T1235H_06 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Table 1: Main Features

DESCRIPTION

Specifically designed for use in high temperature environment (found in hot appliances such as cookers, ovens, hobs, electric heaters, coffee ma- chines...), the new 12 Amps T1235H triacs provide an enhanced performance in terms of power loss and thermal dissipation. This allows for optimiza- tion of the heatsinking dimensioning, leading to space and cost effectivness when compared to electro-mechnical solutions. Based on ST snubberless technology, they offer high commutation switching capabilities and high noise immunity levels. And, thanks to their clip as- sembly technique, they provide a superior per- formance in surge current handling. Symbol Value Unit I T(RMS) 12 A VDRM/VRRM 600 V IGT (Q1) 35 mA T1235H 12A TRIACS REV. 6February 2006 SNUBBERLESS™ HIGH TEMPERATURE Table 2: Order Codes Part Number Marking T1235H-600G T1235H600G T1235H-600G-TR T1235H600G T1235H-600TRG T1235H600T A2A1 G D2PAK (T1235H-600G) G TO-220AB (T1235H-600T) G Table 3: Absolute Maximum Ratings Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Tc = 135°C 12 A ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) F = 50 Hz t = 20 ms 140 A F = 60 Hz t = 16.7 ms 145 I²tI ²t Value for fusing tp = 10 ms 112 A²s dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz Tj = 150°C 50 A/µs VDSM/VRSM Non repetitive surge peak off-state voltage tp = 10 ms T j = 25°C 700 V IGM Peak gate current tp = 20 µs T j = 150°C 4A PG(AV) Average gate power dissipation Tj = 150°C 1W Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 150 °C

Tables 4: Electrical Characteristics (Tj = 25°C, unless otherwise specified) Table 5: Static Characteristics Table 6: Thermal resistance Symbol Test Conditions Quadrant Value Unit IGT (1) VD = 12 V RL = 33 Ω I - II - III MAX. 35 mA VGT I - II - III MAX. 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 150°C I - II - III MIN. 0.15 V IH (2) I T = 100 mA MAX. 35 mA IL IG = 1.2 IGT I - III MAX. mA II 80 dV/dt (2) VD = 67 %VDRM gate open Tj = 150°C MIN. 300 V/µs (dI/dt)c (2) Without snubber Tj = 150°C MIN. 5.3 A/ms Symbol Test Conditions Value Unit VT (2) I TM = 17 A tp = 380 µs T j = 25°C MAX. 1.55 V Vto (2) Threshold voltage Tj = 150°C MAX. 0.80 V Rd (2) Dynamic resistance Tj = 150°C MAX. 25 m Ω IDRM IRRM VDRM = VRRM Tj = 25°C MAX. 5µ A Tj = 150°C 5.5 mAVDRM/VRRM = 400V (at mains peak voltage) Tj = 150°C 3.5 Note 1: minimum IGT is guaranted at 10% of IGT max. Note 2: for both polarities of A2 referenced to A1. Symbol Parameter Value Unit Rth(j-c) Junction to case (AC) D2PAK 1.2 °C/W TO-220AB Rth(j-a) Junction to ambient S = 1 cm² D2PAK 45 °C/W TO-220AB 60 S = Copper surface under tab.

Figure 17: TO-220AB and TO-220AB Insulated Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com M B C A F L I e REF. DIMENSIONS Millimeters Inches A 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 B 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 C 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 F 6.20 6.60 0.244 0.259 I 3.75 3.85 0.147 0.151 L 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 M 2.60 0.102 Table 8: Ordering Information Ordering type Marking Package Weight Base qty Delivery mode T1235H-600TRG T1235H600T TO-220AB 2.3 g 50 Tube T1235H-600G T1235H600G D2PAK 1.5 g

50 Tube

T1235H-600G-TR T1235H600G 1000 Tape & reel Table 9: Revision History Date Revision Description of Changes Apr-2002 5A Last update. 13-Feb-2006 6 TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added.

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publicati on are subject to change without notice. This publication supersedes and replac es all information previously supplied. STMicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectro nics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Ital y - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America