STP7NK80Z_10 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ Extremely high dv/dt capability ■ 100% avalanche tested ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Very good manufacturing repeatability

Applications

■ Switching application

Description

The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage Power MOSFETs including revolutionary MDmesh™ products. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area

Table 3. Thermal data Table 4. Avalanche characteristics

2 Electrical characteristics

Table 5. On/off states Table 6. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%
  2. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

increases from 0 to 80% VDSS.

integrity. These integrated Zener diodes thus avoid the usage of external components. Table 7. Source drain diode

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%
  2. Pulse width limited by safe operating area

Table 8. Gate-source zener diode

2.1 Electrical characteri stics (curves)

Figure 2. Safe operating area for TO-220, Figure 3. Thermal impedance for TO-220, Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Output characteristics Figure 7. Transfer characteristics

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 23. TO-220FP drawing Table 9. TO-220FP mechanical data

TO-220 type A mechanical data Dim mm Min Typ Max A 4.40 4.60 b 0.61 0. 88 b1 1.14 1.70 c0 . 4 8 0.70 D 15.25 15.75 D1 1.27 E1 0 1 0 . 4 0 e 2.40 2.70 e1 4. 95 5.15 F1 . 2 3 1.32 H1 6.20 6.60 J1 2.40 2.72 L1 3 14 L1 3.50 3.93 L20 16.40 L302 8.90 ∅P 3.75 3.85 Q 2.65 2. 95 0015988_Rev_S

I²PAK (TO-262) mechanical data Dim mm inch Min Typ Max Min Typ Max A 4.40 4.60 0.17 3 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.2 3 1.320 . 0 4 8 0.052 D 8.95 9. 350 . 352 0. 368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0. 393 0.410 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055

D2PAK (TO-263) mechanical data Dim hcnimm Min Typ Max Min Typ Max 181.0371.006.404.4A 900.0100.032.030.01A 730.0720.039.007.0b 760.0540.007.141.12b 420.0710.006.054.0c 350.0840.063.132.12c 863.0253.053.959.8D 592.005.71D 904.0493.004.0101E 433.005.81E 1.045.2e 802.0291.082.588.41e 426.0095.058.5151H 601.0990.096.294.21J 011.0090.097.292.2L 550.050.004.172.11L 960.0150.057.103.12L 610.04.0R °8°0°8°02V 0079457_M

STB7NK80Z, STB7NK80Z-1, STP7NK80ZFP, STP7NK80Z Packaging mechanical data Doc ID 8979 Rev 6 15/17

5 Packaging mechanical data

  • on sales type DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA

6 Revision history

Table 10. Revision history