STD25N10F7 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 21

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

  • Ultra low on-resistance
  • 100% avalanche tested

Applications

  • Switching applications

Description

These devices utilize the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. TAB TAB DPAK TO-220FP TO-220 $0Y Ć7$% Order codes V DSS RDS(on) max.(1) 1. @ V GS = 10 V ID PTOT STD25N10F7 100 V 0.035 Ω 25 A 40 W STF25N10F7 100 V 0.035 Ω 19 A 25 W STP25N10F7 100 V 0.035 Ω 25 A 50 W Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. This value is rated according to R thj-c.
  2. Pulse width limited by safe operating area.

Table 3. Thermal resistance

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

Table 6. Switching times Table 7. Source-drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for DPAK Figure 3. Thermal impedance for DPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for TO-220 Figure 7. Thermal impedance for TO-220

Figure 8. Output characteristics Figure 9. Transfer characteristics Figure 10. Gate charge vs gate-source voltage Figure 11. Static drain-source on-resistance Figure 12. Capacitance variations Figure 13. Normalized gate threshold voltage vs

0 VDS(V)

3 VGS(V)5

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test circuit Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

Table 8. DPAK (TO-252) mechanical data

Figure 23. DPAK (TO-252) drawings

Figure 24. DPAK footprint (a)

Table 9. TO-220FP mechanical data

Figure 25. TO-220FP drawing

Table 10. TO-220 type A mechanical data

Figure 26. TO-220 type A drawings

5 Packaging mechanical data

Table 11. DPAK (TO-252) tape and reel mechanical data

6 Revision history

Table 12. Document revision history 17-Sep-2013 1 First release.