STB80NF55-08AG STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 18

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 D 2PAK package information
  • 4.2 TO-220 type A package information
  • 5 Packing information
  • 6 Revision history

Features

  • Designed for automotive applications and AEC-Q101 qualified
  • 100% avalanche tested
  • Low input capacitance and gate charge
  • Low gate input resistance

Applications

  • Switching applications

Description

These Power MOSFETs have been developed using STMicroelectronics’ unique STripFET process, which is specifically designed to minimize input capacitance and gate charge. This renders the devices suitable for use as primary switch in advanced high-efficiency isolated DC- DC converters for telecom and computer applications, and applications with low gate charge driving requirements. D2PAK TO-220 1 2 TAB 1 3 TAB $0Y 7$% Order code V DSS RDS(on) max I D STB80NF55-08AG

55 V 8 m Ω 80 A

Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Pulse width limited by safe operating area

Table 3. Thermal data

  1. When mounted on 1 inch 2 FR-4 board, 2 oz Cu

Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On/off states

  1. Defined by design, not subject to production test

Table 6. Dynamic

  1. Pulsed: pulse duration=300 μs, duty cycle 1.5%

Table 7. Switching times

Table 8. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Normalized V(BR)DSS vs temperature Figure 7. Static drain-source on resistance

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package information

specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

4.1 D 2PAK package information

Figure 19. D²PAK (TO-263) type A package outline

Table 9. D²PAK (TO-263) type A package mechanical data

Figure 20. D²PAK footprint(a)

4.2 TO-220 type A package information

Figure 21. TO-220 type A package outline

Table 10. TO-220 type A mechanical data

5 Packing information

Figure 22. Tape

Figure 23. Reel Table 11. D²PAK (TO-263) tape and reel mechanical data

6 Revision history

Figure 24. Document revision history

STB80NF55-08AG, STP80NF55-08AG