STP5NK65ZFP STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

■ 100% avalanche tested ■ Extremely high dv/dt capability ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Very good manufacturing repeatability ■ Improved ESD capability

Applications

■ Switching application

Description

The SuperMESH™ series is obtained through an extreme optimization of ST’s well established strip-based PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage Power MOSFETs including revolutionary MDmesh™ products Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area

Table 3. Absolute maximum ratings Table 4. Absolute maximum ratings

2 Electrical characteristics

Table 5. On/off states Table 6. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.
  2. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

increases from 0 to 80% VDSS. Table 7. Switching times

integrity. These integrated Zener diodes thus avoid the usage of external components. Table 8. Source Drain Diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.

Table 9. Gate-source Zener diode

2.1 Electrical char acteristics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Transconductance Figure 7. Static drain source on resistance

Figure 14. Normalized BV DSS vs temperature

3 Test circuits

Figure 15. Switching times test circuit for Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped inductive load test Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Dim. mm .xaM.pyT.niM 6.44.4A 7.25.2B 57.25.2D 7.054.0E 157.0F 07.151.11F 5.151.12F 2.559.4G 7.24.21G 4.0101H 612L 6.036.823L 6.018.94L 6.39.25L 4.619.516L 3.997L 2.33aiD 7012510_Rev_J A B H Dia D E L6 L5 F1 F2 F G TO-220FP mechanical data

5 Revision history

Table 10. Document revision history