Datasheet - STD9N60M2, STP9N60M2, STU9N60M2 - N-channel 600 V, 0.72 Ω typ., 5.5 A, MDmesh™ M2 Power MOSFETs in DPAK, TO-220 and IPAK packages

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 27

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 DPAK (TO-252) type A package information
  • 4.2 DPAK (TO-252) type C package information
  • 4.3 DPAK (TO-252) type E package information
  • 4.4 DPAK (TO-252) packing information
  • 4.5 TO-220 type A package information
  • 4.6 IPAK (TO-251) type A package information
  • 4.7 IPAK (TO-251) type C package information
  • 5 Ordering information

Features

Order codes VDS @ TJmax RDS(on) max. ID PTOT Package STD9N60M2 650 V 0.78 Ω 5.5 A 60 W DPAK STP9N60M2 TO-220 STU9N60M2 IPAK

  • Extremely low gate charge
  • Excellent output capacitance (C OSS) profile
  • 100% avalanche tested
  • Zener-protected

Applications

  • Switching applications

Description

These devices are N-channel Power MOSFETs developed using the MDmesh™ M2 technology. Thanks to their strip layout and improved vertical structure, these devices exhibit low on-resistance and optimized switching characteristics, rendering them suitable for the most demanding high-efficiency converters. Product status link STD9N60M2 STP9N60M2 STU9N60M2 N-channel 600 V, 0.72 Ω typ., 5.5 A, MDmesh™ M2 Power MOSFETs in DPAK, TO-220 and IPAK packages STD9N60M2, STP9N60M2, STU9N60M2 Datasheet DS9553 - Rev 3 - December 2018 For further information contact your local STMicroelectronics sales office.

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 2. Thermal data

  1. When mounted on 1 inch² FR-4, 2 Oz copper board

Table 3. Avalanche characteristics

2 Electrical characteristics

(Tcase = 25 °C unless otherwise specified) Table 4. On /off states

  1. Defined by design, not subject to production test.

Table 5. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0

Table 6. Switching times Figure 20. Switching time waveform)

Electrical characteristics

Table 7. Source-drain diode Figure 17. Test circuit for inductive

  1. Pulse width is limited by safe operating area.
  2. Pulse test: pulse duration = 300 µs, duty cycle 1.5%.

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area for DPAK and IPAK Figure 2. Thermal impedance for DPAK and IPAK Figure 3. Safe operating area for TO-220 Figure 4. Thermal impedance for TO-220 Figure 5. Output characteristics Figure 6. Transfer characteristics

3 Test circuits

Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior Figure 17. Test circuit for inductive load switching and Figure 18. Unclamped inductive load test circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform

4 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STD9N60M2, STP9N60M2, STU9N60M2

Package information

4.1 DPAK (TO-252) type A package information

Figure 21. DPAK (TO-252) type A package outline

Table 8. DPAK (TO-252) type A mechanical data

4.2 DPAK (TO-252) type C package information

Figure 22. DPAK (TO-252) type C package outline

Table 9. DPAK (TO-252) type C mechanical data

4.3 DPAK (TO-252) type E package information

Figure 23. DPAK (TO-252) type E package outline

Table 10. DPAK (TO-252) type E mechanical data Figure 24. DPAK (TO-252) recommended footprint (dimensions are in mm)

4.4 DPAK (TO-252) packing information

Figure 25. DPAK (TO-252) tape outline

Figure 26. DPAK (TO-252) reel outline Table 11. DPAK (TO-252) tape and reel mechanical data

4.5 TO-220 type A package information

Figure 27. TO-220 type A package outline

Table 12. TO-220 type A package mechanical data

4.6 IPAK (TO-251) type A package information

Figure 28. IPAK (TO-251) type A package outline

Table 13. IPAK (TO-251) type A package mechanical data

4.7 IPAK (TO-251) type C package information

Figure 29. IPAK (TO-251) type C package outline

Table 14. IPAK (TO-251) type C package mechanical data

5 Ordering information

Table 15. Order codes

Ordering information

Revision history

Table 16. Document revision history 19-Mar-2013 1 First release. – The part number STF9N60M2 has been moved to a separate datasheet. Updated features and description on cover page. Modified Table 2. Thermal data.