STP12NK60Z_09 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Revision history

Features

■ Extremely high dv/dt capability ■ 100% avalanche tested ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Very good manufacturing repeatability Application ■ Switching applications

Description

The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, specialties is taken to ensure a very good dv/dt capability for the most demanding application. Such series complements ST full range of high voltage Power MOSFETs. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area

Table 3. Thermal data Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On/off Table 6. Dynamic

  1. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
  2. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

Table 8. Gate-source Zener diode

  1. The built-in back-to-back Zener diodes have specif ically been designed to enhance not only the device’s

usage of external components.

2.1 Electrical characteristi cs (curves)

Figure 2. Safe operating area for TO-220 Figure 3. Thermal impedance for TO-220 Figure 4. Safe operating area for TO-247 Figure 5. Thermal impedance for TO-247 Figure 6. Safe operating area for TO-220FP Figure 7. Thermal impedance for TO-220FP

3 Test circuits

Figure 19. Switching times test circuit for Figure 20. Gate charge test circuit Figure 21. Test circuit for inductive load Figure 22. Unclamped inductive load test Figure 23. Unclamped inductive waveform Figure 24. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

TO-220 type A mechanical data Dim mm Min Typ Max A 4.40 4.60 b 0.61 0. 88 b1 1.14 1.70 c0 . 4 8 0.70 D 15.25 15.75 D1 1.27 E1 0 1 0 . 4 0 e 2.40 2.70 e1 4. 95 5.15 F1 . 2 3 1.32 H1 6.20 6.60 J1 2.40 2.72 L1 3 14 L1 3.50 3.93 L20 16.40 L302 8.90 ∅P 3.75 3.85 Q 2.65 2. 95 0015988_Rev_S

Dim. mm .xaM.pyT.niM 6.44.4A 7.25.2B 57.25.2D 7.054.0E 157.0F 07.151.11F 5.151.12F 2.559.4G 7.24.21G 4.0101H 612L 6.036.823L 6.018.94L 6.39.25L 4.619.516L 3.997L 2.33aiD 7012510_Rev_J A B H Dia D E L6 L5 F1 F2 F G TO-220FP mechanical data

Dim. mm. Min. Typ. Max. A4 . 855 . 1 5 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c0 . 4 0 0 . 80 D1 9.85 20.15 E 15.45 15.75 e5 . 4 5 L 14.20 14. 80 L1 3.70 4. 30 L2 1 8.50 øP 3.55 3.65 øR 4.50 5.50 S 5.50 TO-247 mechanical data

5 Revision history

Table 9. Document revision history