N-channel 40 V, 5.0 m, 80 A, DPAK, TO-220, IPAK, I²PAK STripFET™ III Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 16

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ Standard threshold drive ■ 100% avalanche tested Application ■ Switching applications

Description

This STripFET™ III Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance providing superior switching performances. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Current limited by package
  2. Pulse width limited by safe operating area
  3. I SD ≤ 80 A, di/dt ≤ 400A/µs, VDS ≤ V(BR)DSS, Tj ≤ Tjmax

Table 3. Thermal resistance

  1. When mounted on 1inch² FR-4 2Oz Cu board

2 Electrical characteristics

Table 4. Static Table 5. Dynamic

  1. Pulsed: pulse duration = 300µs, duty cycle 1.5%

Table 6. Switching on/off (inductive load) Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical character istics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Static drain-source on resistance Figure 7. Normalized BVDSS vs temperature

6.5 ID=40A

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

A 4.40 4.60 0.17 3 0.181 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c0 . 4 8 0.70 0.01 9 0.027 D 15.25 15.75 0.6 0.62 D1 1.27 0.050 E 10 10.40 0. 393 0.409 e 2.40 2.70 0.0 94 0.106 e1 4. 95 5.15 0.1 94 0.202 F1 . 2 3 1.32 0.04 8 0.051 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.0 94 0.107 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L302 8.90 1.1 37 ∅P 3.75 3.85 0.147 0.151 Q2 . 6 5 2 . 95 0.104 0.116

DIM. mm. min. typ max. A 2.20 2.40 A1 0. 901 . 1 0 b 0.64 0. 90 b2 0.95 b4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 D 6.00 6.20 E 6.40 6.60 e2 . 2 8 e1 4.40 4.60 H 16.10 L 9.00 9.40 (L1) 0. 801 . 2 0 L2 0. 80 V1 10 o TO-251 (IPAK) mechanical data 0068771_H

DIM. mm. min. typ max. A 2.20 2.40 A1 0. 901 . 1 0 A2 0.0 3 0.23 b 0.64 0. 90 b4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 D 6.00 6.20 D1 5.10 E 6.40 6.60 E1 4.70 e2 . 2 8 e1 4.40 4.60 H 9.35 10.10 L1 2. 80 L2 0. 80 L4 0.60 1 R0 . 2 0 V2 0 o 8 o TO-252 (DPAK) mechanical data 0068772_G

I²PAK (TO-262) mechanical data Dim mm inch Min Typ Max Min Typ Max A 4.40 4.60 0.17 3 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.2 3 1.320 . 0 4 8 0.052 D 8.95 9. 350 . 352 0. 368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0. 393 0.410 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055

Packaging mechanical data STD90N4F3, STI90N4F3, STP90N4F3, STU90N4F3 14/16 Doc ID 14212 Rev 3

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0.795 G 16.4 18.4 0.645 0.724 N 50 1.968 T 22.4 0.881 BASE QTY BULK QTY 2500 2500 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 12.1 0.476 D 1.5 1.6 0.059 0.063 D1 1.5 0.059 E 1.65 1.85 0.065 0.073 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 P0 3.9 4.1 0.153 0.161 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 1.574 W 15.7 16.3 0.618 0.641 TAPE MECHANICAL DATA All dimensions are in millimeters

6 Revision history

Table 8. Document revision history