Datasheet - STB42N60M2‑EP, STP42N60M2‑EP, STW42N60M2-EP - N‑channel 600 V, 76 mΩ typ., 34 A MDmesh M2 Power MOSFET in a D²PAK, TO-220 and TO-247 packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 20
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package information
- 4.1 D²PAK (TO-263) type A2 package information
- 4.2 TO-220 type A package information
- 4.3 TO-247 package information
- 4.4 D²PAK packing information
- 5 Ordering information
Features
Order code VDS RDS(on) max. ID STB42N60M2-EP
600 V 87 mΩ 34 ASTP42N60M2-EP
- Extremely low gate charge
- Excellent output capacitance (COSS) profile
- Very low turn-off switching losses
- 100% avalanche tested
- Zener-protected
Applications
- Switching applications
- Tailored for very high frequency converters (f > 150 kHz)
Description
These devices are N-channel Power MOSFETs developed using MDmesh M2 EP enhanced performance technology. Thanks to their strip layout and an improved vertical structure, these devices exhibit low on-resistance, optimized switching characteristics with very low turn-off switching losses, rendering them suitable for the most demanding very high frequency converters. TO-247 1 2 3 TAB TO-220 1 2 3 TAB D PAK2 D(2, TAB) G(1) S(3) AM01476v1_tab Product status links STB42N60M2-EP STP42N60M2-EP STW42N60M2-EP N‑channel 600 V, 76 mΩ typ., 34 A MDmesh M2 Power MOSFET in a D²PAK, TO-220 and TO-247 packages STB42N60M2‑EP, STP42N60M2‑EP, STW42N60M2-EP Datasheet DS10794 - Rev 3 - September 2025 For further information, contact your local STMicroelectronics sales office.
1 Electrical ratings
Table 1. Absolute maximum ratings
- Pulse width limited by safe operating area.
Table 2. Thermal data
- When mounted on a standard 1 inch2 area of FR-4 PCB with 2-oz copper.
Table 3. Avalanche characteristics
2 Electrical characteristics
(TC = 25 °C unless otherwise specified) Table 4. On/off states
- Specified by design, not tested in production.
Table 5. Dynamic
- Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
Table 6. Switching energy
Electrical characteristics
Table 7. Switching times Figure 21. Switching time waveform) Table 8. Source-drain diode
- Pulse width limited by safe operating area.
- Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
2.1 Electrical characteristics (curves)
Figure 1. Safe operating area for D2PAK and TO-220 Figure 2. Normalized transient thermal impedance for Figure 3. Safe operating area for TO-247 Figure 4. Normalized transient thermal impedance for Figure 5. Typical output characteristics Figure 6. Typical transfer characteristics
3 Test circuits
Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior Figure 18. Test circuit for inductive load switching and Figure 19. Unclamped inductive load test circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform
4 Package information
To meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions, and product status are available at: www.st.com. ECOPACK is an ST trademark.
4.1 D²PAK (TO-263) type A2 package information
Figure 22. D²PAK (TO-263) type A2 package outline
Package information
Table 9. D²PAK (TO-263) type A2 package mechanical data DS10794 - Rev 3 page 10/20
Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm) DS10794 - Rev 3 page 11/20
4.2 TO-220 type A package information
Figure 24. TO-220 type A package outline DS10794 - Rev 3 page 12/20
Table 10. TO-220 type A package mechanical data DS10794 - Rev 3 page 13/20
4.3 TO-247 package information
Figure 25. TO-247 package outline DS10794 - Rev 3 page 14/20
Table 11. TO-247 package mechanical data DS10794 - Rev 3 page 15/20
4.4 D²PAK packing information
Figure 26. D²PAK tape drawing (dimensions are in mm) DS10794 - Rev 3 page 16/20
5 Ordering information
Table 12. Order codes
Ordering information
DS10794 - Rev 3 page 17/20
Revision history
Table 13. Document revision history 20-Jan-2015 1 First release. Updated Section 4: Package information.
IMPORTANT NOTICE – READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. In the event of any conflict between the provisions of this document and the provisions of any contractual arrangement in force between the purchasers and ST, the provisions of such contractual arrangement shall prevail. The purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. The purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of the purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. If the purchasers identify an ST product that meets their functional and performance requirements but that is not designated for the purchasers' market segment, the purchasers shall contact ST for more information. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2025 STMicroelectronics – All rights reserved STB42N60M2‑EP, STP42N60M2‑EP, STW42N60M2-EP DS10794 - Rev 3 page 20/20