N-channel 40 V, 0.0025 , 120 A, D²PAK, TO-220 planar STripFET™ Power MOSFET

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 14

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuits
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

Features

■ 100 % avalanche tested ■ Standard threshold drive Application ■ Switching applications ■ Automotive

Description

This STripFET™ III Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance providing superior switching performances. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings

  1. Current limited by package
  2. Pulse width limited by safe operating area
  3. ISD ≤ 60A, di/dt ≤ 440 A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX.

Table 3. Thermal data

  1. When mounted on FR-4 board, 1inch² 2 oz. Cu.

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 6. Switching times Table 7. Source drain diode

2.1 Electrical characteri stics (curves)

Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Normalized B VDSS vs. temperature Figure 7. Static drain-source on resistance

3 Test circuits

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test Figure 17. Unclamped inductive wavefor m Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Obsolete Product(s) - Obsolete Product(s)

D2PAK (TO-263) mechanical data Dim hcnimm Min Typ Max Min Typ Max 181.0371.006.404.4A 900.0100.032.030.01A 730.0720.039.007.0b 760.0540.007.141.12b 420.0710.006.054.0c 350.0840.063.132.12c 863.0253.053.959.8D 592.005.71D 904.0493.004.0101E 433.005.81E 1.045.2e 802.0291.082.588.41e 426.0095.058.5151H 601.0990.096.294.21J 011.0090.097.292.2L 550.050.004.172.11L 960.0150.057.103.12L 610.04.0R °8°0°8°02V 0079457_M Obsolete Product(s) - Obsolete Product(s)

A 4.40 4.60 0.17 3 0.181 b 0.61 0. 88 0.024 0.0 34 b1 1.14 1.70 0.044 0.066 c0 . 4 8 0.70 0.01 9 0.027 D 15.25 15.75 0.6 0.62 D1 1.27 0.050 E 10 10.40 0. 393 0.409 e 2.40 2.70 0.0 94 0.106 e1 4. 95 5.15 0.1 94 0.202 F1 . 2 3 1.32 0.04 8 0.051 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.0 94 0.107 L1 3 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L302 8.90 1.1 37 ‡P 3.75 3.85 0.147 0.151 Q2 . 6 5 2 . 95 0.104 0.116 Obsolete Product(s) - Obsolete Product(s)

Packaging mechanical data STB200N4F3, STP200N4F3 12/14 Doc ID 13302 Rev 3

5 Packaging mechanical data

  • on sales type DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA Obsolete Product(s) - Obsolete Product(s)

6 Revision history

Table 8. Document revision history