N-channel 100 V, 0.0145 typ., 45 A, STripFET™ F7 Power MOSFETs in DPAK, I²PAK and TO-220 packages

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 20

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package information
  • 4.1 DPAK (TO-252) package information
  • 4.2 I²PAK (TO-262) package information
  • 4.3 TO-220 type A package information
  • 5 Packing mechanical data
  • 6 Revision history

Features

  • Among the lowest RDS(on) on the market
  • Excellent figure of merit (FoM)
  • Low Crss/Ciss ratio for EMI immunity
  • High avalanche ruggedness

Applications

  • Switching applications

Description

These N-channel Power MOSFETs utilize STripFET™ F7 technology with an enhanced trench gate structure that results in very low on- state resistance, while also reducing internal capacitance and gate charge for faster and more efficient switching. 1 2 3 TAB TAB DPAK TAB TO-220 I PAK2 $0Y 7$% Order code V DS RDS(on) max. ID PTOT STD45N10F7 100 V 0.018 Ω 45 A 60 WSTI45N10F7 STP45N10F7 Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Pulse width limited by safe operating area.

Table 3. Thermal resistance

  1. When mounted on FR-4 board of 1inch², 2oz Cu, t < 10 sec.

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic Table 6. Switching times

Table 7. Source-drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration= 300 µs, duty cycle 1.5%.

2.1 Electrical charact eristics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Fi gure 5. Transfer characteristics Figure 6. Gate charge vs gate-source voltage Figure 7. Static drain-source on-resistance

10 ID(A)

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package information

specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

4.1 DPAK (TO-252) package information

Figure 19. DPAK (TO-252) type A package outline

Table 8. DPAK (TO-252) type A mechanical data

Figure 20. DPAK footprint (a)

4.2 I²PAK (TO-262) pa ckage information

Figure 21. I²PAK (TO-262) package outline

Table 9. I²PAK (TO-262) mechanical data

4.3 TO-220 type A package information

Figure 22. TO-220 type A package outline

Table 10. TO-220 type A mechanical data

5 Packing mechanical data

Figure 23. Tape

Figure 24. Reel

Table 11. DPAK (TO-252) tape and reel mechanical data

6 Revision history

Table 12. Document revision history 10-Oct-2013 1 First release.