N-channel 100 V, 5.1 m typ., 110 A, STripFET™ VII DeepGATE™ Power MOSFETs in TO-220FP and TO-220 packages
Document overview
- Manufacturer or author: STMICROELECTRONICS
- PDF pages: 16
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package mechanical data
- 5 Revision history
Features
- Ultra low on-resistance
- 100% avalanche tested
Applications
- Switching applications
Description
These devices utilize the 7th generation of design rules of ST’s proprietary STripFET™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R DS(on) in all packages. TO-220TO-220FP TAB $0Y 7$% Order codes V DS RDS(on) max I D PTOT STF110N10F7 100 V 0.007 Ω
45 A 30 W
Table 1. Device summary
1 Electrical ratings
Table 2. Absolute maximum ratings
- This value is rated according to R thj-c.
- Limited by safe operating area.
Table 3. Thermal resistance
2 Electrical characteristics
Table 4. On/off states Table 5. Dynamic Table 6. Switching times
Table 7. Source drain diode
- Pulse width limited by safe operating area.
- Pulsed: pulse duration=300 µs, duty cycle 1.5%
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for TO-220FP Figure 3. Thermal impedance for TO-220FP Figure 4. Safe operating area for TO-220 Figure 5. Thermal impedance for TO-220 Figure 6. Output characteristics Figure 7. Transfer characteristics
Figure 8. Gate charge vs gate-source voltage Figure 9. Static drain-source on-resistance for
0 Qg(nC)
Figure 10. Static drain-source on-resistance for Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs Figure 13. Normalized on-resistance vs
5.3 VGS=10V
Figure 14. Normalized BVDSS vs temperature Figure 15. Source-drain diode forward vs
3 Test circuits
Figure 16. Switching times test circuit for Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load Figure 19. Unclamped inductive load test circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
Table 8. TO-220FP mechanical data
Figure 22. TO-220FP drawing
Table 9. TO-220 type A mechanical data
Figure 23. TO-220 type A drawing
5 Revision history
Table 10. Document revision history 03-Dec-2012 1 Initial release.