STI13005-1 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

■ STI13005-1 is opposite pin out versus standard IPAK package ■ High voltage capability ■ Low spread of dynamic parameters ■ Very high switching speed Application ■ Switch mode power supplies (AC-DC converters)

Description

The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Figure 1. Internal schematic diagram Table 1. Device summary

1 Electrical ratings

Table 2. Absolute maximum ratings Table 3. Thermal data

2 Electrical characteristics

Tcase = 25 °C unless otherwise specified. Table 4. Electrical characteristics

  1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area Figure 3. Derating curve Figure 4. Reverse biased SOA Figure 5. Output characteristics Figure 6. DC current gain (V CE = 1 V) Figure 7. DC current gain (V CE = 5 V)

3 Test circuits

Figure 14. Inductive load switching test circuit Figure 15. Resistive load switching test circuit

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

DIM. mm. min. typ max. A 2.20 2.40 A1 0. 901 . 1 0 b 0.64 0. 90 b2 0.95 b4 5.20 5.40 c 0.45 0.60 c2 0.4 8 0.60 D 6.00 6.20 E 6.40 6.60 e2 . 2 8 e1 4.40 4.60 H 16.10 L 9.00 9.40 (L1) 0. 801 . 2 0 L2 0. 80 V1 10 o TO-251 (IPAK) mechanical data 0068771_H

5 Revision history

Table 5. Document revision history 18-Feb-2010 1 First release.