N-channel 68 V, 0.0082 , 98 A, TO-220 STripFET™ II Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 13

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Revision history

Features

■ Exceptional dv/dt capability ■ 100% avalanche tested Application ■ Switching applications

Description

The STP80NF70 is a N-channel Power MOSFET realized with STMicroelectronics unique STripFET™ process. It has specifically been designed to minimize input capacitance and gate charge. The device is therefore suitable in advanced high-efficiency switching applications. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 3. Thermal data

  1. 1.6 mm from case for 10 sec.

2 Electrical characteristics

(TCASE=25°C unless otherwise specified). Table 4. On/off states Table 5. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%.

Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics

5 VGS(V)

Figure 6. Normalized BV DSS vs temperature Figure 7. Static drain-source on resistance Figure 8. Gate charge vs gate-source voltage Figure 9. Capacitance variations Figure 10. Normalized gate threshold voltage Figure 11. Normalized on resistance vs

0 ID(A)

0 Qg(nC)

12 VDD=34V

0 Qg(nC)100

Figure 12. Source-drain diode forward

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test Figure 17. Unclamped inductive waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

TO-220 type A mechanical data Dim mm Min Typ Max A 4.40 4.60 b 0.61 0. 88 b1 1.14 1.70 c0 . 4 8 0.70 D 15.25 15.75 D1 1.27 E1 0 1 0 . 4 0 e 2.40 2.70 e1 4. 95 5.15 F1 . 2 3 1.32 H1 6.20 6.60 J1 2.40 2.72 L1 3 14 L1 3.50 3.93 L20 16.40 L302 8.90 ∅P 3.75 3.85 Q 2.65 2. 95 0015988_Rev_S

5 Revision history

Table 8. Document revision history 11-Jun-2010 1 First release.