STB22NM60N STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance Application Switching applications

Description

These devices are made using the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area
  3. I SD ≤ 16 A, di/dt ≤ 400 A/µs, VDSpeak ≤ V(BR)DSS, VDD = 80% V(BR)DSS

Table 3. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu

Table 4. Thermal data

2 Electrical characteristics

Table 5. On /off states Table 6. Dynamic

  1. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

increases from 0 to 80% VDS.

Table 7. Switching times Table 8. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characterist ics (curves)

Figure 2. Safe operating area for TO-220, Figure 3. Thermal impedance for TO-220, Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for TO-247 Figure 7. Thermal impedance for TO-247

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test Figure 21. Unclamped inductive wavefo rm Figure 22. Switching time waveform

Package mechanical data STB/F/I/P/W22NM60N 10/23 Doc ID 15853 Rev 4

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 23. TO-220FP drawing Table 9. TO-220FP mechanical data

Table 10. D²PAK (TO-263) mechanical data

Figure 24. D²PAK (TO-263) drawing

Table 11. TO-220 type A mechanical data

Figure 25. TO-220 type A drawing

Table 12. TO-247 mechanical data

Figure 26. TO-247 drawing

Table 13. I²PAK (TO-262) mechanical data

Figure 27. I²PAK (TO-262) drawing

5 Packaging mechanical data

Figure 28. D²PAK footprint (a) Table 14. D²PAK (TO-263) tape and reel mechanical data

6 Revision history

Table 15. Document revision history 02-Jul-2009 1 First release. 18-Feb-2010 2 Document status promoted from preliminary data to datasheet. 27-Aug-2010 3 New package, mechanical data has been inserted: I²PAK. 05-Nov-2011 4 Some value changed in Table 5: On /off states.