N-channel 30 V, 0.0042 , 75 A, DPAK, TO-220, IPAK, Short IPAK STripFET™ VI DeepGATE™ Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 21

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ RDS(on) * Qg industry benchmark ■ Extremely low on-resistance RDS(on) ■ High avalanche ruggedness ■ Low gate drive power losses Application Switching applications

Description

This N-Channel Power MOSFET product utilizes the 6th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure.The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. The value is rated according to Rthj-case
  2. Pulse width limited by safe operating area

Table 3. Thermal data

  1. When mounted on FR-4 board of 1in², 2oz Cu. t < 10 sec

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

Table 6. Switching times Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characterist ics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Normalized BV DSS vs temperature Figure 7. Static drain-source on resistance

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test Figure 17. Unclamped inductive wavefor m Figure 18. Switching time waveform

Figure 19. Gate charge waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 20. Short IPAK mechanical drawing Table 8. Short IPAK mechanical dimensions

Figure 21. DPAK footprint (a) Table 9. DPAK (TO-252) mechanical data

Figure 22. DPAK (TO-252) drawing

Table 10. IPAK (TO-251) mechanical data

Figure 23. IPAK (TO-251) drawing

Table 11. TO-220 type A mechanical data

Figure 24. TO-220 type A drawing

5 Packaging mechanical data

Table 12. DPAK (TO-252) tape and reel mechanical data

6 Revision history

Table 13. Document revision history – Added device in Short IPAK. – Added max values in Table 5: Dynamic. – Added new package and mechanical data.