SVR1085-3.3Z

SVR1085-3.3M SSDI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

SOLID STATE DEVICES, INC. SVR1085-3.3M, Z, D2, & D3 thru SVR1085-12M, Z, D2, & D3

14830 Valley View Blvd * La Mirada, Ca 90638

Phone: (562) 404-7855 * Fax: (562) 404-1773 FEATURES:

• Eutectic Die Attach
• Superior to LM117 Types
• Complimentary Use with SVR1086 Types
• Fast Switching
• Isolated Hermetically Sealed Power Package
• 150 oC Operating Temperature
• Custom Lead Forming Available
• Ceramic Seal Package Available
• Class H or K (Space) Screening Available
• Radiation Tolerant Devices are Available Designer's Data Sheet NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. SVR0002ADATA SHEET #:

1.5 Amps

2.85 thru 12Volts LOW DROPOUT POSITIVE LINEAR VOLTAGE REGULATOR MAXIMUM RATINGS SYMBOL UNITS V ALUE

30 VV INInput Voltage 5/

Part Number /Ordering Information 1/ Screening 2/: _ = Not Screened H = High Rel Level K = Space Level R = Radiation Tolerant Lead Bend: 3/ _ = Straight DB = Down Bend UB = Up Bend Package: 4/ M = TO-254 Z = TO-254Z D2 = D2 Pack D3 = D3 Pack Voltage: _ = Variable V oltage 3.3 = 3.3V 3.6 = 3.6V 5 = 5V 12 = 12V TO-254 (M): TO-254 (Z): D 2 Pack (D2): D 3 Pack (D3): Power Dissipation oC-65 TO +150T STGStorage Temperature Control Section Power Transistor oC-55 TO +150 -55 TO +200T J Operating Junction Temperature VV IN(Op) “V IN/OUT Operating Input Voltage In-to-Out Differential SVR1085-3.3 & -3.6 SVR1085 -5 SVR1085-12 SVR1085-_

SOLID STATE DEVICES, INC. Phone: (562) 404-7855 * Fax: (562) 404-1773 SVR1085-3.3M, Z, D2, & D3 thru SVR1085-12M, Z, D2, & D3 Electrical Characteristics SYMBOL UNITS MAX Output Voltage 7/ Line Regulation (IOUT = 0A) Load Regulation 6/, 7/ Dropout Voltage 8/ (IOUT = IFULLOAD ) Current Limit Min. Load Current Quiescient Current 3.365 3.672 5.100 12.24 6.00 6.00 6.00 6.00 6.00 6.00 25.0 25.0 0.3 0.4 1.5 1.5 1.5 1.5 1.5 V V V V mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV V V V V V A A A A A A A mA mA mA mA V OUT “V OUT “V IN “V OUT “IOUT ILIMIT ILOAD IQ MIN 3.235 3.500 4.900 11.76 3.2 0.02 3.2 3.2 3.2 3.2 SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 SVR1085 -_ SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 SVR1085 -_ SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 SVR1085 -_ SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 SVR1085 -_ SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 TYP 3.300 3.600 5.000 12.00 0.5 1.0 0.5 1.0 0.5 1.0 1.0 2.0 0.1 0.2 1.3 1.3 1.3 1.3 1.3 4.0 0.05 4.0 4.0 4.0 4.0 (0 # I OUT # 5A, 4.5V # VIN # 15V) (0 # IOUT # 3A, 5V # VIN # 15V) (0 # IOUT # IFULLOAD , 6.5V # VIN # 20V) (0 # IOUT # IFULLOAD , (13.5V # VIN # 25V) (4.8V # VIN # 15V) (4.8V # VIN # 15V) (6.5V # VIN # 20V) (13.5V # VIN # 25V) (“V =3V , 10mA #IOUT #IFULLOAD ) (VIN = 5V , 0 # IOUT # 5A) (VIN = 5V , 0 # IOUT # 3A) (VIN = 5.25V , 0 # IOUT # IFULLOAD ) (VIN = 8V , 0 # IOUT # IFULLOAD ) (“V REF = 15V) (“V REF = 33mV) (“V REF = 36mV) (“V REF = 50mV) (“V REF = 120mV) (“V = 5V) (“V = 25V) (VIN = 8V) (VIN = 8V) (VIN = 10V) (VIN = 17V) “V = 25V (VIN = 18V) (VIN = 18V) (VIN = 20V) (VIN = 25V) to NOTE: * Full Temperature Range

SOLID STATE DEVICES, INC. SVR1085-3.3M, Z, D2, & D3 thru SVR1085-12M, Z, D2, & D3 Phone: (562) 404-7855 * Fax: (562) 404-1773 NOTES: * Full Temperature Range 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500. 3/ For Lead Bend Options Request Document # DSB-001 (Available for Download @ ssdi-power.com). 4/ For Package Outlines Request Document # DSA-001. (Available for Download @ ssdi-power.com) 5/ Devices are guaranteed to withstand transient Input V oltage up to 30V . For Input V oltages greater then the maximum operating Input V oltage some degradation of specifications will occur. For 5V and 12V devices operating at Input/Output differentials greater then 15V , a minimum external load of 5mA is required to maintain regulation. 6/ See Thermal Regulation specifications for changes in Output V oltage due to the heating effects. Line and Load Regulations are measured at a constant Junction Temperature by low duty cycle pulse testing. Load Regulation is measured at the Output Lead at approx. 1/8” from the package. 7/ Line and Load Regulation are guaranteed up to the maximum power dissipation of 30W. Power Dissipation is determined by the Input/Output differential and the Output Current. Guaranteed maximum power dissipation will not be available over the full Input/ Output range. 8/ Dropout V oltage is specified over the full Output Current range of the Device. 9/ Minimum Load Current is defined as the minimum current required to maintain regulation. At 25V Input/Output differential the device is guaranteed to regulate if the Output Current is greater than 10mA. Electrical Characteristics (Continue) SYMBOL UNITS MAX Thermal Regulation Ripple Rejection (f =120Hz, COUT =25:F, IOUT = IFULLOAD ) Adjust Pin Current Adjust Pin Current Change Temperature Stability Long Term Strability RMS Output Noice Thermal Resistance Junction to Case 0.02 120 5.0 1.0 0.9 3.0 %/W dB dB dB dB dB oC/W oC/W IADJ “IADJ “V OUT “V OUT “Vtime en R 2JC MIN SVR1085 -_ SVR1085 -3.3 SVR1085 -3.6 SVR1085 -5 SVR1085 -12 SVR1085 -_ SVR1085 -_ Control Circuitry Power Transistor TYP 0.004 0.2 0.5 0.3 0.003 (30 msec Pulse) (“V=3V , C ADJ =25:F) (VIN =6.3V , IOUT =3A) (VIN =6.6V , IOUT =3A) (VIN = 8V) (VIN = 15V) 10mA #IOUT #IFULLOAD, 1.5V # “V # 25V (10Hz # f # 10kHz) 125 to PIN ASSIGNMENT PIN 2 PIN 3 Output PIN 1FUNCTION InputAdjustV oltage Regulator

SOLID STATE DEVICES, INC. Phone: (562) 404-7855 * Fax: (562) 404-1773 SVR1085-3.3M, Z, D2, & D3 thru SVR1085-12M, Z, D2, & D3 TO-254 (M): TO-254 (Z): D 2 Pack (D2): D 3 Pack (D3):