STP5NK90Z STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

N-CHANNEL 900V - 2Ω - 4.5A TO-220/TO-220FP Zener-Protected SuperMESH™MOSFET Table 1: General Features I TYPICAL R DS (on) = 2 Ω I EXTREMELY HIGH dv/dt CAPABILITY I IMPROVED ESD CAPABILITY I 100% AVALANCHE RATED I GATE CHARGE MINIMIZED I VERY LOW INTRINSIC CAPACITANCES I VERY GOOD MANUFACTURING REPEATIBILITY

DESCRIPTION

The SuperMESH™ series is obtained through an extreme optimization of ST’s well established stripbased PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOS- FETs including revolutionary MDmesh™ products.

APPLICATIONS

I HIGH CURRENT, HIGH SPEED SWITCHING I IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTORS AND PFC Table 2: Order Codes Figure 1: Package Figure 2: Internal Schematic Diagram TYPE V DSS R DS(on) ID Pw STP5NK90Z STF5NK90Z 900 V 900 V < 2.5 Ω < 2.5 Ω 4.5 A

4.5 A (*)

SALES TYPE MARKING PACKAGE PACKAGING STP5NK90Z P5NK90Z TO-220 TUBE STF5NK90Z F5NK90Z TO-220FP TUBE Rev. 3

Table 3: Absolute Maximum ratings (/circle6 ) Pulse width limited by safe operating area (1) ISD ≤4.5A, di/dt ≤200A/µs, VDD ≤ V(BR)DSS , Tj ≤ TJMAX. (*) Limited only by maximum temperature allowed Table 4: Thermal Data Table 5: Avalanche Characteristics Table 6: Gate-Source Zener Diode PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. Symbol Parameter Value Unit STP5NK90Z STF5NK90Z VDS Drain-source Voltage (VGS = 0) 900 V VDGR Drain-gate Voltage (RGS = 20 kΩ ) 900 V VGS Gate- source Voltage ± 30 V ID Drain Current (continuous) at TC = 25°C 4.5 4.5 (*) A ID Drain Current (continuous) at TC = 100°C 2.8 2.8 (*) A IDM (/circle6 ) Drain Current (pulsed) 18 18 (*) A PTOT Total Dissipation at TC = 25°C 125 30 W Derating Factor 1 0.24 W/ °C VESD(G-S) Gate source ESD(HBM-C=100pF, R=1.5KΩ) 4000 V dv/dt (1) Peak Diode Recovery voltage slope 4.5 V/ns VISO Insulation Withstand Voltage (DC) - 2500 V Tj Tstg Operating Junction Temperature Storage Temperature -55 to 150 -55 to 150 TO-220 TO-220FP Rthj-case Thermal Resistance Junction-case Max 1 4.2 °C/W Rthj-amb Thermal Resistance Junction-ambient Max 62.5 °C/W Tl Maximum Lead Temperature For Soldering Purpose 300 °C Symbol Parameter Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) 4.5 A EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR , VDD = 50 V) 230 mJ Symbol Parameter Test Conditions Min. Typ. Max. Unit BV GSO Gate-Source Breakdown Voltage Igs=± 1mA (Open Drain) 30 V

ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) Table 7: On /Off Table 8: Dynamic Table 9: Source Drain Diode (1) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (2) Pulse width limited by safe operating area. (3) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS . Symbol Parameter Test Conditions Min. Typ. Max. Unit V(BR)DSS Drain-source Breakdown Voltage ID = 1 mA, VGS = 0 900 V IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125°C µA µA IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 20 V ± 10 µA VGS(th) Gate Threshold Voltage VDS = VGS , ID = 100 µA 3 3.75 4.5 V R DS(on Static Drain-source On Resistance VGS = 10 V, ID = 2.25 A 2 2.5 Ω Symbol Parameter Test Conditions Min. Typ. Max. Unit gfs (1) Forward Transconductance V DS = 15 V , ID = 2.25 A 4.8 S C iss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS = 25 V, f = 1 MHz, VGS = 0 1160 105 21.5 pF pF pF C OSS eq (3). Equivalent Output Capacitance VGS = 0 V, VDS = 0 to 720 V 65.5 pF td(on) tr td(off) tf Turn-on Delay Time Rise Time Turn-off-Delay Time Fall Time VDD = 450 V, ID = 2.2 A, R G = 4.7 Ω, VGS = 10 V (see Figure 19) 7.2 ns ns ns ns Q g Q gs Q gd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 720 V, ID = 4.4 A, VGS = 10 V (see Figure 22) 41.5 6.9 21.9 58 nC nC nC Symbol Parameter Test Conditions Min. Typ. Max. Unit ISD ISDM (2) Source-drain Current Source-drain Current (pulsed) 4.5 A A VSD (1) Forward On Voltage ISD = 4.5 A, VGS = 0 1.6 V trr Q rr IRRM Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4.5 A, di/dt = 100 A/µs VDD = 35V (see Figure 20) 518 3.2 12.2 ns µC A trr Q rr IRRM Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4.5 A, di/dt = 100 A/µs VDD = 35V, Tj = 150°C (see Figure 20) 712 4.66 13.1 ns µC A

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

Table 10: Revision History Date Revision Description of Changes 24-Sep-2004 1 First release. 05-Oct-2004 2 Complete datasheet 06-Sep-2005 3 Inserted Ecopack indication

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America