N-channel 800 V, 0.73 typ., 7 A MDmesh™ K5 Power MOSFETs in TO-220 and TO-247 packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 16
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 TO-220 type A package information
- 4.2 TO-247 package information
- 5 Revision history
Features
Order code VDS RDS(on) max. ID STP9N80K5 800 V 0.90 Ω 7 A STW9N80K5 Industry’s lowest RDS(on) x area Industry’s best FoM (figure of merit) Ultra-low gate charge 100% avalanche tested Zener-protected
Applications
Switching applications
Description
These very high voltage N-channel Power MOSFET are designed using MDmesh™ K5 technology based on an innovative proprietary vertical structure. The result is a dramatic reduction in on-resistance and ultra-low gate charge for applications requiring superior power density and high efficiency. Table 1: Device summary Order code Marking Package Packing STP9N80K5 9N80K5 TO-220 Tube STW9N80K5 TO-247 TO-247 TAB TO-220
1 Electrical ratings
Table 2: Absolute maximum ratings Symbol Parameter Value Unit VGS Gate-source voltage ± 30 V ID Drain current (continuous) at TC= 25 °C 7 A ID Drain current (continuous) at TC = 100 °C 4.4 A ID(1) Drain current (pulsed) 28 A PTOT Total dissipation at TC = 25 °C 110 W dv/dt (2) Peak diode recovery voltage slope 4.5 V/ns dv/dt (3) MOSFET dv/dt ruggedness 50 TJ Operating unction temperature range - 55 to 150 °C Tstg Storage temperature range Notes: (1)Pulse width limited by safe operating area. (2)ISD ≤ 7 A, di/dt≤ 100 A/μs; VDS peak < V(BR)DSS,VDD= 640 V (3)VDS ≤ 640 V Table 3: Thermal data Symbol Parameter Value Unit TO-220 TO-247 Rthj-case Thermal resistance junction-case 1.14 °C/W Rthj-amb Thermal resistance junction-ambient 62.5 50 °C/W Table 4: Avalanche characteristics Symbol Parameter Value Unit IAR Avalanche current, repetitive or not repetitive (pulse width limited by Tjmax) 2.4 A EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 200 mJ
2 Electrical characteristics
TC = 25 °C unless otherwise specified Table 5: On/off-state Symbol Parameter Test conditions Min. Typ. Max. Unit V(BR)DSS Drain-source breakdown voltage VGS = 0 V, ID = 1 mA 800 V IDSS Zero gate voltage drain current VGS = 0 V, VDS = 800 V 1 µA VGS = 0 V, VDS = 800 V TC = 125 °C(1) 50 µA IGSS Gate body leakage current VDS = 0 V, VGS = ±20 V ±10 µA VGS(th) Gate threshold voltage VDS = VGS, ID = 100 µA 3 4 5 V RDS(on) Static drain-source on-resistance VGS = 10 V, ID = 3.5 A 0.73 0.90 Ω Notes: (1)Defined by design, not subject to production test. Table 6: Dynamic Symbol Parameter Test conditions Min. Typ. Max. Unit Ciss Input capacitance VDS = 100 V, f = 1 MHz, VGS = 0 V - 340 - pF Coss Output capacitance - 37 - pF Crss Reverse transfer capacitance - 0.65 - pF Co(tr)(1) Equivalent capacitance time related VGS = 0 V, VDS = 0 to 640 V - 61 - pF Co(er)(2) Equivalent capacitance energy related pF Rg Intrinsic gate resistance f = 1 MHz open drain - 7 - Ω Qg Total gate charge VDD = 640 V, ID = 7 A VGS= 10 V See (Figure 16: "Test circuit for gate charge behavior") - 12 - nC Qgs Gate-source charge - 3.8 - nC Qgd Gate-drain charge - 6.7 - nC Notes: (1)Co(tr) is a constant capacitance value that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS. (2)Co(er) is a constant capacitance value that gives the same stored energy as Coss while VDS is rising from 0 to 80% VDSS. Table 7: Switching times Symbol Parameter Test conditions Min. Typ. Max. Unit td(on) Turn-on delay time VDD= 400 V, ID =3.5 A, RG = 4.7 Ω VGS = 10 V See (Figure 15: "Test circuit for resistive load switching times" and Figure 20: "Switching time waveform") - 11 - ns tr Rise time - 5.7 - ns td(off) Turn-off delay time - 65.3 - ns tf Fall time - 13.6 - ns
Table 8: Source-drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit ISD Source-drain current - 7 A ISDM(1) Source-drain current (pulsed) - 28 A VSD(2) Forward on voltage ISD = 7 A, VGS = 0 V - 1.5 V trr Reverse recovery time ISD = 7 A, di/dt = 100 A/µs, VDD = 60 V See Figure 17: "Test circuit for inductive load switching and diode recovery times" - 292 ns Qrr Reverse recovery charge - 2.66 µC IRRM Reverse recovery current - 18.2 A trr Reverse recovery time ISD = 7 A, di/dt = 100 A/µs VDD = 60 V, Tj = 150 °C See Figure 17: "Test circuit for inductive load switching and diode recovery times" - 477 ns Qrr Reverse recovery charge - 3.91 µC IRRM Reverse recovery current - 16.4 A Notes: (1)Pulse width limited by safe operating area (2)Pulsed: pulse duration = 300 µs, duty cycle 1.5% Table 9: Gate-source Zener diode Symbol Parameter Test conditions Min. Typ. Max. Unit V(BR)GSO Gate-source breakdown voltage IGS= ± 1mA,ID= 0 A 30 - - V The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry.
2.1 Electrical characteristics (curves)
Figure 2: Safe operating area Figure 3: Thermal impedance Figure 4: Output characteristics Figure 5: Transfer characteristics Figure 6: Gate charge vs gate-source voltage Figure 7: Static drain-source on-resistance
Figure 14: Maximum avalanche energy vs starting TJ
STP9N80K5, STW9N80K5 Test circuits
3 Test circuits
Figure 15: Test circuit for resistive load switching times Figure 16: Test circuit for gate charge behavior Figure 17: Test circuit for inductive load switching and diode recovery times Figure 18: Unclamped inductive load test circuit Figure 19: Unclamped inductive waveform Figure 20: Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
4.1 TO-220 type A package information
Figure 21: TO-220 type A package outline
Table 10: TO-220 type A mechanical data Dim. mm Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95
4.2 TO-247 package information
Figure 22: TO-247 package outline
Table 11: TO-247 package mechanical data Dim. mm Min. Typ. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.30 5.45 5.60 L 14.20 14.80 L1 3.70 4.30 18.50 ØP 3.55 3.65 ØR 4.50 5.50 S 5.30 5.50 5.70
5 Revision history
Table 12: Document revision history Date Revision Changes 13-Oct-2015 1 First release. 20-May-2016 2 Modified: Table 4: "Avalanche characteristics", Table 6: "Dynamic", Table 7: "Switching times" and Table 8: "Source-drain diode". Minor text changes 26-Jul-2016 3 Updated features in cover page.