T1035 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
- Medium current Triac
- Low thermal resistance with clip bonding
- Low thermal resistance insulation ceramic for insulated BTA
- High commutation (4Q) or very high commutation (3Q, Snubberless™) capability
- BTA series UL1557 certified (file ref: 81734)
- Packages are RoHS (2002/95/EC) compliant
Description
Available either in through-hole or surface mount packages, the BTA10, BTB10 and T10xx Triac series are suitable for general purpose mains power AC switching. They can be used as ON/OFF function in applications such as static relays, heating regulation or induction motor starting circuit. They are also recommended for phase control operations in light dimmers and appliance motors speed controllers. The Snubberless™ versions (W suffix and T10xx) are especially recommended for use on inductive loads, because of their high commutation performance. By using an internal ceramic pad, the Snubberless™ series provide an insulated tab (rated at 2500 VRMS) complying with UL standards (file reference: E81734). Product status link BTA10, BTB10, T1035, T1050 Product summary IT(RMS) 10 A VDRM/VRRM 600 and 800 V IGT 25 to 50 mA
10 A Snubberless™, logic level and standard Triacs
BTA10, BTB10 T1035, T1050 Datasheet DS3165 - Rev 9 - March 2019 For further information contact your local STMicroelectronics sales office.
1 Characteristics
Table 1. Absolute maximum ratings Table 2. Static electrical characteristics
- For both polarities of A2 referenced to A1
Table 3. Electrical characteristics (Tj = 25 °C, unless otherwise specified) - Snubberless™ (3 quadrants)
- Minimum I GT is guaranteed at 5 % of IGT max.
- For both polarities of A2 referenced to A1
Table 4. Electrical characteristics (Tj = 25 °C, unless otherwise specified) - standard Triac (4 quadrants)
- Minimum I GT is guaranteed at 5 % of IGT max.
- For both polarities of A2 referenced to A1
Table 5. Thermal resistance
- Copper surface under tab.
1.1 Characteristics (curves)
Figure 2. Maximum power dissipation versus on-state Figure 3. RMS on-state current versus case temperature Figure 4. Relative variation of thermal impedance versus Figure 5. On-state characteristics (maximum values) Figure 6. Surge peak on-state current versus number of Figure 7. Non repetitive surge peak on-state current
2 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
2.1 D²PAK package information
Figure 12. D²PAK package outline (1) Resin gate is accepted in each of position shown on the drawing, or their symmetrical. Table 6. D²PAK package mechanical data
Package information
- Dimensions in inches are given for reference only
Figure 13. D²PAK recommended footprint (dimensions are in mm)
Figure 14. TO-220AB non ins. and insulated package outline (1)Resin gate position accepted in one of the two positions or in the symmetrical opposites. Table 7. TO-220AB non ins. and insulated package mechanical data
Ref. Dimensions Millimeters Inches1 c1 0.49 0.70 0.0193 0.0276 c2 2.40 2.72 0.0945 0.1071 e 2.40 2.70 0.0945 0.1063 F 6.20 6.60 0.2441 0.2598 I 3.73 3.88 0.1469 0.1528 L 2.65 2.95 0.1043 0.1161 I2 1.14 1.70 0.0449 0.0669 I3 1.14 1.70 0.0449 0.0669 M 2.6 0.1024 1. Inch dimensions are for reference only. BTA10, BTB10, T1035, T1050 TO-220AB non ins. and insulated package information DS3165 - Rev 9 page 9/12
3 Ordering information
Figure 15. BTA10 and BTB10 series ordering information scheme Figure 16. T10xx series ordering information scheme Table 8. Ordering information
50 Tube
1000 Tape and reel 13"
Ordering information
Revision history
Table 9. Document revision history 06-Feb-2017 7 Added D²PAK package information. Section 2.1 D²PAK package information. 01-Mar-2019 9 Updated Links syntax.