STS 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Wire Marker Type-On Sheets Product Information Application: A fost, convenient type-on or write-on wire marker for marking 0.D. .090* - .315* (2,29 mm - 8,00 mm) (typical wire gouges) Bt) thru e6 AWG 0.5mm" = 10,0mm¢) wire and cable, while providing a self-lominating, protective shield over the legend. Tape Technical Data: (Typical Values) Material: Transparent vinyl film tope with acrylic pressure sensitive adhesive. Application Temperature Range: 20°F to 120°F (-7°C to 49°C) Operating Temperature Range: ~40°F to 185°F (-40°C to 85°C) Marker Strip Dimension: .75 X 1.4 Inches (19,0 mm X 35,0 mm) Write-On Surface Dimension: -75 X .31 Inches (19,0 mm X 8,0 mm) No. of Markers per Sheet: 55 No. of Markers per Package: 275 8.75 Tape Thickness (D: 4.0 mils (0,10 mm) 8.25 Tape and Liner Thickness (D: 9.0 mils (0,23 mm) . Adhesion to Steal (D: 40 02./In. Width 75 23°C (73°F) | | MARKING Adhesion to Backing (D: 25 02./In. Width 7 \\ ~ 23°C (73°F) Dielectric Strength (D: 4000 Volts fot ys ye LS Tensile Strength (D: 2500 PSI Minimum (7, V7, V/, Y V W/, V/, V castes a lA | / Y) ) Permanence and Legibility (2): Pass J (ASTM GS-53-77) oe ee eee oe eee Tested to the Requirements of: a ee ee LH UL-969 Rated Surface Temperature: 100 degrees C. Vf Y V/, V W V (7, V Tested using One Inch wide Tape: /) VAs YA, /) VA w Per ASTM D°1000 Pressure Sensitive Adhesive Coated VLL) NV / VMLNVLNVLL ‘apes Used for Electric plications. —— = m a ee (2) Per UL-5IO Paragraphs 4.1-4.4 ond UL-969. 7 7 (7 Y H\\ 47 V7, (7 Y +55 MARKERS PER SHEET 7 oo ee +5 SHEETS PER PACKAGE a a +20 PACKAGES PER CARTON Y 7 V/, V/ YY, (V/, V V PHMONE. SHIPPER BOX VA VAs i) 4 Y) )) VAs (CARTON) 5,500 MARKERS CMLL LLY) MAL LV LLV LL Mot'l: STS 4 mil Vinyl silty Ty rd rr Color: White/Transparent V/V/V //V V7 /V//V//V eet Width: 8.75° Labels per Row: Il VA /) A. A /) lA lA ZL Rows per Sheet: 5 - Vertical Spacing: 6 Lines/Inch ENGINEERING SPECIFICATION: A Type-on or Write-on Wire Marker in sheet form. Each marker shall have a marking area of .75* x .3I* and be sufficient for ob .090" thru .315° (2,29 mm - 8,00 mm) (typical wire fouges) 022 thru ¢6 AWS (0,5mm? - 10,0mm?) wire and cable, while providing a self-laminating, protective shield over the legend. Each sheet shall contain 55 markers, and have o perforated backing which con be bent to loosen markers for easy removal. Important Notlos: All statements, technical information and recommendations contained herein are bosed on tests we believe to be reliable, but the accuracy or completeness thereof is not guoranteed, ond the following is made in lieu of all warranties, ex- press or implied: Seller's and manufacturer's only ebligation sholl be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or inability to use the Pigduet. Before using, user shall determine the suitability of the product for his intended use, and user assumes ail risks ond licbility whatsoever in connection therewith. Statements or recommendations not contained herein shall hove no force or effect unless in an agreement signed by officers of seller and manufacturer. 1/86 ELECTRICAL PRODUCTS DIVISION/3M 3M AUSTIN CENTER - 145-4N-02 AUSTIN, TX 78769-2963 (512) 984-5555