Datasheet - STD7N60M2, STP7N60M2, STU7N60M2 - N-channel 600 V, 0.86 Ω typ., 5 A, MDmesh™ M2 Power MOSFETs in DPAK, TO-220 and IPAK packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 26
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 DPAK (TO-252) type A package information
- 4.2 DPAK (TO-252) type C package information
- 4.3 DPAK (TO-252) type E package information
- 4.4 DPAK (TO-252) packing information
- 4.5 TO-220 type A package information
- 4.6 IPAK (TO-251) type A package information
- 4.7 IPAK (TO-251) type C package information
Features
Order codes VDS @ TJmax RDS(on) max. ID STD7N60M2 650 V 0.95 Ω 5 ASTP7N60M2 STU7N60M2
- Extremely low gate charge
- Excellent output capacitance (C OSS) profile
- 100% avalanche tested
- Zener-protected
Applications
- Switching applications
Description
These devices are N-channel Power MOSFETs developed using MDmesh™ M2 technology. Thanks to their strip layout and improved vertical structure, these devices exhibit low on-resistance and optimized switching characteristics, rendering them suitable for the most demanding high efficiency converters. Product status link STD7N60M2 STP7N60M2 STU7N60M2 Product summary Order code STD7N60M2 Marking 7N60M2 Package DPAK Packing Tape and reel Order code STP7N60M2 Marking 7N60M2 Package TO-220 Packing Tube Order code STU7N60M2 Marking 7N60M2 Package IPAK Packing Tube N-channel 600 V, 0.86 Ω typ., 5 A, MDmesh™ M2 Power MOSFETs in DPAK, TO-220 and IPAK packages STD7N60M2, STP7N60M2, STU7N60M2 Datasheet DS9653 - Rev 2 - July 2018 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Limited by maximum junction temperature.
- Pulse width limited by safe operating area.
Table 2. Thermal data
- When mounted on 1 inch² FR-4, 2 Oz copper board
Table 3. Avalanche characteristics
2 Electrical characteristics
(Tcase = 25 °C unless otherwise specified) Table 4. Static
- Defined by design, not subject to production test.
Table 5. Dynamic
- C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
Table 6. Switching times Figure 21. Switching time waveform)
Electrical characteristics
Table 7. Source-drain diode
- Test circuit for inductive load
- Pulse width is limited by safe operating area.
- Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for DPAK and IPAK Figure 3. Thermal impedance for DPAK and IPAK Figure 4. Safe operating area for TO-220 Figure 5. Thermal impedance for TO-220 Figure 6. Output characteristics Figure 7. Transfer characteristics
3 Test circuits
Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior Figure 18. Test circuit for inductive load switching and Figure 19. Unclamped inductive load test circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STD7N60M2, STP7N60M2, STU7N60M2
Package information
4.1 DPAK (TO-252) type A package information
Figure 22. DPAK (TO-252) type A package outline
Table 8. DPAK (TO-252) type A mechanical data
4.2 DPAK (TO-252) type C package information
Figure 23. DPAK (TO-252) type C package outline
Table 9. DPAK (TO-252) type C mechanical data
4.3 DPAK (TO-252) type E package information
Figure 24. DPAK (TO-252) type E package outline
Table 10. DPAK (TO-252) type E mechanical data Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.4 DPAK (TO-252) packing information
Figure 26. DPAK (TO-252) tape outline
Figure 27. DPAK (TO-252) reel outline Table 11. DPAK (TO-252) tape and reel mechanical data
4.5 TO-220 type A package information
Figure 28. TO-220 type A package outline
Table 12. TO-220 type A package mechanical data
4.6 IPAK (TO-251) type A package information
Figure 29. IPAK (TO-251) type A package outline
Table 13. IPAK (TO-251) type A package mechanical data
4.7 IPAK (TO-251) type C package information
Figure 30. IPAK (TO-251) type C package outline
Table 14. IPAK (TO-251) type C package mechanical data
Revision history
Table 15. Document revision history 06-Jun-2013 1 First release. (TO-252) type E package information.