STF10N65K3 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
Datasheet sections
- 1 Electrical ratings
- 2 Electrical characteristics
- 2.1 Electrical characteristics (curves)
- 3 Test circuits
- 4 Package mechanical data
- 5 Revision history
Features
■ 100% avalanche tested ■ Extremely high dv/dt capability ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Improved diode reverse recovery characteristics ■ Zener-protected
Applications
■ Switching applications
Description
These SuperMESH3™ Power MOSFETs are the result of improvements applied to STMicroelectronics’ SuperMESH™ technology, combined with a new optimized vertical structure. These devices boast an extremely low on- resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications. Figure 1. Internal schematic diagram
650 V 1 Ω 10 A
Table 1. Device summary
1 Electrical ratings
Table 2. Absolute maximum ratings
- Pulse width limited by safe operating area.
Table 3. Thermal data
2 Electrical characteristics
Table 4. On /off states Table 5. Dynamic
voltage is appropriate to achieve efficient and cost-effective protection of device integrity. The integrated Zener diodes thus eliminate the need for external components. Table 6. Switching times Table 7. Source drain diode
- Pulse width limited by safe operating area.
- Pulsed: Pulse duration = 300 µs, duty cycle 1.5%
Table 8. Gate-source Zener diode
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for TO-220FP Figure 3. Thermal impedance for TO-220FP Figure 4. Safe operating area for TO-220 Figure 5. Thermal impedance for TO-220 Figure 6. Output characteristics Figure 7. Transfer characteristics
3 Test circuits
Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
Table 9. TO-220FP mechanical data
Figure 23. TO-220FP drawing
Figure 24. I 2PAKFP drawing Table 10. I 2PAKFP mechanical data
Table 11. TO-220 type A mechanical data
Figure 25. TO-220 type A drawing
5 Revision history
Table 12. Document revision history