N-channel 100 V, 2.3 m typ., 180 A STripFET™ VII DeepGATE™ Power MOSFET in a TO-220 package

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 13

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Revision history

Features

  • Ultra low on-resistance
  • 100% avalanche tested

Applications

  • Switching applications

Description

This device utilizes the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. TAB TO-220 $0Y 7$% Order code VDS RDS(on) max. I D STP310N10F7 100 V 2.7 m Ω 180 A Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Current limited by package.
  2. Pulse width limited by safe operating area.
  3. Starting T J=25°C, ID=60 A, VDD=50 V

Table 3. Thermal data

2 Electrical characteristics

(TCASE = 25 °C unless otherwise specified). Table 4. On/off states Table 5. Dynamic Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulse duration = 300µs, duty cycle 1.5%

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Gate charge vs gate-source voltage Figure 7. Static drain-source on-resistance

0 Qg(nC)

2.45 VGS=10V

Figure 8. Capacitance variations Figure 9. Source-drain diode forward Figure 10. Normalized gate threshold voltage vs Figure 11. Normalized on-resistance vs Figure 12. Normalized BVDSS vs temperature

0 TJ(°C)

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

Table 8. TO-220 type A mechanical data

Figure 19. TO-220 type A drawing

5 Revision history

Table 9. Document revision history 19-Oct-2011 1 Initial version. 21-Dec-2011 2 Updated title and description in cover page. Updated ID value at TC = 25°C in the whole document. Document status promoted from preliminary to production data. Added Section 2.1: Electrical characteristics (curves). – Modified: I DSS and VGS(th) values in Table 4.