T322B106J006AS

T322F226K050AS KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1&5 T322 & T323 (CX01 & CX05) SERIES 42 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 The KEMET T322 AND T323 (CX01 & CX05) Series offers a com- plete line of extended range molded solid tantalum capacitors designed specifically for high speed automatic insertion applications. These capacitors offer an extremely high capacitance-to-volume ratio while still maintaining excellent performance characteristics. Supplied in six axial lead tubular case sizes, these capacitors are ideally suited for use in printed wiring boards and all applications requiring a high degree of packaging density and can be supplied in bulk packaging or lead-taped on reels. The T322/T323 Series dimensions and tight lead wire-to-body con- centricity permit installation by the same automatic insertion equip- ment used for diodes and resistors. Available in working voltages of 2, 4, 6, 10, 15, 20, 25, 35, and 50 volts. Operating temperature range -55°C to +85°C at full rated voltage and with 2⁄3 85°C rated voltage at 125°C. The gold color epoxy utilized permits laser marking with outstanding permanency and legibility. T323 Series capacitors are qualified under MIL-PRF-49137/1 & 5 as Military Style CX01 & CX05. Typical applications include decoupling, blocking, bypassing and fil- tering in commercial computers, data processing, communications, and other electronic equipment. The low ESR/impedance at high fre- quencies offered by this capacitor is especially suitable for decou- pling required by high speed computers.

• CAPACITANCE/VOLTAGE RANGE: 0.1-330µF, 2-50 Volts.
• CAPACITANCE TOLERANCE: Available in standard EIA nominal values with ±20%, ±10% and ±5% toler- ance.
• DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi- tional description.
• DC LEAKAGE CURRENT: Each corresponding part number table lists maximum leakage current for each capacitor on pages 44 through 48. See Application Notes Section, page 76 for additional description.
• RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, page 76 & 77 for description.
• AC RIPPLE VOLTAGE: Permissible AC ripple voltage is related to equivalent series resistance (ESR) and power dissipation capability. Maximum power dissipation for each case size is listed in Table below. For additional description see page 79.
• IMPEDANCE and ESR: See Application Notes Section, pages 77 & 78 for description. Reference ESR values are shown in adjoining column, this page.
• ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 80, 81 and 82.
• LEAD MATERIAL: Solder coated steel core with copper ply per MIL-STD-1276.
• LEAD TAPE and REEL: Reeling per specification RS-296. See pages 71 and 73 for additional infor- mation. PERFORMANCE CHARACTERISTICS Case Power Dissipation Size (max.) @ 25 °C (watts) A .060 B .070 C .080 D .090 E .100 F. 1 1 0 Maximum Power Dissipation Capability @ 25°C T322 ESR (OHMS) at 100 kHz @ +25°C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of these values for any particular T322 Series product.) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 13.0 13.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 3.7 3.7 3.0 3.0 2.0 2.0 1.8 1.8 1.6 1.6 0.9 0.9 0.9 0.9 0.7 13.0 13.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 3.7 3.7 2.7 2.7 2.1 2.1 1.7 1.7 1.3 1.3 1.0 1.0 0.8 0.8 0.6 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 4.0 4.0 3.2 3.2 2.5 2.5 2.0 2.0 1.6 1.6 1.3 1.3 1.0 1.0 0.8 0.8 0.6 10.0 10.0 9.0 9.0 7.0 7.0 5.5 5.5 4.5 4.5 3.6 3.6 2.9 2.9 2.3 2.3 1.8 1.8 1.4 1.4 1.2 1.2 0.9 0.9 0.6 16.0 14.0 12.0 12.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 4.0 4.0 3.1 3.1 2.5 2.5 2.0 2.0 1.5 1.5 1.2 1.2 1.0 1.0 0.8 26.0 26.0 21.0 21.0 17.0 17.0 15.0 15.0 13.0 13.0 10.0 10.0 8.0 8.0 6.0 6.0 5.0 5.0 4.0 4.0 3.0 3.0 2.5 2.5 2.0 2.0 1.6 1.6 1.3 1.3 1.0 1.0 0.8 26.0 26.0 21.0 21.0 17.0 17.0 15.0 15.0 13.0 13.0 10.0 10.0 8.0 8.0 5.0 5.0 3.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 1.6 1.6 1.2 1.2 1.0 1.0 Cap. µF Volt Volt Volt Volt Volt Volt Volt

TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES T322/T323 Tantalum Molded / Axial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 43 CAPACITOR OUTLINE DRAWINGS DL B 1.50±.250 (38.10±6.35) 1.50±.250 (38.10±6.35) DIMENSIONS — INCHES & (MILLIMETERS) CASE SIZE D (MAX) L (MAX) W T322 & T323 ORDERING INFORMATION T 32X A 474 M 035 A S — C* TANTALUM SERIES Sub-Miniature, Molded, Polar, Solid Tantalum, Insert appropriate number to replace letter “X” — 322 or 323 (CX01, CX05). CASE SIZE A, B, C, D, E, or F CAPACITANCE IN PICOFARADS First two digits are significant figures. Third digit is number of zeros following. SPECIFICATION (when necessary — Reeling Per EIA Specification RS-296 LEAD MATERIAL S — Standard FAILURE RATE LEVEL A — Not Applicable VOLTAGE RATING CAPACITANCE TOLERANCE *M — ±20% *K — ±10% *J — ±5% * M & K only tolerances available for T323 Series. MIL-PRF-49137/5 MILITARY ORDERING INFORMATION CX 05 D 225 K TYPE Capacitor, Fixed, Solid Tantalum, Molded, Non-hermetically Sealed STYLE 01, 05 (T323) A, B, C, and D VOLTAGE CAPACITANCE TOLERANCE Symbol Capacitance Tolerance Percent (±) K1 0 M2 0 CAPACITANCE TOLERANCE The nominal capacitance value, expressed in picofarads (pF), is identified by a three-digit number; the first two digits represent sig- nificant figures and the last digit specifies the number of zeros to follow. Rated (85°C) Surge (85°C) Symbol Volts, DC Volts, DC D 6 8.0 F 10 13.0 H 15 20.0 J 20 26.0 K 25 32.0 M 35 46.0 N 50 65.0 Capacitance Value (pF), Capacitance Tolerance Polarity, Voltage, KEMET Date Code (Year, Week) 105M +25 K 0324 CAPACITOR MARKING W *Part Number Example: T322A474M035AS (14 digits – no spaces) Effective September 30, 2005, the KEMET T322 Series is RoHS compliant. T – 100% Tin

MAX. DISSIPATION CAPACITANCE D.C. FACTOR CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER 2 VOLT RATING AT 85°C — 1.3 VOLT RATING AT 125°C 6.8 A 5,10,20 T322A685(1 )002AS 0.5 10 8.2 A 5,10,20 T322A825(1 )002AS 0.5 10 10.0 A 5,10,20 T322A106(1 )002AS 0.5 10 12.0 B 5,10,20 T322B126(1 )002AS 0.5 10 15.0 B 5,10,20 T322B156(1 )002AS 0.5 10 18.0 B 5,10,20 T322B186(1 )002AS 0.5 10 22.0 B 5,10,20 T322B226(1 )002AS 0.5 10 27.0 B 5,10,20 T322B276(1 )002AS 0.5 10 33.0 B 5,10,20 T322B336(1 )002AS 0.5 10 39.0 C 5,10,20 T322C396(1 )002AS 0.6 10 47.0 C 5,10,20 T322C476(1 )002AS 0.8 10 56.0 C 5,10,20 T322C566(1 )002AS 0.9 10 68.0 C 5,10,20 T322C686(1 )002AS 1.1 10 4 VOLT RATING AT 85°C — 2.7 VOLT RATING AT 125°C 4.7 A 5,10,20 T322A475(1 )004AS 0.5 8 5.6 A 5,10,20 T322A565(1 )004AS 0.5 8 6.8 A 5,10,20 T322A685(1 )004AS 0.5 8 8.2 B 5,10,20 T322B825(1 )004AS 0.5 8 10.0 B 5,10,20 T322B106(1 )004AS 0.5 8 12.0 B 5,10,20 T322B126(1 )004AS 0.5 8 15.0 B 5,10,20 T322B156(1 )004AS 0.5 8 18.0 B 5,10,20 T322B186(1 )004AS 0.6 8 22.0 B 5,10,20 T322B226(1 )004AS 0.7 8 27.0 C 5,10,20 T322C276(1 )004AS 0.9 8 33.0 C 5,10,20 T322C336(1 )004AS 1.1 8 39.0 C 5,10,20 T322C396(1 )004AS 1.2 8 47.0 C 5,10,20 T322C476(1 )004AS 1.5 8 56.0 D 5,10,20 T322D566(1 )004AS 1.8 8 68.0 D 5,10,20 T322D686(1 )004AS 2.2 8

6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C

3.3 A 5,10,20 T322A335(1 )006AS 0.5 4 3.9 A 5,10,20 T322A395(1 )006AS 0.5 4 4.7 A 5 T322A475J006AS 0.5 4 4.7 A 10 T322A475K006AS 0.5 4 CX05D475K T323A475K006AS 4.7 A 20 T322A475M006AS 0.5 4 CX05D475M T323A475M006AS 5.6 B 5 T322B565J006AS 0.5 4 5.6 B 10 T322B565K006AS 0.5 4 CX01D565K T323B565K 006AS 5.6 B 20 T322B565M006AS 0.5 4 CX01D565M T323B565M006AS 6.8 B 5 T322B685J006AS 0.5 6 6.8 B 10 T322B685K006AS 0.5 6 CX01D685K T323B685K006AS 6.8 B 20 T322B685M006AS 0.5 6 CX01D685M T323B685M006AS 8.2 B 5 T322B825J006AS 0.5 6 8.2 B 10 T322B825K006AS 0.5 6 CX01D825K T323B825K 006AS 8.2 B 20 T322B825M006AS 0.5 6 CX01D825M T323B825M006AS 10.0 B 5 T322B106J006AS 0.5 6 10.0 B 10 T322B106K006AS 0.5 6 CX01D106K T323B106K006AS 10.0 B 20 T322B106M006AS 0.5 6 CX01D106M T323B106M006AS 12.0 B 5 T322B126J006AS 0.6 6 12.0 B 10 T322B126K006AS 0.6 6 CX01D126K T323B126K 006AS 12.0 B 20 T322B126M006AS 0.6 6 CX01D126M T323B126M006AS 15.0 B 5 T322B156J006AS 0.7 6 15.0 B 10 T322B156K006AS 0.7 6 CX05D156K T323B156K006AS 15.0 B 20 T322B156M006AS 0.7 6 CX05D156M T323B156M006AS

18.0 C 5,10,20 T322C186(1

)006AS 0.9 6 22.0 C 5,10,20 T322C226(1 )006AS 1.1 6 27.0 C 5,10,20 T322C276(1 )006AS 1.3 6 33.0 C 5 T322C336J006AS 1.5 6 33.0 C 10 T322C336K006AS 1.5 6 CX05D336K T323C336K006AS 33.0 C 20 T322C336M006AS 1.5 6 CX05D336M T323C336M006AS

39.0 D 5,10,20 T322D396(1

)006AS 1.9 6 47.0 D 5 T322D476J006AS 2.3 6 47.0 D 10 T322D476K006AS 2.3 6 CX05D476K T323D476K006AS 47.0 D 20 T322D476M006AS 2.3 6 CX05D476M T323D476M006AS

56.0 D 5,10,20 T322D566(1

)006AS 2.7 6 68.0 D 5,10,20 T322D686(1 )006AS 3.3 6 TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES 44 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Facelines indicate preferred part types and values. CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5

MAX. DISSIPATION CAPACITANCE D.C. FACTOR CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER

6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C (Cont’d)

82.0 E 5,10,20 T322E826(1 )006AS 3.9 8 100.0 E 5,10,20 T322E107(1 )006AS 4.8 8 120.0 E 5,10,20 T322E127(1 )006AS 5.0 8 150.0 E 5,10,20 T322E157(1 )006AS 5.0 8 180.0 E 5,10,20 T322E187(1 )006AS 8.6 8 220.0 E 5,10,20 T322E227(1 )006AS 10.0 8 270.0 F 5,10,20 T322F277(1 )006AS 10.0 8 330.0 F 5,10,20 T322F337(1 )006AS 10.0 8

10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C

2.2 A 5,10,20 T322A225(1 )010AS 0.5 4 2.7 A 5,10,20 T322A275(1 )010AS 0.5 4 3.3 A 5 T322A335J010AS 0.5 4 3.3 A 10 T322A335K010AS 0.5 4 CX05F335K T323A335K010AS 3.3 A 20 T322A335M010AS 0.5 4 CX05F335M T323A335M010AS

3.9 B 5,10,20 T322B395(1

)010AS 0.5 4 4.7 B 5,10,20 T322B475(1 )010AS 0.5 4 5.6 B 5,10,20 T322B565(1 )010AS 0.5 4 6.8 B 5,10,20 T322B685(1 )010AS 0.5 6 8.2 B 5,10,20 T322B825(1 )010AS 0.7 6 10.0 B 5 T322B106J010AS 0.8 6 10.0 B 10 T322B106K010AS 0.8 6 CX05F106K T323B106K010AS 10.0 B 20 T322B106M010AS 0.8 6 CX05F106M T323B106M010AS

12.0 C 5,10,20 T322C126(1

)010AS 1.0 6 15.0 C 5,10,20 T322C156(1 )010AS 1.2 6 18.0 C 5,10,20 T322C186(1 )010AS 1.4 6 22.0 C 5 T322C226J010AS 1.5 6 22.0 C 10 T322C226K010AS 1.5 6 CX05F226K T323C226K010AS 22.0 C 20 T322C226M010AS 1.5 6 CX05F226M T323C226M010AS 27.0 D 5 T322D276J010AS 2.2 6 27.0 D 10 T322D276K010AS 2.2 6 CX05F276K T323D276K010AS 27.0 D 20 T322D276M010AS 2.2 6 CX05F276M T323D276M010AS 33.0 D 5 T322D336J010AS 2.6 6 33.0 D 10 T322D336K010AS 2.6 6 CX05F336K T323D336K010AS 33.0 D 20 T322D336M010AS 2.6 6 CX05F336M T323D336M010AS 39.0 D 5 T322D396J010AS 3.1 6 39.0 D 10 T322D396K010AS 3.1 6 CX05F396K T323D396K010AS 39.0 D 20 T322D396M010AS 3.1 6 CX05F396M T323D396M010AS 47.0 D 5 T322D476J010AS 3.8 6 47.0 D 10 T322D476K010AS 3.8 6 CX05F476K T323D476K010AS 47.0 D 20 T322D476M010AS 3.8 6 CX05F476M T323D476M010AS

56.0 E 5,10,20 T322E566(1

)010AS 4.4 6 68.0 E 5,10,20 T322E686(1 )010AS 5.0 6 82.0 E 5,10,20 T322E826(1 )010AS 5.0 8 100.0 E 5,10,20 T322E107(1 )010AS 8.0 8 120.0 E 5,10,20 T322E127(1 )010AS 9.6 8 150.0 E 5,10,20 T322E157(1 )010AS 10.0 8 180.0 F 5,10,20 T322F187(1 )010AS 10.0 8 220.0 F 5,10,20 T322F227(1 )010AS 10.0 8

15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C

1.5 A 5,10,20 T322A155(1 )015AS 0.5 4 1.8 A 5,10,20 T322A185(1 )015AS 0.5 4 2.2 A 5 T322A225J015AS 0.5 4 2.2 A 10 T322A225K015AS 0.5 4 CX05H225K T323A225K015AS 2.2 A 20 T322A225M015AS 0.5 4 CX05H225M T323A225M015AS

2.7 B 5,10,20 T322B275(1

)015AS 0.5 4 3.3 B 5,10,20 T322B335(1 )015AS 0.5 4 3.9 B 5,10,20 T322B395(1 )015AS 0.5 4 4.7 B 5,10,20 T322B475(1 )015AS 0.6 4 5.6 B 5,10,20 T322B565(1 )015AS 0.7 4 6.8 B 5 T322B685J015AS 0.8 6 6.8 B 10 T322B685K015AS 0.8 6 CX05H685K T323B685K015AS 6.8 B 20 T322B685M015AS 0.8 6 CX05H685M T323B685M015AS

8.2 C 5,10,20 T322C825(1

)015AS 1.0 6 10.0 C 5,10,20 T322C106(1 )015AS 1.2 6 12.0 C 5,10,20 T322C126(1 )015AS 1.4 6 15.0 C 5 T322C156J015AS 1.5 6 15.0 C 10 T322C156K015AS 1.5 6 CX05H156K T323C156K015AS 15.0 C 20 T322C156M015AS 1.5 6 CX05H156M T323C156M015AS TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES T322/T323 Series Tantalum Molded / Axial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 45 CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Facelines indicate preferred part types and values.

MAX. DISSIPATION CAPACITANCE D.C. FACTOR CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER

15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C (Cont’d)

18.0 D 5,10,20 T322D186(1 )015AS 2.2 6 22.0 D 5 T322D226J015AS 2.6 6 22.0 D 10 T322D226K015AS 2.6 6 CX05H226K T323D226K015AS 22.0 D 20 T322D226M015AS 2.6 6 CX05H226M T323D226M015AS

27.0 D 5,10,20 T322D276(1

)015AS 3.2 6 33.0 D 5 T322D336J015AS 4.0 6 33.0 D 10 T322D336K015AS 4.0 6 CX05H336K T323D336K015AS 33.0 D 20 T322D336M015AS 4.0 6 CX05H336M T323E336M015AS

39.0 E 5,10,20 T322E396(1

)015AS 4.7 6 47.0 E 5,10,20 T322E476(1 )015AS 5.0 6 56.0 E 5,10,20 T322E566(1 )015AS 6.7 6 68.0 E 5,10,20 T322E686(1 )015AS 8.2 6 82.0 E 5,10,20 T322E826(1 )015AS 9.8 8 100.0 E 5,10,20 T322E107(1 )015AS 10.0 8 120.0 F 5,10,20 T322F127(1 )015AS 10.0 8 150.0 F 5,10,20 T322F157(1 )015AS 10.0 8

20 VOLT RATING AT 85°C — 13 VOLT RATING AT 125°C

1.0 A 5,10,20 T322A105(1 )020AS 0.5 4 1.2 A 5,10,20 T322A125(1 )020AS 0.5 4 1.5 A 5 T322A155J020AS 0.5 4 1.5 A 10 T322A155K020AS 0.5 4 CX05J155K T323A155K020AS 1.5 A 20 T322A155M020AS 0.5 4 CX05J155M T323A155M020AS

1.8 B 5,10,20 T322B185(1

)020AS 0.5 4 2.2 B 5,10,20 T322B225(1 )020AS 0.5 4 2.7 B 5,10,20 T322B275(1 )020AS 0.5 4 3.3 B 5,10,20 T322B335(1 )020AS 0.5 4 3.9 B 5,10,20 T322B395(1 )020AS 0.6 4 4.7 B 5 T322B475J020AS 0.8 4 4.7 B 10 T322B475K020AS 0.8 4 CX05J475K T323B475K020AS 4.7 B 20 T322B475M020AS 0.8 4 CX05J475M T323B475M020AS

5.6 C 5,10,20 T322C565(1

)020AS 0.9 4 6.8 C 5,10,20 T322C685(1 )020AS 1.1 6 8.2 C 5,10,20 T322C825(1 )020AS 1.3 6 10.0 C 5,10,20 T322C106(1 )020AS 1.6 6 12.0 D 5 T322D126J020AS 1.9 6 12.0 D 10 T322D126K020AS 1.9 6 CX05J126K T323D126K020AS 12.0 D 20 T322D126M020AS 1.9 6 CX05J126M T323D126M020AS 15.0 D 5 T322D156J020AS 2.4 6 15.0 D 10 T322D156K020AS 2.4 6 CX05J156K T323D156K020AS 15.0 D 20 T322D156M020AS 2.4 6 CX05J156M T323D156M020AS

18.0 D 5,10,20 T322D186(1

)020AS 2.9 6 22.0 D 5,10,20 T322D226(1 )020AS 3.5 6 27.0 E 5,10,20 T322E276(1 )020AS 4.3 6 33.0 E 5,10,20 T322E336(1 )020AS 5.0 6 39.0 E 5,10,20 T322E396(1 )020AS 6.2 6 47.0 E 5,10,20 T322E476(1 )020AS 7.5 6 56.0 E 5,10,20 T322E566(1 )020AS 8.9 6 68.0 E 5,10,20 T322E686(1 )020AS 10.0 6 82.0 F 5,10,20 T322F826(1 )020AS 10.0 8 100.0 F 5,10,20 T322F107(1 )020AS 10.0 8

25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C

0.47 A 5,10,20 T322A474(1 )025AS 0.5 3 0.56 A 5,10,20 T322A564(1 )025AS 0.5 3 0.68 A 5,10,20 T322A684(1 )025AS 0.5 3 0.82 A 5,10,20 T322A824(1 )025AS 0.5 3 1.0 A 5 T322A105J025AS 0.5 3 1.0 A 10 T322A105K025AS 0.5 3 CX05K105K T323A105K025AS 1.0 A 20 T322A105M025AS 0.5 3 CX05K105M T323A105M025AS

1.2 B 5,10,20 T322B125(1

)025AS 0.5 3 1.5 B 5 T322B155J025AS 0.5 3 1.5 B 10 T322B155K025AS 0.5 3 CX01K155K T323B155K025AS 1.5 B 20 T322B155M025AS 0.5 3 CX01K155M T323B155M020AS 1.8 B 5 T322B185J025AS 0.5 3 1.8 B 10 T322B185K025AS 0.5 3 CX01K185K T323B185K025AS 1.8 B 20 T322B185M025AS 0.5 3 CX01K185M T323B185M025AS 2.2 B 5 T322B225J025AS 0.5 3 2.2 B 10 T322B225K025AS 0.5 3 CX05K225K T323B225K025AS TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES 46 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Facelines indicate preferred part types and values. CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5

MAX. DISSIPATION CAPACITANCE D.C. FACTOR CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER

25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C (Cont’d)

2.2 B 20 T322B225M025AS 0.5 3 CX01/5K225M T323B225M025AS 2.7 B 5,10,20 T322B275(1 )025AS 0.5 3 3.3 B 5 T322B335J025AS 0.7 3 3.3 B 10 T322B335K025AS 0.7 3 CX05K335K T323B335K025AS 3.3 B 20 T322B335M025AS 0.7 3 CX05K335M T323B335M025AS

3.9 C 5,10,20 T322C395(1

)025AS 0.8 3 4.7 C 5,10,20 T322C475(1 )025AS 0.9 4 5.6 C 5,10,20 T322C565(1 )025AS 1.1 4 6.8 C 5 T322C685J025AS 1.4 4 6.8 C 10 T322C685K025AS 1.4 4 CX05K685K T323C685K025AS 6.8 C 20 T322C685M025AS 1.4 4 CX05K685M T323C685M025AS )025AS 1.5 4 10.0 C 5 T322C106J025AS 1.5 4 10.0 C 10 T322C106K025AS 1.5 4 CX05K106K T323C106K025AS 10.0 C 20 T322C106M025AS 1.5 4 CX05K106M T323C106M025AS

12.0 D 5,10,20 T322D126(1

)025AS 2.4 4 15.0 D 5,10,20 T322D156(1 )025AS 3.0 4 18.0 E 5,10,20 T322E186(1 )025AS 3.6 6 22.0 E 5,10,20 T322E226(1 )025AS 4.4 6 27.0 E 5,10,20 T322E276(1 )025AS 5.4 6 33.0 E 5,10,20 T322E336(1 )025AS 6.6 6 39.0 E 5,10,20 T322E396(1 )025AS 7.8 6 47.0 E 5,10,20 T322E476(1 )025AS 9.4 6 56.0 F 5,10,20 T322F566(1 )025AS 10.0 6 68.0 F 5,10,20 T322F686(1 )025AS 10.0 6

35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C

0.1 A 5,10,20 T322A104(1 )035AS 0.5 3 0.12 A 5,10,20 T322A124(1 )035AS 0.5 3 0.15 A 5,10,20 T322A154(1 )035AS 0.5 3 0.18 A 5,10,20 T322A184(1 )035AS 0.5 3 0.22 A 5,10,20 T322A224(1 )035AS 0.5 3 0.27 A 5,10,20 T322A274(1 )035AS 0.5 3 0.33 A 5 T322A334J035AS 0.5 3 0.33 A 10 T322A334K035AS 0.5 3 CX05M334K T323A334K035AS 0.33 A 20 T322A334M035AS 0.5 3 CX05M334M T323A334M035AS

0.39 A 5,10,20 T322A394(1

)035AS 0.5 3 0.47 A 5 T322A474J035AS 0.5 3 0.47 A 10 T322A474K035AS 0.5 3 CX05M474K T323A474K035AS 0.47 A 20 T322A474M035AS 0.5 3 CX05M474M T323A474M035AS 0.56 B 5 T322B564J035AS 0.5 3 0.56 B 10 T322B564K035AS 0.5 3 CX01M564K T323B564K035AS 0.56 B 20 T322B564M035AS 0.5 3 CX01M564M T323B564M035AS 0.68 B 5 T322B684J035AS 0.5 3 0.68 B 10 T322B684K035AS 0.5 3 CX01M684K T323B684K035AS 0.68 B 20 T322B684M035AS 0.5 3 CX01M684M T323B684M035AS 0.82 B 5 T322B824J035AS 0.5 3 0.82 B 10 T322B824K035AS 0.5 3 CX01M824K T323B824K035AS 0.82 B 20 T322B824M035AS 0.5 3 CX01M824M T323B824M035AS 1.0 B 5 T322B105J035AS 0.5 3 1.0 B 10 T322B105K035AS 0.5 3 CX01M105K T323B105K035AS 1.0 B 20 T322B105M035AS 0.5 3 CX01M105M T323B105M035AS 1.2 B 5 T322B125J035AS 0.5 3 1.2 B 10 T322B125K035AS 0.5 3 CX01M125K T323B125K035AS 1.2 B 20 T322B125M035AS 0.5 3 CX01M125M T323B125M035AS 1.5 B 5 T322B155J035AS 0.5 3 1.5 B 10 T322B155K035AS 0.5 3 CX05M155K T323B155K035AS 1.5 B 20 T322B155M035AS 0.5 3 CX05M155M T323B155M035AS

1.8 C 5,10,20 T322C185(1

)035AS 0.5 3 2.2 C 5,10,20 T322C225(1 )035AS 0.6 3 2.7 C 5,10,20 T322C275(1 )035AS 0.8 3 3.3 C 5 T322C335J035AS 0.9 4 3.3 C 10 T322C335K035AS 0.9 4 CX05M335K T323C335K035AS 3.3 C 20 T322C335M035AS 0.9 4 CX05M335M T323C335M035AS 3.9 C 5 T322C395J035AS 1.1 4 3.9 C 10 T322C395K035AS 1.1 4 CX05M395K T323C395K035AS 3.9 C 20 T322C395M035AS 1.1 4 CX05M395M T323C395M035AS 4.7 C 5 T322C475J035AS 1.3 4 4.7 C 10 T322C475K035AS 1.3 4 CX05M475K T323C475K035AS 4.7 C 20 T322C475M035AS 1.3 4 CX05M475M T323C475M035AS TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES T322/T323 Series Tantalum Molded / Axial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 47 CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Facelines indicate preferred part types and values.

MAX. DISSIPATION CAPACITANCE D.C. FACTOR CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER 5.6 D 5,10,20 T322D565(1 )035AS 1.6 4 6.8 D 5 T322D685J035AS 1.9 4 6.8 D 10 T322D685K035AS 1.9 4 CX05M685K T323D685K035AS 6.8 D 20 T322D685M035AS 1.9 4 CX05M685M T323D685M035AS

8.2 D 5,10,20 T322D825(1

)035AS 2.3 4 10.0 D 5 T322D106J035AS 2.8 4 10.0 D 10 T322D106K035AS 2.8 4 CX05M106K T323D106K035AS 10.0 D 20 T322D106M035AS 2.8 4 CX05M106M T323D106M035AS

12.0 E 5,10,20 T322E126(1

)035AS 3.3 4 15.0 E 5,10,20 T322E156(1 )035AS 4.2 6 18.0 E 5,10,20 T322E186(1 )035AS 5.0 6 22.0 E 5,10,20 T322E226(1 )035AS 6.2 6 27.0 E 5,10,20 T322E276(1 )035AS 7.5 6 33.0 E 5,10,20 T322E336(1 )035AS 9.2 6 39.0 F 5,10,20 T322F396(1 )035AS 10.0 6 47.0 F 5,10,20 T322F476(1 )035AS 10.0 6

50 VOLT RATING AT 85°C — 33 VOLT RATING AT 125°C

0.1 A 5 T322A104J050AS 0.5 3 0.1 A 10 T322A104K050AS 0.5 3 CX05N104K T323A104K050AS 0.1 A 20 T322A104M050AS 0.5 3 CX05N104M T323A104M050AS

0.12 A 5,10,20 T322A124(1

)050AS 0.5 3 0.15 A 5 T322A154J050AS 0.5 3 0.15 A 10 T322A154K050AS 0.5 3 CX05N154K T323A154K050AS 0.15 A 20 T322A154M050AS 0.5 3 CX05N154M T323A154M050AS

0.18 A 5,10,20 T322A184(1

)050AS 0.5 3 0.22 A 5 T322A224J050AS 0.5 3 0.22 A 10 T322A224K050AS 0.5 3 CX05N224K T323A224K050AS 0.22 A 20 T322A224M050AS 0.5 3 CX05N224M T323A224M050AS

0.27 A 5,10,20 T322A274(1

)050AS 0.5 3 0.33 B 5 T322B334J050AS 0.5 3 0.33 B 10 T322B334K050AS 0.5 3 CX05N334K T323B334K050AS 0.33 B 20 T322B334M050AS 0.5 3 CX05N334M T323B334M050AS 0.39 B 5 T322B394J050AS 0.5 3 0.39 B 10 T322B394K050AS 0.5 3 CX05N394K T323B394K050AS 0.39 B 20 T322B394M050AS 0.5 3 CX05N394M T323B394M050AS 0.47 B 5 T322B474J050AS 0.5 3 0.47 B 10 T322B474K050AS 0.5 3 CX05N474K T323B474K050AS 0.47 B 20 T322B474M050AS 0.5 3 CX05N474M T323B474M050AS

0.56 B 5,10,20 T322B564(1

)050AS 0.5 3 0.68 B 5 T322B684J050AS 0.5 3 0.68 B 10 T322B684K050AS 0.5 3 CX05N684K T323B684K050AS 0.68 B 20 T322B684M050AS 0.5 3 CX05N684M T323B684M050AS

0.82 B 5,10,20 T322B824(1

)050AS 0.5 3 1.0 B 5 T322B105J050AS 0.5 3 1.0 B 10 T322B105K050AS 0.5 3 CX05N105K T323B105K050AS 1.0 B 20 T322B105M050AS 0.5 3 CX05N105M T323B105M050AS

1.2 C 5,10,20 T322C125(1

)050AS 0.5 3 1.5 C 5 T322C155J050AS 0.6 4 1.5 C 10 T322C155K050AS 0.6 4 CX05N155K T323C155K050AS 1.5 C 20 T322C155M050AS 0.6 4 CX05N155M T323C155M050AS )050AS 0.7 4 2.2 C 5 T322C225J050AS 0.9 4 2.2 C 10 T322C225K050AS 0.9 4 CX05N225K T323C225K050AS 2.2 C 20 T322C225M050AS 0.9 4 CX05N225M T323C225M050AS

2.7 D 5,10,20 T322D275(1

)050AS 1.1 4 3.3 D 5 T322D335J050AS 1.3 4 3.3 D 10 T322D335K050AS 1.3 4 CX05N335K T323D335K050AS 3.3 D 20 T322D335M050AS 1.3 4 CX05N335M T323D335M050AS

3.9 D 5,10,20 T322D395(1

)050AS 1.6 4 4.7 D 5 T322D475J050AS 1.9 4 4.7 D 10 T322D475K050AS 1.9 4 CX05N475K T323D475K050AS 4.7 D 20 T322D475M050AS 1.9 4 CX05N475M T323D475M050AS

5.6 E 5,10,20 T322E565(1

)050AS 2.2 4 6.8 E 5,10,20 T322E685(1 )050AS 2.7 4 8.2 E 5,10,20 T322E825(1 )050AS 3.2 4 10.0 E 5,10,20 T322E106(1 )050AS 4.0 6 12.0 F 5,10,20 T322F126(1 )050AS 4.8 6 15.0 F 5,10,20 T322F156(1 )050AS 6.0 6 18.0 F 5,10,20 T322F186(1 )050AS 7.2 6 22.0 F 5,10,20 T322F226(1 )050AS 8.8 6 TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5 T322 & T323 (CX01 & CX05) SERIES 48 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 CX01 & CXO5 CAPACITORS PER MIL-PRF-49137/1 & 5 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5% Bold Facelines indicate preferred part types and values.

T330/T340 SERIES - PRECISION MOLDED — RADIAL LEAD — POLAR TYPE T330/T340 Series Tantalum Molded / Radial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 49 T330 Series KEMET T330 Series, polar-type, radial lead rectangular Precision Molded Tantalum (PMT) capacitors are primarily designed for appli- cations that demand full use of the premium space available in print- ed circuitry and high density packaging. Compact, space saving T330 Series capacitors provide superior packing factor and space utilization compared with tubular units of the same microcoulomb (CV) rating. T330 Series capacitors employ a rectangular sintered, dry tantalum anode, transfer molded in precision dies with a high impact resistant plastic having excellent electrical, physical, and moisture resistant properties. All cases utilize gold color plastic which permits laser marking with outstanding permanency and legibility. The polarity is indicated by a + sign permanently marked on the case. The radius on the two vertical edges at the positive end of B, C, and D Cases can be used as a sensing dimension for automatic insertion processes. The location of the standoffs may serve a similar sensing function for the A Case. These standoffs, located in the base of all case sizes, provide vents for air circulation and also allow easy removal of flux residues from leadwire and circuit board solder joints. T330 Series capacitors are highly reliable and exhibit performance characteristics typical of military test standards. They are available in capacitance values ranging from 0.1 to 220 microfarads in ±20, ±10, ±5% tolerance levels, and in working voltages from 6 to 50 volts. At 85°C the capacitors will operate continuously at full rated voltage. They are rated to 125°C when operated at 2/3 of nameplate voltage. In addition, they feature exceptionally low DC leakage and Dissipation Factor characteristics. They are ideal for bypass, coupling, and timing applications in com- puters, military ordinance, industrial, entertainment, and consumer electronic equipment.

• CAPACITANCE/VOLTAGE RANGE: T330: 0.1-220µF, 6-50 Volts. T340: 0.1-330µF, 6-50 Volts.
• CAPACITANCE TOLERANCE: Available in standard EIA nominal values with ±20% tolerance standard, ±10% and ±5% available on special order.
• DISSIPATION FACTOR: Maximum DF limits are shown in corre- sponding series part number listing. See Application Notes Section, page 78.
• DC LEAKAGE CURRENT: Maximum leakage values at 25°C are shown in part number listings, pages 51, 52, 55, 56 and 57. See Application Notes Section, page 76.
• RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, pages 76 & 77 for description.
• IMPEDANCE and ESR: See Application Notes Section, page 77 & 78 for additional information. Reference ESR values are shown in table below.
• AC RIPPLE VOLTAGE: Permissible AC ripple voltage is related to ESR of the capacitor and the power dissipation capabilities of a par- ticular case size.Thermal capacities for the various case sizes have been determined and are listed in Table below. For addi- tional description see page 78.
• ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 80, 81 and 82.
• LEAD MATERIAL: Solder coated steel core with copper ply per MIL-STD-1276.
• LEAD TAPE and REEL: Reeling per specification RS-468. See pages 71 and 73 for additional information. PERFORMANCE CHARACTERISTICS T340 Series The compact space saving T340 Series is transfer molded in preci- sion dies with a high impact resistant plastic having excellent elec- trical, physical, and moisture resistant properties. The gold color plastic case utilized permits laser marking with outstanding perma- nency and legibility. Marking is provided on the top of the case to allow visual inspection for proper polarity and placement after insertion. In addition, positive polarity identification is achieved by an easily recognized molded radius on the positive end of the case. This physical polarity identifi- cation is readily observed after capacitor placement as a further aid to the top marking in prevention of possible reverse insertion. Standoffs, located in the base of all case sizes, provide vents for air circulation and also allow easy removal of flux residues from lead- wire and circuit board solder joints. With very low impedance and ESR values, the T340 Series features exceptionally low DC leakage and DF characteristics. The T340 Series is available in standard ±20%; ±10%; ±5% (special order) capacitance tolerance. T340 Series capacitors are highly reliable and exhibit performance characteristics typical of military test standards. Series Case Size Watts T330/T340 A .09 B .09 C. 1 0 0 T330 D .125 T340 only D/F .125 E. 1 8 0 Maximum Power Dissipation: 25°C Ambient T330/T340 ESR (OHMS) at 100 kHz @ +25°C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here,is made as to the accuracy of these values for any particular T330/T340 Series product.) 0.10 0.15 0.22 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 8.0 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 0.9 0.7 8.0 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 0.8 0.6 6.0 5.0 4.0 3.2 2.5 2.0 1.6 1.3 1.0 0.8 0.6 7.0 5.5 4.5 3.6 2.9 2.3 1.8 1.4 1.2 0.9 0.6 8.0 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 1.0 0.8 26.0 21.0 17.0 15.0 13.0 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 1.0 0.8 26.0 21.0 17.0 15.0 13.0 10.0 8.0 5.0 3.5 3.0 2.5 2.0 1.6 1.2 1.0 Cap. µF Volt Volt Volt Volt Volt Volt Volt

T330 SERIES - PRECISION MOLDED - RADIAL LEAD 50 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 CAPACITOR OUTLINE DRAWINGS A CASE E W H T .500±.125 (12.7±.3.18) .025±.001 (.64±.03) W H B, C, & D CASES S T .050R±.005 (1.27R±.13) E Note: On the "B" case size the stand off appears only between the two leadss .500±.125 (12.7±.3.18) S .020±.001 (.51±.03) .015±.005 (.38±.13) (Stand Off) .150±.005 (.38±.13) (Stand Off) DIMENSIONS — INCHES & (MILLIMETERS) CASE H W T E S SIZE CASE HEIGHT CASE WIDTH CASE THICKNESS CASE TO WIRE LEAD SPACING

ORDERING INFORMATION

T 330 B 104 M 035 A S* TANTALUM SERIES Radial Lead Precision Molded Polar Solid Tantalum CASE SIZE A / B / C / D PICOFARAD CODE First two digits are significant figures. Third digit is the number of zeros following. LEAD MATERIAL S — Standard (Solder-Coated Nickel) FAILURE RATE LEVEL A — Not Applicable VOLTAGE RATING CAP. TOLERANCE M — ±20% — Std. K — ±10% — Std. J — ±5% — Available on request MARKING INFORMATION 4.7K 25K Capacitance Tolerance: 5% - J 10% - K 20% - Standard (no mark) Polarity KEMET Trademark Voltage Rating *Part Number Example: T330B104M035AS (14 digits – no spaces)

MAX. DISSIPATION CAPAC- D.C. FACTOR ITANCE CASE LEAKAGE %@25°C, µF SIZE KEMET PART NUMBER µA@25°C 120Hz

33.0 C T330C336(1 )010AS 2 6

39.0 C T330C396(1 )010AS 5 6

47.0 D T330D476(1 )010AS 5 6

56.0 D T330D566(1 )010AS 5 6

68.0 D T330D686(1 )010AS 5 6

82.0 D T330D826(1 )010AS 5 6

100.0 D T330D107(1 )010AS 10 6

120.0 D T330D127(1 )010AS 10 6

150.0 D T330D157(1 )010AS 10 6

3.9 B T330B395(1 )015AS 1 6

4.7 B T330B475(1 )015AS 1 6

5.6 B T330B565(1 )015AS 1 6

6.8 B T330B685(1 )015AS 1 6

8.2 B T330B825(1 )015AS 1 6

10.0 C T330C106(1 )015AS 1 6

12.0 C T330C126(1 )015AS 1 6

15.0 C T330C156(1 )015AS 2 6

18.0 C T330C186(1 )015AS 5 6

22.0 C T330C226(1 )015AS 5 6

27.0 C T330C276(1 )015AS 5 6

33.0 C T330C336(1 )015AS 5 6

39.0 D T330D396(1 )015AS 10 6

47.0 D T330D476(1 )015AS 10 6

56.0 D T330D566(1 )015AS 10 6

68.0 D T330D686(1 )015AS 10 6

82.0 D T330D826(1 )015AS 10 6

MAX. DISSIPATION CAPAC- D.C. FACTOR ITANCE CASE LEAKAGE %@25°C, µF SIZE KEMET PART NUMBER µA@25°C 120Hz

10.0 B T330B106(1 )006AS 1 6

12.0 B T330B126(1 )006AS 1 6

15.0 B T330B156(1 )006AS 1 6

18.0 B T330B186(1 )006AS 1 6

22.0 B T330B226(1 )006AS 1 6

27.0 C T330C276(1 )006AS 1 6

33.0 C T330C336(1 )006AS 1 6

39.0 C T330C396(1 )006AS 1 6

47.0 C T330C476(1 )006AS 2 6

56.0 C T330C566(1 )006AS 5 6

68.0 C T330C686(1 )006AS 5 6

82.0 D T330D826(1 )006AS 5 6

100.0 D T330D107(1 )006AS 5 6

120.0 D T330D127(1 )006AS 5 6

150.0 D T330D157(1 )006AS 5 6

180.0 D T330D187(1 )006AS 10 6

220.0 D T330D227(1 )006AS 10 8

5.6 B T330B565(1 )010AS 1 6

6.8 B T330B685(1 )010AS 1 6

8.2 B T330B825(1 )010AS 1 6

10.0 B T330B106(1 )010AS 1 6

12.0 B T330B126(1 )010AS 1 6

15.0 B T330B156(1 )010AS 1 6

18.0 C T330C186(1 )010AS 1 6

22.0 C T330C226(1 )010AS 2 6

27.0 C T330C276(1 )010AS 2 6

MAX. DISSIPATION CAPAC- D.C. FACTOR ITANCE CASE LEAKAGE %@25°C, µF SIZE KEMET PART NUMBER µA@25°C 120Hz

0.39 A T330A394(1 )035AS 1 3

0.47 A T330A474(1 )035AS 1 3

0.56 A T330A564(1 )035AS 1 3

0.68 A T330A684(1 )035AS 1 3

0.82 A T330A824(1 )035AS 1 3

1.0 A T330A105(1 )035AS 1 3

1.2 A T330A125(1 )035AS 1 4

1.5 A T330A155(1 )035AS 1 4

1.8 A T330A185(1 )035AS 1 4

2.2 A T330A225(1 )035AS 1 4

2.7 A T330A275(1 )035AS 1 4

0.10 A T330A104(1 )050AS 1 3

0.12 A T330A124(1 )050AS 1 3

0.15 A T330A154(1 )050AS 1 3

0.18 A T330A184(1 )050AS 1 3

0.22 A T330A224(1 )050AS 1 3

0.27 A T330A274(1 )050AS 1 3

0.33 A T330A334(1 )050AS 1 3

0.39 A T330A394(1 )050AS 1 3

0.47 A T330A474(1 )050AS 1 3

0.56 A T330A564(1 )050AS 1 3

0.68 A T330A684(1 )050AS 1 3

0.82 A T330A824(1 )050AS 1 4

1.0 A T330A105(1 )050AS 1 4

1.2 A T330A125(1 )050AS 1 4

1.5 A T330A155(1 )050AS 1 4

MAX. DISSIPATION CAPAC- D.C. FACTOR ITANCE CASE LEAKAGE %@25°C, µF SIZE KEMET PART NUMBER µA@25°C 120Hz

18.0 A T330A186(1 )006AS 1 6

22.0 A T330A226(1 )006AS 1 6

10.0 A T330A106(1 )010AS 1 6

12.0 A T330A126(1 )010AS 1 6

15.0 A T330A156(1 )010AS 1 6

8.2 A T330A825(1 )015AS 1 6

5.6 A T330A565(1 )020AS 1 6

6.8 A T330A685(1 )020AS 1 6

3.3 A T330A335(1 )025AS 1 4

3.9 A T330A395(1 )025AS 1 4

4.7 A T330A475(1 )025AS 1

0.10 A T330A104(1 )035AS 1 3

0.12 A T330A124(1 )035AS 1 3

0.15 A T330A154(1 )035AS 1 3

0.18 A T330A184(1 )035AS 1 3

0.22 A T330A224(1 )035AS 1 3

0.27 A T330A274(1 )035AS 1 3

0.33 A T330A334(1 )035AS 1 3

T330 SERIES - PRECISION MOLDED - RADIAL LEAD T330 Series Tantalum Molded / Radial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 51 RATINGS & PART NUMBER REFERENCE A CASE B, C & D CASES (1) To complete Part Number insert Capacitance Tolerance Symbol in the 9th character, M — ±20%, K — ±10%, J — ±5%. Bold facelines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.

MAX. DISSIPATION CAPAC- D.C. FACTOR ITANCE CASE LEAKAGE %@25°C, µF SIZE KEMET PART NUMBER µA@25°C 120Hz

6.8 C T330C685(1 )035AS 2 6

8.2 C T330C825(1 )035AS 5 6

10.0 C T330C106(1 )035AS 5 6

12.0 D T330D126(1 )035AS 5 6

15.0 D T330D156(1 )035AS 5 6

18.0 D T330D186(1 )035AS 10 6

22.0 D T330D226(1 )035AS 10 6

27.0 D T330D276(1 )035AS 10 6

33.0 D T330D336(1 )035AS 10 6

50 VOLT RATING AT 85°C—33 VOLT RATING AT 125°C

0.10 B T330B104(1 )050AS 1 6

0.12 B T330B124(1 )050AS 1 6

0.15 B T330B154(1 )050AS 1 6

0.18 B T330B184(1 )050AS 1 6

0.22 B T330B224(1 )050AS 1 6

0.27 B T330B274(1 )050AS 1 6

0.33 B T330B334(1 )050AS 1 6

0.39 B T330B394(1 )050AS 1 6

0.47 B T330B474(1 )050AS 1 6

0.56 B T330B564(1 )050AS 1 6

0.68 B T330B684(1 )050AS 1 6

0.82 B T330B824(1 )050AS 1 6

1.0 B T330B105(1 )050AS 1 6

1.2 B T330B125(1 )050AS 1 6

1.5 B T330B155(1 )050AS 1 6

1.8 B T330B185(1 )050AS 1 6

2.2 B T330B225(1 )050AS 1 6

2.7 C T330C275(1 )050AS 1 6

3.3 C T330C335(1 )050AS 2 6

3.9 C T330C395(1 )050AS 5 6

4.7 C T330C475(1 )050AS 5 6

5.6 C T330C565(1 )050AS 5 6

6.8 D T330D685(1 )050AS 5 6

8.2 D T330D825(1 )050AS 5 6

10.0 D T330D106(1 )050AS 5 6

12.0 D T330D126(1 )050AS 5 6

15.0 D T330D156(1 )050AS 10 6

18.0 D T330D186(1 )050AS 10 6

MAX. DISSIPATION CAPAC- D.C. FACTOR ITANCE CASE LEAKAGE %@25°C, µF SIZE KEMET PART NUMBER µA@25°C 120Hz

2.7 B T330B275(1 )025AS 1 6

3.3 B T330B335(1 )025AS 1 6

3.9 B T330B395(1 )025AS 1 6

4.7 B T330B475(1 )025AS 1 6

5.6 C T330C565(1 )025AS 1 6

6.8 C T330C685(1 )025AS 1 6

8.2 C T330C825(1 )025AS 1 6

10.0 C T330C106(1 )025AS 1 6

12.0 C T330C126(1 )025AS 1 6

15.0 C T330C156(1 )025AS 2 6

18.0 D T330D186(1 )025AS 5 6

22.0 D T330D226(1 )025AS 5 6

27.0 D T330D276(1 )025AS 5 6

33.0 D T330D336(1 )025AS 5 6

39.0 D T330D396(1 )025AS 10 6

47.0 D T330D476(1 )025AS 10 6

35 VOLT RATING AT 85°C—23 VOLT RATING AT 125°C

0.10 B T330B104(1 )035AS 1 6

0.12 B T330B124(1 )035AS 1 6

0.15 B T330B154(1 )035AS 1 6

0.18 B T330B184(1 )035AS 1 6

0.22 B T330B224(1 )035AS 1 6

0.27 B T330B274(1 )035AS 1 6

0.33 B T330B334(1 )035AS 1 6

0.39 B T330B394(1 )035AS 1 6

0.47 B T330B474(1 )035AS 1 6

0.56 B T330B564(1 )035AS 1 6

0.68 B T330B684(1 )035AS 1 6

0.82 B T330B824(1 )035AS 1 6

1.0 B T330B105(1 )035AS 1 6

1.2 B T330B125(1 )035AS 1 6

1.5 B T330B155(1 )035AS 1 6

1.8 B T330B185(1 )035AS 1 6

2.2 B T330B225(1 )035AS 1 6

2.7 B T330B275(1 )035AS 1 6

3.3 B T330B335(1 )035AS 1 6

3.9 C T330C395(1 )035AS 1 6

4.7 C T330C475(1 )035AS 1 6

5.6 C T330C565(1 )035AS 1 6

T330 SERIES - PRECISION MOLDED - RADIAL LEADS 52 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 B, C & D CASES (Cont’d) (1) To complete Part Number insert Capacitance Tolerance Symbol in the 9th character, M — ±20%, K — ±10%, J — ±5%. Bold facelines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.

T340 SERIES - PRECISION MOLDED - RADIAL LEADS T340 Series Tantalum Molded / Radial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 53 H** W T LEAD SPACING LEAD LENGTH LEAD DIAMETER CASE (MAX) (MAX) (MAX) S L D SIZE H W T Inches mm Inches mm Inches mm CAPACITOR OUTLINE DRAWINGS DIMENSIONS — INCHES & MILLIMETERS T3 4 0A1 0 5M0 3 5AS * TANTALUM SERIES Radial Lead Precision Molded Polar Solid Tantalum CASE SIZE A / B / C / D / E / F PICOFARAD CODE First two digits are significant figures. Third digit is the number of zeros following. LEAD MATERIAL S — Standard (solder-coated copperweld) FAILURE RATE LEVEL A — Not Applicable VOLTAGE RATING CAPACITANCE TOLERANCE M — ±20% — Std. K — ±10% J— ± 5 % Available on request *Part Number Example: T340A105M035AS (14 digits – no spaces) F case size is the same as D, but with .200" (5.0 mm) lead spacing. Specify T340F when ordering this spacing. TOP A Case T T TTT B Case C Case D or F Case E CaseA Case S SIDE SSS S DDD L H L H L H WW L H L H L H WWW D D Effective September 30, 2005, the KEMET T340 Series is RoHS compliant. T – 100% tin

54 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 MARKING INFORMATION Insert Date Code as follows: = DIN. Specification Date Code 1st digit - represents year Q - 2005 R - 2006 S - 2007 T - 2008 U - 2009 L - 2000 M - 2001 N - 2002 O - 2003 P - 2004 2nd digit - represents month 1 - 9 for January - September O for October N for November D for December 220J + 10 K Polarity Voltage KEMET Trademark Capacitance (in Microfarads) 10K + 16 K 4.7J + 10 K 33K + 10 K A Case B Case C Case D & F Case E Case 47J + 16 K Capacitance Tolerance ±5% - J ±10% - K ±20% - Standard, (no marking) European American 220J + 10 K Polarity Voltage KEMET Trademark Capacitance (in Microfarads) 10K + 16 K 4.7J + 10 K 33K + 10 K A Case B Case C Case D & F Case E Case 47J + 16 K Capacitance Tolerance ±5% - J ±10% - K ±20% - Standard, (no marking)

MAX. MAX. DISSIPATION MAX. CAPACI- DC FACTOR IMPEDANCE ITANCE CASE KEMET LEAKAGE %@25°C, Ω @ µF SIZE PART NUMBER µA@25°C 120 HZ 10 kHz

3 VOLT RATING AT 85°C — 2 VOLT AT 125°C

10.0 A T340A106(1)003AS 1.0 6 6.0 15.0 A T340A156(1)003AS 1.0 6 3.2 33.0 B T340B336(1)003AS 1.5 6 2.1 47.0 B T340B476(1)003AS 3.0 6 1.8 68.0 C T340C686(1)003AS 4.0 6 1.5 100.0 C T340C107(1)003AS 5.0 6 1.2 6/6.3 VOLT RATING AT 85°C — 4 VOLT AT 125°C 6.8 A T340A685(1 )006AS 1.0 6 6.0 10.0 B T340B106(1 )006AS 1.0 6 12.0 B T340B126(1 )006AS 1.0 6 15.0 B T340B156(1 )006AS 1.0 6 18.0 B T340B186(1 )006AS 1.0 6 22.0 B T340B226(1 )006AS 2.5 6 2.1 27.0 C T340C276(1 )006AS 2.5 6 33.0 C T340C336(1 )006AS 2.5 6 39.0 C T340C396(1 )006AS 2.5 6 47.0 C T340C476(1 )006AS 3.0 6 1.5 56.0 C T340C566(1 )006AS 5.0 6 68.0 C T340C686(1 )006AS 5.0 6 82.0 D/F T340(2 )826(1)006AS 5.0 6 100.0 D/F T340(2 )107(1)006AS 5.0 6 120.0 D/F T340(2 )127(1)006AS 5.0 6 150.0 D/F T340(2 )157(1)006AS 8.0 6 0.8 180.0 D/F T340(2 )187(1)006AS 10.0 6 220.0 D/F T340(2 )227(1)006AS 10.0 6 330.0 E T340E337(1 )006AS 10.0 8 0.5

10 VOLT RATING AT 85°C — 6 VOLT AT 125°C

4.7 A T340A475(1 )010AS 1.0 6 7.5 5.6 B T340B565(1 )010AS 1.0 6 6.8 B T340B685(1 )010AS 1.0 6 8.2 B T340B825(1 )010AS 1.0 6 10.0 B T340B106(1 )010AS 1.0 6 12.0 B T340B126(1 )010AS 1.0 6 15.0 B T340B156(1 )010AS 3.0 6 2.5 18.0 C T340C186(1 )010AS 3.0 6 22.0 C T340C226(1 )010AS 3.0 6 27.0 C T340C276(1 )010AS 3.0 6 33.0 C T340C336(1 )010AS 5.0 6 1.7 39.0 C T340C396(1 )010AS 5.0 6 47.0 D/F T340(2 )476(1)010AS 5.0 6 56.0 D/F T340(2 )566(1)010AS 5.0 6 68.0 D/F T340(2 )686(1)010AS 5.0 6 82.0 D/F T340(2 )826(1)010AS 8.0 6 100.0 D/F T340(2 )107(1)010AS 10.0 6 1.0 120.0 D/F T340(2 )127(1)010AS 10.0 6 150.0 D/F T340(2 )157(1)010AS 10.0 6 220.0 E T340E227(1 )010AS 10.0 6 0.5 15/16 VOLT RATING AT 85°C — 10 VOLT AT 125°C 3.3 A T340A335(1 )015AS 1.0 6 9.0 3.9 B T340B395(1 )015AS 1.0 6 4.7 B T340B475(1 )015AS 1.0 6 5.6 B T340B565(1 )015AS 1.0 6 6.8 B T340B685(1 )015AS 1.0 6 8.2 B T340B825(1 )015AS 1.0 6 10.0 B T340B106(1 )015AS 3.0 6 3.2 TANTALUM MOLDED / RADIAL T340 SERIES T340 Series Tantalum Molded / Radial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 55 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information. Bold facelines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.

56 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information. (.197”) lead spacing. See page 53 for outline drawings. Bold facelines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. MAX. MAX. DISSIPATION MAX CAPAC- DC FACTOR IMPEDANCE ITANCE CASE KEMET LEAKAGE %@25°C, Ω @ µF SIZE PART NUMBER µA@25°C 120 HZ 10 kHz 15/16 VOLT RATING AT 85°C — 10 VOLT AT 125°C (Cont’d) 12.0 C T340C126(1 )015AS 3.0 6 15.0 C T340C156(1 )015AS 3.5 6 2.5 18.0 C T340C186(1 )015AS 4.0 6 22.0 C T340C226(1 )015AS 4.0 6 2.1 27.0 C T340C276(1 )015AS 5.0 6 33.0 C T340C336(1 )015AS 5.0 6 39.0 D/F T340(2 )396(1)015AS 7.0 6 47.0 D/F T340(2)476(1)015AS 7.0 6 1.3 56.0 D/F T340(2 )566(1)015AS 8.0 6 68.0 D/F T340(2 )686(1)015AS 9.0 6 1.1 82.0 D/F T340(2 )826(1)015AS 10.0 6 100.0 E T340E107(1 )015AS 10.0 6 0.8 150.0 E T340E157(1 )015AS 10.0 6 0.6

20 VOLT RATING AT 85°C — 13 VOLT AT 125°C

2.2 A T340A225(1 )020AS 1.0 6 12.0 3.3 B T340B335(1 )020AS 1.0 6 8.0 4.7 B T340B475(1 )020AS 1.5 6 5.5 6.8 B T340B685(1 )020AS 2.5 6 4.2 15.0 C T340C156(1 )020AS 5.0 6 2.5 47.0 D T340D476(1 )020AS 9.0 6 1.3 100.0 E T340E107(1 )020AS 10.0 6 0.8

25 VOLT RATING AT 85°C — 16 VOLT AT 125°C

1.5 A T340A155(1 )025AS 1.0 6 17.0 2.7 B T340B275(1 )025AS 1.0 6 3.3 B T340B335(1 )025AS 1.0 6 3.9 B T340B395(1 )025AS 1.0 6 4.7 B T340B475(1 )025AS 2.0 6 5.5 5.6 C T340C565(1 )025AS 2.0 6 6.8 C T340C685(1 )025AS 3.0 6 4.2 8.2 C T340C825(1 )025AS 3.0 6 10.0 C T340C106(1 )025AS 3.5 6 3.0 12.0 C T340C126(1 )025AS 3.5 6 15.0 C T340C156(1 )025AS 4.0 6 18.0 D/F T340(2 )186(1)025AS 5.0 6 22.0 D/F T340(2 )226(1)025AS 5.5 6 2.0 27.0 D/F T340(2 )276(1)025AS 7.0 6 33.0 D/F T340(2 )336(1)025AS 8.0 6 1.5 39.0 D/F T340(2 )396(1)025AS 10.0 6 47.0 D/E/F T340(2 )476(1)025AS 10.0 6 1.3 68.0 E T340E686(1 )025AS 10.0 6 0.9

35 VOLT RATING AT 85°C — 23 VOLT AT 125°C

0.1 A T340A104(1 )035AS 1.0 6 220.0 0.15 A T340A154(1 )035AS 1.0 6 150.0 0.22 A T340A224(1 )035AS 1.0 6 100.0 0.33 A T340A334(1 )035AS 1.0 6 75.0 0.47 A T340A474(1 )035AS 1.0 6 50.0 0.68 A T340A684(1 )035AS 1.0 6 36.0 1.0 A T340A105(1 )035AS 1.0 6 25.0 1.2 B T340B125(1 )035AS 1.0 6 15.0 1.5 B T340B155(1 )035AS 1.0 6 1.8 B T340B185(1 )035AS 1.0 6 2.2 B T340B225(1 )035AS 1.0 6 11.0 2.7 B T340B275(1 )035AS 1.0 6 3.3 B/C T340(2 )335(1)035AS 1.0 6 7.5

KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 57 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information. (.197”) lead spacing. See page 53 for outline drawings. Bold facelines indicate popular part types and values. Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option. MAX. MAX. DISSIPATION MAX CAPACI- DC FACTOR IMPEDANCE ITANCE CASE KEMET LEAKAGE %@25°C, Ω @ µF SIZE PART NUMBER µA@25°C 120 HZ 10 kHz

35 VOLT RATING AT 85°C — 23 VOLT AT 125°C (Cont’d)

3.9 C T340C395(1 )035AS 1.0 6 4.7 C T340C475(1 )035AS 2.5 6 5.5 5.6 C T340C565(1 )035AS 2.5 6 6.8 C T340C685(1 )035AS 3.0 6 4.2 8.2 C T340C825(1 )035AS 4.0 6 10.0CT340(2)106(1 )035AS 4.062.8 12.0 D/F T340(2)126(1)035AS 5.0 6 15.0 D/F T340(2 )156(1)035AS 5.0 6 2.2 18.0 D/F T340(2 )186(1)035AS 8.0 6 22.0 D/F T340(2 )226(1)035AS 8.0 6 1.9 27.0 D/F T340(2 )276(1)035AS 10.0 6 33.0 D/E/F T340(2 )336(1)035AS 10.0 6 1.4 47.0 E T340E476(1 )035AS 10.0 6 1.1

40 VOLT RATING AT 85°C — 32 VOLT AT 100°C

0.1 A T340A104(1 )040AS 1.0 6 200.0 0.15 A T340A154(1 )040AS 1.0 6 140.0 0.22 A T340A224(1 )040AS 1.0 6 95.0 0.33 A T340A334(1 )040AS 1.0 6 70.0 0.47 A T340A474(1 )040AS 1.0 6 46.0 0.68 A T340A684(1 )040AS 1.0 6 34.0 1.0 A T340A105(1 )040AS 1.0 6 23.0 1.5 B T340B155(1 )040AS 1.0 6 14.0 2.2 B T340B225(1 )040AS 1.7 6 10.0 3.3 C T340C335(1 )040AS 2.3 6 7.0 4.7 C T340C475(1 )040AS 3.0 6 5.0 6.8 C T340C685(1 )040AS 3.5 6 3.9 10.0 D T340D106(1 )040AS 4.5 6 2.6 15.0 D T340D156(1 )040AS 6.0 6 2.0 22.0 D T340D226(1 )040AS 9.0 6 1.7 33.0 E T340E336(1 )040AS 10.0 6 1.3 47.0 E T340E476(1 )040AS 10.0 6 1.0

50 VOLT RATING AT 85°C — 33 VOLT AT 125°C

0.1 A T340A104(1 )050AS 1.0 6 220.0 0.15 A T340A154(1 )050AS 1.0 6 150.0 0.22 A T340A224(1 )050AS 1.0 6 100.0 0.33 A T340A334(1 )050AS 1.0 6 75.0 0.39 B T340B394(1 )050AS 1.0 6 0.47 B T340B474(1 )050AS 1.0 6 50.0 0.56 B T340B564(1 )050AS 1.0 6 0.68 B T340B684(1 )050AS 1.0 6 36.0 0.82 B T340B824(1 )050AS 1.0 6 1.0 B T340B105(1 )050AS 1.0 6 25.0 1.2 B T340B125(1 )050AS 1.0 6 1.5 B/C T340(2 )155(1)050AS 1.1 6 15.0 1.8 B T340B185(1 )050AS 1.1 6 2.2 B/C T340(2 )225(1)050AS 1.5 6 11.0 2.7 C T340C275(1 )050AS 1.5 6 3.3 C/D T340(2 )335(1)050AS 2.5 6 7.5 3.9 C T340C395(1 )050AS 3.0 6 4.7 C/D T340(2 )475(1)050AS 3.5 6 5.5 5.6 C T340C565(1 )050AS 4.0 6 6.8 D/F T340(2 )685(1)050AS 5.0 6 4.0 8.2 D/F T340(2 )825(1)050AS 6.0 6 10.0 D/F T340(2 )106(1)050AS 7.0 6 2.8 12.0 D/F T340(2 )126(1)050AS 8.0 6 15.0 D/F T340(2 )156(1)050AS 9.0 6 2.2 18.0 D/F T340(2 )186(1)050AS 10.0 6 22.0 E T340E226(1 )050AS 10.0 6 1.7

TANTALUM MOLDED / RADIAL — MIL-C-49137/6 T370/T378 (CX06) MIL-PRF-49137/6 SERIES 58 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 The KEMET Micron Series is available in a variety of case styles and sizes. They are designed to operate from -55°C to +85°C at full volt- age and to +125°C with derating. Typical applications include use in bypass coupling, filtering, and timing circuits. The KEMET Micron Series is qualified under MIL-PRF-49137/6 as military styles CX06 (T378 Series). The KEMET T370 Series is encapsulated in a molded gold color epoxy. This encasement technique allows maximum utilization of cir- cuit board real estate with precisely centered leads in a microminia- ture case. These molded packages also provide significant improvements in overall dimensional consistency as well as lead wires precisely spaced to within .010 inches (.25mm). With our new molded packaging design, these capacitors can now be marked using our laser printing technique. The KEMET laser marking system ensures legibility and permanency while offering a complete alphanumeric print format. Laser print meets all require- ments of the Resistance to Solvents Test, method 215 of MIL-STD-202.

• CAPACITANCE/VOLTAGE RANGE: T370 Series: 0.68-220µF, 3-35 Volts. T378 Series: 2.2-220µF, 3-35 Volts.
• CAPACITANCE TOLERANCE: Available in stan- dard EIA nominal values with ±20% tolerance standard, +40% -20%, ±10% and ±5% are also available.
• DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number list- ings on page 60. See Application Notes Section, page 76 for additional information.
• DC LEAKAGE CURRENT: Maximum leakage val- ues at 25°are shown in part number listings, page 60. See Application Notes Section, page 76 for additional information. RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, pages 76 & 77 for description.
• IMPEDANCE and ESR: See Application Notes Section, pages 78 for description. Reference ESR values are listed in table below.
• AC RIPPLE VOLTAGE: Permissible AC ripple volt- age is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined and are listed in Table below. For additional description see page 78.
• ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213 Condition 1. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 80, 81 and 82.
• LEAD MATERIAL: Solder coated nickel per MIL-STD1266, type N32.
• LEAD TAPE and REEL: Reeling per specification RS-468. See pages 72 and 74 for additional infor- mation. PERFORMANCE CHARACTERISTICS Case Size Watts C. 0 7 0 D. 0 8 0 E. 0 9 0 F. 1 0 0 Maximum Power Dissipation Capability @ 25°C T370 ESR (OHMS) at 100 kHz @ +25 °C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of these values for any particular T370 Series product.) 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 2.5 2.0 1.6 1.3 1.0 5.5 4.5 3.6 2.9 2.3 1.8 1.4 1.2 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 Cap. µF Volt Volt Volt Volt Volt Volt

TANTALUM MOLDED / RADIAL MIL-PRF-49137/6 T370/T378 (CX06) SERIES T370/T378 Series Tantalum Molded / Radial KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 59 CASE H W T S LEAD DIAMETER CAPACITOR OUTLINE DRAWINGDIMENSIONS - INCHES (MILLIMETER) *C case size T370 style only. CAPACITOR MARKING INDUSTRIAL PRODUCT MILITARY PRODUCT T 37X D 475 M 035 A S* TANTALUM SERIES T370, T378 CASE SIZE CAPACITANCE IN PICOFARAD CODE First two digits are significant figures. Third figure is the number of zeros following. CAPACITANCE TOLERANCE L — +40%, -20% LEAD MATERIAL S — Standard (solder-coated nickel) FAILURE RATE LEVEL A — Not Applicable VOLTAGE RATING MIL-PRF-49137/6 PART NUMBER CX06(T378) STYLE CX 06 D 335 K TYPE Fixed, solid tantalum, polar, nonhermetically sealed capacitors. STYLE 06-T378 (radial leads) VOLTAGE CAPACITANCE TOLERANCE Symbol Capacitance Tolerance Percent ± K1 0 M2 0 CAPACITANCE The nominal capacitance value, expressed in picofarads (pF), is identified by a three digit number. The first two digits represent signifi- cant figures and the last digit speci- fies the number of zeros to follow. Symbol Rated (85°C) Surge (85°C) Volts, dc Volts, dc A 2 2.6 B3 4 C4 5 D6 8 F1 0 1 3 H1 5 2 0 J2 0 2 6 K2 5 3 2 M3 5 4 6 H Leads Lengths Both .350±.050 (8.89±1.27) W T378 1.625±.125 (41.28±3.18) 1.375± .125 (34.93±3.18) (-) S (+) T T370 Military Part Number Polarity Indicator (+) KEMET Trademark Date Code (Year/Week) CX06M226M 0126VDK T378 Lot Code Capacitance Tolerance Polarity Indicator (+) KEMET Trademark Voltage Rating106M020K Capacitance Value (pf code) T370 *Part Number Example: T370D475M035AS (14 digits – no spaces)

CAPACITANCE CASE INDUSTRIAL PRODUCT MILITARY PRODUCT DC LEAKAGE DISSIPATION FACTOR µF SIZE T370 CXO6 T378 µA@25°C %@25°C 120HZ PART NO. PART NO. PART NO. MAXIMUM MAXIMUM 3 VOLT RATING AT 85°C—2.0 VOLT RATING AT 125°C 220.0 F T370F227(1 )003AS CX06B227(2 ) T378F227(3 )003AS 9.0 15 4 VOLT RATING AT 85°C—2.7 VOLT RATING AT 125°C 15.0 C T370C156(1 )004AS 1.0 8 47.0 D T370D476(1 )004AS CX06C476(2 ) T378D476(3 )004AS 2.0 8 68.0 E T370E686(1 )004AS CX06C686(2 ) T378E686(3 )004AS 3.0 8 6 VOLT RATING AT 85°C—4.0 VOLT RATING AT 125°C 10.0 C T370C106(1 )006AS 1.0 6 33.0 D T370D336(1 )006AS CX06D336(2 ) T378D336(3 )006AS 2.0 6 47.0 E T370E476(1 )006AS CX06D476(2 ) T378E476(3 )006AS 3.0 6 150.0 F T370F157(1 )006AS CX06D157(2 ) T378F157(3 )006AS 9.0 10 10 VOLT RATING AT 85°C—7.0 VOLT RATING AT 125°C 6.8 C T370C685(1 )010AS 1.0 6 22.0 D T370D226(1 )010AS CX06F226(2 ) T378D226(3 )010AS 2.0 6 33.0 E T370E336(1 )010AS CX06F336(2 ) T378E336(3 )010AS 3.0 6 100.0 F T370F107(1 )010AS CX06F107(2 ) T378F107(3 )010AS 9.0 8

15 VOLT RATING AT 85°C—10 VOLT RATING AT 125°C

15.0 D T370D156(1 )015AS CX06H156(2 ) T378D156(3 )015AS 2.0 6 22.0 E T370E226(1 )015AS CX06H226(2 ) T378E226(3 )015AS 3.0 6 68.0 F T370F686(1 )015AS CX06H686(2 ) T378F686(3 )015AS 9.0 8

20 VOLT RATING AT 85°C—13 VOLT RATING AT 125°C

3.3 C T370C335(1 )020AS 1.0 6 4.7 C T370C475(1 )020AS 1.0 6 10.0 D T370D106(1 )020AS CX06J106(2 ) T378D106(3 )020AS 2.0 6 15.0 E T370E156(1 )020AS CX06J156(2 ) T378E156(3 )020AS 3.0 6 47.0 F T370F476(1 )020AS CX06J476(2 ) T378F476(3 )020AS 9.0 8

25 VOLT RATING AT 85°C—17 VOLT RATING AT 125°C

2.2 C T370C225(1 )025AS 1.0 6 6.8 D T370D685(1 )025AS CX06K685(2 ) T378D685(3 )025AS 2.0 6 10.0 E T370E106(1 )025AS CX06K106(2 ) T378E106(3 )025AS 3.0 6 33.0 F T370F336(1 )025AS CX06K336(2 ) T378F336(3 )025AS 9.0 6 0.68 C T370C684(1 )035AS 1.0 6 1.0 C T370C105(1 )035AS 1.0 6 1.5 C T370C155(1 )035AS 1.0 6 2.2 D T370D225(1 )035AS CX06M225(2 ) T378D225(3 )035AS 2.0 6 3.3 D T370D335(1 )035AS CX06M335(2 ) T378D335(3 )035AS 2.0 6 4.7 D T370D475(1 )035AS CX06M475(2 ) T378D475(3 )035AS 2.0 6 6.8 E T370E685(1 )035AS CX06M685(2 ) T378E685(3 )035AS 3.0 6 10.0 F T370F106(1 )035AS CX06M106(2 ) T378F106(3 )035AS 9.0 6 15.0 F T370F156(1 )035AS CX06M156(2 ) T378F156(3 )035AS 9.0 6 22.0 F T370F226(1 )035AS CX06M226(2 ) T378F226(3 )035AS 9.0 6 TANTALUM MOLDED / RADIAL — MIL-PRF-49137/6 T370/T378 (CX06) SERIES 60 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET part number, insert capacitance tolerance symbol as follows: L = +40%, –20%; M = ±20%; K = ±10%; J = ±5%. (2) To complete military part number, insert capacitance tolerance symbol as follows: M = ±20%; K = ±10%. (3) To complete KEMET part number, insert capacitance tolerance symbol as follows: M = ±20%; K = ±10%.