T16XX-XXXG

BTA16 STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Table 1: Main Features

DESCRIPTION

Available either in through-hole or surface-mount packages, the BTA16, BTB16 and T16 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applica- tions such as static relays, heating regulation, in- duction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers, ... The snubberless versions (BTA/BTB...W and T16 series) are specially recommended for use on in- ductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rat- ed at 2500V RMS) complying with UL standards (File ref.: E81734). Symbol Value Unit IT(RMS) 16 A VDRM/VRRM 600, 700 and 800 V IGT (Q1) 10 to 50 mA BTA16, BTB16 and T16 Series 16A TRIACS REV. 7February 2006 SNUBBERLESS™, LOGIC LEVEL & STANDARD Table 2: Order Codes Part Number Marking BTA16-xxxxxRG See page table 8 on page 8BTB16-xxxxxRG T16xx-xxxG G D2PAK (T16-G) GA2 G TO-220AB Insulated (BTA16) TO-220AB (BTB16) G

BTA16, BTB16 and T16 Series Table 3: Absolute Maximum Ratings Tables 4: Electrical Characteristics (Tj = 25°C, unless otherwise specified) ■ SNUBBERLESS and Logic Level (3 quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) D2PAK / TO-220AB Tc = 100°C 16 A TO-220AB Ins. Tc = 15°C ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) F = 50 Hz t = 20 ms 160 A F = 60 Hz t = 16.7 ms 168 I²tI ²t Value for fusing tp = 10 ms 144 A²s dI/dt Critical rate of rise of on-state cur- rent IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz Tj = 125°C 50 A/µs VDSM/VRSM Non repetitive surge peak off-state voltage tp = 10 ms T j = 25°C VDSM/VRSM + 100 V IGM Peak gate current tp = 20 µs T j = 125°C 4A PG(AV) Average gate power dissipation Tj = 125°C 1W Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C Symbol Test Conditions Quadrant T16 BTA16 / BTB16 Unit T1635 SW CW BW IGT (1) VD = 12 V RL = 33 Ω I - II - III MAX. 35 10 35 50 mA VGT I - II - III MAX. 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C I - II - III MIN. 0.2 V IH (2) I T = 500 mA MAX. 35 15 35 50 mA IL IG = 1.2 IGT I - III MAX. 50 25 50 70 mA II 60 30 60 80 dV/dt (2) VD = 67 %VDRM gate open T j = 125°C MIN. 500 40 500 1000 V/µs (dI/dt)c (2) (dV/dt)c = 0.1 V/µs Tj = 125°C MIN. -8 . 5- - A/ms(dV/dt)c = 10 V/µs Tj = 125°C -3 . 0- - Without snubber Tj = 125°C 8.5 - 8.5 14

BTA16, BTB16 and T16 Series ■ Standard (4 quadrants) Table 5: Static Characteristics Table 6: Thermal resistance Symbol Test Conditions Quadrant BTA16 / BTB16 Unit CB IGT (1) VD = 12 V RL = 33 Ω I - II - III IV MAX. 25 100 mA VGT ALL MAX. 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C ALL MIN. 0.2 V IH (2) I T = 500 mA MAX. 25 50 mA IL IG = 1.2 IGT I - III - IV MAX. 40 60 mA II 80 120 dV/dt (2) VD = 67 %VDRM gate open T j = 125°C MIN. 200 400 V/µs (dV/dt)c (2) (dI/dt)c = 7 A/ms Tj = 125°C MIN. 5 10 V/µs Symbol Test Conditions Value Unit VT (2) I TM = 22.5 A tp = 380 µs T j = 25°C MAX. 1.55 V Vto (2) Threshold voltage Tj = 125°C MAX. 0.85 V Rd (2) Dynamic resistance Tj = 125°C MAX. 25 m Ω IDRM IRRM VDRM = VRRM Tj = 25°C MAX. 5µ A Tj = 125°C 2m A Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1. Symbol Parameter Value Unit Rth(j-c) Junction to case (AC) D2PAK / TO-220AB 1.2 °C/W TO-220AB Insulated 2.1 Rth(j-a) Junction to ambient S = 1 cm² D2PAK 45 °C/W TO-220AB / TO-220AB Insulated 60 S = Copper surface under tab.

BTA16, BTB16 and T16 Series Figure 12: Ordering Information Scheme (BTA16 and BTB16 series) Figure 13: Ordering Information Scheme (T16 series) Table 7: Product Selector Part Numbers Voltage (xxx) Sensitivity Type Package

600 V 700 V 800 V

BTA/BTB16-xxxB X X X 50 mA Standard TO-220AB BTA/BTB16-xxxBW X X X 50 mA Snubberless TO-220AB BTA/BTB16-xxxC X X X 25 mA Standard TO-220AB BTA/BTB16-xxxCW X X X 35 mA Snubberless TO-220AB BTA/BTB16-xxxSW X X X 10 mA Logic level TO-220AB T1635-xxxG X X 35 mA Snubberless D 2PAK BTB: non insulated TO-220AB package BT A 16 - 600 BW RG Triac series Insulation Current Voltage Sensitivity and type Packing mode A = insulated B = non insulated 16 = 16A 600 = 600V 700 = 700V 800 = 800V B = 50mA Standard BW = 50mA Snubberless C = 25mA Standard CW = 35mA RG = Tube Snubberless SW = 10mA Logic Level T 16 35 - 600 G (-TR) Triac series Sensitivity Voltage Package Packing mode Current 16 = 16A 35 = 35mA 600 = 600V 800 = 800V G = D PAK Blanck = Tube -TR = Tape & Reel

BTA16, BTB16 and T16 Series Figure 16: TO-220AB Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com C F Ø I L A B e M REF. DIMENSIONS Millimeters Inches A 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 ØI 3.75 3.85 0.147 0.151 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 M 2.60 0.102 Table 8: Ordering Information Ordering type Marking Package Weight Base qty Delivery mode BTA/BTB16-xxxyzRG BTA/BTB16xxxyz TO-220AB 2.3 g 50 Tube T1635-xxxG T1635xxxG D2PAK 1.5 g

50 Tube

T1635-xxxG-TR T1635xxxG 1000 Tape & reel Note: xxx = voltage, yy = sensitivity, z = type Table 9: Revision History Date Revision Description of Changes Oct-2002 6A Last update. 13-Feb-2006 7 TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added.

BTA16, BTB16 and T16 Series Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publicati on are subject to change without notice. This publication supersedes and replac es all information previously supplied. STMicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectro nics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Ital y - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America