SV2-MOVIE ELMA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 33
Technical content
Rev. 2 CompactPCI ® Serial Carrier for MXM 3.1 Type A/B Graphics Module
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SV2-MOVIE (8HP Assembly) General The SV2-MOVIE is a peripheral slot board for PICMG® CompactPCI® Serial systems and acts as carrier for an MXM 3.0/3.1 graphics module. The SV2-MOVIE is provided with four DisplayPort front panel connectors and can accommodate either a type A (82x70mm 2) or type B (82x105mm2) MXM graphics module. MXM (Mobile PCI Express Module) is an interconnect standard for GPUs created by MXM-SIG. MXM cards are mostly equipped with an AMD or Nvidia GPU core. With respect to a reasonable thermal management, a low power GPU is recommended for industrial applications together with the SV2-MOVIE. © E K F - 2 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SV2-MOVIE w. Nvidia GTX 970 MXM Theory of Operation For best performance, the SV2-MOVIE should be operated in a CompactPCI® Serial fat pipe slot, which provides a PCI Express® x8 host interface. The SV2-MOVIE is equipped with a PCIe Gen3 redriver for optimum signal integrity. For use with suitable MXM graphics modules, low profile passive heat spreaders are available, for either 4HP or 8HP front panel width. In addition, the CompactPCI® Serial rack must provide suitable forced airflow (e.g. by fans). © E K F - 3 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Feature Summary General < PICMG® CompactPCI® Serial (CPCI-S.0) fat pipe slot card < Single size Eurocard 3U 4HP/8HP 100x160mm2 < CompactPCI® Serial backplane connectors P1/P2, for PCIe x8 fat pipe slot < Four DisplayPort front panel receptacles MXM Host I/F < Carrier board for type A or type B MXM 3.0/3.1 graphics module < Maximum module dimensions 105mm x 82mm x 7mm (type B) < Maximum module dimensions 113mm x 82mm x 7mm (w/o front panel connectors) < MXM 3.0 edge card connector 314/281 pins < PCI Express® Gen3 (8GT/s) redriver on-board, PCIe x8 < Custom cooler plate design (4HP/8HP envelope) < CUDA (Compute Unified Device Architecture) capable with NVIDIA MXM GPU < Option +12V external power connector 4.20mm for MXM modules >60W < Option +12V power connector 3.5mm Eurostyle for attachment of a 12V DC fan < Heat spreader available for CoolConduct® technology heat exchanger systems (option) Sample MXM Modules < Aetina M3N1060-MN (NVIDIA GTX 1060 Pascal) < Aetina M3N1070-MN (NVIDIA GTX 1070 Pascal, for CUDA operation only, no front I/O DisplayPort connectors available due to extended module dimensions) < NVIDIA® QUADRO® P3000 (1280 CUDA cores, 3.9TFLOPS) < NVIDIA® QUADRO® P5000 (2048 CUDA cores, 6.4TFLOPS) For drivers and other software please refer to the MXM module manufacturers website, e.g. Aetina, AMD, Nvidia © E K F - 4 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Regulatory < Designed & manufactured in Germany < ISO 9001 certified quality management < Long term availability < Rugged solution (coating/sealing available on request) < RoHS compliant < Commercial and industrial temperature range (depends on MXM module loaded and thermal solution) < Humidity 5% ... 95% RH non condensing < Altitude -300m ... +3000m < Shock 15g 0.33ms, 6g 6ms < Vibration 1g 5-2000Hz < MTBF 45.1 years < EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) © E K F - 5 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Block Diagram Front Panel I/O Simplified Block Diagram SV2-MOVIE MXM Graphics Module Carrier Backplane CompactPCI Serial PCIe DisplayPort 1.2/1.3 PCIe 3.0 Redriver Fat Pipe Slot MXM 3.0 Socket MXM 3.0 GPU Module Type B PCIe © E K F - 6 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module DP PG1 +12V Power Eurostyle 3.5mm 12V Power 4.20mm MiniFit Jr. PV-1 DP DP DP SV2-MOVIE Rev. 2 MXM 3.0 Type B Module Carrier ©• EKF ekf.com SV2-MOVIE CompactPCI Serial EKF ekf.com•® • © • MXM 3.0 Type B MXM 3.0 Type A P3Option +12V SV2-MOVIE Rev. 2 MXM 3.0 Type B Module Carrier ©• EKF ekf.com DSW1 ON 1 2 Component Assembly © E K F - 7 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module © E K F - 8 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Front Panel 4HP SV2-MOVIE MXM GPU DP © • •EKF draft - do not scale ekf.com DP DP DP © E K F - 9 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module © EKF • ekf.com Please note: The front handle is provided with a built-in microswitch, which is used to disable the on-board power circuit when released. Vice versa, the on-board devices are enabled not before the handle gets locked. Please refer to the illustration below an d make sure that the eject lever has reached its final position for proper board operation, as shown in picture 8. A gentle click should be audible, when the red actuator pin moves into its raised position, indicating that the board is locked and ready for use. 1 - 4: remove board 5 - 8: install board 1 & 8: on-board power enabled 2-7: on-board power disabled © E K F - 1 0 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module © E K F - 1 1 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Cable Adapter DP to VGA Cable Adapter DP to DVI DisplayPort Connectors The SV2-MOVIE supports up to four independent disp lays, attached to the front panel display connectors 1-4. DisplayPort serves as the state of the a rt interface for computer monitors, replacing legacy VGA and DVI video connectors since integrated in all main-stream GPUs and chipsets. The latest specification DisplayPort 1.2 adds multi-stream transport (MST), allowing up to 63 separate A/V streams across a single DisplayPort connection. Please refer to the MXM Graphics Module actually in use on the SV2-MOVIE for the number of DP video outputs available, resolution and other parameters. For attachment of either a classic style analog RGB monitor or DVI type display to any DP front panel receptacle, there are both adapters and also adapter cables available, from DisplayPort to the VGA or DVI connector. © E K F - 1 2 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module DP • DisplayPort Video Standard DisplayPort Receptacle, 20-lead (270.60.20.0) 20 Power +3.3V 0.5A 19 Return
18 Hot Plug Detect 17 AUX(N)
16 GND 15 AUX(P)
14 CONFIG2 13 CONFIG1
12 LANE3(N) 11 GND
10 LANE3(P) 9 LANE2(N)
8 GND 7 LANE2(P)
6 LANE1(N) 5 GND
4 LANE1(P) 3 LANE0(N)
2 GND 1 LANE0(P)
Specified by the VESA DisplayPort connector standard is a dedicated power pin 20 (+3.3V 0.5A). Both the GPU (source side) and a DP monitor (sink side) must provide power via this pin. A VESA specified DisplayPort cable however must not connect the pins 20 of both cable ends, in order to avoid a back driving conflict. Unfortunately there are cable assemblies available with pin 20 passed through, with unpredictable results on the system behaviour. Before ordering DP cable assemblies, verify the associated wiring diagram. Sample VESA Compliant DisplayPort Cable Assemblies Manhattan 307116, 391931 Molex 68783-0007 TE (Tyco) 2040687-2, 2040638-2 EKF Part # 270.60.20.0 • © EKF © E K F - 1 3 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module MXM Module Connector The SV2-MOVIE is provided with a ri ght angled edge card connector for MXM 3.0/3.1 graphics modules. If the SV2-MOVIE has been installed into a fat pipe peripheral slot of the CompactPCI® Serial backplane, a PCI Express® x 8 link is available at the MXM connector. The SV2-MOVIE is equipped with PCIe Gen3 redrivers (8GT/s) for high performance MXM graphics cards. The SV2-MOVIE is equipped with 4 DisplayPort front pa nel connectors 1-4, which are related to the MXM module DP outputs A, B, C, and D. Please note, that there are MXM modules available with propriatary (deviant with respect to the MXM specification) output mapping - please refer to the particular MXM module datasheet for details. +3.3V is sourced from an on-board regulator. The current should not exceed 3A. +5V is sourced from an on-board regulator. The current should not exceed 3A. +12V is the main power rail, passed through from the CompacPCI® Serial backplane connector P1. If the current across the 12V rail is expected to exceed significantly >5A (>60W MXM module power consumption), the optional 4.20mm +12V power connector should be employed in addition (in parallel to the backplane slot P1/J1 12V power pins). All power r ails will be disabled if the front panel handle built-in microswitch has been activated. External Documents MXM Graphics Module Mobile PCI Express Module Electromechanical Specification Version 3.1 Rev. 1.0 March 1, 2012 www.mxm-sig.org Nvidia MXM Graphics Modules MXM 3.0 Type B Module GTX 970M, GTX 980M, GTX 1060 www.aetina.com.tw © E K F - 1 4 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module MXM 3.0 Connector Part #255.8.1.314.10 E1 PWR (+12V) PWR (+12V) E2 E3 GND GND E4 1 +5V PRSNT_R# 2 3 +5V WAKE# 4 5 +5V PWR_GOOD 6 7 +5V PWR_EN 8 9 +5V 27MHz 10
11 GND GND 12
13 GND LVDS_U_HPD 14
15 GND JTAG_TESTEN 16
17 GND PWR_LEVEL 18
19 PEX_STD_SW# see DSW1 TH_OVERT# 20
21 VGA_DISABLE# see DSW1 TH_ALERT# 22
23 PNL_PWR_EN TH_PWM 24
25 PNL_BL_EN GPIO0 26
27 PNL_BL_PWM GPIO1 28
29 HDMI_CEC GPIO2 30
31 LVDS_L_HPD SMB_DAT 32
33 LVDS_DDC_DAT SMB_CLK 34
35 LVDS_DDC_CLK GND 36
37 GND OEM0 38
39 OEM1 OEM2 40
41 OEM3 OEM4 42
43 OEM5 OEM6 44
45 OEM7 GND 46
47 GND PEX_TX15# 48
49 PEX_RX15# PEX_TX15 50
51 PEX_RX15 GND 52
53 GND PEX_TX14# 54
55 PEX_RX14# PEX_TX14 56
57 PEX_RX14 GND 58
59 GND PEX_TX14# 60
61 PEX_RX13# PEX_TX14 62
63 PEX_RX13 GND 64
65 GND PEX_TX14# 66
67 PEX_RX12# PEX_TX14 68
69 PEX_RX12 GND 70
to be continued on next page © E K F - 1 5 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module MXM 3.0 Connector Part #255.8.1.314.10
71 GND PEX_TX11# 72
73 PEX_RX11# PEX_TX11 74
75 PEX_RX11 GND 76
77 GND PEX_TX10# 78
79 PEX_RX10# PEX_TX10 80
81 PEX_RX10 GND 82
83 GND PEX_TX9# 84
85 PEX_RX9# PEX_TX9 86
87 PEX_RX9 GND 88
89 GND PEX_TX8# 90
91 PEX_RX8# PEX_TX8 92
93 PEX_RX8 GND 94
95 GND PEX_TX7# 96
97 PEX_RX7# PEX_TX7 98
99 PEX_RX7 GND 100
101 GND PEX_TX6# 102
103 PEX_RX6# PEX_TX6 104
105 PEX_RX6 GND 106
107 GND PEX_TX5# 108
109 PEX_RX5# PEX_TX5 110
111 PEX_RX5 GND 112
113 GND PEX_TX4# 114
115 PEX_RX4# PEX_TX4 116
117 PEX_RX4 GND 118
119 GND PEX_TX3# 120
121 PEX_RX3# PEX_TX3 122
123 PEX_RX3 GND 124
125 GND
133 GND GND 134
135 PEX_RX2# PEX_TX2# 136
137 PEX_RX2 PEX_TX2 138
139 GND GND 140
141 PEX_RX1# PEX_TX1# 142
143 PEX_RX1 PEX_TX1 144
to be continued on next page © E K F - 1 6 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module MXM 3.0 Connector Part #255.8.1.314.10
145 GND GND 146
147 PEX_RX0# PEX_TX0# 148
149 PEX_RX0 PEX_TX0 150
151 GND GND 152
153 PEX_REFCLK# PEX_CLK_REQ# 154
155 PEX_REFCLK PEX_RST# 156
157 GND VGA_DDC_DAT 158
159 JTAG_TDO VGA_DDC_CLK 160
161 JTAG_TDI VGA_VSYNC 162
163 JTAG_TCLK VGA_HSYNC 164
165 JTAG_TMS GND 166
167 JTAG_TRST# VGA_RED 168
169 LVDS_UCLK# VGA_GREEN 170
171 LVDS_UCLK VGA_BLUE 172
173 GND GND 174
175 LVDS_UTX3# LVDS_LCLK# 176
177 LVDS_UTX3 LVDS_LCLK 178
179 GND GND 180
181 LVDS_UTX2# LVDS_LTX3# 182
183 LVDS_UTX2 LVDS_LTX3 184
185 GND GND 186
187 LVDS_UTX1# LVDS_LTX2# 188
189 LVDS_UTX1 LVDS_LTX2 190
191 GND GND 192
193 LVDS_UTX0# LVDS_LTX1# 194
195 LVDS_UTX0 LVDS_LTX1 196
197 GND GND 198
199 DP_C_L0# LVDS_LTX0# 200
201 DP_C_L0 LVDS_LTX0 202
203 GND GND 204
207 DP_C_L1 DP_D_L0 208
209 GND GND 210
213 DP_C_L2 DP_D_L1 214
to be continued on next page © E K F - 1 7 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module MXM 3.0 Connector Part #255.8.1.314.10
215 GND GND 216
219 DP_C_L3 DP_D_L2 220
221 GND GND 222
225 DP_C_AUX DP_D_L3 226
227 RSVD GND 228
229 RSVD DP_D_AUX# 230
231 RSVD DP_D_AUX 232
233 RSVD DP_C_HPD 234
235 RSVD DP_D_HPD 236
237 RSVD RSVD 238
239 RSVD RSVD / +3.3V 240 241 RSVD RSVD / +3.3V 242
243 RSVD GND 244
245 RSVD DP_B_L0# 246
247 RSVD DP_B_L0 248
249 RSVD GND 250
251 GND DP_B_L1# 252
255 DP_A_L0 GND 256
257 GND DP_B_L2# 258
261 DP_A_L1 GND 262
263 GND DP_B_L3# 264
267 DP_A_L2 GND 268
269 GND DP_B_AUX# 270
271 DP_A_L3# DP_B_AUX 272
273 DP_A_L3 DP_B_HPD 274
275 GND DP_A_HPD 276
277 DP_A_AUX# +3.3V 278 279 DP_A_AUX +3.3V 280
281 PRSNT_L#
© E K F - 1 8 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module ON 1 2 160.15.02.0 © EKF • ekf.com DSW1 Part #245.35.02.01 1 = OFF PEX_STD_SW# MXM Pin 19 I2C GPIO P4 By default this switch is set to OFF, to select PCI Express low swing level. 1 = ON If the switch is set to ON, PCI Express full swing level will be selected. 2 = OFF VGA_DISABLE# MXM Pin 21 I2C GPIO P3 If this switch is set to OFF the MXM graphics module is the primary boot display device. 2 = ON If this switch is set to ON, the VGA functionality of the MXM module will be disabled to prevent it from being used as a boot display device. This feature is optional and maybe not supported by the MXM module. By default this switch is set to ON since the CPU is the primary boot display device. Please note, that both signals can be controlled optionally via an on-board I2C PCA9554A GPIO. In order to avoid a short circuit condition, both switches must be set to off (open) if the GPIO ports are intended to be used as controlling outputs. © E K F - 1 9 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module 1 2 264.02.104.00 4.20mm Dual Row 2x2 © EKF • ekf.com Option 4.20mm Power Connector +12V The SV2-MOVIE carrier card derives +12V power via the P1 backplane connector. For an MXM module with a power consumption >60W, usage of an additional power connector in parallel is highly recommended. The SV2-MOVIE is equipped with a 2x2 pin 4.2mm pitch dual row wire to board vertical header, for attachment of a suitable cable assembly between power supply and the SV2. 4.20mm Connector 2x2 Dual Row Part #264.02.104.00 GND 1 2 GND +12V 3 4 +12V Each connector pin is rated at 8A. Mating cable connectors are available e.g. from Molex, under the Mini-Fit® Jr.™ brand. A suitable housing would be e.g. the Molex part #0039013042, to be used with crimp terminals e.g. Molex part #0039000060 (18-24 AWG). Other manufacturers for 4.20mm style connectors are e.g. Würth and TE. © E K F - 2 0 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SV2-MOVIE (8HP Assembly) The SV2-Movie is available as 4HP or 8HP (or custom size) front panel width assembly, depending on the heat spreader required for the particular application. The 8HP version would allow for a straight Mini-Fit ® power connector (see picture below). © E K F - 2 1 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module 245.35.02.01 3.50mm Terminal Block © EKF • ekf.com 2 1 Option 3.50mm Power Connector +12V Another power connector may be provided on the SV2-MOVIE as an option, for attachment of a 12V DC compact fan mounted above the MXM cooling plate (typically 8HP SV2-MOVIE front panel width assembly). Terminal Block 3.50mm (Eurostyle™) Part #245.35.02.01 GND 2 1 +12V The 3.50mm pitch vertical header mates with a suitable plug e.g. Molex part #0395073002. Other Eurostyle compatible terminal block suppliers are e.g. Phoenix Contact, Weidmüller, Würth, TE, or FCI. As an alternate, the pig tail wires of the cooling fan can be soldered directly to the SV2-MOVIE PCB, using the 3.50mm connector terminal pads. Since both connectors, the 4.20mm WtB and the 3.50mm terminal block are wired in paralle l on-board to +12V (in addition to the power pins of the backplane connector P1), the terminal block can also be used for external power supply up to 8A, as an alternate. © E K F - 2 2 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module P1/P2 CompactPCI® Serial Backplane Connectors P2 CompactPCI® Serial Peripheral Slot Backplane Connector P2 A B C D E F G H I J K L
8 GND GND GND GND
7 GND GND GND GND
6 GND GND GND GND
5 GND GND GND GND
4 GND GND GND GND
3 GND GND GND GND
2 GND PE
P1 CompactPCI® Serial Peripheral Slot Backplane Connector P1 A B C D E F G H I J K L
6 GND PE
4 GND USB2+ USB2- GND PE
2 GND I2C
SDA GND RSV RSV GND RST# WAKE# GND PE EN# SYS EN# 1 +12V STBY GND +12V +12V GND +12V +12V GND +12V +12V GND pin positions printed gray: not connected © E K F - 2 3 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module P3 CompactPCI ® Serial Backplane Connector (+12V Enforced) P3 CompactPCI ® Serial Peripheral Slot Backplane Connector (Option) P3 A B C D E F G H I J K L 7 +12V GND +12V +12V GND +12V +12V GND +12V +12V GND 5 +12V GND +12V +12V GND +12V +12V GND +12V +12V GND 3 +12V GND +12V +12V GND +12V +12V GND +12V +12V GND
2 GND GND GND GND
1 +12V GND +12V +12V GND +12V +12V GND +12V +12V GND From Rev. 2 PCB off, additional +12V power can be supplied via P3 by means of a custom specific backplane. Please note, that the SV2-MOVIE must not be inserted into a backplane slot which is wired for propriatary rear I/O on these pins, due to backdriving +12V power from P1 to P3. © E K F - 2 4 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Nvidia MXM Module CUDA (Compute Unified Device Architecture) The SV2-MOVIE is suitable for modest parallel computing when equipped with a CUDA capable graphics module (NVIDIA). For details please refer to www.nvidia.com/object/cuda_home_new.html. SV2-MOVIE Links SV2-MOVIE Home www.ekf.com/s/sv2/sv2.html CompactPCI® Serial Overview www.ekf.com/s/smart_solution.pdf
Ordering Information
For popular SV2-MOVIE SKUs please refer to www.ekf.com/liste/liste_21.html#SV2 © E K F - 2 5 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module CoolConduct® Heat Spreader CoolConduct® Skids CoolConduct® System CoolConduct ® Heat Exchange Technology (Option) © E K F - 2 6 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SV2-MOVIE w/o DP Connectors for Extended Size MXM Module GTX1070 Extended Size Module (Aetina) for CUDA Operation Proprietary Size MXM Module Option © E K F - 2 7 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module CUDA (w/o Front I/O) CUDA (w/o Front I/O) © E K F - 2 8 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Option SVP-POWER Connector +12V The CompactPCI® Serial specification defines five pins of the backplane connector P1 as +12V power source, for a maximum of 60W availab le for a 3U card slot. This may be not sufficient for some GPU modules, however. In order to enhance the maximum power, a small connector PCB can be optinally useful, available as an assembly with the SV2-MOVIE. When the SV2-MOVIE is provided with an 8HP heatsink, the SVP-1-POWER can be assembled as a mezzanine module, populated with an additional backplane connector P1, and a 12V MiniFit Jr. cable harness to the carrier board. This solution would double the maximum power consumption to 120W, delivered via the backplane. © E K F - 2 9 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SVP-1-POWER © E K F - 3 0 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SVP-2-POWER (w/o Panel) • SVP-3-POWER (w. Rear Panel) As an alternate, the SVP-POWER can be used as rear I/O module for the SV2-MOVIE, using the rJ3 backplane connector for additional +12V support. Th is requires a backplane slot configured for RIO (J3 backplane connector). The additional current is derived from an AMP MATE-N-LOK series connector, rated at 12A. A suitable power cable harness to the power supply is required in addition. The SVP-POWER rear I/O solution can be used along with both 4HP and 8HP versions of the SV2-MOVIE. © E K F - 3 1 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module SVP-2-POWER • 12V Support RIO Modules © E K F - 3 2 - e k f . c o m
SV2-MOVIE • CompactPCI® Serial • Carrier for MXM 3.1 Type A/B Graphics Module Beyond All Limits: EKF High Performance Embedded Industrial Computers Made in Germany boards. systems. solutions. Document No. 7922 • 17 June 2020 EKF Elektronik GmbH Philipp-Reis-Str. 4 (Haus 1) Lilienthalstr. 2 (Haus 2)
59065 HAMM
Phone +49 (0)2381/6890-0 Fax +49 (0)2381/6890-90 Internet www.ekf.com E-Mail sales@ekf.com