Datasheet - STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 - N-channel 620 V, 1.28 Ω typ., 4.2 A MDmesh™ K3 Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 27
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 DPAK (TO-252) type A package information
- 4.2 DPAK (TO-252) type C2 package information
- 4.3 DPAK (TO-252) type E package information
- 4.4 DPAK (TO-252) packing information
- 4.5 TO-220FP package information
- 4.6 TO-220 type A package information
- 4.7 IPAK (TO-251) type A package information
- 5 Ordering information
Features
Order code VDS RDS(on)max. ID Package STD5N62K3 620 V 1.6 Ω 4.2 A DPAK STF5N62K3 TO-220FP STP5N62K3 TO-220 STU5N62K3 IPAK
- 100% avalanche tested
- Extremely high dv/dt capability
- Very low intrinsic capacitance
- Improved diode reverse recovery characteristics
- Zener-protected
Applications
- Switching applications
Description
These MDmesh™ K3 Power MOSFETs are the result of improvements applied to STMicroelectronics’ MDmesh™ technology, combined with a new optimized vertical structure. These devices boast an extremely low on-resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications. Product status link STD5N62K3 STF5N62K3 STP5N62K3 STU5N62K3 N-channel 620 V, 1.28 Ω typ., 4.2 A MDmesh™ K3 Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages STD5N62K3, STF5N62K3 STP5N62K3, STU5N62K3 Datasheet DS6792 - Rev 3 - September 2018 For further information contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Limited by maximum junction temperature.
- Pulse width limited by safe operating area.
- I SD ≤ 4.2 A, VDSpeak ≤ V(BR)SS, VDD = 80% V(BR)DSS.
Table 2. Thermal data
- When mounted on 1inch² FR-4 board, 2 oz Cu.
Table 3. Avalanche characteristics
- Pulse width limited by T j max.
2 Electrical characteristics
(TCASE = 25 °C unless otherwise specified) Table 4. On/off states
- Defined by design, not subject to production test.
Table 5. Dynamic
- C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
Table 6. Switching times
Electrical characteristics
Table 7. Source-drain diode Figure 20. Test circuit for inductive load
- Pulse width limited by safe operating area.
- Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
Table 8. Gate-source Zener diode The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. additional external componentry.
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for DPAK and IPAK Figure 2. Thermal impedance for DPAK and IPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-220 Figure 6. Thermal impedance for TO-220
Figure 7. Output characterisics Figure 8. Transfer characteristics Figure 9. Normalized V(BR)DSS vs temperature Figure 10. Static drain-source on-resistance
2.0 I D (A)
Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations
3 Test circuits
Figure 18. Test circuit for resistive load switching times Figure 19. Test circuit for gate charge behavior Figure 20. Test circuit for inductive load switching and Figure 21. Unclamped inductive load test circuit Figure 22. Unclamped inductive waveform Figure 23. Switching time waveform
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3
Package information
4.1 DPAK (TO-252) type A package information
Figure 24. DPAK (TO-252) type A package outline
Table 9. DPAK (TO-252) type A mechanical data
4.2 DPAK (TO-252) type C2 package information
Figure 25. DPAK (TO-252) type C2 package outline
Table 10. DPAK (TO-252) type C2 mechanical data
4.3 DPAK (TO-252) type E package information
Figure 26. DPAK (TO-252) type E package outline
Table 11. DPAK (TO-252) type E mechanical data Figure 27. DPAK (TO-252) recommended footprint (dimensions are in mm)
4.4 DPAK (TO-252) packing information
Figure 28. DPAK (TO-252) tape outline
Figure 29. DPAK (TO-252) reel outline Table 12. DPAK (TO-252) tape and reel mechanical data
4.5 TO-220FP package information
Figure 30. TO-220FP package outline
Table 13. TO-220FP package mechanical data
4.6 TO-220 type A package information
Figure 31. TO-220 type A package outline
Table 14. TO-220 type A package mechanical data
4.7 IPAK (TO-251) type A package information
Figure 32. IPAK (TO-251) type A package outline
Table 15. IPAK (TO-251) type A package mechanical data
5 Ordering information
Table 16. Order codes
Ordering information
Revision history
Table 17. Document revision history – Document status promoted from preliminary data to datasheet. The part number STB5N62K3 has been moved to a separate datasheet. Updated title, features and description on cover page. Section 4 Package information.