N-channel 600V - 0.26 - 20A - TO-220 - TO-220FP - TO-247 FDmesh™ Power MOSFET (with fast diode)

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 15

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

N-channel 600V - 0.26Ω - 20A - TO-220 - TO-220FP - TO-247 FDmesh™ Power MOSFET (with fast diode) General features ■ High dv/dt and avalanche capabilities ■ 100% Avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistancE ■ Tight process control and high manufacturing yields

Description

The FDmesh™ associates all advantages of reduced on-resistance and fast switching with an intrinsic fast-recovery body diode. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID Pw STF20NM60D 600V <0.29 Ω 20A 192W STP20NM60FD 600V <0.29 Ω 20A 45W STW20NM60FD 600V <0.29 Ω 20A 214W TO-247 TO-220FP TO-220 Order codes Part number Marking Package Packaging STF20NM60D F20NM60D TO-220FP Tube STP20NM60FD P20NM60FD TO-220 Tube STW20NM60FD W20NM60FD TO-247 Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Limited only by maximu m temperature allowed
  2. Pulse width limited by safe operating area

Table 2. Thermal resistance Table 3. Avalanche data

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
  2. C oss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS

Table 6. Switching times Table 7. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.

2.1 Electrical characterist ics (curves)

Figure 1. Safe operating area for TO-220 Figure 2. Thermal impedance for TO-220 Figure 3. Safe operating areafor TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Safe operating area for TO-247 Figure 6. Thermal impedance for TO-247

3 Test circuit

Figure 16. Switching times test circuit for Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load Figure 19. Unclamped inductive load test Figure 20. Unclamped inductive wavefo rm Figure 21. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

DIM. mm. inch A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 b2 3.0 3.40 0.118 0.134 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 0.620 e5 . 4 5 0 . 2 1 4 L 14.20 14.80 0.560 0.582 L1 3.70 4.30 0.14 0.17 L2 18.50 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S5 . 5 0 0 . 2 1 6 TO-247 MECHANICAL DATA

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

5 Revision history

Table 8. Revision history