SW069R10VS SEMIPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

 High ruggedness  Low RDS(ON) (Typ 7.1mΩ)@VGS=10V  Low Gate Charge (Typ 45nC)  Improved dv/dt Capability  100% Avalanche Tested  Application: Li Battery Protect Board, Synchronous Rectification, Inverter General Description This power MOSFET is produced with advanced technology of SAMWIN. This technology enable the power MOSFET to have better characteristics, including fast switching time, low on resistance, low gate charge and especially excellent avalanche characteristics. BVDSS : 100V ID : 70A RDS(ON) : 7.1mΩ@VGS=10V 9.0mΩ@VGS=4.5V G D S DFN5*6 TO-251 TO-252 1 2 TO-220 1 2 3 G(4) D(5,6,7,8) S(1,2,3) TO-251/TO-252/TO-220: 1.Gate 2.Drain 3.Source DFN5*6: 4.Gate 5,6,7,8.Drain 1,2,3.Source 1 2 3 Note: Rthja is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is d efined as the solder mounting surface of the drain pins. Rthjc is guaranteed by design while Rthca is determined by the user's board design. DFN5*6 Rthja : 47oC/W on a 1 in2 pad of 2oz copper.

Electrical characteristic ( TC = 25oC unless otherwise specified ) Symbol Parameter Test conditions Min. Typ. Max. Unit Off characteristics BVDSS Drain to source breakdown voltage VGS=0V, ID=250uA 100 V ΔBVDSS / ΔTJ Breakdown voltage temperature coefficient ID=250uA, referenced to 25oC 0.05 V/oC IDSS Drain to source leakage current VDS=100V, VGS=0V 1 uA VDS=80V, TC=125oC 50 uA IGSS Gate to source leakage current, forward VGS=20V, VDS=0V 100 nA Gate to source leakage current, reverse VGS=-20V, VDS=0V -100 nA On characteristics VGS(TH) Gate threshold voltage VDS=VGS, ID=250uA 1.4 2.4 V RDS(ON) Drain to source on state resistance VGS=10V, ID=35A 7.1 8.9 mΩ VGS=10V, ID=70A 7.2 9.0 mΩ VGS=4.5V, ID=35A 9.0 11 mΩ Gfs Forward transconductance VDS=8V, ID=35A 78 S Dynamic characteristics Ciss Input capacitance VGS=0V, VDS=25V, f=1MHz 4160 pF Coss Output capacitance 1590 Crss Reverse transfer capacitance 57 td(on) Turn on delay time VDS=50V, ID=30A, RG=25Ω, VGS=10V (note 4,5) ns tr Rising time 51 td(off) Turn off delay time 143 tf Fall time 92 Qg Total gate charge VDS=80V,VGS=10V,ID=30A, Ig=6.5mA (note 4,5) nC Qgs Gate-source charge 8.9 Qgd Gate-drain charge 9.1 Rg Gate resistance VDS=0V, Scan F mode 1.5 Ω Source to drain diode ratings characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit IS Continuous source current Integral reverse p-n Junction diode in the MOSFET 70 A ISM Pulsed source current 280 A VSD Diode forward voltage drop. IS=70A, VGS=0V 1.4 V trr Reverse recovery time IS=30A, VGS=0V, dIF/dt=100A/us 63 ns Qrr Reverse recovery charge 105 nC ※. Notes 1. Repeatitive rating : pulse width limited by junction temperature. 2. L =0.96mH, IAS =24A, VDD=50V, RG=25Ω, Starting TJ = 25oC 3. ISD ≤ 30A, di/dt = 100A/us, VDD ≤ BVDSS, Staring TJ =25oC 4. Pulse Test : Pulse Width ≤ 300us, duty cycle ≤ 2%. 5. Essentially independent of operating temperature.

Fig. 1. On-state characteristics Fig. 3. On-resistance variation vs. drain current and gate voltage Fig. 4. On-state current vs. diode forward voltage Fig 5. Breakdown voltage variation vs. junction temperature Fig. 6. On-resistance variation vs. junction temperature Fig. 2. Transfer characteristics

Fig. 9. Maximum safe operating area(DFN5*6) Fig. 8. Capacitance Characteristics Fig. 7. Gate charge characteristics Fig. 10. Maximum safe operating area(TO-251) Fig. 11. Maximum safe operating area(TO-252) Fig. 12. Maximum safe operating area(TO-220)

Fig. 15. Transient thermal response curve(TO-252) Fig. 13. Transient thermal response curve(DFN5*6) Fig. 14. Transient thermal response curve(TO-251)

10% VDS VIN 90% 10% td(on) tr tON td(off) tOFF tf Fig. 18. Switching time test circuit & waveform Fig. 17. Gate charge test circuit & waveform Fig. 16. Transient thermal response curve(TO-220)

  • All the data & curve in this document was tested in XI’AN SEMIPOWER TESTING & APPLICATION CENTE * This product has passed the PCT,TC,HTRB,HTGB,HAST,PC and Solderdunk reliability testing. * Qualification standards can also be found on the Web site (http://www.semipower.com.cn) * Suggestions for improvement are appreciated, Please send your suggestions to samwin@samwinsemi.com Fig. 20. Peak diode recovery dv/dt test circuit & waveform VDD Same type as DUT VDS L RG 10VGS IS VDS DUT *. dv/dt controlled by RG *. Is controlled by pulse period VGS (DRIVER) IS (DUT) VDS (DUT) Body diode forward voltage drop VF Diode recovery dv/dt IRM di/dt 10V Diode reverse current VDD Fig. 19. Unclamped Inductive switching test circuit & waveform