BTA16_V01 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 18

Technical content

Features

  • Medium current T riac
  • Low thermal resistance with clip bonding
  • Low thermal resistance insulation ceramic for insulated BTA
  • High commutation (4Q) or very high commutation (3Q, Snubberless™) capability
  • BTA series UL1557 certified (file ref: 81734)
  • Packages are RoHS (2002/95/EC) compliant
  • Insulated tab (BTA series, rated at 2500 V RMS)

Applications

  • Snubberless versions (BTA/BTB...W and T1635) especially recommended for use on inductive loads, because of their high commutation performances
  • On/off or phase angle function in applications such as static relays, light dimmers and appliance motor speed controllers

Description

Available either in through-hole or surface mount packages, the BTA16, BTB16 and T1610, T1635 and T1650 Triac series are suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers. The Snubberless™ versions (W suffix and T1610, T1635, T1650) are especially recommended for use on inductive loads, because of their high commutation performance. By using an internal ceramic pad, the Snubberless™ series provide an insulated tab (rated at 2500 VRMS) complying with UL standards (file reference: E81734). Product status link BTA16 BTB16 T1610 T1635 T1650 Product summary IT(RMS) 16 A VDRM/VRRM 600, 800 V IGTSnubberless™ 10, 35, 50 mA IGTstandard 25, 50 mA Snubberless™, logic level and standard 16 A Triacs T1610, T1635, T1650 BTA16, BTB16 Datasheet DS2114 - Rev 11 - May 2018 For further information contact your local STMicroelectronics sales office.

1 Characteristics

Table 1. Absolute maximum ratings Table 2. Static electrical characteristics

  1. For both polarities of A2 referenced to A1
  1. Minimum IGT is guaranteed at 5 % of IGT
  2. For both polarities of A2 referenced to A1

Table 4. Electrical characteristics (Tj = 25 °C, unless otherwise specified) - Snubberless and logic level (3

  1. Minimum I GT is guaranteed at 5 % of IGT
  2. For both polarities of A2 referenced to A1

Table 5. Thermal resistance

  1. Copper surface under tab.

1.1 Characteristics (curves)

Figure 2. Maximum power dissipation versus on-state Figure 3. RMS on-state current versus case temperature Figure 4. On-state rms current versus ambient Figure 5. Relative variation of thermal impedance versus

Figure 12. D²PAK thermal resistance junction to ambient versus copper surface under tab

2 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www .st.com. ECOPACK® is an ST trademark. T1610, T1635, T1650, BTA16, BTB16

Package information

2.1 TO-220AB Insulated and non Insulated package information

  • Epoxy meets UL 94,V0
  • Cooling method: by conduction (C) Recommended torque value: 0.55 N·m
  • Maximum torque value: 0.70 N·m

Figure 13. TO-220AB Insulated and non Insulated package outline (1)Resin gate position accepted in one of the two positions or in the symmetrical opposites.

Table 6. TO-220ABInsulated and non Insulated package mechanical data

  1. Inch dimensions are for reference only

2.2 D²PAK package information

Figure 14. D²PAK package outline

Table 7. D²PAK package mechanical data

  1. Dimensions in inches are given for reference only

Figure 15. D²PAK recommended footprint (dimensions are in mm)

3 Ordering information

Figure 16. Ordering information scheme (BTA16 and BTB16 series)

Ordering information

DS2114 - Rev 11 page 13/18

Figure 17. Ordering information scheme (T8 series) DS2114 - Rev 11 page 14/18

3.1 Product selector

Table 8. Product selector BTA16-600C 35 mA Standard TO-220AB Ins. BTA16-600B BTA16-800B 50 mA Standard TO-220AB Ins. BTA16-600SW BTA16-800SW 10 mA Snubberless™ TO-220AB Ins. BTA16-600CW BTA16-800CW 35 mA Snubberless™ TO-220AB Ins. BTA16-600BW BTA16-800BW 50 mA Snubberless™ TO-220AB Ins.

3.2 Ordering information

Table 9. Ordering information

1000 Tape and reel

DS2114 - Rev 11 page 16/18

Revision history

Table 10. Document revision history Date Revision Changes Oct-2002 6A Last update. 13-Feb-2006 7 TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added. 03-Jul-2009 8 Added part number T1610. 04-Dec-2009 9 Updated value for VDSM / VRSM in Table 2. Updated temperature in T able 2 from 15 °C to 86 °C. 11-Mar-2010 10 Updated value for VDSM / VRSM in Table 2. Updated temperature in T able 2 from 15 °C to 86 °C. 30-May-2018 11 Updated Section ● Product status / summary. Added T1650 package information. T1610, T1635, T1650, BTA16, BTB16 DS2114 - Rev 11 page 17/18