DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SIDACtor® Protection Thyristors 176 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) T10A Series - DO-15

Electrical Characteristics

T10A Series are SIDACtor® devices designed protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a cost effective through-hole solution that enables equipment to comply with global regulatory standards.

Description

Features and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Low Capacitance Agency Approvals Agency Agency File Number E128662 Schematic Symbol Pinout Designation Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amp Capacitance @ 1MHz, 2V Bias V Min V Max mA Min mA Max A Max V Max pF Typ T10A060Bxx T10A060B 50 84 120 800 2.2 4 50 T10A060Exx T10A060E 50 84 180 800 2.2 4 50 T10A062xx T10A062 56 86 150 800 2.2 4 50 T10A068xx T10A068 61 94 150 800 2.2 4 50 T10A080Bxx T10A080B 70 125 120 800 2.2 4 43 T10A080Exx T10A080E 70 125 180 800 2.2 4 43 T10A100xx T10A100 90 140 150 800 2.2 4 43 T10A110Bxx T10A110B 100 142 120 800 2.2 4 38 T10A110Exx T10A110E 100 142 180 800 2.2 4 38 T10A120xx T10A120 108 168 150 800 2.2 4 38 T10A130xx T10A130 117 178 150 800 2.2 4 38 T10A140Bxx T10A140B 120 178 120 800 2.2 4 34 T10A140Exx T10A140E 120 178 180 800 2.2 4 34 T10A180xx T10A180 170 220 150 800 2.2 4 34 T10A180Bxx T10A180B 170 220 120 800 2.2 4 32 T10A180Exx T10A180E 170 220 180 800 2.2 4 32 T10A200xx T10A200 180 275 150 800 2.2 4 30 T10A220xx T10A220 200 275 150 800 2.2 4 30 Applicable Global Standards t TIA-968-A t TIA-968-B t ITU K.20/21 Enhanced Level* t ITU K.20/21 Basic Level t GR 1089 Inter-building* t GR 1089 Intra-building t IEC 61000-4-5 t YD/T 1082 t YD/T 993 t YD/T 950 *A-rated parts require series resistance Not Applicable T able continues on next page.

SIDACtor® Protection Thyristors 177 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Package Symbol Parameter Value Unit DO-15 TJ Operating Junction Temperature Range UP TS Storage Temperature Range UP R0JA Thermal Resistance: Junction to Ambient 120 °C/W Thermal Considerations Surge Ratings Series IPP ITSM 50/60 Hz di/dt8x201 1.2x502 5x3101 10x7002 10x10001 10x10002 A min A min A min A min A/μs max A 100 37 .5 50 20 100 Electrical Characteristics (continued) Part Number Marking VDRM @lDRM=5μA VS @100V/μs IH IS IT VT @IT=2.2 Amp Capacitance @ 1MHz, 2V Bias V Min V Max mA Min mA Max A Max V Max pF Typ T10A220Bxx T10A220B 200 275 120 800 2.2 4 30 T10A220Exx T10A220E 200 275 180 800 2.2 4 30 T10A240xx T10A240 216 330 150 800 2.2 4 30 T10A270xx T10A270 245 370 150 800 2.2 4 30 T10A270Bxx T10A270B 245 370 120 800 2.2 4 30 T10A270Exx T10A270E 245 370 180 800 2.2 4 30 IH IT IS IDRM VDRMVT +V-V VS 100 tr td Peak Value Half Value t – Time (μs) IPP – Peak Pulse Current – %I PP tr = rise time to peak value td = decay time to half value Waveform = t r x td V-I Characteristics tr x td Pulse Waveform Notes:

1 Current waveform in μs

2 Voltage waveform in μs

Notes: t"CTPMVUFNBYJNVNSBUJOHTNFBTVSFEBU5A= 25ºC (unless otherwise noted). t%FWJDFTBSFCJEJSFDUJPOBM VOMFTTPUIFSXJTFOPUFE tXX1BSU/VNCFS4VGmTiRPw 3FFM1BDL PSBlank (Bulk Pack) - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP - The device must initially be in thermal equilibrium with -40°C < TJ <

SIDACtor® Protection Thyristors 178 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) 25°C Case Temperature (TC) - ºC 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of IH IH (TC = 25ºC) Normalized VS Change vs. Junction T emperature Normalized DC Holding Current vs. Case T emperature Soldering Parameters Time T emperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Figure 1Reflow Condition Pb-Free assembly (see Fig. 1) Pre Heat - Temperature Min (Ts(min)) - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 60-150 secs. Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C Percent of VS Change – % 25 °C Physical Specifications Environmental Specifications Lead Material Copper Alloy T erminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 High T emp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS 504 or 1008 hrs. MIL -STD-750 (Method 1040) JEDEC, JESD22-A-101 T emp Cycling ¡$UP NJOEXFMM VQUP cycles. MIL -STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased T emp & Humidity 52 V DC VQUPIST&*" JEDEC, JESD22-A-101 High T emp Storage ¡$IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low T emp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP NJOEXFMM TFDUSBOTGFS 10 cycles. MIL -STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker T est) BUN VQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat TFDT.*-45% .FUIPE Moisture Sensitivity Level IST SFnPXDZDMFT ¡$1FBL +&%&$+45% -FWFM

SIDACtor® Protection Thyristors 179 Revised: February 22, 2011 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Baseband Protection (Voice-DS1) Packing Options Package Type Description Packaging Quantity Added Suffix Industry Standard T10A DO-15 Tape and Reel Pack 1000 RP EIA-RS-296-D DO-15 Bulk Pack 500 N/A N/A T ape and Reel Specification— DO-15 Spacing off center, either side 0.039 (1.0) B C A D E recess depth max 0.75” 2.55 (64.8) TYP 3.15 (80.0) TYP Dimensions are in inches (and millimeters). Direction of FeedG F Symbols Description Inches MM A Component Spacing (lead to lead) œw 5.08 ± 0.508 B Inner Tape Pitch œw 52.37 ± 1 .498 C Tape Width w 6.35 D Max. Off Alignment w 1 .219 E Reel Dimension w 330.2 F Max. Hub Recess w 76.19 G Max. Abor Hole w 17 .27 Part MarkingPart Numbering MEDIAN VOLTAGE PACKING OPTIONS Blank: Bulk RP: Reel Pack TYPE T10A = SIDACtor T10A series T10A xxx x xx HOLDING CURRENT: Blank: 150mA B: 120mA E: 180mA T10Axxxx Part Marking Code (Refer to Electrical Characteristics Table) XXXXX Date Code Dimensions — DO-15 L LG D B Dimension Inches Millimeters MIN MAX MIN MAX B 0.028 0.034 0.711 0.864 D 0.12 0.14 3.048 3.556 G 0.235 0.27 5.969 6.858 L 1 25.4