SVAC3-IP-E120 ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.Applied-Motion.com SVAC3-IP-E120 Q Programmable Servo Drive w/ EtherNet/IP 1pc. - 710.00 50pc. - 532.50 Product Features Programmable digital servo drive in a compact package DSP-based current control Operates from 120 VAC Provides motor current up to 3.5 A rms continuous,

7.5 A rms peak

Fast 10/100 Ethernet for programming and communications EtherNet/IP communication protocol for network communications with PLCs and other devices Supports all SVAC3-S and SVAC3-Q control modes UDP & TCP support 12 digital inputs, 6 digital outputs, all optically isolated 1 analog input, +/-10 volt range Jerk filter for S-curve acceleration ramps Applied Motion Products, Inc. 404 Westridge Dr. Watsonville, CA 95076, USA 1-800-525-1609 Tel (831) 761-6555 Fax (831) 761- 6544

The SVAC3-IP-E120 is a compact and cost-effective servo drive that is compatible with a variety of servo motors and a great choice for many OEM applications. Its all-digital design and DSP-based current control allow for smooth motion and a quick response from the specially matched set of Applied Motion motors available with it. Power to the drive comes from single-phase 120 VAC and the drive can output up to 3.5 A rms continuous, 7.5 A rms peak to the servo motor. The drive also has built-in protection features like over-voltage, over-temperature, and over-current, which prevent damage to the drive while running in adverse conditions. The SVAC3-IP-E120 incorporates EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The SVAC3-IP drives run all of the same control modes as Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. For connecting to external devices such as limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 12 digital inputs, 6 digital outputs, and 1 analog input. In addition to EtherNet/IP the drive supports Ethernet TCP and UDP protocols for sending commands from Applied Motion’s proprietary Serial Command Language (SCL). The same 10/100 Mbit Ethernet port on the drive is also used for tuning, configuring and programming the drive using the Quick Tuner™ and Q Programmer™ software applications. This servo motor drive is UL Recognized (File No. E332730), CE approved, and RoHS compliant.

Description

Model Number: SVAC3-IP-E120 Part Number: 5000-222 Supply Voltage: 108-132 VAC Supply Voltage Type: AC Control Modes: Streaming Commands Q Programming EtherNet/IP Output Current, Continuous: 3.5 Output Current, Peak: 7.5 Communication Ports: Ethernet EtherNet/IP Feedback: Halls + Incremental encoder Setup Method: Software setup Digital Inputs: Digital Outputs: Analog Inputs: 1 single-ended Dimensions: 5.5 x 4.5 x 2.0 inches Weight: 22.4 oz Operating Temperature Range: 0 to 70 °C Ambient Temperature Range: 0 to 55 °C Ambient Humidity: 90% max, non-condensing Status LEDs: 1 red, 1 green Circuit Protection: Short circuit Over-voltage Under-voltage Over-temp Specifications

Part No. 5000-222 1pc. $710.00 25pc. $610.60 50pc. $532.50 100pc. Request a Quote for 100+ piece pricing. Pricing Software: ARM Firmware Downloader DSP Firmware Downloader Q Programmer™ Quick Tuner™ SCL Utility Sample Code: C_sharp_UDP_example.zip VB6_UDP_example.zip VB6_TCP_example.zip Manuals: SVAC3_Hardware_Manual_920-0028.pdf SVAC3_QuickSetupGuide_920-0052.pdf Host Command Reference Rev I.pdf Datasheet: http://s3.amazonaws.com/applied-motion-pdf/SVAC3-IP-E120.pdf Family Datasheet: Servo-Products-Datasheet-925-0008.pdf EtherNet-IP-White-Paper_920-0050.pdf EIP_EDS_FILES.zip 2D Drawing: SVAC3.pdf 3D Drawing: SVAC3.igs Speed-Torque Curves: SVAC3_speed-torque.pdf Agency Approvals: STAC5_SVAC3_CE_DOC.PDF Application Notes: APPN0024_AOIs-for-RSLogix5000.zip APPN0023_MicroLogix-to-EtherNet-IP-drive.zip APPN0022_CompactLogix-to-EtherNet-IP-drive.zip APPN0016_Simple-25-pin-mating-connections.pdf Software Downloads