STP10NB60SFP STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

N-CHANNEL 10A - 600V - TO-220FP PowerMesh™ IGBT (● ) Pulse width limited by safe operating area ■ HIGHT INPUT IMPEDANCE (VOLTAGE DRIVEN) ■ LOW ON-VOLTAGE DROP ■ HIGH CURRENT CAPABILITY ■ OFF LOSSES INCLUDE TAIL CURRENT

DESCRIPTION

Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH ™ IGBTs, with outstanding performances. The suffix “S” identifies a family optimized achieve minimum on-voltage drop for low frequency applications (<1kHz).

APPLICATIONS

■ LIGHT DIMMER ■ STATIC RELAYS ■ MOTOR CONTROL ABSOLUTE MAXIMUM RATINGS TYPE V CES VCE(sat) IC STGP10NB60SFP 600 < 1.7 V 10 A Symbol Parameter Value Unit VCES Collector-Emitter Voltage (VGS = 0) 600 V VECR Reverse Battery Protection 20 V VGE Gate-Emitter Voltage ± 20 V IC Collector Current (continuous) at TC = 25°C 20 A IC Collector Current (continuous) at TC = 100°C 10 A ICM (/c110 ) Collector Current (pulsed) 80 A PTOT Total Dissipation at TC = 25°C 31.5 W Derating Factor 0.21 W/°C Tstg Storage Temperature –65 to 150 °C Tj Max. Operating Junction Temperature 150 °C TO-220FP INTERNAL SCHEMATIC DIAGRAM

ELECTRICAL CHARACTERISTICS (TCASE = 25 °C UNLESS OTHERWISE SPECIFIED) OFF ON (1) DYNAMIC Rthj-case Thermal Resistance Junction-case Max 4.7 °C/W Rthj-amb Thermal Resistance Junction-ambient Max 62.5 °C/W Rthc-sink Thermal Resistance Case-sink Typ 0.5 °C/W Symbol Parameter Test Conditions Min. Typ. Max. Unit VBR(CES) Collector-Emitter Break-down Voltage IC = 250 µA, VGE = 0, 600 V VBR(CES) Emitter Collector Break-down Voltage IC = 1 mA, VGE = 0, 20 V ICES Collector cut-off Current (VGE = 0) VCE = Max Rating ,Tj =25 °C VCE = Max Rating ,Tj =125 °C 100 µA µA IGES Gate-Emitter Leakage Current (VCE = 0) VGE = ± 20V , VCE = 0 ± 100 nA Symbol Parameter Test Conditions Min. Typ. Max. Unit VGE(th) Gate Threshold Voltage V CE = VGE , IC = 250µA 2.5 5 V VCE(SAT) Collector-Emitter Saturation Voltage VGE =15V, IC = 5 A, Tj= 25°C VGE =15V, IC = 10 A, Tj= 25°C VGE =15V, IC = 10 A, Tj= 125°C 1.15 1.35 1.25 1.7 V V V Symbol Parameter Test Conditions Min. Typ. Max. Unit gfs Forward Transconductance VCE = 25 V , IC =10 A 5S C ies Input Capacitance VCE = 25V, f = 1 MHz, VGE = 0 610 pF C oes Output Capacitance 65 pF C res Reverse Transfer Capacitance 12 pF Q g Gate Charge V CE = 400V, IC = 10 A, VGE = 15V 33 nC ICL Latching Current V clamp= 480V, RG= 1kΩ , Tj= 125°C 20 A

(● )Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (1)Pulse width limited by max. junction temperature. ()Losses Include Also the Tail Symbol Parameter Test Conditions Min. Typ. Max. Unit td(on) Turn-on Delay Time VCC = 480 V, IC = 10 A R G =1 KΩ , VGE = 15 V 0.7 µs tr Rise Time 0.46 µs (di/dt)on Eon Turn-on Current Slope Turn-on Switching Losses VCC = 480 V, IC = 10 A R G =1K Ω , VGE = 15 V 0.6 A/µs mJ Symbol Parameter Test Conditions Min. Typ. Max. Unit tc Cross-over Time Vclamp = 480 V, IC = 10 A, R GE = 1K Ω , VGE = 15 V 2.2 µs tr(Voff) Off Voltage Rise Time 1.2 µs tf Fall Time 1.2 µs Eoff() Turn-off Switching Loss 5.0 mJ tc Cross-over Time Vclamp = 480 V, IC = 10 A, R GE = 1KΩ , VGE = 15 V Tj = 125 °C 3.8 µs tr(Voff) Off Voltage Rise Time 1.2 µs tf Fall Time 1.9 µs Eoff(**) Turn-off Switching Loss 8.0 mJ Thermal ImpedanceSwitching Off Safe Operating Area

Gate Threshold Voltage vs Temperature Transconductance Transfer CharacteristicsOutput Characteristics Collector-Emitter On Voltage vs Temperature Collector-Emitter On Voltage vs Collector Cur- rent

Off Losses vs Gate Resistance Off Losses vs Collector Current Gate Charge vs Gate-Emitter VoltageCapacitance Variations Normalized Break-down Voltage vs Temp. Off Losses vs Temperature

Fig. 2: Test Circuit For Inductive Load SwitchingFig. 1: Gate Charge test Circuit

A B D E H G ¯ F 123F2 L4L5 DIM. mm. inch A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.5 0.045 0.067 F2 1.15 1.5 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 TO-220FP MECHANICAL DATA

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com