T1635T-8G STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
- High static dV/dt High dynamic turn-off commutation (dl/dt)c
- 150 °C maximum junction temperature
- Three quadrants
- Surge capability V DSM, VRSM = 900 V
- Benefits: – High immunity to false turn-on thanks to high static dV/dt – Improved turn-off in high temperature environments thanks higher (dI/dt)c – Increase of thermal margin due to extended working T j up to 150 °C – Good thermal resistance due to non-insulated tab.
Applications
- General purpose AC line load switching
- Motor control circuits
- Home appliances
- Heating
- Lighting
- Inrush current limiting circuits
- Overvoltage crowbar protection
Description
Available in SMD, the T1635T-8G Triac can be used for the on/off or phase angle control function in general purpose AC switching where high commutation capability is required. The T1635T-8G can be used without a snubber RC circuit when the limits defined are respected. D2PAK package is UL-94,V0 flammability resin compliance. Package environmentally friendly Ecopack®2 graded (RoHS and Halogen Free compliance). Snubberless™ is a trademark of STMicroelectronics. Product status link T1635T-8G Product summary IT(RMS) 16 A VDRM/VRRM 800 V VDSM/VRSM 900 V IGT 35 mA
16 A - 800 V - D2PAK Snubberless™ T riac
DS12734 - Rev 1 - September 2018 For further information contact your local STMicroelectronics sales office. www .st.com
1 Characteristics
Table 1. Absolute maximum ratings (limiting values) Table 2. Electrical characteristics (Tj = 25 °C, unless otherwise specified)
- Minimum IGT is guaranteed at 5% of IGT max
For both polarities of A2 referenced to A1.
Table 3. Static characteristics
- For both polarities of A2 referenced to A1.
1.2 Characteristics curves
Figure 1. Maximum power dissipation versus on-state Figure 2. On-state RMS current versus case temperature Figure 3. On-state RMS current versus ambient Figure 4. Relative variation of thermal impedance versus
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www .st.com. ECOPACK® is an ST trademark.
2.1 D²PAK package information
- ECOPACK ®2 compliant
- Lead-free package leads finishing Molding compound resin is halogen-free and meets UL94 standard level V0
Figure 14. D²PAK package outline (1) Resin gate is accepted in each of position shown on the drawing, or their symmetrical.
Package information
Table 5. D²PAK package mechanical data
- Dimensions in inches are given for reference only
3 Ordering information
Figure 17. Ordering information scheme Table 6. Ordering information
1000 Tape and reel
Ordering information
DS12734 - Rev 1 page 10/12
Revision history
Table 7. Document revision history 12-Sep-2018 1 Initial release.