOWATT220AB T 4 05 - 600 B (-TR) Triac series Current Sensitivity Voltage Package Packing mode 4 = 4A 05 = 5mA 10 = 10mA 35 = 35mA 600 = 600V 700 = 700V 800 = 800V B = DPAK H = IPAK T = TO-220AB W = ISOWATT220AB Blank = Tube -TR = Tape & reel

Figure 17: TO-220AB Package Mechanical Data C F Ø I L A B e M REF. DIMENSIONS Millimeters Inches A 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 M 2.60 0.102 Table 8: Ordering Information Ordering type Marking Package Weight Base qty Delivery mode T4xx-yyyB T4 xxyy DPAK 0.3 g 75 Tube T4xx-yyyB-TR T4 xxyy DPAK 0.3 g 2500 Tape & reel T4xx-yyyH T4 xxyy IPAK 0.4 g 75 Tube T4xx-yyyT T4xx yyyT TO-220AB 2.3 g 50 Tube T4xx-yyyB T4xxyyyW ISOWATT220AB 2.1 g 50 Tube Note: xxx = voltage, yy = sensitivity Table 9: Revision History Date Revision Description of Changes Jun-2003 5 Last update. 25-Mar-2005 6 Layout update. No content change. 25-Jan-2005 7 Markings changed in Table 8

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publicati on are subject to change without notice. This publication supersedes and replac es all information previously supplied. STMicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectro nics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Ital y - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America