Datasheet - STF6N60M2, STP6N60M2 - N‑channel 600 V, 1.06 Ω typ., 4.5 A MDmesh M2 Power MOSFET in a TO-220FP and TO-220 packages

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 15

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 TO-220FP type B package information
  • 4.2 TO-220 type A package information

Features

Order code VDS RDS(on) max. ID STF6N60M2 600 V 1.2 Ω 4.5 A STP6N60M2

  • Extremely low gate charge
  • Excellent output capacitance (Coss) profile
  • 100% avalanche tested
  • Zener-protected

Applications

  • Switching applications

Description

These devices are N-channel Power MOSFETs developed using the MDmesh M2 technology. Thanks to their strip layout and improved vertical structure, these devices exhibit low on-resistance and optimized switching characteristics, rendering them suitable for the most demanding high-efficiency converters. 1 2 TO-220FP TO-220 TAB D(2, TAB) G(1) S(3) AM01476v1_tab Product status links STF6N60M2 STP6N60M2 Product summary Order code STF6N60M2 Marking 6N60M2 Package TO-220FP Packing Tube Order code STP6N60M2 Marking 6N60M2 Package TO-220 Packing Tube N‑channel 600 V, 1.06 Ω typ., 4.5 A MDmesh M2 Power MOSFET in a TO-220FP and TO-220 packages STF6N60M2, STP6N60M2 Datasheet DS9734 - Rev 3 - December 2025 For further information, contact your local STMicroelectronics sales office.

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 2. Thermal data Table 3. Avalanche characteristics

2 Electrical characteristics

(TC = 25 °C unless otherwise specified) Table 4. On/off states

  1. Specified by design, not tested in production.

Table 5. Dynamic

  1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0

Table 6. Switching times Figure 19. Switching time waveform)

Electrical characteristics

Table 7. Source-drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area for TO-220FP Figure 2. Normalized transient thermal impedance Figure 3. Safe operating area for TO-220 Figure 4. Normalized transient thermal impedance Figure 5. Typical output characteristics Figure 6. Typical transfer characteristics

Figure 7. Typical gate charge characteristics Figure 8. Typical capacitance characteristics Figure 9. Typical drain-source on-resistance Figure 10. Normalized breakdown voltage vs temperature

1.11 I =1 mAD

Figure 11. Normalized gate threshold vs temperature Figure 12. Normalized on-resistance vs temperature

Figure 13. Typical reverse diode forward characteristics

3 Test circuits

Figure 14. Test circuit for resistive load switching times Figure 15. Test circuit for gate charge behavior Figure 16. Test circuit for inductive load switching and Figure 17. Unclamped inductive load test circuit Figure 18. Unclamped inductive waveform Figure 19. Switching time waveform

4 Package information

To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product status are available at: www.st.com. ECOPACK is an ST trademark.

4.1 TO-220FP type B package information

Figure 20. TO-220FP type B package outline

Package information

Table 8. TO-220FP type B package mechanical data

4.2 TO-220 type A package information

Figure 21. TO-220 type A package outline

Table 9. TO-220 type A package mechanical data

Revision history

Table 10. Document revision history 11-Jun-2013 1 First release. Updated title, features and description. Updated Table 2.: Absolute maximum ratings and Table 8.: Source drain diode. Updated 4.3: IPAK(TO-251) package information. Removed order code STU6N60M2. Updated Section 4: Package information.

IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. In the event of any conflict between the provisions of this document and the provisions of any contractual arrangement in force between the purchasers and ST, the provisions of such contractual arrangement shall prevail. The purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. The purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of the purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. If the purchasers identify an ST product that meets their functional and performance requirements but that is not designated for the purchasers' market segment, the purchasers shall contact ST for more information. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2025 STMicroelectronics – All rights reserved STF6N60M2, STP6N60M2 DS9734 - Rev 3 page 15/15