SX01E LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
183©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series
1 Amp Standard SCRs
1.0A SCRs Sx01E & SxN1 Series
Description
Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less than 1 .5V potential. Features & Benefits t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 600 V t4VSHFDBQBCJMJUZVQUP 30 A Schematic Symbol Main Features Symbol Value Unit IT(RMS) 1A VDRM/VRRM 400 to 600 V I(5 10 mA Absolute Maximum Ratings — Standard SCRs Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current T C = 90°C 1 A IT(AV) "WFSBHFPOTUBUFDVSSFOU TC = 90°C 0.64 A ITSM 1FBLOPOSFQFUJUJWFTVSHFDVSSFOU TJOHMFIBMGDZDMF G TJ (initial) = 25°C 25 A TJOHMFIBMGDZDMF G TJ (initial) = 25°C 30 I2tI 2t Value for fusing t p = 8.3 ms 3.7 A 2s di/dt Critical rate of rise of on-state current G 5J = 125°C 50 A/μs I(. Peak gate current TJ = 125°C 1. 5 A P( "7 "WFSBHFHBUFQPXFSEJTTJQBUJPO TJ = 125°C 0.3 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C
Applications
5ZQJDBMBQQMJDBUJPOTBSF"$TPMJETUBUFTXJUDIFT nVJEMFWFMTFOTPST TUSPCFT BOEDBQBDJUJWFEJTDIBSHF JHOJUJPOTZTUFNT AK G
Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions Value Unit I(5 VD 3L = 60 8 MAX. 10 mA MIN. 1 V(5 MAX. 1 .5 V EWEU VD = VDRM HBUFPQFO 5J = 100°C MIN. V/μs VD = VDRM HBUFPQFO 5J = 125°C 40 V(% VD = VDRM 3L = 3.3 k8 5J = 125°C MIN. 0.2 V I) IT = 200mA (initial) MAX. 30 mA tq (1) MAX. 35 μs tgt I( = 2 x I(5 *T = 2A TYP . 2 μs (1) IT Up EWEU 7T EJEU "T Static Characteristics Symbol Test Conditions Value Unit VTM IT Up T MAX. 1 .6 V IDRM / IRRM VDRM = VRRM TJ = 25°C MAX. μATJ = 100°C 200 TJ = 125°C 500 Thermal Resistances Symbol Parameter Value Unit RR(J-C) Junction to case (AC) Sx01E 50 °C/W SxN1 35* RR(J-A) Junction to ambient Sx01E 145 °C/W /PUFTY WPMUBHF * = Mounted on 1 cm2 copper (two-ounce) foil surface
185©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series 1.0A SCRs Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature Figure 2: Normalized DC Gate T rigger Voltage vs. Junction T emperature Junction Temperature (TJ) -- (°C) Ratio of IGT / IGT (TJ = 25°C) 125 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 110 Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. RMS On-State Current Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: On-State Current vs. On-State Voltage (T ypical) 125 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 110 Junction Temperature (T J) -- (°C) Ratio of VGT / VGT (TJ = 25°C) 125 0.0 0.5 1.0 1.5 2.0 -40- 1 5 10 3 5 60 8 5 110 Junction Temperature (TJ) -- (°C) Ratio of IH/IH (TJ = 25°C) TJ = 25°C Instantaneous On-state Voltage (v T) – Volts Instantaneous On-state Current (iT) – Amps 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 RMS On-State Current [IT(RMS)] - Amps Average On-State Power Dissipation [PD(AV)] - (Watts) 100 105 110 115 120 125 130 RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Case Temperature (TC) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180°
Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series Figure 7: Maximum Allowable Case T emperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient T emperature vs. RMS On-State Current Figure 9: Maximum Allowable Ambient T emperature vs. Average On-State Current 100 105 110 115 120 125 130 Average On-State Current [I T(AVE)] - Amps Maximum Allowable Case Temperature (TC) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 100 120 RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 100 120 Average On-State Current [I T(AVE)] - Amps Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Figure 11: Peak Capacitor Discharge Current Derating Figure 10: Peak Capacitor Discharge Current 100 0.5 1.0 10.0 50.0 Pulse Current Duration (tW) - ms Peak Discharge Current (ITM) - Amps ITRM tW 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 25 50 75 100 125 150 Case Temperature (TC) - °C Normalized Peak Current
187©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series 1.0A SCRs 0.1 1.0 10.0 100.0 1 10 100 1000 Surge Current Duration -- Full Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps Figure 12: Surge Peak On-State Current vs. Number of Cycles 4611-:'3&26&/$:)[4JOVTPJEBM -0"%3FTJTUJWF RMS On-State Current: [I T(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: (BUFDPOUSPMNBZCFMPTUEVSJOHBOEJNNFEJBUFMZ GPMMPXJOHTVSHFDVSSFOUJOUFSWBM 0WFSMPBENBZOPUCFSFQFBUFEVOUJMKVODUJPO UFNQFSBUVSFIBTSFUVSOFEUPTUFBEZTUBUF SBUFEWBMVF Soldering Parameters Reflow Condition 1Co'SFFBTTFNCMZ Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) oTFDPOET Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do
Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied T emperature Cycling MIL-STD-750, M-1051, DZDMFT ¡$UP NJO dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 IPVST 7%$¡$ SFMIVNJEJUZ High T emp Storage MIL-STD-750, M-1031, IPVST Low-T emp Storage IPVST Thermal Shock MIL-STD-750, M-1056 DZDMFT ¡$UP¡$ NJOEXFMM UJNFBUFBDIUFNQFSBUVSF TFD NBY transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability "/4*+45% DBUFHPSZ 5FTU" Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish .BUUF5JOQMBUFE Body Material 6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ classification 94V-0 Lead Material $PQQFS"MMPZ Design Considerations $BSFGVMTFMFDUJPOPGUIFDPSSFDUEFWJDFGPSUIFBQQMJDBUJPOT PQFSBUJOHQBSBNFUFSTBOEFOWJSPONFOUXJMMHPBMPOHXBZ UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE design practice should limit the maximum continuous DVSSFOUUISPVHIUIFNBJOUFSNJOBMTUPPGUIFEFWJDF SBUJOH0UIFSXBZTUPFOTVSFMPOHMJGFGPSBQPXFSEJTDSFUF semiconductor are proper heat sinking and selection of WPMUBHFSBUJOHTGPSXPSTUDBTFDPOEJUJPOT0WFSIFBUJOH PWFSWPMUBHF JODMVEJOHEWEU BOETVSHFDVSSFOUTBSF the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions – TO-92 (E Package) Dimension Inches Millimeters Min Max Min Max A 0.176 0.196 4.47 4.98 B 0.500 12.70 D 0.095 0.105 2.41 2.67 E 0.150 3.81 F 0.046 0.054 1 .16 1 .37 ( 0.135 0.145 3.43 3.68 ) 0.088 0.096 2.23 2.44 J 0.176 0.186 4.47 4.73 K 0.088 0.096 2.23 2.44 L 0.013 0.019 0.33 0.48 M 0.013 0.017 0.33 0.43 "MMMFBETJOTVMBUFEGSPNDBTF$BTFJTFMFDUSJDBMMZOPODPOEVDUJWF A B TC Measuring Point Gate AnodeCathode E H G F D K J L M
189©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series 1.0A SCRs Product Selector Part Number Voltage Gate Sensitivity Type Package 400V 600V 800V 1000V Sx01E X X 10mA Standard SCR TO-92 SxN1 X X 10mA Standard SCR Compak Note: x = Voltage Dimensions - Compak (C Package) 0.079 (2.0) 0.040 (1.0) 0.030 (0.76) 0.079 (2.0) 0.079 (2.0) 0.110 (2.8) Pad Outline H KJE F L G A C B M D N P Gate Cathode Anode TC / TL Temperature Measurement Point Dimensions are in inches (and millimeters). Dimension Inches Millimeters Min Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 ( 0.002 0.008 0.05 0.20 ) 0.077 0.104 1 .95 2.65 J 0.043 0.053 1 .09 1 .35 K 0.006 0.016 0.15 0.41 L 0.030 0.055 0.76 1 .40 M 0.022 0.028 0.56 0.71 N 0.027 0.033 0.69 0.84 P 0.052 0.058 1 .32 1 .47 Packing Options Part Number Marking Weight Packing Mode Base Quantity Sx01E Sx01E 0.19 g Bulk 2000 Sx01ERP Sx01E 0.19 g Reel Pack 2000 Sx01EAP Sx01E 0.19 g Ammo Pack 2000 SxN1RP SxN1 0.08 g Embossed Carrier 2500 Note: x = Voltage
Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-B 1994 Standards TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-B 1994 Standards 0.708 (18.0) 1.6 (41.0) 0.5 (12.7) 0.1 (2.54) 0.2 (5.08) 0.236 (6.0) 0.02 (0.5) Direction of Feed Dimensions are in inches (and millimeters). 1.97 (50.0) 14.17(360.0) Flat up 1.26 (32.0) 0.098 (2.5) MAX Cathode Anode Gate 0.354 (9.0) 0.157 DIA (4.0) Flat down
25 Devices per fold
(and millimeters). 0.708 (18.0) 1.62 (41.2) 0.5 (12.7) 0.1 (2.54) 0.2 (5.08) 0.236 (6.0) 0.02 (0.5) 1.85 (47.0) 13.3 (338.0) 1.27 (32.2) 0.098 (2.5) MAX 12.2 (310.0) 1.85 (47.0) 0.354 (9.0) 0.157 DIA(4.0)
191©2010 Littelfuse, Inc Revised: March 31, 2010 03:44 PM T eccor® brand Thyristors Specifications are subject to change without notice. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sx01E & SxN1 Series 1.0A SCRs Part Numbering System Part Marking System yxxxx S6N1 Compak (C Package)TO-92 (E Package) S601E yxxxx DEVICE TYPE S: SCR xx: Lead Form Option PACKAGE TYPE E: TO-92 SCR N: Compak CURRENT RATING Lead Form Dimensions 01: 1A (TO-92) N: 1A (Compak) VOLTAGE RATING 4: 400V 6: 600V SENSITIVITY & TYPE S 6 01 E mA[blank]: 10 1: 10 mA (TO-92) (Compak) Compak Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-1 Standards 8.0 Anode Cathode Gate 0.47 (12.0) 0.36 (9.2) 0.315 (8.0) 0.157 (4.0) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape
Revised: March 31, 2010 03:44 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice.