SVV SENSATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
www.sensata.com Copyright © 2023 Sensata Technologies Inc. |SVV / SVM SINE COSINE CONVERTER Electrical The SVV/SVM Sine-Cosine converters takes the quadrature, differential, output signals from a suitably matched DSG-EV/EM or DMG-EV/EM encoder and converts these signals to analogue Sine and Cosine levels. The SVV module provides 1V p-p and the SVM module provides 11uA p-p standards. Supply from Controller 5V ±-5% Encoder Input 9 pin D type conenctor (Newall pin-out specification) Output to Controller Differential analogue signals Module output Connector 9 way D type connector Typical current consumption (No encoder) 110mA (VCC = 5.0V) Typical current consumption: (With SpherosynTM/MicrosynTM Digital) 190mA Maximum input quadrature rates 12MHz SVV converter part number 600-83640 SVM converter part number 600-83650 SPECIFICATIONS Pin 1 Do not connect Pin 2 Channel A Pin 3 Channel /A Pin 4 Channel B Pin 5 Channel /B Pin 6 OV Pin 7 5V Pin 8 Channel RM Pin 9 Channel /RM CONNECTIONS ANALOGUE OUTPUT SIGNALS NOTE: Newall Measurement Systems Ltd. reserves the right to change the specification without notice. N SVV / SVM SINE COSINE CONVERTER DATASHEET INTRODUCTION The SVV/SVM Sine-Cosine converters takes the quadrature, differential, output signals from a suitably matched SHG-VV/VM or MHG- VV/VM encoder and converts these signals to analogue Sine and Cosine levels. The SVV module provides 1V p-p and the SVM module provides 11mA p-p standards. Both provide differential signals and a 'digital' reference marker signal as shown below. ANALOGUE OUTPUT SIGNALS 023-81040/0 ELECTRICAL REQUIREMENTS Supply from Controller: 5V ±-5% Encoder Input: 9 pin D type conenctor (Newall pin-out specification) Output to Controller: Differential analogue signals Module output Connector: 9 way D type connector Typical current consumption: 110mA (VCC = 5.0V) (No encoder) Typical current consumption: 190mA (With SpherosynTM/MicrosynTM Digital) Maximum input quadrature rates: 12MHz 0 5 10 15 20 25 30 35 40 Reference 306º total width 1Vpp or 11µA NB. 40-micron period also available with MHG-VV or MHG-VM Encoders Assumes 120Ω termination resistor The connector shell should be tied to the encoder screen. Reference 360º total width
Rev.11/6/2023 Page 2 sensata.com CONTACT US Copyright © 2023 Sensata Technologies, Inc. Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Americas Newall Electronics Inc.
1803 OBrien Rd
Columbus, OH 43228 Tel: +1 614 771 0213 sales@newall.com newall.com Rest of World: Newall Measurement Systems, Ltd. Business Park, Unit 1 Wharf Way Glen Parva, Leicester LE2 9UT United Kingdom Tel: +44 (0) 116 264 2730 sales@newall.co.uk newall.co.uk DIMENSIONS Ensure the unit is located clear of any coolants or sources of contamination. The unit should be firmly mounted using the mounting points and screws provided. NOTE: Newall Measurement Systems Ltd. reserves the right to change the specification without notice. N PIN CONNECTION
1 Do not connect
2 Channel A
3 Channel /A
4 Channel B
5 Channel /B
8 Channel RM
9 Channel /RM
The connector shell should be tied to the encoder screen. INSTALLATION Ensure the unit is located clear of any coolants or sources of contamination. The unit should be firmly mounted using the moun ting points and screws provided. SVV / SVC SINE COSINE CONVERTER DATASHEET