T1133D-S MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T11/12/21/22_D/S A/2-2008 Page 1 of 2 ACTIVE SIGNAL AMPLIFIER Iin &Iout T11/12/21/22_D/S PRODUCT PROGRAM Part Number Power Supply Input Output Isolation Power Output Channels T1133D/S 24V 4-20mA 4-20mA 24V 1 T1130D/S 24V 4-20mA 4-20mA NONE 1 T1230D/S 24V 4-20mA 0-20mA NONE 1 T2133D/S 24V 0-20mA 4-20mA 24V 1 T2233D/S 24V 0-20mA 0-20mA 24V 1 T2230D/S 24V 0-20mA 0-20mA NONE 1 Note: We could also offer customer design for special input and output.

ELECTRICAL CHARACTERISTICS

Power Supply (Nominal Power Supply) ±5% Power consumption ≤2W Power Supply Data Power Protection Reverse protection Output Voltage (Nominal) ±10% Isolation Power Output Data Output Current ≤25mA Input Signal See above Input Impedance Voltage Drop ≤250mV(At input=20mA) Input Data Overload ≤300mA Output Signal See above Output Data Load ≤500Ω（At output=20mA） TRANSMISSION CHARACTERISTICS Offset 0.1%F.S. Gain Error 0.1%F.S. Temperature Drift 0.0035%F.S./ ℃ (-25°C to +71 °C) ISOLATION CHARACTERISTICS Galvanic Isolation Four-port isolation （Among input, output, power supply and Isolation Power output） Isolation Voltage 2.5KVDC (Tested for 1minute and 1mA max, humidity < 70%) Insulation Resistance 1000MΩ, 500VDC(Among signal input, signal output, power supply and isolation power output) OTHER CHARACTERISTICS Operation temperature:-25℃ to +71 ℃ Ambient temperature Transport and Storage temperature:-50℃ to +105 ℃ Weight About 10g The Environment in use No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded

DESCRIPTION

The series is a high integration, high efficiency polygonal - line active isolation amplifier module, with anterior circuit current signal input and posterior current signal output. These modules are embed with a high efficiency isolated micro-power source, which can provide a electrics-feed for signal input. In the two-wire three-wire and four-wire circuit applications, our products largely predigest customers’ design helpfully improve the using room ratio of PCB. Adopting electromagnetism isolation technology, it is available to keep high accuracy and natural extremely low temperature drift. The isolation voltage among the input, output, power supply and isolated power output can up to 2.5KVDC.

FEATURES

  • Four-port isolation（Among input, output, power supply and Isolation Power output ）
  • High accuracy (0.1% F.S.)
  • High linearity (0.1% F.S.)
  • Isolation voltage(2500VDC/60S)
  • High frequency response(15KHz)
  • Extremely low temperature(35PPM/ °C)
  • Industry standard(Operating Temperature Range:-25°C to 71°C)
  • High reliability(MTBF＞500,000 hours) MODEL SELECTION TXXXXD Package style Isolationpower output Powersupply Output Input IsolationAmplifier MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Note: 1. All specifications measured at TA=25 °C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions.

The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T11/12/21/22_D/S A/2-2008 Page 2 of 2 SCHEMATIC DIAGRAM APPLICATION NOTE Iin+ Iin- Iout+ Iout- 12- 11+ 24- 23+ 13- 14+ Isolation Power Output Signal input Power supply Signal output APPLICATION CIRCUIT DIAGRAM 2414 13151620212223 234511 109 Pin+ Pin- NC Sin+ Sout- NC NC NC NC Sou t+ NC NC NC Sin- Output Pout- Pou t+ TxxxxDNC NC Input Power Supply Isolation Power Output 1. Please read instruction book carefully before using the product. If you have any question, please contact with our technical support. 2. Please don ’t install in the dangerous zone. 3. The power supply is direct voltage. 220V alternating current is forbidden.. 4. Don ’t divide the product privately in case the equipments ineffective or go wrong. AFTER SERVICE 1. Products are carefully inspected and controlled before going out from our factory. If they operated abnormally or there were something wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. 2. 3 years warranty since the delivery date. During the period of quality guarantee ，our company will repair or change free of charge if product has any quality problem in the process of normally using. APPLICATION CIRCUITS See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. PACKAGING SIZE AND TERMINAL DESCRIPTION RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances:0.10mm(0.004inch) General tolerances0.25mm(0.010inch) :±± 24(Vin-) Others NC FOOTPRINT DETAILS PIN FUNCTION Output- Output+ Input+ Isolation Power Output- Isolation Power Output+ Power Supply+ Power Supply- NC:No Connection PIN FUNCTION Vin- 21345910 11 14151620212223 1324 2.00 (0.079) 1.00 (0.039) 10.20 (0.397) 32.30(1.272) (0.560) 18.60(0.732) 10.20 4.00 0.65 27.94(1.100) (0.157) (0.397) (0.026) 14.40 32.30(1.272) (0.560) Vin- 21 3 4 5 9 101112 14151620212223 1324 First Angle Projection 0.70 (0.028) (0.012) (0.028) 19.24(0.757)