T3V3LCS3 DIODES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 350 Watts Peak Pulse Power (tp = 8x20 μs)
  • IEC 61000-4-2 (ESD): Air – 15kV, Contact – 8kV
  • IEC 61000-4-4 (EFT): 40A – 5/50ns
  • IEC 61000-4-5 (Surge): 24A, 8/20 μs – Level 2(Line-Gnd) & Level 3(Line-Line)
  • Low Capacitance, typ. = 3 pF
  • Unidirectional Configuration
  • Lead Free/RoHS Compliant (Note 4)
  • “Green” Device (Note 5) Mechanical Data
  • Case: SOD-323
  • Case Material: Molded Plasti c, “Green” Molding Compound, Note 5. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020
  • Terminals: Matte Tin Finish annealed over Alloy 42 leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208
  • Polarity: Cathode Band, See Page 2
  • Marking Information: See Page 2
  • Ordering Information: See Page 2
  • Weight: 0.004 grams (approximate) Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Peak Pulse Power (tp = 8x20μs) (Note 7) TA = 25°C P pk 350 W Thermal Characteristics Characteristic Symbol Value Unit Thermal Resistance, Junction to Ambient (Note 7) TA = 25°C RθJA 425 °C/W Operating and Storage Temperature Range TJ, TSTG -55 to +150 °C Electrical Characteristics @TA = 25°C unless otherwise specified (Note 8) Reverse Standoff Voltage Breakdown Voltage VBR @ IT Test Current Max. Reverse Leakage @ VRWM (Note 6) Max. Clamping Voltage @ Ipp = 1A (Note 3) Max. Clamping Voltage VC @ IPP (Note 3) Typical Total Capacitance CT (Note 1) VRWM (V) Min (V) Max (V) IT (mA) I R (μA) V C (V) V C (V) I PP (A) (pF) 3.3 4.0 ⎯ 1.0 5 7 19 20 3 Notes: 1. V R = 0V, f = 1MHz. 2. tp = 8x20μs. 3. Clamping voltage value is based on an 8x20 μs peak pulse current (Ipp) waveform (see figure 1). 4. No purposefully added lead. 6. Short duration pulse test used to minimize self-heating effect. 7. Device mounted on FR-4 PC board with suggested pad layout, which can be found on page 3 or on our website at http://www.diodes.com/datasheets/ap02001.pdf. 8. Positive potential is applied from pin 1 to pin 2. Top View Device Schematic 1 2 TOP VIEW

Document number: DS31104 Rev. 8 - 4 2 of 4 www.diodes.com January 2010 © Diodes Incorporated T3V3LCS3 DISCONTINUED 01/13/2010 t, TIME ( s) Fig. 1 Pulse Waveform μ 20 40 60 100 I , PEAK PULSE CURRENT (%I )Pp pP V , REVERSE VOLTAGE (V) Fig. 2 Typical Total Capacitance vs. Reverse Voltage R C , TOTAL CAPACITANCE (pF)T 0 0.5 1 1.5 2 2.5 3 3.5 f = 1MHz t , PULSE DURATION (µs) Fig. 3 Max. Peak Pulse Power vs. Power Duration d 100 1,000 10,000 1 10 100 1,000 P , PEAK PULSE POWER(W)D 350W 8x20µs Waveform Ordering Information (Note 9) Part Number Case Packaging T3V3LCS3-7 SOD-323 3000/Tape & Reel Marking Information DE = Product Type Marking Code DE

Document number: DS31104 Rev. 8 - 4 3 of 4 www.diodes.com January 2010 © Diodes Incorporated T3V3LCS3 DISCONTINUED 01/13/2010 Package Outline Dimensions Suggested Pad Layout SOD-323 Dim Min Max A 0.25 0.35 B 1.20 1.40 C 2.30 2.70 H 1.60 1.80 J 0.00 0.10 K 1.0 1.1 L 0.20 0.40 M 0.10 0.15 α 0° 8° All Dimensions in mm Dimensions Value (in mm) Z 3.75 G 1.05 X 0.65 Y 1.35 C 2.40 K L M J C H BA Z X C GY

Document number: DS31104 Rev. 8 - 4 4 of 4 www.diodes.com January 2010 © Diodes Incorporated T3V3LCS3 DISCONTINUED 01/13/2010 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. Diodes Incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does Di odes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Inco rporated products for any unintended or una uthorized application, Customers shall i ndemnify and hold Diodes Incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporate d and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com