N-channel 100 V, 0.008 typ., 80 A STripFET™ VII DeepGATE™ Power MOSFETs in DPAK, TO-220FP, H2PAK-2 and TO-220

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 25

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

  • Extremely low gate charge
  • Ultra low on-resistance
  • Low gate input resistance

Applications

  • Switching applications

Description

These devices utilize the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. TO-220 DPAK H PAK-22 TAB TAB TAB 1 2 TO-220FP $0Y 7$% 7$% +3$. '3$.72DQG 72)3 QR7$% Order codes VDS @ TJmax RDS(on) max ID PTOT STD80N10F7 100 V 0.01 Ω 70 A 85 W STF80N10F7 0.01 Ω 40 A 30 W STH80N10F7-2 0.0095 Ω

80 A 110 W

STP80N10F7 0.01 Ω Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 3. Thermal data

2 Electrical characteristics

Table 4. On /off states Table 5. Dynamic Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for DPAK, Figure 3. Thermal impedance for DPAK, Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Output characteristics Figure 7. Transfer characteristics

4 VGS(V)8

Figure 12. Capacitance variations Figure 13. Normalized gate threshold voltage vs Figure 14. Normalized on-resistance vs Figure 15. Source-drain diode forward Figure 16. Normalized VDS vs temperature

2 VGS=10V

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

Figure 23. TO-220FP drawing

Table 8. TO-220FP mechanical data

Figure 24. DPAK (TO-252) type A drawing

Table 9. DPAK (TO-252) type A mechanical data

Figure 25. DPAK (TO-252) type A footprint (a)

Figure 26. H²PAK-2 drawing

Table 10. H²PAK-2 mechanical data

Figure 27. H²PAK-2 recommended footprint (dimensions are in mm)

Figure 28. TO-220 type A drawing

Table 11. TO-220 type A mechanical data

5 Packaging mechanical data

Figure 29. Tape for DPAK (TO-252)

Figure 30. Reel for DPAK (TO-252) Table 12. DPAK (TO-252) tape and reel mechanical data

Table 13. H²PAK-2 tape and reel mechanical data

6 Revision history

Table 14. Document revision history 07-Feb-2014 1 First release.