N-channel 60V 0.014 - 60A TO-220 STripFET II™ Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 12

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

N-channel 60V - 0.014Ω - 60A TO-220 STripFET II™ Power MOSFET General features ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Application oriented characterization

Description

This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced high- efficiency isolated DC-DC converters for Telecom and Computer application. It is also intended for any application with low gate charge drive requirements.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STP60NF06 60V <0.016 Ω 60A TO-220 Order code Part number Marking Package Packaging STP60NF06 P60NF06 TO-220 Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area

Table 2. Thermal data Table 3. Avalanche characteristics

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Source-drain diode forward Figure 6. Static drain-source on resistance

3 Test circuit

Figure 11. Switching times test circuit for Figure 12. Gate charge test circuit Figure 13. Test circuit for inductive load Figure 14. Unclamped Inductive load test Figure 15. Unclamped inductive waveform Figure 16. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

A 4.40 4.60 0.17 3 0.181 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c0 . 4 9 0.70 0.01 9 0.027 D 15.25 15.75 0.6 0.62 D1 1.27 0.050 E 10 10.40 0. 393 0.409 e 2.40 2.70 0.0 94 0.106 e1 4. 95 5.15 0.1 94 0.202 F1 . 2 3 1.32 0.04 8 0.051 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.0 94 0.107 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L302 8.90 1.1 37 θP 3.75 3.85 0.147 0.151 Q2 . 6 5 2 . 95 0.104 0.116

5 Revision history

Table 8. Revision history