T102J1ABE2

T101J1ABE2 CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

G–46 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker T Series Subminiature Rocker Switches Models Available Features/Benefits

• Compact size—small footprint
• Single and double pole models
• PC and panel mounting options available
• RoHS compliant Typical Applications
• Telecommunications
• Instrumentation
• Medical Equipment Specifications CONTACT RATING: Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page H-50 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2–4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with B, G, P , Q or R contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame retardant, heat stabilized. ACTUATOR: Nylon, black standard. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. MOUNTING BRACKET: Stainless steel. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page G-50 for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page G-53 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut, Screws & Lockwasher: Stainless steel. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appr opriate box. Available options are shown and described on pages G-47 through G-51. For additional options not shown in catalog, consult Customer Service Center . All models have epoxy terminal seal and ar e compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SP On-None-On T102 SP Off-None-On T103 SP On-Off-On T105 SP Mom.-Off-Mom. T107 SP On-Off-Mom. T201 DP On-None-On T205 DP Mom.-Off-Mom. Actuator J1 Rocker, .300" wide J6 Rocker, .230" wide Terminations A Right angle, PC thru-hole AV Vertical Right angle, PC thru-hole Z Solder lug V3 V-bracket Contact Material B Gold P Gold, matte-tin Q Silver G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Actuator Color

2 Black

G–47 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com T Series Subminiature Rocker Switches SWITCH FUNCTION DPDT 2-1,5-4 N/A OPEN 2-3,5-6 ON NONE ON MOM. OFF MOM. T201 T205 DP SPDT SPST 2-1 3-1 N/A OPEN N/A 2-3 OPEN ON NONE ON ON OFF ON MOM. OFF MOM. ON OFF MOM. OFF NONE ON T101 T103 T105 T107 T102 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 SWITCH FUNCTION POS. 1 POS. 2 POS. 3 MODEL NO. NO. POLES DPDT SPDT Part number shown: T101J1ZBE2 Part number shown: T201J1ZBE2 MOM. = Momentary All models with all options when ordered with G, Q or R contact material. Terminal Nos. For Reference Only Terminal Nos. For Reference Only C&K marking on opposite sideC&K marking on opposite side PANEL MOUNTING PANEL MOUNTING ACTUATOR COLOR

Subminiature Rocker Switches ACTUATOR PC MOUNTING SP DP Actuators available separately, see page G 51- G53. Finish: Matte. Other colors, custom actu- ator markings and legends available, consult Customer Service Center. J1 ROCKER, .300 WIDE A RIGHT ANGLE, PC THRU-HOLE Z SOLDER LUG J6 ROCKER, .230 WIDE TERMINATIONS SP and DP T101J6ABE2 Horizontal Actuation SPDT Standard with all models except T10X with A terminations. Standard with T10X model with A terminations. Not available with P or R contact material. Not available with T102 model. J6 actuator standard only on T10X models with A terminations. ACTUATOR G–48 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Subminiature Rocker Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET AV VERTICAL RIGHT ANGLE, PC THRU-HOLE AV VERTICAL RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE NOTE: Terminal bend radii and lead-in manufacturing option. NOTE: Terminal bend radii and lead-in manufacturing option. T201J1ABE2 Horizontal Actuation DPDT T101J1AVBE2 Vertical Actuation SPDT T201J1AVBE2 Vertical Actuation DPDT T101J1V3BE2 SPDT G Rocker G–49 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Subminiature Rocker Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET CONTACT MATERIAL * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate.

3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with B, G, P , Q & R contact material are RoHS compliant. All models with all options when ordered with G, Q, or R contact material. B contact material standard with A, AV, V3 terminations. Q contact material standard with C & Z terminations. P & R contact materials not available with Z terminations. SEAL E EPOXY SEAL T201J1V3BE2 DPDT 0.4 VA MAX. @ 20 V AC OR DC MAX. TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. RATINGS B P Q G OPTION CODE CONTACT MATERIAL TERMINAL PLATING LOW LEVEL/ DRY CIRCUIT POWER LOW LEVEL/DRY CIRCUIT OR POWER GOLD 1 MATTE-TIN 6 SILVER 5 GOLD 3 GOLD 3 SILVER 4,5 GOLD OVER SILVER 2,3 R MATTE-TIN 6 G–50 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com G Rocker

Subminiature Rocker Switches AVAILABLE HARDWARE J1 Actuator PART NO.

468002263 BLACK

Material: Nylon Finish: Matte J6 Actuator PART NO.

468102263 BLACK

Material: Nylon Finish: Matte NOTE: Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. TYPICAL ASSEMBLY SCREW PANEL THICKNESS STAND-OFF LOCKWASHER NUT STAND-OFF LENGTH Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. See part numbers below. PART NO. PANEL THK. STANDOFF LENGTH 761101000 1/16 IN. (1,59) .295 (7,49) 761102000 3/32 IN. (2,38) .264 (6,71) 761103000 1/8 IN. (3,18) .233 (5,92) G Rocker G–51 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com