STPR1620

STPR1620CG STMICROELECTRONICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

STPR1620CT July 1999- Ed:2B ULTRA-FAST RECOVERY RECTIFIER DIODES D 2PAK STPR1620CG SUITED FOR SMPS LOW LOSSES LOW FORWARD AND REVERSE RECOVERY TIME HIGH SURGE CURRENT CAPABILITY

FEATURES

Low cost dual center tap rectifier suited for Switched Mode Power Supplies and high frequency DC to DC converters. Packaged in D2PAK or TO-220AB, this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications.

DESCRIPTION

Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 200 V IF(RMS) RMS forward current 20 A IF(AV) Average forward current δ = 0.5 Tc=120°C Per diode Per device A IFSM Surge non repetitive forward currenttp=10ms sinusoidal 80 A Tstg Storage temperature range - 65 to + 150 °C Tj Maximum operating junction temperature 150 °C ABSOLUTE RATINGS (limiting values, per diode) K K A2 K IF(AV) 2x8A VRRM 200 V Tj (max) 150 °C VF (max) 0.99 V trr (max) 30 ns MAIN PRODUCTS CHARACTERISTICS TO-220AB STPR1620CT KA1

Symbol Test conditions Min. Typ. Max. Unit IR * Tj=2 5°CV R =V RRM 50 µA Tj= 100°C 0.2 0.6 mA VF* * Tj= 125°CI F =8A 0.8 0.99 V Tj= 125°CI F = 16 A 0.95 1.20 Tj=2 5°CI F = 16 A 1.25 Pulse test : * tp = 5 ms,δ <2% ** tp = 380µs,δ <2% To evaluate the conductionlosses use the following equation: P = 0.78 x IF(AV) + 0.026 x IF2(RMS) STATIC ELECTRICAL CHARACTERISTICS Symbol Test conditions Min. Typ. Max. Unit trr T j=2 5°CI F = 0.5A IR =1 A Irr = 0.25A 30 ns tfr T j=2 5°CI F =3 A VFR = 1.1 x VF max dIF/dt = 50 A/µs 20 ns VFP Tj=2 5°CI F =3 A d I F/dt = 50 A/µs3V RECOVERY CHARACTERISTICS Symbol Parameter Value Unit R th (j-c) Junction to case Per diode 3.0 °C/W Total 1.8 °C/W R th (c) Coupling 0.6 °C/W When the diodes 1 and 2 are used simultaneously : Δ Tj(diode 1) = P(diode 1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) THERMAL RESISTANCES STPR1620CG / STPS1620CT

Fig. 2:Peak currentversus form factor(per diode). Fig. 3: Average current versus ambient temperature (δ : 0.5, per diode). Fig. 4:Non repetitive surge peak forward current versus overload duration (maximum values, per diode). Fig. 1:Average forward power dissipation versus average forward current (per diode). Fig. 5:Relative variation of thermal transient impedance junction to case versus pulse duration (per diode). Fig. 6:Forward voltage drop versus forward current (maximum values, per diode). STPR1620CG / STRP1620CT

H Fig. 7: Junction capacitance versus reverse voltage applied (typical values, per diode). Fig. 8:Recoverycharges versus dIF/dt (per diode). Fig. 10:Dynamic parameters versus junction temperature(per diode). Fig. 9:Peak reverse current versus dIF/dt (per diode). STPR1620CG / STPS1620CT

D 2PAK (Plastic) A D R M C G L B E * FLA T ZONE NO LESSTHAN 2mm REF. DIMENSIONS Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.40 3.20 0.094 0.126 R 0.40 typ. 0.016 typ. V2 0 ° 8° 0° 8° 8.90 3.70 1.30 5.08 16.90 10.30 FOOT PRINT (in millimeters) STPR1620CG / STRP1620CT

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap- proval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics  1999 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com PACKAGE MECHANICAL DATA TO-220AB (JEDEC outline) A C D Dia F G E M REF. DIMENSIONS Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 F2 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 G1 2.40 2.70 0.094 0.106 H2 10 10.40 0.393 0.409 L2 16.4 typ. 0.645 typ. L4 13 14 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M 2.6 typ. 0.102 typ. Ordering type Marking Package Weight Base qty Delivery mode STPR1620CT STPR1620CT TO-220AB 2.23g 50 Tube STPR1620CG STPR1620CG D 2PAK 1.48g 50 Tube STPR1620CG-TR STPR1620CG D 2PAK 1.48g 1000 Tape & reel Cooling method : by conduction(C) Recommended torque value : 0.55N.m. Maximum torque value : 0.7N.m. Epoxy meets UL94,V0 STPR1620CG / STPS1620CT