N-channel 60V - 0.06 - 20A - TO-220/TO-220FP STripFET™ II Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 14

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

Features

■ Avalanche rugged technology ■ 100% avalanche tested ■ 175oC operating temperature ■ High dv/dt capability ■ Application oriented characterization

Description

This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature Size™” strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Application ■ Switching applications Internal schematic diagram Type V DSS RDS(on) ID STP20NF06 60V <0.07 Ω 20A STF20NF06 60V <0.07 Ω 20A(1) 1. Refer to soa for the max allowable current value on FP-type due to Rth value 1 TO-220FPTO-220 Order codes Part number Marking Package Packaging STP20NF06 P20NF06 TO-220 Tube STF20NF06 F20NF06 TO-220FP Tube Obsolete Product(s) - Obsolete Product(s)

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Refer to SOA for the max allowable current value on FP-type due to Rth value
  2. Pulse width limited by safe operating area.
  3. I SD ≤ 20A, di/dt ≤ 200A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX

Table 2. Thermal data

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.

Table 5. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area for TO-220 Figure 2. Thermal impedance for TO-220 Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characteristics Figure 6. Transfer characteristics

3 Test circuit

Figure 15. Switching times test circuit for Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test Figure 19. Unclamped inductive wavefo rm Figure 20. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com Obsolete Product(s) - Obsolete Product(s)

A B D E H G F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA Obsolete Product(s) - Obsolete Product(s)

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA Obsolete Product(s) - Obsolete Product(s)

5 Revision history

Table 6. Revision history