N-channel 55 V, 0.0060 , 80 A, TO-220, D²PAK STripFET™ II Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 14

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ Low threshold drive Application ■ Switching applications

Description

This Power MOSFET is the latest development of STMicroelectronis unique "single feature size" strip-based process. The resulting transistorshows extremely high packing density for low on-resistance, rugged avalanche characteristics andless critical alignment steps therefore a remarkable manufacturing reproducibility. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Current limited by package
  2. Pulse width limited by safe operating area
  3. I SD ≤ 80 A, di/dt ≤ 300 A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 2Oz Cu board

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characterist ics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Transconductance Figure 7. Static drain-source on resistance

3 Test circuits

Figure 14. Switching times test circuit for Figure 15. Gate charge test circuit Figure 16. Test circuit for inductive load Figure 17. Unclamped inductive load test Figure 18. Unclamped inductive waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

A 4.40 4.60 0.17 3 0.181 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c0 . 4 8 0.70 0.019 0.027 D 15.25 15.75 0.6 0.62 D1 1.27 0.050 E 10 10.40 0. 393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F1 . 2 3 1.32 0.04 8 0.051 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L302 8.90 1.1 37 ∅P 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116

D2PAK (TO-263) mechanical data Dim hcnimm Min Typ Max Min Typ Max 181.0371.006.404.4A 900.0100.032.030.01A 730.0720.039.007.0b 760.0540.007.141.12b 420.0710.006.054.0c 350.0840.063.132.12c 863.0253.053.959.8D 592.005.71D 904.0493.004.0101E 433.005.81E 1.045.2e 802.0291.082.588.41e 426.0095.058.5151H 601.0990.096.294.21J 011.0090.097.292.2L 550.050.004.172.11L 960.0150.057.103.12L 610.04.0R °8°0°8°02V 0079457_M

Packaging mechanical data STB85NF55L, STP85NF55L 12/14 Doc ID 8544 Rev 8

5 Packaging mechanical data

DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA

6 Revision history

Table 8. Document revision history